Overhaul of the F100-PW-220/220E 3rd stage turbine vanes
Overhaul of the USAF F100-PW-220/220E 3rd stage turbine vanes Tinker AFB, Oklahoma City, Oklahoma 73145 Solicitation # FA812123R0004 The 421st SCMS has an ongoing need for the overhaul of the USAF F100-PW-220/220E 3rd stage turbine vanes. This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Regulation; Federal Acquisition Circular 2022-08, “Small Entity Compliance Guide” This acquisition is Full and Open Competition NAICS Code 336412; Size standard is 1500 The contractor will furnish all facilities, labor, tooling, materials, and equipment to accomplish the repair and reporting and return to the Government in a completely serviceable condition the items of the Air Force listed below, all in accordance with the provisions hereof and the Performance Work Statement (PWS), Rev. 2, dated 8 November 2022. Qualification Requirements apply: To be eligible for contract award, the offeror must be an approved source, in accordance with clause 52.2091, Qualification Requirements. The Government is NOT required to delay contract award to review pending Source Approval Request (SAR). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained, and the source will be reviewed for possible source approval for future awards. End Items Beyond Economical Repair: “Economically Reparable End Items” are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements, when cost of repair will not exceed 75% of the Stock List Price specified in the contract. If the contractor estimates the total cost of the repair and/or overhaul of any end items received will exceed the above percentage of the Stock List Price, the Contractor shall promptly notify the Administrative Contracting Officer (ACO) in writing and shall not perform further services on any such items except at the direction of the ACO. Upon receipt of the written notification that a particular item is not reparable, the Contractor shall dispose of the unit in the manner directed by the ACO. The Procuring Contracting Officer (PCO) may authorize the Contractor, tough the ACO, to exceed the percentage of the Stock List Price in subparagraph (a) above when an item is in critical supply status. This will be a 5-year IDIQ contract which consists of a one year basic and four 1year options for the following National Stock Numbers (NSNs), Part Number (PNs) and Best Estimated Qty’s (BEQ): Noun: Vane Assembly, Compressor, Aircraft Gas Turbine Engine (Critical Safety Item) Input: NSN 2840-01-447-7793, P/N 4084243 Output: NSN 2840-01-447-7793, P/N 4084243 CLIN Type: Firm Fixed Price (FFP) CRITICAL SAFETY ITEM Higher Level Quality Requirements (ISO 9001-2008 or equivalent) Basic Year, CLIN 0001: BEQ 1,008 each (Minimum qty: 84 each, Basic Year Maximum Qty: 1,512 each) 1st Option Year, CLIN 1001: BEQ 1,008 each (Minimum qty: 84 each, Basic Year Maximum Qty: 1,512 each) 2nd Option Year, CLIN 2001: BEQ 1,008 each (Minimum qty: 84 each, Basic Year Maximum Qty: 1,512 each) 3rd Option Year, CLIN 3001: BEQ 1,008 each (Minimum qty: 84 each, Basic Year Maximum Qty: 1,512 each) 4th Option Year, CLIN 4001: BEQ 1,008 each (Minimum qty: 84 each, Basic Year Maximum Qty: 1,512 each) *Minimum Contract Qty: 420 each, Maximum Contract Qty: 7,560 each Requested delivery schedule: Deliver 84 each per month 30 days ARO. Early delivery is acceptable _____________________________________________________________________________________________ Noun: Nozzle, Turbine, Aircraft Gas Turbine Engine (Critical Safety Item) Input: NSN 2840-01-445-5773, P/N 4084183 Output: NSN 2840-01-445-5773, P/N 4084183 CLIN Type: Firm Fixed Price (FFP) CRITICAL SAFETY ITEMS Higher Level Quality Requirements (ISO 9001-2008 or equivalent) Basic Year, CLIN 0001: BEQ 3,000 each (Minimum qty: 250 each, Basic Year Maximum Qty: 4,500 each) 1st Option Year, CLIN 1001: BEQ 3,000 each (Minimum qty: 250 each, Basic Year Maximum Qty: 4,500 each) 2nd Option Year, CLIN 2001: BEQ 3,000 each (Minimum qty: 250 each, Basic Year Maximum Qty: 4,500 each) 3rd Option Year, CLIN 3001: BEQ 3,000 each (Minimum qty: 250 each, Basic Year Maximum Qty: 4,500 each) 4th Option Year, CLIN 4001: BEQ 3,000 each (Minimum qty: 250 each, Basic Year Maximum Qty: 4,500 each) *Minimum Contract Qty: 1,250 each, Maximum Contract Qty: 22,500 each Requested delivery schedule: Deliver 250 each per month 30 days ARO. Early delivery is acceptable _____________________________________________________________________________________________ Noun: Nozzle, Assembly, Turbine Gas Turbine Engine (Critical Safety Item) Input: NSN 2840-01-455-8431, P/N 4084233 Output: NSN 2840-01-455-8431, P/N 4084233 CLIN Type: Firm Fixed Price (FFP) CRITICAL SAFETY ITEMS Higher Level Quality Requirements (ISO 9001-2008 or equivalent) Basic Year, CLIN 0001: BEQ 144 each (Minimum qty: 12 each, Basic Year Maximum Qty: 216 each) 1st Option Year, CLIN 1001: BEQ 144 each (Minimum qty: 12 each, Basic Year Maximum Qty: 216 each) 2nd Option Year, CLIN 2001: BEQ 144 each (Minimum qty: 12 each, Basic Year Maximum Qty: 216 each) 3rd Option Year, CLIN 3001: BEQ 144 each (Minimum qty: 12 each, Basic Year Maximum Qty: 216 each) 4th Option Year, CLIN 4001: BEQ 144 each (Minimum qty: 12 each, Basic Year Maximum Qty: 216 each) *Minimum Contract Qty: 60 each, Maximum Contract Qty: 1,080 each Requested delivery schedule: Deliver 12 each per month 30 days ARO. Early delivery is acceptable _______________________________________________________________________________________________________ Noun: Over & Above CLINs: 0004, 1004, 2004, 3004 and 4004 Unit of Issue: 1 LO Price: TBN as required The Over and Above (O&A) items set forth above are not included in the scope and prices of the basic work items IAW DFARS 252.217-7028 "Over and Above Work" and "Additional Over and Above Work Procedures", any work/performance required by this CLIN shall be accomplished only when directed and authorized by the Administrative Contracting Officer (ACO) or Procurement Contracting Officer (PCO), in conjunction with the necessary Defense Contract Management Agency (DCMA) consultation. _______________________________________________________________________________________________________ Noun: Data & Reports CLINs: 0005, 1005, 2005, 3005 and 4005 Unit of Issue: 1 LO Price: Not Separately Priced Provide data reporting in accordance with the requirements set forth on the Exhibits listed here and attached on the attached DD Form 1423 Contract Data Requirements lists (CDRLs): Exhibit A001- Commercial Asset Visibility (CAV) Reporting Exhibit A002-Contract Depot Maintenance (CDM) Production Reports Exhibit A003-Government Property Inventory Report Exhibit A004-Technical Order Improvement Report and Reply Exhibit A005-Teardown Deficiency Reports Exhibit A006-Deficiency Reports (DR) Exhibit A007-Report of Shipping (Item) and Packaging Discrepancy Exhibit A008-Test/Inspection Reports Exhibit A009-Government Furnished Material (GFM) by National Stock Number (NSN) If you are unable to access the above listed reports, please send an email to AFLCMC/LPEA2 Engineers at AFLCMC.LPEA2.Engineers@us.af.mil and they will assist you. _______________________________________________________________________________________________________ Place of delivery: DLA Distribution Depot Division: Oklahoma 3301 F Ave Central Receiving, Bldg 506, Door 22 Tinker AFB, OK 73145-8000 (USA) FOB point: Origin Please list the following: RIC _______ EZ Code ______ Service Criticality Designator: B DPAS Rating: DO: A1 TERMS, CONDITIONS, PROVISIONS, & CLAUSES that apply to this effort: DFARS 252.211-7003, Item Unique Identification and Valuation, Section (c)(l)(i) applies to the following: NSN: ALL NSNs Marking Type: Direct Part Mark Marking Method: Dot Peen DFARS 252.211-7007, Reporting of Government-Furnished FAR 52.211-14, Notice of Priority Rating for National Defense Emergency Preparedness and Energy Use Program FAR 52.211-15, Defense Priority and Allocation Requirements FAR 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services FAR 52.212-2, Evaluation-Commercial Products and Commercial Services (Nov 2021): a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factor shall be used to evaluate offers: PRICE ONLY (b) Options: The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services - All offerors must include a completed copy of the provision with their offer FAR 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services, applies to this acquisition as follows: (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (Section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L. 115-91). (3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 2402). _X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)). _X_ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) _X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) [Reserved]. __ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). __ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). _X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note). _X_ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313). __ (10) [Reserved]. __ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Sep 2021) (15 U.S.C. 657a). _X_ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Sep 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (13) [Reserved] __ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). __ (ii) Alternate I (Mar 2020) of 52.219-6. __ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). __ (ii) Alternate I (Mar 2020) of 52.219-7. _X_ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)). _X_ (17) (i) 52.219-9, Small Business Subcontracting Plan (Nov 2021) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Nov 2016) of 52.219-9. __ (iii) Alternate II (Nov 2016) of 52.219-9. __ (iv) Alternate III (Jun 2020) of 52.219-9. __ (v) Alternate IV (Sep 2021) of 52.219-9. __ (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)). __ (ii) Alternate I (Mar 2020) of 52.219-13. __ (19) 52.219-14, Limitations on Subcontracting (Sep 2021) (15 U.S.C. 637s). _X_ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)) __ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Sep 2021) (15 U.S.C. 657f). _X_ (22) (i) 52.219-28, Post Award Small Business Program Re-representation (Sep 2021) (15 U.S.C. 632(a)(2)). __ (ii) Alternate I (Mar 2020) of 52.219-28. __ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Sep 2021) (15 U.S.C. 637(m)). __ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Sep 2021) (15 U.S.C. 637(m)). __ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)). __ (26) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)). _X_ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755). _X_ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022) (E.O.13126). _X_ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). _X_ (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246). __ (ii) Alternate I (Feb 1999) of 52.222-26. _X_ (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). __ (ii) Alternate I (Jul 2014) of 52.222-35. _X_ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). __ (ii) Alternate I (Jul 2014) of 52.222-36. _X_ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). _X_ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). _X_ (35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627). __ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). __ (36) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.) __ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) _X_ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693). __ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693). __ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Oct 2015) of 52.223-13. __ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun2014) of 52.223-14. __ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C. 8259b). __ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun 2014) of 52.223-16. _X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513). _X_ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693). _X_ (46) 52.223-21, Foams (Jun2016) (E.O. 13693). _X_ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a). __ (ii) Alternate I (Jan 2017) of 52.224-3. __ (48) 52.225-1, Buy American-Supplies (Nov 2021) (41 U.S.C. chapter 83). __ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Nov 2021) (41 U.S.C. chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108- 78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. __ (ii) Alternate I (Jan 2021) of 52.225-3. __ (iii) Alternate II (Jan 2021) of 52.225-3. __ (iv) Alternate III (Jan 2021) of 52.225-3. __ (50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). _X_ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note). __ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150). _X (55) FAR 52.229-11, Tax on Certain Foreign Procurements—Notice and Representation (Jun 2020) _X_ (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021). __ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). _X_ (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332). __ (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332). __ (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332). __ (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). _X_ (63) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)). __ (64) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. __ (iii) Alternate II (Nov 2021) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: _X_ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67). _X_ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). _X_ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29U.S.C.206 and 41 U.S.C. chapter 67). __ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67). __ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67). _X_ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022). _X_ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706). __ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). FAR 52.215-1, Instructions to Offerors-Competitive Acquisition (Nov 2021) (a) Definitions. As used in this provision- Discussions are negotiations that occur after establishment of the competitive range that may, at the Contracting Officer’s discretion, result in the offeror being allowed to revise its proposal. In writing, "writing," or "written" means any worded or numbered expression that can be read, reproduced, and later communicated, and includes electronically transmitted and stored information. Proposal modification is a change made to a proposal before the solicitation’s closing date and time, or made in response to an amendment, or made to correct a mistake at any time before award. Proposal revision is a change to a proposal made after the solicitation closing date, at the request of or as allowed by a Contracting Officer as the result of negotiations. Time, if stated as a number of days, is calculated using calendar days, unless otherwise specified, and will include Saturdays, Sundays, and legal holidays. However, if the last day falls on a Saturday, Sunday, or legal holiday, then the period shall include the next working day. (b) Amendments to solicitations. If this solicitation is amended, all terms and conditions that are not amended remain unchanged. Offerors shall acknowledge receipt of any amendment to this solicitation by the date and time specified in the amendment(s). (c) Submission, modification, revision, and withdrawal of proposals. (1) Unless other methods (e.g., electronic commerce or facsimile) are permitted in the solicitation, proposals and modifications to proposals shall be submitted in paper media in sealed envelopes or packages (i) addressed to the office specified in the solicitation, and (ii) showing the time and date specified for receipt, the solicitation number, and the name and address of the offeror. Offerors using commercial carriers should ensure that the proposal is marked on the outermost wrapper with the information in paragraphs (c)(1)(i) and (c)(1)(ii) of this provision. (2) The first page of the proposal must show– (i) The solicitation number; (ii) The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available); (iii) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item; (iv) Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror’s behalf with the Government in connection with this solicitation; and (v) Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent’s authority, unless that evidence has been previously furnished to the issuing office. (3) Submission, modification, revision, and withdrawal of proposals. (i) Offerors are responsible for submitting proposals, and any modifications or revisions, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that proposal or revision is due. (ii) (A) Any proposal, modification, or revision received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- (1) If it was transmitted tough an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of proposals; or (2) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or (3) It is the only proposal received. (B) However, a late modification of an otherwise successful proposal that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (iii) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the proposal wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (iv) If an emergency or unanticipated event interrupts normal Government processes so that proposals cannot be received at the office designated for receipt of proposals by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation, the time specified for receipt of proposals will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (v) Proposals may be withdrawn by written notice received at any time before award. Oral proposals in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile proposals, proposals may be withdrawn via facsimile received at any time before award, subject to the conditions specified in the provision at 52.215-5, Facsimile Proposals. Proposals may be withdrawn in person by an offeror or an authorized representative, if the identity of the person requesting withdrawal is established and the person signs a receipt for the proposal before award. (4) Unless otherwise specified in the solicitation, the offeror may propose to provide any item or combination of items. (5) Offerors shall submit proposals in response to this solicitation in English, unless otherwise permitted by the solicitation, and in U.S. dollars, unless the provision at FAR 52.225-17, Evaluation of Foreign Currency Offers, is included in the solicitation. (6) Offerors may submit modifications to their proposals at any time before the solicitation closing date and time, and may submit modifications in response to an amendment, or to correct a mistake at any time before award. (7) Offerors may submit revised proposals only if requested or allowed by the Contracting Officer. (8) Proposals may be withdrawn at any time before award. Withdrawals are effective upon receipt of notice by the Contracting Officer. (d) Offer expiration date. Proposals in response to this solicitation will be valid for 120 days. (e) Restriction on disclosure and use of data. Offerors that include in their proposals data that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, shall- (1) Mark the title page with the following legend: This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed-in whole or in part-for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of-or in connection with-the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [insert numbers or other identification of sheets]; and (2) Mark each sheet of data it wishes to restrict with the following legend: Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal. (f) Contract award. (1) The Government intends to award a contract or contracts resulting from this solicitation to the responsible offeror(s) whose proposal(s) represents the best value after evaluation in accordance with the factors and subfactors in the solicitation. (2) The Government may reject any or all proposals if such action is in the Government’s interest. (3) The Government may waive informalities and minor irregularities in proposals received. (4) The Government intends to evaluate proposals and award a contract without discussions with offerors (except clarifications as described in FAR 15.306(a)). Therefore, the offeror’s initial proposal should contain the offeror’s best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals. (5) The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit cost or prices offered, unless the offeror specifies otherwise in the proposal. (6) The Government reserves the right to make multiple awards if, after considering the additional administrative costs, it is in the Government’s best interest to do so. (7) Exchanges with offerors after receipt of a proposal do not constitute a rejection or counteroffer by the Government. (8) The Government may determine that a proposal is unacceptable if the prices proposed are materially unbalanced between line items or subline items. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more line items is significantly overstated or understated as indicated by the application of cost or price analysis techniques. A proposal may be rejected if the Contracting Officer determines that the lack of balance poses an unacceptable risk to the Government. (9) If a cost realism analysis is performed, cost realism may be considered by the source selection authority in evaluating performance or schedule risk. (10) A written award or acceptance of proposal mailed or otherwise furnished to the successful offeror within the time specified in the proposal shall result in a binding contract without further action by either party. (11) If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (i) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer. (ii) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. (iii) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (iv) A summary of the rationale for award. (v) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror. (vi) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. Alternate I (Oct1997). As prescribed in 15.209(a)(1), substitute the following paragraph (f)(4) for paragraph (f)(4) of the basic provision: (f)(4) The Government intends to evaluate proposals and award a contract after conducting discussions with offerors whose proposals have been determined to be within the competitive range. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals. Therefore, the offeror's initial proposal should contain the offeror's best terms from a price and technical standpoint. FAR 52.217-9, Option to Extend the Term of the Contract (a) The Government may extend the term of this contract by written notice to the Contractor within 30 days provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years. FAR 52.216-18, Ordering (the below dates may change slightly, dependent on the contract award date) (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from 15 Feb 2023 tough 14 Feb 2028. (b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) A delivery order or task order is considered "issued" when— (1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail; (2) If sent by fax, the Government transmits the order to the Contractor's fax number; or (3) If sent electronically, the Government either— (i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or (ii) Distributes the delivery order or task order via email to the Contractor's email address. (d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract. 52.216-19, Order Limitations (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 1 each, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order. The Contractor is not obligated to honor- (1) Any order for a single item in excess of quantity of 250 each; (2) Any order for a combination of items in excess of 31,140 each; or (3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section. (d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. 52.216-22, Indefinite Quantity (the below date may change slightly, dependent on the contract award date) (a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract. (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum." (c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor’s and Government’s rights and obligations with respect to that order to the same extent as if the order were completed during the contract’s effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 14 Feb 2029. FAR 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) FAR 52.229-11, Tax on Certain Foreign Procurements—Notice and Representation (Jun 2020) (a) Definitions. As used in this provision— Foreign person means any person other than a United States person. Specified Federal procurement payment means any payment made pursuant to a contract with a foreign contracting party that is for goods, manufactured or produced, or services provided in a foreign country that is not a party to an international procurement agreement with the United States. For purposes of the prior sentence, a foreign country does not include an outlying area. United States person as defined in 26 U.S.C. 7701(a)(30) means (1) A citizen or resident of the United States; (2) A domestic partnership; (3) A domestic corporation; (4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 701(a)(31)); and (5) Any trust if– (i) A court within the United States is able to exercise primary supervision over the administration of the trust; and (ii) One or more United States persons have the authority to control all substantial decisions of the trust. (b) Unless exempted, there is a 2 percent tax of the amount of a specified Federal procurement payment on any foreign person receiving such payment. See 26 U.S.C. 5000C and its implementing regulations at 26 CFR 1.5000C-1 tough 1.5000C-7. (c) Exemptions from withholding under this provision are described at 26 CFR 1.5000C-1(d)(5) tough (7). The Offeror would claim an exemption from the withholding by using the Department of the Treasury Internal Revenue Service Form W-14, Certificate of Foreign Contracting Party Receiving Federal Procurement Payments, available via the internet at www.irs.gov/w14. Any exemption claimed and self-certified on the IRS Form W-14 is subject to audit by the IRS. Any disputes regarding the imposition and collection of the 26 U.S.C. 5000C tax are adjudicated by the IRS as the 26 U.S.C. 5000C tax is a tax matter, not a contract issue. The IRS Form W-14 is provided to the acquiring agency rather than to the IRS. (d) For purposes of withholding under 26 U.S.C. 5000C, the Offeror represents that (1) It [_] is [_] is not a foreign person; and (2) If the Offeror indicates "is" in paragraph (d)(1) of this provision, then the Offeror represents that—I am claiming on the IRS Form W-14 [__] a full exemption, or [__] partial or no exemption [Offeror shall select one] from the excise tax. (e) If the Offeror represents it is a foreign person in paragraph (d)(1) of this provision, then— (1) The clause at FAR 52.229-12, Tax on Certain Foreign Procurements, will be included in any resulting contract; and (2) The Offeror shall submit with its offer the IRS Form W-14. If the IRS Form W-14 is not submitted with the offer, exemptions will not be applied to any resulting contract and the Government will withhold a full 2 percent of each payment. (f) If the Offeror selects "is" in paragraph (d)(1) and "partial or no exemption" in paragraph (d)(2) of this provision, the Offeror will be subject to withholding in accordance with the clause at FAR 52.229-12, Tax on Certain Foreign Procurements, in any resulting contract. (g) A taxpayer may, for a fee, seek advice from the Internal Revenue Service (IRS) as to the proper tax treatment of a transaction. This is called a private letter ruling. Also, the IRS may publish a revenue ruling, which is an official interpretation by the IRS of the Internal Revenue Code, related statutes, tax treaties, and regulations. A revenue ruling is the conclusion of the IRS on how the law is applied to a specific set of facts. For questions relating to the interpretation of the IRS regulations go to https://www.irs.gov/help/tax-law-questions 52.229-12 Tax on Certain Foreign Procurements (a) Definitions. As used in this clause— Foreign person means any person other than a United States person. United States person, as defined in 26 U.S.C. 7701(a)(30), means– (1) A citizen or resident of the United States; (2) A domestic partnership; (3) A domestic corporation; (4) Any estate (other than a foreign estate, within the meaning of 26 U.S.C. 7701(a)(31)); and (5) Any trust if- (i) A court within the United States is able to exercise primary supervision over the administration of the trust; and (ii) One or more United States persons have the authority to control all substantial decisions of the trust. (b) This clause applies only to foreign persons. It implements 26 U.S.C. 5000C and its implementing regulations at 26 CFR 1.5000C-1 tough 1.5000C-7. (c) (1) If the Contractor is a foreign person and has only a partial or no exemption to the withholding, the Contractor shall include the Department of the Treasury Internal Revenue Service Form W-14, Certificate of Foreign Contracting Party Receiving Federal Procurement Payments, with each voucher or invoice submitted under this contract toughout the period in which this status is applicable. The excise tax withholding is applied at the payment level, not at the contract level. The Contractor should revise each IRS Form W-14 submission to reflect the exemption (if any) that applies to that particular invoice, such as a different exemption applying. In the absence of a completed IRS Form W-14 accompanying a payment request, the default withholding percentage is 2 percent for the section 5000C withholding for that payment request. Information about IRS Form W-14 and its separate instructions is available via the internet at www.irs.gov/w14. (2) If the Contractor is a foreign person and has indicated in its offer in the provision 52.229-11, Tax on Certain Foreign Procurements—Notice and Representation, that it is fully exempt from the withholding, and certified the full exemption on the IRS Form W-14, and if that full exemption no longer applies due to a change in circumstances during the performance of the contract that causes the Contractor to become subject to the withholding for the 2 percent excise tax then the Contractor shall– (i) Notify the Contracting Officer within 30 days of a change in circumstances that causes the Contractor to be subject to the excise tax withholding under 26 U.S.C. 5000C; and (ii) Comply with paragraph (c)(1) of this clause. (d) The Government will withhold a full 2 percent of each payment unless the Contractor claims an exemption. If the Contractor enters a ratio in Line 12 of the IRS Form W-14, the result of Line 11 divided by Line 10, the Government will withhold from each payment an amount equal to 2 percent multiplied by the contract ratio. If the Contractor marks box 9 of the IRS Form W-14 (rather than completes Lines 10 tough 12), the Contractor must identify and enter the specific exempt and nonexempt amounts in Line 15 of the IRS Form W-14; the Government will then withhold 2 percent only from the nonexempt amount. See the IRS Form W-14 and its instructions. (e) Exemptions from the withholding under this clause are described at 26 CFR 1.5000C-1(d)(5) tough (7). Any exemption claimed and self-certified on the IRS Form W-14 is subject to audit by the IRS. Any disputes regarding the imposition and collection of the 26 U.S.C. 5000C tax are adjudicated by the IRS as the 26 U.S.C. 5000C tax is a tax matter, not a contract issue. (f) Taxes imposed under 26 U.S.C. 5000C may not be— (1) Included in the contract price; nor (2) Reimbursed. (g) A taxpayer may, for a fee, seek advice from the Internal Revenue Service (IRS) as to the proper tax treatment of a transaction. This is called a private letter ruling. Also, the IRS may publish a revenue ruling, which is an official interpretation by the IRS of the Internal Revenue Code, related statutes, tax treaties, and regulations. A revenue ruling is the conclusion of the IRS on how the law is applied to a specific set of facts. For questions relating to the interpretation of the IRS regulations go to https://www.irs.gov/help/tax-law-questions DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Dec 2018) applies to this acquisition FAR 52.245-1, Government Property applies to this contract FAR 52.245-9, Use and Charges DFARS 252.245-7001, Tagging, Labeling, and Marking of Government-Furnished Property DFARS 252.245-7002, Reporting Loss of Government Property DFARS 252.245-7003, Contractor Property Management System Administration DFARS 252.245-7004, Reporting, Reutilization, and Disposal (DEVIATION 2022-O0006) FAR 52.246-2, Inspection of Supplies-Fixed-Price (Aug 1996) (a) Definition. "Supplies," as used in this clause, includes but is not limited to raw materials, components, intermediate assemblies, end products, and lots of supplies. (b) The Contractor shall provide and maintain an inspection system acceptable to the Government covering supplies under this contract and shall tender to the Government for acceptance only supplies that have been inspected in accordance with the inspection system and have been found by the Contractor to be in conformity with contract requirements. As part of the system, the Contractor shall prepare records evidencing all inspections made under the system and the outcome. These records shall be kept complete and made available to the Government during contract performance and for as long afterwards as the contract requires. The Government may perform reviews and evaluations as reasonably necessary to ascertain compliance with this paragraph. These reviews and evaluations shall be conducted in a manner that will not unduly delay the contract work. The right of review, whether exercised or not, does not relieve the Contractor of the obligations under the contract. (c) The Government has the right to inspect and test all supplies called for by the contract, to the extent practicable, at all places and times, including the period of manufacture, and in any event before acceptance. The Government shall perform inspections and tests in a manner that will not unduly delay the work. The Government assumes no contractual obligation to perform any inspection and test for the benefit of the Contractor unless specifically set forth elsewhere in this contract. (d) If the Government performs inspection or test on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties. Except as otherwise provided in the contract, the Government shall bear the expense of Government inspections or tests made at other than the Contractor’s or subcontractor’s premises; provided, that in case of rejection, the Government shall not be liable for any reduction in the value of inspection or test samples. (e) (1) When supplies are not ready at the time specified by the Contractor for inspection or test, the Contracting Officer may charge to the Contractor the additional cost of inspection or test. (2) The Contracting Officer may also charge the Contractor for any additional cost of inspection or test when prior rejection makes reinspection or retest necessary. (f) The Government has the right either to reject or to require correction of nonconforming supplies. Supplies are nonconforming when they are defective in material or workmanship or are otherwise not in conformity with contract requirements. The Government may reject nonconforming supplies with or without disposition instructions. (g) The Contractor shall remove supplies rejected or required to be corrected. However, the Contracting Officer may require or permit correction in place, promptly after notice, by and at the expense of the Contractor. The Contractor shall not tender for acceptance corrected or rejected supplies without disclosing the former rejection or requirement for correction, and, when required, shall disclose the corrective action taken. (h) If the Contractor fails to promptly remove, replace, or correct rejected supplies that are required to be removed or to be replaced or corrected, the Government may either (1) by contract or otherwise, remove, replace, or correct the supplies and charge the cost to the Contractor or (2) terminate the contract for default. Unless the Contractor corrects or replaces the supplies within the delivery schedule, the Contracting Officer may require their delivery and make an equitable price reduction. Failure to agree to a price reduction shall be a dispute. (i) (1) If this contract provides for the performance of Government quality assurance at source, and if requested by the Government, the Contractor shall furnish advance notification of the time- (i) When Contractor inspection or tests will be performed in accordance with the terms and conditions of the contract; and (ii) When the supplies will be ready for Government inspection. (2) The Government’s request shall specify the period and method of the advance notification and the Government representative to whom it shall be furnished. Requests shall not require more than 2 workdays of advance notification if the Government representative is in residence in the Contractor’s plant, nor more than 7 workdays in other instances. (j) The Government shall accept or reject supplies as promptly as practicable after delivery, unless otherwise provided in the contract. Government failure to inspect and accept or reject the supplies shall not relieve the Contractor from responsibility, nor impose liability on the Government, for nonconforming supplies. (k) Inspections and tests by the Government do not relieve the Contractor of responsibility for defects or other failures to meet contract requirements discovered before acceptance. Acceptance shall be conclusive, except for latent defects, fraud, gross mistakes amounting to fraud, or as otherwise provided in the contract. (l) If acceptance is not conclusive for any of the reasons in paragraph (k) hereof, the Government, in addition to any other rights and remedies provided by law, or under other provisions of this contract, shall have the right to require the Contractor (1)at no increase in contract price, to correct or replace the defective or nonconforming supplies at the original point of delivery or at the Contractor’s plant at the Contracting Officer’s election, and in accordance with a reasonable delivery schedule as may be agreed upon between the Contractor and the Contracting Officer; provided, that the Contracting Officer may require a reduction in contract price if the Contractor fails to meet such delivery schedule, or (2) within a reasonable time after receipt by the Contractor of notice of defects or nonconformance, to repay such portion of the contract as is equitable under the circumstances if the Contracting Officer elects not to require correction or replacement. When supplies are returned to the Contractor, the Contractor shall bear the transportation cost from the original point of delivery to the Contractor’s plant and return to the original point when that point is not the Contractor’s plant. If the Contractor fails to perform or act as required in paragraph (l)(1) or (l)(2) of this clause and does not cure such failure within a period of 10 days (or such longer period as the Contracting Officer may authorize in writing) after receipt of notice from the Contracting Officer specifying such failure, the Government shall have the right by contract or otherwise to replace or correct such supplies and charge to the Contractor the cost occasioned the Government thereby. The resulting contract will be a rated order under the Defense Priorities and Allocations System (DPAS) 15 CFR 700. AFFARS 5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances (ODS) (OCT 2019) (a) Contractors shall not: (1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or (2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order. [Note: This prohibition does not apply to manufacturing.] (b) For the purposes of Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs: (1) Halons: 1011, 1202, 1211, 1301, and 2402; (2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and (3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide. [NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Air Force definition of a Class I ODS DFARS 252.225-7042 Authorization to Perform (2003) The offeror represents that it has been duly authorized to operate and to do business in the country or countries in which the contract is to be performed. ____________________________________________________________________________________________________ QUOTE SUBMISSION INFORMATION Quotes are due to the point of contact (POCs) below by 3 PM (Central Standard Time) on Thursday, 15 Dec 2022. Primary POC: Ms. Dawn Purtle Contracts Specialist 3001 Staff Dr. Tinker AFB, OK 73145 dawn.purtle.3@us.af.mil 405-496-2686 Alternate POC: Ms. Bonnie Lutz Procurement Contracting Officer (PCO) 3001 Staff Dr. Tinker AFB, OK 73145 bonnie.lutz@us.af.mil Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days. List of Documents, Exhibits, and Other Attachments: Attachment 1 – Performance Work Statement Attachment 2 – Packaging Requirements Attachment 3 – Transportation Data Attachment 4 – Repair Data lists Attachment 5 – Price Matrix Attachment 6 – RQR-PSD-1, Rev-2 Exhibit A – CDRLs (A001-A009) Exhibit B - DIDs
FA8121-23-R-0004 Department of the Air Force Materiel Command Air Force Sustainment Center
11/15/22, 3:11 PM