C.10.G the contractor shall engrave recycle symbols into the carton, insert, tube and cap molds for each denomination (one ounce gold, one ounce platinum, half ounce gold, quarter ounce gold, tenth…

C.10.G the contractor shall engrave recycle symbols into the carton, insert, tube and cap molds for each denomination (one ounce gold, one ounce platinum, half ounce gold, quarter ounce gold, tenth ounce gold and one ounce silver). The engraved recycling symbol shall be the size and approximate location per the attached photographs. The depth of the recycle symbol shall be .005 to .015 . The recycle symbol engraving shall be located either on the bottom of the tube or inside the bottom of the coin tubes. C.15 recycle symbols the contractor shall add recycle symbols to the carton, insert, tube, and cap component parts for each denomination ( one ounce gold, one ounce platinum, half ounce gold, quarter ounce gold, tenth ounce gold and one ounce silver). The recycle symbol shall consist of a rounded triangle with arrows with a resin identification code number displayed in the center of the triangle and the resin acronym (PP for polypropylene and ldpe for low density polyethylene) located below the triangle per the attached photographs. The resin identification code shall be in accordance with the society of plastics industry identification coding system and recycling guide. The recycle symbol shall be .005 to .015 inch in thickness. The recycle symbol shall be located either on the bottom of the tube or inside the bottom of the coin tubes. The location and size of the recycle triangle shall be per the attached photographs for each component. The recycle symbol displayed on the lid and base for each denomination shall be the same size and location as the 1 OZ. Silver base and lid photograph (the same mold is used the carton for all denominations. The recycle symbol shall be visible for the life of the part. The recycle symbol shall be visible, legible and easily readable. Contact from the coins in the tube and cap shall not remove the recycle symbols. First article samples of each denomination tube, cap and insert shall be required for mint approval. First article sample of one denomination only, base and lid shall be required for approval.