Disk, abrasive surface conditioning. Shall be a mouled abrasive filled surface conditioning roloc bristle disk. Regalite (aluminum oxide and ceramic aluminum oxide mix). 50 grit. Green. Moulded, no…

Disk, abrasive surface conditioning. Shall be a mouled abrasive filled surface conditioning roloc bristle disk. Regalite (aluminum oxide and ceramic aluminum oxide mix). 50 grit. Green. Moulded, no arbor hole, with " roloc" quick change threaded mechanical feature. 5/8 inch taper. 3 inch DIA. 10 disk/BX. ***************mark for usns leroy grumman T AO 195 AL fujairah, UAE mina jebel ALI awarded IAW P/N 18734 and GSA advantage price following the IPD, incorporated and made part of this order L7 disk, abrasive: shall be a moulded abrasive filled surface conditioning roloc bristle disk, used in conjunction with various right angle tools. This product is designed for deburring, blending, finishing, polishing and cleaning surfaces. Shall conform with the following characteristics: type - regalite (aluminum oxide & ceramic aluminum oxide mix) grit - 50 color - green style - moulded, no arbor hole & shall be functionally compatible with 3M " roloc , quick change , threaded style mechanical locking device, back-up pads taper - 5/8 inch size - 3 inch diameter speed rating -18,000 RPM max. Designed use - metal working unit of issue - BX (10 disks per box) product conformance: the products provided shall meet the salient characteristics of this item purchase description, conform to the producer' S own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance. Marking: shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the department of defense (DOD) shall be marked in accordance with MIL-STD-129. Data submission: the material safety data sheet (MSDS) shall be submitted in accordance with the latest revision of federal standard no. 313. For shipments to GSA distribution centers or customer supply centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package (as defined in paragraph 1 of FED-STD-123), if affixed outside, the MSDS must be placed in a weather-resistant envelope. Preparation for delivery: the item(S) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: notice of special requirements for shipment to all countries that have endorsed the IPPC guidelines for treatment of non-manufactured wood packaging: the international plant protection convention (IPPC) has approved and published on march 15, 2002, guidelines for regulating wood packaging material in international trade . Countries endorsing the IPPC guidelines are found at http://WWW.aphis.USDA.GOV/PPQ/SWP/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA regulations and procurement letter procltr 02-17.