Title:fabrication of the 2.5 percent juncture flow model the contractor shall fabricate the 2.5 percent juncture flow model in accordance with all sections of this statement of work and supplied…

This firm-fixed-price delivery order was awarded by the Langley Research Center (LaRC), a civilian agency of the U.S. government, to Micro Craft Inc., a small business prime contractor. The contract, valued at $143,997.00, is for the fabrication of a 2.5 percent juncture flow model in support of aeronautics research programs at LaRC. The contract is part of the Reliance Consolidated Models IV (RECOM IV) multiple-award IDIQ vehicle. The work includes fabrication, painting, and delivery of the model hardware, with an option for an additional set of wings. This award is set aside for small businesses.

Title:fabrication of the 2.5 percent juncture flow model the contractor shall fabricate the 2.5 percent juncture flow model in accordance with all sections of this statement of work and supplied contract drawings and files. The contractor shall paint all external surfaces of the model with flat black imron paint. The contractor shall include an estimated cost for one additional pair of wings, assuming the same requirements as 1273292. IT is anticipated the final drawings and electronic file for this wing shall be available about 5/15/2015.the delivery requirement for wing 1273293 is to be delivered with the original model hardware. 3.2 materials the contractor shall provide the materials to fabricate the 2.5 percent juncture flow model in accordance with all sections of this statement of work and supplied contract drawings and files. 3.3 identification applicable drawing numbers shall be permanently marked on each part in an area that is not in an internal or external flow or on a sealing surface. 3.4 structural welding the contractor shall perform any structural welding that is a result of a design requirement in accordance with LPR 1710.15, section 2.5, or the welding code or specification designated by the larc technical project engineer (TPE)/ research project engineer (RPE). All welding shall be qualified to the applicable code. Pre-qualified procedures are not accepted at larc. The NASA larc quality assurance certified welding inspector shall review the contractor S drawings and submittals. The contractor shall provide documentation to show that all welding efforts are done in accordance with the applicable sections of these specifications. The contractor shall submit one (1) copy of the welding procedure and qualification documents, to include the procedure qualification record (PQR), welding procedure specification (WPS), welder qualification record (WQR) as required by asme boiler & pressure vessel code, section IX, for review ten (10) working days prior to start of any welding.