GBSD Integrated Command Center - FE Warren AFB
The federal contract opportunity involves the construction of the Integrated Command Center (ICC) at F.E. Warren Air Force Base. The ICC will be a multi-story facility meeting Intelligence Community Directive 705 technical standards and will include site improvements, utilities, pavements, communications, electrical work, and all associated support facilities. The estimated construction cost of this project is between $100,000,000 and $250,000,000, with the contract expected to be awarded on 31st July 2023 and the work to be completed within 900 calendar days after receiving the award.
List of services and products to be provided:
Construction of the ICC Building
Construction of the HEMP Shielding
Construction of Sitework, Utilities, and Pavements
High West Energy scope of work
Environmental Remediation of any contaminated soil or ground water
Cybersecurity documentation and alterations to commercial equipment, devices, firmware and software
Procurement and Installation of Furniture, Fixtures & Equipment
Procurement and Installation of UPS Equipment
Procurement and Installation of LCD Displays, VTC Conference Rooms and Communication Head-sets
Procurement and Installation of Electronic Security Equipment
Procurement and Installation of all Communications & IT Equipment
Excavation & transportation of contaminated soil off site to approved landfill
Additional Filtration for removal of Ground Water Contaminants.
W9128F23R0022 Department of the Army Corps of Engineers Engineering District Omaha
6/13/23, 7:40 PM GBSD Integrated Command Center - FE Warren AFB
At an estimated date of 17 April, this office will issue a solicitation for Construction of Ground Based Strategic Deterrence Integrated Command Center, F. E. Warren Air Force Base, (Cheyenne), Wyoming. This solicitation will use trade-off source selection procedures under the Best-value continuum. Proposals will be tentatively due on 1 June 2023. Total construction is expected to last 900 days. The award type is anticipated to be firm-fixed price (FFP). It is anticipated that FFP, milestone based delivery incentives will be included in the solicitation. No amount is to be charged for solicitation documents. This solicitation is UNRESTRICTED AND OPEN TO BOTH LARGE AND SMALL BUSINESS PARTICIPATION. The construction acquisition method is design-bid-build (construction). Project Description: This project consists of renovating an approximate 60,000 Square Foot (SF) facility to support the Ground Based Strategic Deterrent (GBSD) Intercontinental Ballistic Missile mission at F.E. Warren Air Force Base. This project will include a space or spaces constructed to secure area standard Intelligence Community Directive/Intelligence Community Standard 705 (ICD/ICS 705) See 01 14 00 WORK RESTRICTIONS for additional information and requirements. This project will include space or spaces for emergency power, High-altitude Electromagnetic Pulse (HEMP), and Chemical, Biological, Radiological protection measures. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements and UFC 1-200-02, High Performance and Sustainable Building Requirements. The facility should be compatible with applicable DoD, Air Force, and base design standards. In addition, local materials and construction techniques shall be used where cost effective. This project will comply with DoD antiterrorism/force protection requirements per unified facilities criteria. All work shall be in accordance with RFP documents issued within this solicitation. The Contractor will be required to commence work within 10 days after Notice to Proceed (NTP) and complete the work within 900 calendar days after receipt of NTP. Clauses will be included for Liquidated Damages in case of failure to complete the work in the time allowed. Performance and Payment Bonds will be required. The magnitude of construction costs for this project is between $100,000,000 and $250,000,000. The above project description is for information only. Project scope of work is subject to change. SYSTEM FOR AWARD MANAGEMENT (SAM) REGISTRATION: Please be advised of on-line registration requirements for Contractor Registration and for Representations and Certifications Application which are located in the System for Award Management "SAM" database at https://sam.gov/. The representation and certifications section in SAM are required to be updated annually as a minimum to keep information current, accurate and complete. The electronic annual representations and certifications are effective for one year form the date of initial submission and expire on an annual basis from the update to SAM. OBTAINING SOLICITATION DOCUMENTS: Solicitation documents will be posted to the web via the Contract Opportunities tab at https://sam.gov. Find solicitation announcement in SAM: https://sam.gov/ Click on 'Search Contract Opportunities' under the Contract Opportunities title Use the 'Keywords' block to locate the project by entering the solicitation number or use the various advanced search blocks below the 'Keywords' search block. By using the 'login' feature, it allows additional search features and allows you to keep your searches. Login might be required on some solicitations that are considered restricted. Once you have located your project, click on the link to solicitation to view the project. Files may be downloaded from this view under 'Attachments/Links'. If you want other vendors, sub-contractors, or contractors to contact you, click on the 'Interested Vendors' tab and then "add me to Interested Vendors' link at the bottom of the page. INQUIRIES: A bidder inquiry key will be included in the solicitation. Questions regarding the solicitation will be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet/.
W9128F23R0022 Department of the Army Corps of Engineers Engineering District Omaha
2/15/23, 9:21 AM Sources Sought Announcement - GBSD ICC Facility Generator
SOURCES SOUGHT TECHNICAL DESCRIPTION FOR CUMMINS BRAND FACILITY GENERATORS – GBSD INTEGRATED COMMAND CENTER AT F. E. WARREN AFB, WY INTRODUCTION The US Army Corps of Engineers, Omaha District is issuing this sources sought synopsis as a means of conducting market research to identify potential sources having an interest and industry technologies available to support/provide Facility Generators in the construction of the Ground Based Strategic Deterrent (GBSD) Integrated Command Center at F.E. Warren Air Force Base, Wyoming. The result of this market research will contribute to determining the method of procurement. Based on the responses to this sources sought notice/market research, this requirement may include specifications regarding the facility generators, or, if justified by market research a brand name Justification and Approval. USACE intends to issue one design-bid-build construction contract. The solicitation is anticipated to be full and open competition. The magnitude of construction is expected to range between $100,000,000 and $250,000,000. This sources sought is specific to the facility generators required for this project. NOTE: The Air Force has an approved class J&A for Cummins Brand Name Facility Generators. A copy of that class J&A is attached. This is a supplementary market research effort conducted by the Army to support this specific project. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND The Integrated Command Center (ICC) is a multi-story facility for the new Ground Based Strategic Deterrent Intercontinental Ballistic Missile mission at F.E. Warren Air Force Base. The majority of the facility will meet Intelligence Community Directive 705 (ICD705) technical standards, include mitigation measures for direct hostile teats, emergency power, High-altitude Electromagnetic Pulse (HEMP), and Chemical, Biological, Radiological (CBR) protection measures. Project will include all site improvements, utilities, pavements, communications, electrical work, and all associated support facilities to provide a complete and useable facility, to include a duct bank to ITN. This highly secure facility will be used to provide status of launch centers and launch facilities for the tailored leadership picture and direct the day-to-day activities of the Wing Operations, Maintenance, Security Forces and Cybersecurity personnel operating within the missile field. Program software and Key and Code change capability within this facility allows it to be the primary hub to transfer data on network layers with safe, secure operations. This facility accommodates a crew of 44 personnel as a 24/7 operational facility. In addition to audio/visual, commercial, NIPR, and SIPR communications, there will be a Higher Authority Communication systems and interconnectivity with senior leadership associated with this facility. This project is authorized a generator, per AFI 32-1062. The facility will be designed as permanent construction in accordance with the Department of Defense Unified Facilities Criteria 1-200-01. This project will comply with Department of Defense Antiterrorism/Force Protection requirements per Unified Facilities Criteria 4-010-01. REQUIRED CAPABILITIES The Government requires facility generators for this project. The intent of this Sources Sought is to assess the state-of-the art of the technology available in facility generator products that could be applied to meet this requirement. The Government envisions a solution for facility generators that meets the following operational and program requirements: See attached Air Force Class Justification and Approval - Generators Non-Developmental Item. The facility generators should be a non- developmental item to the maximum extent possible. Qualification. The facility generator must be qualified and demonstrate compliance to the Cummins brand Facility Generators, and all associated components (Reference Attached Specs), capable of supporting a multi-story facility located at F. E. Warren Air Force Base, WY as described in the program background. Proof of qualification should be addressed in the response. Maintenance, Inspection and Repair. The Government desires a system with minimal maintenance and inspection requirements at the organizational level. The system should also be easily repairable for deployed units. Interested vendors should provide information on product warranties, repair technicians availability, and repair response times for their products. SPECIAL REQUIREMENTS Any resulting contract is anticipated to have a security classification level of Controlled Unclassified Information (CUI). Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with DFARS clauses 252.225-7008 and 252.225-7009. ELIGIBILITY The applicable NAICS code for this requirement is 236220 with a Small Business Size Standard of $45M The Product Service Code (PSC) is Y1JZ. The applicable NAICS code for facility generators is 33512 – Motor and Generator Manufacturing with a Small Business Size Standard of 1250 employees. The product service code is 6115 – Generators and Generator Sets, Electrical. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than five 8.5 X 11 inch pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Scott Dwyer in either Microsoft Word or Portable Document Format (PDF), via email Scott.Dwyer@usace.army.mil no later than 12:00 p.m. Central Time on 14 April 2023 and reference this synopsis number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.
W9128F23SM010 Department of the Army Corps of Engineers Engineering District Omaha
3/31/23, 12:35 PM Sources Sought Announcement - GBSD ICC HVAC Chillers
SOURCES SOUGHT TECHNICAL DESCRIPTION FOR TRANE BRAND HVAC CHILLERS – GBSD INTEGRATED COMMAND CENTER, F. E. WARREN AFB, WY INTRODUCTION The US Army Corps of Engineers, Omaha District is issuing this sources sought synopsis as a means of conducting market research to identify potential sources having an interest and industry technologies available to support/provide Chillers in the construction of the Ground Based Strategic Deterrent (GBSD) Integrated Command Center at F.E. Warren Air Force Base, Wyoming. The result of this market research will contribute to determining the method of procurement. Based on the responses to this sources sought notice/market research, this requirement may include specifications regarding the chillers, or, if justified by market research a brand name Justification and Approval. USACE intends to issue one design-bid-build construction contract. The solicitation is anticipated to be full and open competition. The magnitude of construction is expected to range between $100,000,000 and $250,000,000. This sources sought is specific to HVAC chillers required for this project. NOTE: The Air Force has an approved class J&A for Trane Brand Name HVAC Chillers. A copy of that class J&A is attached. This is a supplementary market research effort conducted by the Army to support this specific project. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND The Integrated Command Center (ICC) is a multi-story facility for the new Ground Based Strategic Deterrent Intercontinental Ballistic Missile mission at F.E. Warren Air Force Base. The majority of the facility will meet Intelligence Community Directive 705 (ICD705) technical standards, include mitigation measures for direct hostile teats, emergency power, High-altitude Electromagnetic Pulse (HEMP), and Chemical, Biological, Radiological (CBR) protection measures. Project will include all site improvements, utilities, pavements, communications, electrical work, and all associated support facilities to provide a complete and useable facility, to include a duct bank to ITN. This highly secure facility will be used to provide status of launch centers and launch facilities for the tailored leadership picture and direct the day-to-day activities of the Wing Operations, Maintenance, Security Forces and Cybersecurity personnel operating within the missile field. Program software and Key and Code change capability within this facility allows it to be the primary hub to transfer data on network layers with safe, secure operations. This facility accommodates a crew of 44 personnel as a 24/7 operational facility. In addition to audio/visual, commercial, NIPR, and SIPR communications, there will be a Higher Authority Communication systems and interconnectivity with senior leadership associated with this facility. This project is authorized a generator, per AFI 32-1062. The facility will be designed as permanent construction in accordance with the Department of Defense Unified Facilities Criteria 1-200-01. This project will comply with Department of Defense Antiterrorism/Force Protection requirements per Unified Facilities Criteria 4-010-01. REQUIRED CAPABILITIES The Government requires HVAC chillers for this project. The intent of this Sources Sought is to assess the state-of-the art of the technology available in HVAC chiller products that could be applied to meet this requirement. The Government envisions a solution for HVAC chillers that meets the following operational and program requirements: See attached Air Force Class Justification and Approval – HVAC Chillers. Non-Developmental Item. The HVAC chillers should be a non- developmental item to the maximum extent possible. Qualification. The HVAC chillers must be qualified and demonstrate compliance to the Trane brand HVAC chillers, and all associated components (Reference Attached Specs), capable of supporting a multi-story facility located at F. E. Warren Air Force Base, WY as described in the program background. Proof of qualification should be addressed in the response. Maintenance, Inspection and Repair. The Government desires a system with minimal maintenance and inspection requirements at the organizational level. The system should also be easily repairable for deployed units. Interested vendors should provide information on product warranties, repair technicians availability, and repair response times for their products. SPECIAL REQUIREMENTS Any resulting contract is anticipated to have a security classification level of Controlled Unclassified Information (CUI). Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with DFARS clauses 252.225-7008 and 252.225-7009. ELIGIBILITY The applicable NAICS code for this requirement is 236220 with a Small Business Size Standard of $45M The Product Service Code (PSC) is Y1JZ. The applicable NAICS code for chillers is 333415 – Air Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing with a Small Business Size Standard of 1250 employees. The product service code is 4110, Refrigeration Equipment. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than five pages 8.5 X 11 inch pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Scott Dwyer in either Microsoft Word or Portable Document Format (PDF), via email Scott.Dwyer@usace.army.mil no later than 12:00 p.m. Central Time on 14 April 2023 and reference this synopsis number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.
W9128F23SM008 Department of the Army Corps of Engineers Engineering District Omaha
3/31/23, 12:23 PM Notice of Intent for Brand Name Fire Alarm Panels
THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID. NO SOLICITATION IS CURRENTLY AVAILABLE. DESCRIPTION: U.S. Army Corps of Engineers, Omaha District plans to solicit offers for a Design-Bid-Build (DBB) (construction only) stand-alone firm-fixed-price type contract to construct one (1) GBSD Integrated Command Center at F.E. Warren AFB, Wyoming. The U.S. Army Corps of Engineers (USACE), in accordance with FAR 6.302, intends to specify the following listed item as part of the construction contract. The project includes the sole-source procurement of brand name Fire Alarm Panels. The anticipated brand name is Monaco for the F. E. Warren AFB location. A sources sought was issued under Notice ID W9128F23SM0009 by USACE to complement market research previously completed in 2019 in which the United States Air Force (USAF) completed market research and a Class Justification and Approval (J&A) covering all USAF Fire Alarm Panel purchases including the use of Monaco fire alarm panels at F. E. Warren AFB, WY. The intent of the approved Class J&A is to implement an installation standardization of Fire Alarm Panel manufacturers in order to reduce overall costs and increase overall performance efficiencies. This is not a formal solicitation or request for quote. This synopsis of intent is to give notice of the Government’s intent to use brand name requirements (Monaco) for Fire Alarm Panels for the GBSD Integrated Command Center project at F. E. Warren AFB and to receive any updates for market research purposes. Contractors who can provide the U.S. Army Corps of Engineers with the required services (compatible for Monaco equipment only) are invited to electronically submit an affirmative, written response indicating a bona fide ability to meet this specific requirement. Responses should appear on company letterhead and include, at minimum, affirmation of active registration in the System for Award Management (SAM), your Data Universal Number System (DUNS) number, any applicable processed credentials and qualifications, and any applicable pricing data or information. All responses should include a point of contact, telephone number, and electronic mail address. Additionally, respondents should indicate whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone, service disabled veteran-owned small business, or qualify as socially or economically disadvantaged and whether they are U.S. or foreign owned. Responses to this notice will be used to determine the availability of this type of service. All responsible sources may respond to this synopsis and all responses will be considered by the agency. Responses will be shared with the Government and the project management team, but otherwise will be held in strict confidence. Responses should be furnished electronically to the contacts listed below no later than 12:00PM CST, 1 May 2023.
W9128F23SM009 Department of the Army Corps of Engineers Engineering District Omaha
4/14/23, 3:11 PM