Industry Day for Louisville District USACE upcoming projects at the Seymour Johnson AFB, NC
Added: Feb 17, 2017 3:49 pm
Primary Point of Contact:Sarah Ignaciosarah.k.ignacio@usace.army.mil502-315-6174Time: 01:00-02:00 PM (Eastern) - Informational MeetingThe Industry Day informational presentation will be conducted on Tuesday, 7 March 2017 at 1:00PM EST at the Romano Mazzoli Federal Building (Glass Enclosed Room in the Cafeteria - Basement) in Louisville, Kentucky. All attendees will be required to check-in before 1:00PM EST.All interested attendees should submit the attached form by the response date to confirm attendance at the informational presentation.Project Descriptions:Contract 1: KC-46A Two Bay Corrosion/Fuel Cell Hangar, Seymour Johnson AFB, NC (Design-Bid-Build MILCON)This project is for the construction of an approximately 150,000 square foot (SF) two bay corrosion control and fuel cell hangar; including associated shop, tool, and administration spaces.The Base Proposal will consist of demolition of an existing two bay hangar and construction of the new facility. The new facility will include: concrete slab, structural steel frame, exterior windows, CMU, pre-finished metal wall panel, standing seam metal roof over an insulated metal deck, HVAC and plumbing systems, communication systems, electric work, automatic sprinkler system, low-level high expansion foam fire suppression system in hangar bays, and fire detection system. The Base Proposal also includes all associated site and utility work.The solicitation also will contain several Options. The Options will include items such as finished office/administrative areas totaling approximately 10,500 SF; unfinished enclosed areas totaling approximately 15,800 SF; non-MILCON funded equipment (i.e., 400 Hz converters, compressed air system, breathing air system, fall protection system, aircraft wash system, etc.); and alternate floor finishes in the hangar bays.The furniture package; including standard systems furniture, freestanding furniture, and demountable partitions walls; will be funded, procured, and installed separately from the construction contract. However, the construction contractor will be responsible for the final IT and electrical connections.Type Of Contract And NAICS: This RFP will be for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction.Type Of Set-Aside: This acquisition will be an unrestricted competitive procurement with HUBZone price preference. Size Limitation $36.5M.Selection Process: The proposals will be evaluated using a Best Value Trade-Off source selection process. Proposals will be evaluated using a staggered method in which the Past Performance and Management Plan proposals will be submitted prior to completion of the facility design, with the Small Business Participation Plan, Subcontracting Plan, and Price and Pro Forma proposals being submitted after the final design is issued via an amendment. All evaluation factors, other than cost or price, when combined, are approximately equal to cost or price.Discussions: The Government intends to award without discussions, but reserves the right to conduct discussions should it be deemed in the Government's best interest.Pre-Proposal Conference: A pre-proposal site visit will be held. It is anticipated that the visit will occur the last week of April and details regarding the site visit will be issued with the solicitation.Solicitation Website: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at Federal Business Opportunities website, http://www.fbo.gov. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Federal Business Opportunities website at http://www.fbo.gov. Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors responsibility to check the website periodically for any amendments to the solicitation.Estimated Advertisement Date: April 2017Estimated Closing Date: July 2017Estimated Award Date: September 2017Estimated Performance Period: 730 daysTarget Ceiling: $75,000,000Contract 2: KC-46A Fiscal Year 2017 (FY17) Single Consolidated Contract With Four Projects, Seymour Johnson AFB, NCProject 1: KC-46A ADAL Bldg for AGE/Fuselage Training (Design-Bid-Build MILCON)This project is for the conversion of the existing Corrosion Control Hangar (B4822) into the Fuselage Trainer (FUT) and Aerospace Ground Equipment (AGE) repair. The interior of the building will be altered by installation of all necessary walls and utilities. The hangar door opening will be enclosed and roll up doors will be installed for FUT and AGE access. A covered outdoor storage area for FUT pallets will be constructed, to include the associated concrete pavement required for vehicle circulation. This project is approximately 18,000 SF of renovation and approximately 10,000 SF of new construction.Target Ceiling: $4,987,000Project 2: KC-46A ADAL Squadron Operations Facilities (Design-Bid-Build MILCON)This project is for the renovation of the existing Squadron Operations/Simulator Facility (B4916) and for an addition to the Operations Training Facility (B4906) to accommodate new KC-46A equipment. This project will include upgrading training areas in B4916 to accept the new KC-46A Weapons System Trainer (WST), Boom Operator Trainer (BOT), and Pilot Part Task Trainer (PPTT). This project also includes the construction of an addition to B4906 for climate controlled storage for Aircrew Flight Equipment (AFE). This project is approximately 5,000 SF of renovation and approximately 1,800 SF of new construction.Target Ceiling: $1,954,000Project 3: KC-46A ADAL Maintenance Facility (Design-Bid-Build FSRM)This project is for the renovation of the existing Aircraft Maintenance Facility (B4908) to accommodate maintenance functions for the incoming KC-46A airframe. This project will include a new composite shop and associated administrative space. Repair of the building roof also will be included in this project. This project is approximately 16,000 SF.Estimated Construction Cost: $1,000,000 to $5,000,000Project 4: KC-46A ADAL Supply Areas (Design-Bid-Build FSRM)This project is for the renovation of Building 4810 for secure storage area for the KC-46 airframe support equipment. This project will include the installation of wire partitions, upgrade of lighting in the warehouse area, cleaning of the warehouse area floor. This project is approximately 8,000 SF.Estimated Construction Cost: $1,000,000 to $5,000,000Type Of Contract And NAICS: This RFP will be for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction.Type Of Set-Aside: This acquisition will be a Woman Owned Small Business (WOSB) competitive procurement. Size Limitation $36.5M.Selection Process: The proposals will be evaluated using a Best Value Trade-Off source selection process. Proposals will be evaluated using a staggered method in which the Past Performance and Management Plan proposals will be submitted prior to completion of the facility design, with the Small Business Participation Plan, Subcontracting Plan, and Price and Pro Forma proposals being submitted after the final design is issued via an amendment. All evaluation factors, other than cost or price, when combined, are approximately equal to cost or price.Discussions: The Government intends to award without discussions, but reserves the right to conduct discussions should it be deemed in the Government's best interest.Pre-Proposal Conference: A pre-proposal site visit will be held. It is anticipated that the visit will occur the last week of April and details regarding the site visit will be issued with the solicitation.Solicitation Website: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at Federal Business Opportunities website, http://www.fbo.gov. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Federal Business Opportunities website at http://www.fbo.gov. Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors responsibility to check the website periodically for any amendments to the solicitation.Estimated Advertisement Date: April 2017Estimated Closing Date: August 2017Estimated Award Date: September 2017Estimated Performance Period: 540 days
W912QR-17-R-0025 Department of the Army Corps of Engineers Engineering District Louisville
2/17/17, 3:49 PM Seymour Johnson KC-46A Hangar
Added: Mar 03, 2017 9:15 am
DESCRIPTION: This project is for the construction of an approximately 150,000 square foot (SF) two bay corrosion control and fuel cell hangar; including associated shop, tool, and administration spaces; at Seymour Johnson Air Force Base in Goldsboro, NC.The Base Proposal will consist of demolition of an existing two bay hangar and construction of the new facility. The new facility will include: concrete slab, structural steel frame, exterior windows, CMU, pre-finished metal wall panel, standing seam metal roof over an insulated metal deck, HVAC and plumbing systems, communication systems, electric work, automatic sprinkler system, low-level high expansion foam fire suppression system in hangar bays, and fire detection system. The Base Proposal also includes all associated site and utility work.The solicitation also will contain several Options. The Options will include items such as finished office/administrative areas totaling approximately 10,500 SF; unfinished enclosed areas totaling approximately 15,800 SF; non-MILCON funded equipment (i.e., 400 Hz converters, compressed air system, breathing air system, fall protection system, aircraft wash system, etc.); and alternate floor finishes in the hangar bays.The furniture package; including standard systems furniture, freestanding furniture, and demountable partitions walls; will be funded, procured, and installed separately from the construction contract. However, the construction contractor will be responsible for the final IT and electrical connections.The contract duration is estimated at 730 days.TYPE OF CONTRACT AND NAICS: The RFP will be for one (1) Firm-Fixed-Price (FFP) contract. The North American Industrial Classification System Code (NAICS) for this effort is 236220 - Commercial and Institutional Building Construction.TYPE OF SET-ASIDE: This acquisition will be a Full and Open competitive procurement with 10% HUBZone price evaluation. Size Limitation $36.5M.SELECTION PROCESS: The proposals will be evaluated using a Best Value Trade-Off source selection process. Proposals will be evaluated using a staggered method in which the Past Performance and Management Plan proposals will be submitted prior to completion of the facility design, with the Small Business Participation Plan, Subcontracting Plan, and Price and Pro Forma proposals being submitted after the final design is issued via an amendment. All evaluation factors, other than cost or price, when combined, are approximately equal to cost or price. See Section 00112 of the solicitation, when issued, for additional information regarding the selection process.DISCUSSIONS: The Government intends to award without discussions, but reserves the right to conduct discussions should it be deemed in the Government's best interest.CONSTRUCTION MAGNITUDE: The magnitude of this construction project is anticipated to be between $25,000,000 and $100,000,000 in accordance with DFARS 236.204.ANTICIPATED SOLICITATION RELEASE DATE: The Government anticipates releasing the solicitation on or about 18 April 2017 and approximate closing date is on or about 18 May 2017. It is anticipated that the request for price proposal will be issued on or about 19 May 2017. Actual dates and times will be identified in the solicitation.Responses to this synopsis are not required.SITE VISIT: It is anticipated that the site visit will be held the last week of April 2017. Details regarding the site visit will be issued with the solicitation.SOLICITATION WEBSITE: The official solicitation, when posted, will be available free of charge by electronic posting only and may be found at Federal Business Opportunities website, http://www.fbo.gov. Paper copies of the solicitation will not be issued. Telephone and Fax requests for this solicitation will not be honored. Project files are Portable Document Format (PDF) files and can be viewed, navigated, or printed using Adobe Acrobat Reader. To download the solicitation for this project, contractors are required to register at the Federal Business Opportunities website at http://www.fbo.gov. Amendments, if/when issued, will be posted to the above referenced website for electronic downloading. This will be the only method of distributing amendments prior to closing; therefore, it is the Offerors responsibility to check the website periodically for any amendments to the solicitation.REGISTRATIONS:Offerors shall have and shall maintain an active registration in the following database:System for Award Management (SAM): Offerors shall have and shall maintain an active registration in the SAM database at http://www.sam.gov to be eligible for a Government contract award. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror.POINT-OF-CONTACT: The point-of-contact for this procurement is Contract Specialist, Sarah Ignacio, (502) 315-6174, sarah.k.ignacio@usace.army.mil.
W912QR-17-R-0025 Department of the Army Corps of Engineers Engineering District Louisville
3/3/17, 9:15 AM