The Department of the Army awarded L3 Fuzing And Ordnance Systems, Inc. a $4,980,166 firm fixed price delivery order to purchase first article test and production quantities of M762A1/M767A1 Safe and Arm assemblies. Performance will occur in Cincinnati, Ohio through October 2023. As a subsidiary of L3Harris Technologies, L3 Fuzing And Ordnance Systems will utilize Amtec Corp TECH ORD Division as a subcontractor to provide detonators and piston actuators. No set-aside designation was specified...
This is a federal contract award (FA811914D0003|FA811916F0066) from the U.S. Air Force Materiel Command to The Boeing Company, a major aerospace and defense contractor, for the remanufacture of warhead arming devices. The $6,669,665.00 ceiling value contract is a firm-fixed-price delivery order and does not have a set-aside designation. The contract work is being performed at Boeing's facility in Heath, Ohio. The contract includes some subcontracted efforts, with Leach International Corp, TE...
The Department of the Army Materiel Command Contracting Command Detroit Arsenal awarded Design West Technologies Inc. DBA Design West Aratech a firm fixed price delivery order contract valued at approximately $2.77 million. The contract is for the delivery of 300 each fuze setters identified as National Stock Number 1290-0-153-88662 in support of weapon system GZ - Miscellaneous Artillery. Performance will occur in Tustin, California with all work to be completed by January 2024. No set-aside...
This is a firm fixed price delivery order awarded by the U.S. Department of the Air Force Materiel Command to The Boeing Company for the remanufacture of the air launched cruise missile warhead arming device. The contract has a potential value of $7,086,972.00 and a completion date of December 31, 2021. The work is primarily performed in Heath, Ohio. As the prime contractor, Boeing has received numerous federal contracts from the Air Force and other agencies for the repair, overhaul, and...
The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a $148,916.65 firm fixed-price purchase order to Advanced Heat Treat Corporation, doing business as Advanced Heat Treat Corporation, to cover the cost of ion nitride firing pins, hammers, yokes and sleeves urgently needed at Watervliet Arsenal in New York. The contract will provide the parts from July 2022 through June 2023 to support operations at the arsenal, a Defense Department facility that produces...
This delivery order from the Department of the Army Acquisition Support Center Procurement Executive Office Ammunition (DOD - Army - USASC PEO Ammunition) to Action Manufacturing Co. is for a firm fixed price to obligate the minimum guarantee for the M739A1 Point Detonating/Delay (PD/DLY) fuze, which will be applied towards any subsequent delivery order. The place of performance is in Bristol, Pennsylvania and the period of performance is from July 24, 2018 through September 30, 2019. The M739A1...
This firm fixed price delivery order was awarded by the Department of the Army Acquisition Support Center Program Executive Office Ammunition (DOD - Army - USASC) to L3 Fuzing And Ordnance Systems, Inc. for FMU-153 A/B FUZES AND FIRST ARTICLE TESTING. The place of performance was Cincinnati, OH 45245, USA, with a start date of September 27, 2013 and end date of April 30, 2015. The contract was for the procurement of FMU-153 A/B fuzes and the completion of first article testing to verify the...
This is a firm-fixed-price purchase order awarded by the Naval Supply Systems Command to Amtec Corp, a division of Amtec Corporation, for the delivery of 44 first article test samples and additional lot acceptance test samples, production units, and provisioning spares of the Cutter, Cable, Cartridge Actuated, MLU-63/B (DODIC: JM93) over a multi-year period with a total ceiling value of $125,414.82. The award is not associated with a set-aside program. The original solicitation sought these...
This firm fixed price purchase order was awarded by the Department of the Army Materiel Command Aviation and Missile Life Cycle Management Command to L3 Fuzing And Ordnance Systems, Inc. for specialized ammunition and ordnance machining. The contract had a period of performance from December 15, 2005 through January 31, 2007 for $15,000. The place of performance was Cincinnati, Ohio. This contract was likely related to the production of ammunition or ordnance components to support Army...
This is a delivery order under a cost-plus-fixed-fee research and development contract awarded by the Program Executive Office (PEO) Missiles and Space, a component of the U.S. Army, to Alliant Techsystems Operations LLC, a subsidiary of Northrop Grumman Corporation. The contract is for the validation of insensitive munitions (IM) propulsion design for tube-launched, optically tracked, wire-guided (TOW) missiles. The total ceiling value of this delivery order is $2,131,215.00 and the ultimate...