Architect-Engineer (A-E) Indefinite Delivery Contracts for Department of Defense Education Activity (DoDEA) Design Center Program
Added: Sep 07, 2017 12:59 pm
Multidiscipline Design and/or other Professional Services are being procured in accordance with the Brooks Architecture-Engineering Act (Brooks A-E Act), 40 U.S.C. § 1101 et seq., and FAR Part 36.6, as required for planning, design and construction phase services in support for the Department of Defense Education Activity (DoDEA) which consists of projects within the Continental United States and its Trust Territories, Cuba, Europe, Japan, and Korea. Upon approval by the Contracting Officer and acceptance by the Contractor, contract capacity may be shared with others provided the proposed work is in support of planning, design and construction phase services for the Department of Defense Education Activity (DoDEA). Work may include but not be limited to any or all of the following: design, drafting, planning, military construction programming, cost estimating, topographic or boundary surveys, on site construction management, shop drawing reviews, preparation of Requests for Proposals (RFPs) for Design/Build Projects, energy reduction studies, independent technical reviews, various engineering studies, site investigations, value engineering services, subsurface geotechnical investigation, testing, and reports, design services for new construction and/or renovation, demolition, and alterations of existing facilities, environmental studies, testing and reports, hazardous materials testing, abatement, and other design services. All work must be performed by or under the direct supervision of licensed professional Architects or Engineers.The Government has the option to award more than one contract from this solicitation. The number of contracts actually awarded will determine the final maximum capacity of each IDIQ contract, but in no case will the total maximum capacity of all awarded IDIQ contracts combined exceed $60M. The proposed contract(s) will be a negotiated firm, fixed-price Indefinite Delivery Indefinite Quantity Contract (IDIQ). Each contract will be issued with a five (5) year base period. Each IDIQ contract will require the Government to order and the contractor to furnish a minimum of $5,000.00 of A-E Services. Prior to award, the Government will negotiate an inflation rate of which will adjust for inflation the IDC rates every twelve (12) months during the life of the contract. Funding shall be cited on individual task orders.Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services.If multiple contracts are awarded under this announcement, the Contracting Officer will consider the following factors in deciding which contractor will be selected to negotiate an order: (1) qualifications to perform the work for each task order, (2) current capacity and ability to accomplish the order in the required time, and (3) equitable distribution of work among the contractors. Price will not be used as a criterion.This announcement is open to all businesses regardless of size. If a large business firm is selected for negotiation, it must comply with the FAR 52.219-9 clause regarding the requirement for a subcontracting plan for that part of work it intends to subcontract. The plan is not required as part of responses to this synopsis, although a narrative discussion, as described in paragraph (h) of the selection criteria, is required. Before a Small Disadvantaged Business is proposed as a potential subcontractor, they must be registered in the database maintained by the U.S. Small Business Administration (PRO-Net). Failure of a proposed small disadvantaged business to be registered in PRO-Net at the time the responses are submitted will result in their elimination as a proposed subcontractor; therefore the prime contractor will not get credit for them as small disadvantaged. The Service Contract Act will apply to this acquisition. To be eligible for contract award, firms must be registered in the System of Award Management (SAM). Register via the SAM Internet site at http://www.sam.gov or by contacting the DoD Electronic Commerce Information Center at 1-888-227-2423.Project Specific Information:No specific projects are identified at this time. Subject to availability of funding, a minimum guarantee of $5,000.00 will be issued at the time of contract award should a seed project not be identified prior to award of the IDIQ(s). As projects are received for execution, use of contracts awarded under this announcement will be considered if A-E Services are to be utilized for planning, design and construction phase services in support of the Department of Defense Education Activity (DoDEA).The A-E shall be responsible for drawing preparation using computer-aided design and drafting (CADD) software or Building Information Modeling (BIM) software, as required by the specific task order. All drawings produced for this contract shall be in compliance with the A/E/C CADD standards as issued by the CADD/GIS Technology Center (http://tsc.wes.army.mil/products/standards/AEC/intro.asp). The Government will only accept the final products, without conversion or reformatting, in the Autodesk suite of software (AutoCAD or Revit). Drawings produced by scanning drawings of record or containing photographic images shall be delivered in a raster format compatible with AutoCAD electronic digital format. GIS information shall adhere to the Tri-Service Spatial Data Standards. Design Analysis and any other reports shall be prepared using MS-Word (.docx). Specifications shall be prepared using SPECSINTACT software. Cost estimates shall be prepared using MII software in work breakdown structure (WBS), narrative documentation utilizing Microsoft Office Word. Firms will also be required to provide documents in .pdf format. The contract requires that the selected firm have on-line access to E-mail via internet for routine exchange of correspondence.All services shall be performed in accordance with DoDEA Education Specifications, Norfolk District Design Guide or applicable Construction Agent Design Guides , as well as, all applicable codes and criteria required for Government work. Facilities shall be fully accessible to meet the requirements of ADAAG and all applicable laws, codes and regulations pertinent to accessibility. All work shall be performed in accordance with Federal Acquisition Regulation (FAR) (https://www.acquisition.gov/FAR/). Designs will be prepared using US standard English units of measure, unless otherwise noted. ProjNet (DrChecks) (https://www.projnet.org) will be used for comment resolution of all design review submittals.Selection Criteria:Selection criteria (a) through (e) are primary selection criteria. The selection criteria (a) through (e) are listed below in descending order of importance (e.g., selection criteria outlined in Specialized Experience and Technical Competence will have greater weight than the selection criteria outlined in Professional Qualifications, etc.). Furthermore, for selection criteria (a) (Specialized Experience and Technical Competence) ONLY, sub-criteria are listed in descending order of importance (e.g., sub-criteria (a) (1) will have greater weight than sub-criteria (a)(2), etc.). This order of importance for sub-criteria is applicable ONLY to selection criteria (a) (Specialized Experience and Technical Competence).Selection criteria (f) through (g) are secondary criteria that are considered technically equal (e.g., weighed equally) and will only be used as a tie-breaker among firms that are essentially technically equal for the primary selection criteria (a) through (e).Recent experience of subcontractors may be submitted to demonstrate applicable experience and competence provided that the nature and extent of all contractor team arrangements are identified and disclosed. Contractors should describe the nature and extent of prior teaming experience with the proposed subcontractors. The Contractor may submit a maximum of 10 projects for consideration.(a) SPECIALIZED EXPERIENCE AND TECHNICAL COMPETENCE:(1) Demonstrate recent (within the last 5 years) experience by the prime firm and its subcontractors which illustrate capability and experience designing primary and secondary educational facilities (elementary/middle/high schools). Demonstrate awareness of educational trends and how facility design can support a dynamic and flexible curriculum. Explain how your innovative school designs support a student centered education, specifically differentiated instruction, multiple modalities, blended learning, and provide for problem-based learning.(2) Demonstrate recent (within the last 5 years) experience by the prime firm and its subcontractors which illustrate capability and experience designing projects using clear span or similar construction methods to allow large, open, flexible spaces and incorporate fully integrated acoustical rated operable wall partitions which contribute to the overall acoustical performance of the building. Higher weight will be given for demonstrating recent experience for this sub-criteria using educational facilities.(3) Demonstrate recent (within the last 5 years) experience by the prime firm and its subcontractors which illustrate consideration of life cycle cost analysis in determining systems to be used as a basis of design and included for construction.(4) Demonstrate recent (within the last 5 years) experience by the prime firm and its subcontractors with regards to energy reduction initiatives for new and existing buildings, to include utilization of renewable energy systems. This experience should demonstrate expertise in the application of current technology and building systems as well as awareness of new technology available or being developed that might yield greater energy savings, with a reasonable up front cost.(5) Demonstrate recent (within the past 5 years) knowledge of high performance sustainable building design and development (SDD) practices including experience by the prime firm and its subcontractors with regard to implementation of federal mandates (including, but not limited to, EPAct 2005, EISA 2007, E.O. 13423, E.O. 13514, UFC 1-200-02) including certification procedures and energy modeling analysis.(6) Demonstrate recent (within the past 5 years) experience in the design of facilities and infrastructure at military installations, paying particular attention to area architecture and conditions, utility systems, landscaping, interior design, value engineering, environmental issues and energy conservation strategies and sustainability focus. Include examples of both design-bid-build (D-B-B), and design-build (D-B) projects, and Sustainment, Restoration, and Modernization (SRM) type projects.(7) Demonstrate recent (within the last 5 years) experience by the prime firm and its subcontractors which illustrate experience in a collaborative effort involving multiple A-E firms where design elements were proposed, discussed, and reviewed for applicability, suitability, cost effectiveness, and maintainability.(8) Demonstrate the ability to prepare construction designs and submit drawings using Building Information Models (BIM) in the AutoDesk Suite of software utilizing AutoCAD and REVIT. Firms shall identify what software versions they are currently utilizing and provide a short history of the firm's adoption and use of BIM. History should include timeline and projects executed with BIM as well as narrative information.(9) Demonstrate the ability to use government furnished programs such as Specsintact (specifications) and M- CACES/MII (cost estimate). Design Team members responsible for construction cost estimating must demonstrate prior experience in use of M-CACES/MII software. Demonstrate the ability to provide data files on CD or DVD, create CAL raster files and pointer file of all CAD drawings, create PDF files of specifications and other documents (This includes scanning documents where direct file conversion to .pdf is not possible), access the Internet and submit data by File Transfer Protocol (ftp) utilizing an ftp client.(b) PROFESSIONAL QUALIFICATIONS: Indefinite delivery contracts will require each A-E to provide the following (either in-house or through a sub consultant) capabilities listed below, at a minimum. Accordingly, each A-E is required to provide information sufficient to demonstrate professional qualifications as outlined below. Required personnel cannot fulfill more than one (1) role on the project team (i.e., a separate employee must be provided for each stated requirement in order to meet the number required). Submitting firms must demonstrate the education, training, registration, overall and relevant experience, and longevity with the firm of key management and technical personnel. Resumes must be provided for each of the personnel listed below. Repeat the resume page, as required, in order to provide information on all personnel referenced. Resumes for survey and drill crews are NOT required.Submitting firms must provide responsive information for ALL of the following: One (1) Project ManagerOne (1) Design Quality ManagerThree (3) Registered ArchitectsOne (1) Certified Landscape ArchitectOne (1) Architectural Hardware Specialist (DHI Certified)Two (2) Certified Interior Designer . Qualified means have a minimum of four (4) years' experience dedicated to interior design AND the following: (a) a degree in Interior Design or Interior Architecture from an accredited university, and (b) have passed the National Certification of Interior Design Qualification (NCIDQ) or be a Certified Interior Design (CID).Two (2) Two registered Electrical EngineersOne (1) Systems Engineer specializing in Communications. Qualified means being (a) Registered Communications Distribution Designer (RCDD) accredited by Building Industry Consulting Service International (BICSI) and (b) having a current, active RCCD registration. This person shall also be a Registered Electrical Engineer.Two (2) Registered Mechanical EngineersTwo (2) Registered Civil EngineersTwo (2) Registered Structural EngineersOne (1) Registered Fire Protection Engineer. Qualified means a registered professional engineer, with a minimum of five (5) years experience dedicated to fire protection engineering, and one of the following: (a) a degree in Fire Protection Engineering from an accredited university or (b) have passed the National Council of Examiners for Engineering and Surveys (NCEES) fire protection engineering examinationOne (1) Registered Environmental EngineerOne (1) Registered Geo-Tech Engineer specializing in geo-technical analysis and reportingA certified soil boring and testing firm. Evidence of lab certification is acceptable in lieu of resume. A Certified Environmental Testing Lab. Evidence of lab certification is acceptable in lieu of resume. One (1) Certified Value Specialist. Qualified means must be CVS certified.Two (2) Certified Cost Estimators or Cost Engineers. Qualified means a degree in Engineering or Architecture with at least 10 years Cost Estimating experience. Design Team members responsible for construction cost estimating must demonstrate prior experience in use of MII software.One (1) Registered Surveyor as well as survey crew personnelOne (1) certified professional in a Guiding Principles Compliance (GPC) assessment process(c) CAPACITY: Ability to perform work to schedules. Firms will be evaluated on their ability to complete multiple taskings simultaneously. Firms shall: (a) show current and projected workload within the firm for at least the next 6 months from the date of this solicitation; (b) address a plan for how they propose to accomplish up to four (4) simultaneous takings in addition to current and projected workload conditions; and (c) provide an organizational chart showing the inter-relationship of the various team members including subcontractors, only the organizational chart may be printed on a folded 11x17 sheet of paper.(d) PAST PERFORMANCE: Firms will be evaluated in terms of work quality, compliance to schedules, and cost controls (with emphasis on projects submitted under factor (a)) as determined from PPIRS and other sources. Submit letters of commendation, awards, previous project evaluations, etc. to show past performance. Firms must provide a chart which demonstrates estimated construction cost versus actual award costs. Firms must also provide a chart which demonstrates actual schedule performance versus established milestones. More recent and relevant projects will be given more weight consideration than those that are less recent and relevant.(e) QUALITY CONTROL PROGRAM: Firms will be evaluated on the acceptability of their internal quality control program used to ensure technical accuracy and discipline coordination of plans and specifications. Describe and define the firm's program/processes for quality control and list the key personnel responsible for the quality control program. Quality control program information submitted shall address and identify the key relationship between safety and quality, particularly in respect to tasks which require site work and site investigations. (f) KNOWLEDGE OF LOCALITIES: Firms must demonstrate familiarity with (primarily, but not limited to) the geographical districts located within the Continental United States and its Trust Territories, Europe, Japan, Korea, Cuba and any other overseas areas where DoDEA facilities are located, and their applicable architecture, building codes, environmental regulations, soil conditions, seismic requirements, and regulatory agencies. Information regarding DoDEA school districts and locations can be found on the DoDEA website. This site includes links to the three major areas (DoDEA-Americas, DoDEA-Europe, & DoDEA-Pacific). It is understood that this represents a wide range of conditions and locations. Information presented shall demonstrate general understanding with specific experience, as applicable.(g) SMALL BUSINESS: ALL OFFERORS (except small businesses) who plan to subcontract portions of the work are required to provide a narrative discussion of their plan for the extent of participation of small business, small disadvantaged business, historically black colleges and universities, and priority institution in the proposed contract team, measured as a percentage of the estimated effort. As a minimum, the narrative shall discuss all of the following contained in paragraphs a. through c. below:a. Subcontracting goals development with small and small disadvantaged businesses in sufficient detail to allow government evaluators to determine that these goals are realistic, justifiable, positive, and in accordance with the Government's goals and policy in order to maximize opportunities for these types of businesses.b. The extent to which small disadvantaged businesses, and where appropriate, historically black colleges and universities/ minority institutions (HBCU/ MI) have been identified for participation as part of the offeror's team.c. The offeror's past and present commitment to providing subcontracting opportunities and encouragement to small and small disadvantaged businesses. If the selected firm intends to submit a plan with lesser goals, it must submit written rationale in the plan why the above goals cannot be met.Boards will only consider the following information: SF 330, as submitted or from ACASS; SF 330, with any required supplemental information; documented performance evaluations, such as from ACASS' DoD contract award data; and the information presented during the interviews of the most highly qualified firms prior to final selection. A board will not assume qualifications which are not clearly stated in a firm's submission or available from ACASS. A board will review the entire submission of each firm and not excerpts or summaries. A firm will not be contacted to clarify or supplement its submission. Other than the cost control matters identified in the Past Performance section above, the Board shall not consider any cost or price factors in accordance with Brooks A-E Act. NOTE. In order to maintain total objectivity in the selection process, phone calls and e-mails to discuss this announcement are discouraged unless absolutely necessary. If a question is presented to the Contracting Officer, it will be at the Contracting Officer's discretion to respond. Personal visits for the purpose of discussing this announcement will not be scheduled. This is not a request for proposal.BIDDER QUESTIONS AND COMMENTS All questions and/or comments should reach the above referenced Contracting Office via ProjNet no later than 29 September 2017, in order that they may be given consideration or actions taken prior to receipt of offers. Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via Bidder Inquiry in ProjNet at http://www.projnet.org/projnet. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency USACE, enter Key for this solicitation listed below, and your e-mail address, click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continue. From this page you may view all bidder inquiries or add inquiry. Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.The Solicitation Number is: W91236-17-R-0024The Bidder Inquiry Key is: DN3SK9-4PNY2YThe Bidder Inquiry System will be unavailable for new inquires 7 days prior to bid opening in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.Organizational Conflict of Interest:This statement provides examples of certain organizational conflicts of interest which are proscribed by Federal Acquisition Regulation Subpart 9.5. The purpose of this statement is to prevent the existence of conflicting roles that might bias a contractor's judgment and to prevent an unfair competitive advantage. The following subsections prescribe a non-exhaustive list of limitations on contracting as the means of avoiding, neutralizing or mitigating organizational conflicts of interest.a. If, under this announcement, the contractor will provide systems engineering and technical direction for a system, but does not have overall contractual responsibility for its development, integration, assembly, checkout or production, the contractor shall not be awarded a subsequent contract to supply the system or any of its major components, or to act as consultant to a supplier of any system, subsystem, or major component utilized for or in connection with any item or other matter that is (directly or indirectly) the subject of the systems engineering and technical direction. The term of this prohibition shall endure for the entire period of this contract and for two (2) years thereafter.b. If, under this announcement, the contractor will prepare and furnish complete specifications covering nondevelopmental items, to be used in a competitive acquisition, the contractor shall not be permitted to furnish these items, either as a prime or subcontractor. The term of this prohibition shall endure for the entire period of this contract performance and for either two (2) years thereafter or the duration of the initial production contract whichever is longer. This rule shall not apply to contractors who furnish specifications or data at Government request or to situations in which contractors act as Government representatives to help Government agencies prepare, refine or coordinate specifications, provided this assistance is supervised and controlled by Government representatives.c. If, under this announcement, the contractor will prepare or assist in preparing a work statement to be used in competitively acquiring a system or services, the contractor shall not supply the system, its major components, or the service unless the contractor is the sole source, the contractor has participated in the development and design work, or more than one contractor has been involved in preparing the work statement. The term of this prohibition shall endure for two (2) years.d. If, under this announcement, the contractor will provide technical evaluation of products or advisory and assistance services, the contractor shall not provide such services if the services relate to the contractor's own or a competitor's products or services unless proper safeguards are established to ensure objectivity.e. If, under this announcement, any personnel of the prime firm or any subcontractor at any tier previously served with the procuring agency in a capacity that provided access to non-public, competitively useful information relevant to the requirements giving rise to this procurement activity, the prime contractor or subcontractor shall avoid deriving an unfair competitive advantage, or the appearance of an unfair competitive advantage, by precluding the use of such non-public, competitively useful information in the preparation of any document responsive to any request of the procuring agency pursuant to this procurement activity.Submission Requirements:See Note 24 for general submission requirements. Additional size limitations include the following: (i) Limit resume of each individual to no more than one page.(ii) Limit example projects to no more than 10 projects.Interested firms having the capabilities to perform this work must submit one hard copy of SF 330 Part I and one copy for the Prime and all consultants in an electronic format searchable in .pdf or MS Word without translation. Interested firms must also submit one hard copy of SF 330 Part II for the prime firm and all consultants and one electronic copy searchable in .pdf or MS Word of the entire submittal to the address below at the time and date below. The SF 330 Part I shall not exceed 65 pages (8.5 x 11). Each side of a sheet of paper is considered one page. Use no smaller than 12 font type. Include the firm's DUNS number in SF 330, Part I, Section H. Facsimile transmissions will not be accepted.Submit SF 330 Parts I and II to: US Army Corps of Engineers, Norfolk District; ATTN: Ms. Joy Wright; 803 Front Street; Norfolk, VA 23510-1096; not later than 2:00 PM on 6 October 2017. Facsimile or email transmissions will not be accepted. THIS IS NOT A REQUEST FOR PROPOSAL.Note 24: This acquisition is for architect-engineer (A-E) services, and is procured in accordance with the Brooks A- E Act as implemented in Subpart 36.6 of the Federal Acquisition Regulation. A-E firms meeting the requirements described in this announcement are invited to submit: (1) a Standard Form (SF) 330, Architect-Engineer Qualifications, Parts I and II, and (2) any requested supplemental data to the procurement office shown. Firms registering for consideration for future Federal A-E projects are encouraged to electronically submit SF 330 Part II, General Qualifications, to ORCA, https://orca.bpn.gov/login.aspx, and to update at least annually. Firms with a SF 330 Part II on file in this central Federal database do not need to submit a Part II for this acquisition unless directed by the announcement. Following an evaluation of the qualifications and performance data submitted, the firm or firms that are considered to be the most highly qualified to provide the type of services required will be chosen for negotiation. Selection of firms for negotiation shall be made in order of preference based on the demonstrated competence and qualifications necessary for satisfactory performance in accordance with the specific selection criteria listed in the announcement. THIS IS NOT A REQUEST FOR PROPOSAL. SOLICITATION PACKAGES WILL NOT BE PROVIDED.
W91236-17-R-0024 Department of the Army Corps of Engineers Engineering District Norfolk
9/7/17, 12:59 PM Architect-Engineering Indefinite Delivery Contracts for Department of Defense Education Activity (DoDEA) Design Center Program
Added: Mar 27, 2017 11:21 am
BACKGROUND. Multi-discipline Architect-Engineering Services are being procured in accordance with Brooks Act, FAR Subpart 36.6, AFARS 5137.590-7 and USACE Acquisition Instruction (UAI) 37.1 to support the Department of Defense Education Activity (DoDEA) Design Center Program. The services include but are not limited to a broad variety of minor to major repairs, sustainment, restoration, modernization, modification, rehabilitation, alternatives and new construction projects primarily in support of the DoDEA program. The type of work performed will include planning, programming, feasibility studies, geotechnical investigations, permitting, charrettes, master planning, engineering studies, design services, estimating, surveying, site/field investigation, CADD drawing and document preparation and review, design review, operability and maintenance review of designs, construction management services, commissioning, studies, and reports. These services will include but are not limited to areas such as facility maintenance, repair, remodeling, renovation, or demolition, infrastructure, interiors refinishing; new construction, anti-terrorism (including and force protection, fire protection, and communications. All work will be performed by or under the direct supervision of licensed professional Architects or Engineers. The work required extends beyond a single project effort, in that it involves the planning and design support for the ongoing DoDEA MILCON and SRM programs. In general terms, the proposed contracts will consist of preparing construction request for proposal packages for either Design-Bid -Build or Design Build projects depending on the individual task order requirements.The Norfolk District, Army Corps of Engineers is contemplating an indefinite delivery indefinite quantity (IDIQ) for multi-discipline Architect-Engineering Services in Support of the Department of Defense Education Activity (DoDEA) Design Center Program. The IDIQ will consist of a five year base period. The amount of the contract shall not exceed $60,000,000 over the five (5) year period to be evenly distributed to up to six (6) Architect-Engineering firms to be selected in the pool. Each task order issued shall be firm-fixed price (as negotiated). Funding shall be cited on individual task orders. Only firms considered highly qualified will be awarded a contract. Prior to award, the Government will negotiate the rate of an escalator which will adjust for inflation the IDIQ rates every twelve (12) months during the life of the contract. Work under this contract will be subject to satisfactory negotiation of individual task orders. Selection of A-E firms is not based upon competitive bidding procedures, but rather upon the professional qualifications necessary for the performance of the required services.SIZE STANDARD. The North American Industrial Classification Code (NAICS) for this procurement is 541330. This announcement is open to all businesses regardless of size. If a large business firm is selected for this announcement, it must comply with the FAR 52.219-9 clause regarding the requirement for a subcontracting plan for that part of work it intends to subcontract.All interested A-E firms are reminded that, in accordance with the provisions of PL 95-507, they will be expected to place subcontracts to the maximum practicable extent consistent with the efficient performance of the contract with small and small disadvantaged firms. Before a Small Disadvantaged Business is proposed as a potential subcontractor, they must be registered in the database maintained by the U.S. Small business Administration (PRO-Net). Failure of a proposed small disadvantaged business to be registered in PRO-Net at the time the responses are submitted will result in their elimination as a proposed subcontractor. To be eligible for contract award, firms must be registered in DoD System for Award Management (SAM). Register via the SAM internet site at https://www.sam.gov or by contracting the DoD Electronic Commerce Information Center at 1-888-227-2423.CONTRACT INFORMATION. No specific projects or tasks are identified at this time and therefore funds are not presently available for the contract. All projects will be design in nature and may include preliminary assessment, site inspection, testing, investigation, planning, studies, and design. Additional detail on the specific activities related to these types of projects will be documented in the Contract.All services shall be performed in accordance with respective Installation Design Guides, as well as, all applicable codes and criteria required for Government work and all applicable laws, codes and regulations pertinent to accessibility. All work shall be performed in accordance with Federal Acquisition Regulation (FAR) (https://www.acquisition.gov/FAR/). Designs will be prepared using US Standard English units of measure, unless otherwise determined by task order ProjNet (DrChecks) (https://www.projnet.org) will be used for comment resolution of all design review submittals. As projects are received for execution, the contract requires that the selected firm have on-line access to E-mail via internet for routine exchange of correspondence and shall have access to an ftp site for exchange of large files.We are requesting that all interested and qualified businesses respond to this sources sought notice with a capability statement similar to your marketing package used in everyday business. At a minimum include: (1) how your company is uniquely capable and qualified to handle tasks associated with this sources sought; (2) summarize your past performance on projects completed which included work identified above. The Government will utilize this information in determining an acquisition strategy. Please state all of the socio-economic categories in which your company belongs (8(a), Hub-zone, Service Disabled Veteran Owned Small Business, Woman Owned). Your capabilities statement must be submitted in writing to the U.S. Army Corps of Engineers, Norfolk, ATTN: Joy Wright, Contracting Office, 803 Front Street, Norfolk, VA 23510. Please submit an original and an electronic copy of your capability package. The electronic copy may be in a pdf or image file format on a DVD or CD. The electronic copy will be used for administrative purposes only and will not be accepted as your response. In case of a discrepancy between the electronic copy and the original, the original will control. The capability statement must be submitted no later than 4:00PM EST on 11 April 2017. Limit capability briefing package to 10 pages. This sources sought should not be construed in any manner to be an obligation of the U.S. Corps of Engineers, Norfolk District to issue a contract, or result in any claim for reimbursement of costs for any effort you expend responding to this request. No solicitation is currently available. Point of Contact is Joy Wright, email: Joy.M.Wright@usace.army.mil.
W91236-17-R-0024 Department of the Army Corps of Engineers Engineering District Norfolk
3/27/17, 11:21 AM