Washer and Dryer Maintenance
Added: Feb 14, 2018 2:27 pm  Section B - Supplies or Services and Prices ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0001 12 Months MaintenanceFFPMaintenance and repair electric clothes washers and electric and gas dryers to include preventive maintenance in accordance with performance work statement paragraphs 5.4, 5.4.1, 5.4.1.1, 5.4.1.2, and 5.8.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0002 300 Each Replace non-repairable washers and dryerFFPReplacement of non-repairable government furnished electric clothes washers and electric and gas clothes dryers in accordance with performance work statement paragraph 5.6. The quantity is an estimate.PURCHASE REQUEST NUMBER: 0010921773-0002FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0003 200 Each Install or Remove Washers and DryersFFPRemove or install and connect government furnished electric clothes washers and electric and gas clothes dryers in accordance with the performance work statement paragraph 5.7. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0004 400 Each Maintenance and RepairFFPMaintenance and repair of new government furnished electric clothes washers and electric and gas clothes dryers added to line item 0001 in accordance with performance work statement paragraph 5.8. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0005 1,000 Linear Foot Replace dryer exhaust vents as requiredFFPReplace dryer exhaust vents as required in accordance with performance work statement paragraph 5.4.2.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0006 1 Each Contractor Manpower ReportingFFPContractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "Not a Direct Cost". Instructions, including the Contractor and Subcontractor User Guides, are available at http://www.ecmra.mil.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1001 12 Months OPTION MaintenanceFFPMaintenance and repair electric clothes washers and electric and gas dryers to include preventive maintenance in accordance with performance work statement paragraphs 5.4, 5.4.1, 5.4.1.1, 5.4.1.2, and 5.8.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1002 300 Each OPTION Replace non-repairable washers and dryerFFPReplacement of non-repairable government furnished electric clothes washers and electric and gas clothes dryers in accordance with performance work statement paragraph 5.6. The quantity is an estimate.PURCHASE REQUEST NUMBER: 0010921773-0002FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1003 200 Each OPTION Install or Remove Washers and DryersFFPRemove or install and connect government furnished electric clothes washers and electric and gas clothes dryers in accordance with the performance work statement paragraph 5.7. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1004 400 Each OPTION Maintenance and RepairFFPMaintenance and repair of new government furnished electric clothes washers and electric and gas clothes dryers added to line item 0001 in accordance with performance work statement paragraph 5.8. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1005 1,000 Linear Foot OPTION Replace dryer exhaust vents as requiredFFPReplace dryer exhaust vents as required in accordance with performance work statement paragraph 5.4.2.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT1006 1 Each OPTION Contractor Manpower ReportingFFPContractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "Not a Direct Cost". Instructions, including the Contractor and Subcontractor User Guides, are available at http://www.ecmra.mil.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2001 12 Months OPTION MaintenanceFFPMaintenance and repair electric clothes washers and electric and gas dryers to include preventive maintenance in accordance with performance work statement paragraphs 5.4, 5.4.1, 5.4.1.1, 5.4.1.2, and 5.8.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2002 300 Each OPTION Replace non-repairable washers and dryerFFPReplacement of non-repairable government furnished electric clothes washers and electric and gas clothes dryers in accordance with performance work statement paragraph 5.6. The quantity is an estimate.PURCHASE REQUEST NUMBER: 0010921773-0002FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2003 200 Each OPTION Install or Remove Washers and DryersFFPRemove or install and connect government furnished electric clothes washers and electric and gas clothes dryers in accordance with the performance work statement paragraph 5.7. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2004 400 Each OPTION Maintenance and RepairFFPMaintenance and repair of new government furnished electric clothes washers and electric and gas clothes dryers added to line item 0001 in accordance with performance work statement paragraph 5.8. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2005 1,000 Linear Foot OPTION Replace dryer exhaust vents as requiredFFPReplace dryer exhaust vents as required in accordance with performance work statement paragraph 5.4.2.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT2006 1 Each OPTION Contractor Manpower ReportingFFPContractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "Not a Direct Cost". Instructions, including the Contractor and Subcontractor User Guides, are available at http://www.ecmra.mil.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3001 12 Months OPTION MaintenanceFFPMaintenance and repair electric clothes washers and electric and gas dryers to include preventive maintenance in accordance with performance work statement paragraphs 5.4, 5.4.1, 5.4.1.1, 5.4.1.2, and 5.8.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3002 300 Each OPTION Replace non-repairable washers and dryerFFPReplacement of non-repairable government furnished electric clothes washers and electric and gas clothes dryers in accordance with performance work statement paragraph 5.6. The quantity is an estimate.PURCHASE REQUEST NUMBER: 0010921773-0002FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3003 200 Each OPTION Install or Remove Washers and DryersFFPRemove or install and connect government furnished electric clothes washers and electric and gas clothes dryers in accordance with the performance work statement paragraph 5.7. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3004 400 Each OPTION Maintenance and RepairFFPMaintenance and repair of new government furnished electric clothes washers and electric and gas clothes dryers added to line item 0001 in accordance with performance work statement paragraph 5.8. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3005 1,000 Linear Foot OPTION Replace dryer exhaust vents as requiredFFPReplace dryer exhaust vents as required in accordance with performance work statement paragraph 5.4.2.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT3006 1 Each OPTION Contractor Manpower ReportingFFPContractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "Not a Direct Cost". Instructions, including the Contractor and Subcontractor User Guides, are available at http://www.ecmra.mil.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4001 12 Months OPTION MaintenanceFFPMaintenance and repair electric clothes washers and electric and gas dryers to include preventive maintenance in accordance with performance work statement paragraphs 5.4, 5.4.1, 5.4.1.1, 5.4.1.2, and 5.8.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4002 300 Each OPTION Replace non-repairable washers and dryerFFPReplacement of non-repairable government furnished electric clothes washers and electric and gas clothes dryers in accordance with performance work statement paragraph 5.6. The quantity is an estimate.PURCHASE REQUEST NUMBER: 0010921773-0002FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4003 200 Each OPTION Install or Remove Washers and DryersFFPRemove or install and connect government furnished electric clothes washers and electric and gas clothes dryers in accordance with the performance work statement paragraph 5.7. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4004 400 Each OPTION Maintenance and RepairFFPMaintenance and repair of new government furnished electric clothes washers and electric and gas clothes dryers added to line item 0001 in accordance with performance work statement paragraph 5.8. The quantity is an estimate.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4005 1,000 Linear Foot OPTION Replace dryer exhaust vents as requiredFFPReplace dryer exhaust vents as required in accordance with performance work statement paragraph 5.4.2.FOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT4006 1 Each OPTION Contractor Manpower ReportingFFPContractor is required to provide data on Contractor labor hours (including subcontractor labor hours) for performance of this contract IAW the PWS. The cost, if any, for providing this data shall be entered into the space provided at this CLIN. If no direct cost is associated with providing the data, enter "Not a Direct Cost". Instructions, including the Contractor and Subcontractor User Guides, are available at http://www.ecmra.mil.FOB: DestinationNET AMTSection E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMSSupplies/services will be inspected/accepted at:CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 1006 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 2006 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 3003 Destination Government Destination Government 3004 Destination Government Destination Government 3005 Destination Government Destination Government 3006 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government 4003 Destination Government Destination Government 4004 Destination Government Destination Government 4005 Destination Government Destination Government 4006 Destination Government Destination Government Section F - Deliveries or Performance DELIVERY INFORMATIONCLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC 0001 POP 01-APR-2018 TO31-MAR-2019 N/A FORT JACKSONFORT JACKSONCRP BLDG 2601 DOOR 7, WASHINGTON RD.COLUMBIA SC 29207FOB: Destination W56GFQ 0002 POP 01-APR-2018 TO31-MAR-2019 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 0003 POP 01-APR-2018 TO31-MAR-2019 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 0004 POP 01-APR-2018 TO31-MAR-2019 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 0005 POP 01-APR-2018 TO31-MAR-2019 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 0006 POP 01-APR-2018 TO31-MAR-2019 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1001 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1002 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1003 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1004 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1005 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 1006 POP 01-APR-2019 TO31-MAR-2020 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2001 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2002 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2003 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2004 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2005 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 2006 POP 01-APR-2020 TO31-MAR-2021 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3001 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3002 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3003 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3004 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3005 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 3006 POP 01-APR-2021 TO31-MAR-2022 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4001 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4002 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4003 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4004 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4005 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ 4006 POP 01-APR-2022 TO31-MAR-2023 N/A (SAME AS PREVIOUS LOCATION)FOB: Destination W56GFQ Section G - Contract Administration Data CLAUSES INCORPORATED BY REFERENCE252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012CLAUSES INCORPORATED BY FULL TEXT252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)(a) Definitions. As used in this clause--Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submissionof Payment Requests and Receiving Reports.(c) WAWF access. To access WAWF, the Contractor shall--(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests toughWAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:(1) Document type. The Contractor shall use the following document type(s).2 and 1 Combo(Contracting Officer: Insert applicable document type(s). Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and"Receiving Report" (stand-alone) document type may be used instead.)(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.Installation Management Command (IMCOM), Fort Jackson, SC W56GFQ(Contracting Officer: Insert inspection and acceptance locations or "Not applicable".)(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in thesystem.Routing Data Table*--------------------------------------------------------------------------------------------Field Name in WAWF Data to be entered in WAWF--------------------------------------------------------------------------------------------Pay Official DoDAAC HQ0490Issue By DoDAAC W9124CAdmin DoDAAC W9124CInspect By DoDAAC W56GFQShip To Code W56GFQShip From Code TBDMark For Code N/AService Approver (DoDAAC) W56GFQService Acceptor (DoDAAC) W56GFQAccept at Other DoDAAC N/ALPO DoDAAC N/ADCAA Auditor DoDAAC N/AOther DoDAAC(s) N/A--------------------------------------------------------------------------------------------(*Contracting Officer: Insert applicable DoDAAC information or "See schedule" if multiple ship to/acceptance locations apply, or "Not applicable.")(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system.TBD(Contracting Officer: Insert applicable email addresses or "Not applicable.")(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.TBD(Contracting Officer: Insert applicable information or "Not applicable.")(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.(End of clause)Section H - Special Contract RequirementsINSURANCEThe following kinds and minimum amounts of insurance are required in accordance with FAR clause52.228-5 entitled, "Insurance - Work on a Government Installation."KIND: AMOUNT:Workmen's Compensation Amount required by the State in which this contract is performed andOccupational Disease InsuranceEmployer's Liability Insurance $100,000Comprehensive General Liability $500,000 per occurrenceInsurance for Bodily InjuryComprehensive Automobile Liability $200,000 per person$500,000 per occurrence for Bodily Injury and$20,000 per occurrence for Property DamageMedical Liability Insurance $1,000,000 per occurrence/ $3,000,000 in the aggregateGeneral Liability Insurance: General liability insurance coverage written on the comprehensiveform of policy, is required in the amount of $500,000.00 per occurrence for bodily injury, and $50,000 peroccurrence for property damage. The deductibles under such policy shall not be greater than (i) $10,000 per personor $25,000 per occurrence for bodily injury or (ii) $10,000 for property damage.Section I - Contract ClausesCLAUSES INCORPORATED BY REFERENCE52.203-3 Gratuities APR 1984 52.203-12 Limitation On Payments To Influence Certain Federal Transactions OCT 2010 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights APR 2014 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper MAY 2011 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2016 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.228-5 Insurance - Work On A Government Installation JAN 1997 52.232-18 Availability Of Funds APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.237-2 Protection Of Government Buildings, Equipment, And Vegetation APR 1984 52.242-13 Bankruptcy JUL 1995 52.242-15 Stop-Work Order AUG 1989 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.205-7000 Provision Of Information To Cooperative Agreement Holders DEC 1991 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism OCT 2015 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials SEP 2014 252.223-7008 Prohibition of Hexavalent Comium JUN 2013 252.226-7001 Utilization of Indian Organizations and Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns SEP 2004 252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel JUN 2013 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.247-7023 Transportation of Supplies by Sea APR 2014CLAUSES INCORPORATED BY FULL TEXT52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (NOV 2017)(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).___ (5) [Reserved]___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).XX (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).____ (10) [Reserved]____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).____ (ii) Alternate I (NOV 2011) of 52.219-3.____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).____ (ii) Alternate I (JAN 2011) of 52.219-4.____ (13) [Reserved]____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).____ (ii) Alternate I (NOV 2011).____ (iii) Alternate II (NOV 2011).____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).____ (ii) Alternate I (Oct 1995) of 52.219-7.____ (iii) Alternate II (Mar 2004) of 52.219-7.XX (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).____ (ii) Alternate I (Nov 2016) of 52.219-9.____ (iii) Alternate II (Nov 2016) of 52.219-9.____ (iv) Alternate III (Nov 2016) of 52.219-9.____ (v) Alternate IV (Nov 2016) of 52.219-9.____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).XX (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).____ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).XX (22) 52.219-28, Post Award Small Business Program Representation (July 2013) (15 U.S.C. 632(a)(2)).____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).XX(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).XX (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).XX (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).XX (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).XX (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).XX (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).XX (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).XX (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).____ (ii) Alternate I (OCT 2015) of 52.223-13.____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).____ (ii) Alternate I (Jun 2014) of 52.223-14.____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).____ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).____ (ii) Alternate I (Jun 2014) of 52.223-16.XX (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).____ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).____ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).____ (ii) Alternate I (JAN 2017) of 52.224-3.____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.____ (ii) Alternate I (May 2014) of 52.225-3.____ (iii) Alternate II (May 2014) of 52.225-3.____ (iv) Alternate III (May 2014) of 52.225-3.____ (48) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).XX (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).XX (55) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332).____ (56) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332).____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).____ (ii) Alternate I (Apr 2003) of 52.247-64.(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).XX (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).XX (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).XX (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67)._____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67)._____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67)._____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).XX(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658)._____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706)._____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792)._____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition teshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627)._____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xvii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).(xv)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvi) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).(B) Alternate I (JAN 2017) of 52.224-3.(xvii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).(xviii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xix) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(/xx) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.(End of clause) 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within Ten (10) days of contract expiration.(End of clause) 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)(a) The Government may extend the term of this contract by written notice to the Contractor within 15 days of contract expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 66 months.(End of clause) 52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 2014)In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.THIS STATEMENT IS FOR INFORMATION ONLY: IT IS NOT A WAGE DETERMINATION Employee Class Monetary Wage-Fringe BenefitsWG-08 General Maintenance Worker $20.14(End of clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):http://www.arnet.gov/far http://farsite.hill.af.mil http://www.acq.osd.mil/dp/dars/dfars.html(End of clause) 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)(a) Definitions. As used in this clause-Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.Concatenated unique item identifier means--(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.Government's unit acquisition cost means--(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:------------------------------------------------------------------------Contract line, subline, or exhibitline item No. Item description------------------------------------------------------------------------...................................------------------------------------------------------------------------(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:------------------------------------------------------------------------Contract line, subline, or exhibitline item No. Item description------------------------------------------------------------------------...................................------------------------------------------------------------------------(If items are identified in the Schedule, insert ``See Schedule'' in this table.)(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparable and DoD serially managed nonreparables as specified in Attachment Number ----.(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following tee types of data qualifiers, as determined by the Contractor:(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.(5) Unique item identifier.(i) The Contractor shall--(A) Determine whether to--(1) Serialize within the enterprise identifier;(2) Serialize within the part, lot, or batch number; or(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.(ii) The issuing agency code--(A) Shall not be placed on the item; and(B) Shall be derived from the data qualifier for the enterprise identifier.(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:(1) Unique item identifier.(2) Unique item identifier type.(3) Issuing agency code (if concatenated unique item identifier is used).(4) Enterprise identifier (if concatenated unique item identifier is used).(5) Original part number (if there is serialization within the original part number).(6) Lot or batch number (if there is serialization within the lot or batch number).(7) Current part number (optional and only if not the same as the original part number).(8) Current part number effective date (optional and only if current part number is used).(9) Serial number (if concatenated unique item identifier is used).(10) Government's unit acquisition cost.(11) Unit of measure.(12) Type designation of the item as specified in the contract schedule, if any.(13) Whether the item is an item of Special Tooling or Special Test Equipment.(14) Whether the item is covered by a warranty.(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.(2) Unique item identifier of the embedded subassembly, component, or part.(3) Unique item identifier type.**(4) Issuing agency code (if concatenated unique item identifier is used).**(5) Enterprise identifier (if concatenated unique item identifier is used).**(6) Original part number (if there is serialization within the original part number).**(7) Lot or batch number (if there is serialization within the lot or batch number).**(8) Current part number (optional and only if not the same as the original part number).**(9) Current part number effective date (optional and only if current part number is used).**(10) Serial number (if concatenated unique item identifier is used).**(11) Description.** Once per item.(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.(2) Embedded items shall be reported by one of the following methods--(i) Use of the embedded items capability in WAWF;(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.(End of clause) 5152.233-40005152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE)Prior to submitting an agency protest, it is preferable that you first attempt to resolve yourconcerns with the responsible contracting officer. However, you may also file a protest tothe Headquarters (HQ), Army Materiel Command (AMC). The HQ AMCLevelProtest Program is intended to encourage interested parties to seek resolution of theirconcerns within AMC as an Alternative Dispute Resolution forum, rather thanfiling a protestwith the Government Accountability Office (GAO) or other external forum.Contract award or performance is suspended during the protest to the same extent,and within the same time periods, as if filed at the GAO. The AMC protest decisiongoal is to resolve protests within 35 calendar days from filing. To be timely, protestsmust be filed within the periods specified in FAR 33.103. If you want to file a protestunder the HQ AMC-Level Protest Program, the protest must request resolution underthat program and be sent to the address below.Headquarters U.S. Army Materiel CommandOffice of Command Counsel-Deputy Command Counsel4400 Martin RoadRm: A6SE040.001Redstone Arsenal, AL 35898-5000Fax: (256) 450-8840 or email usarmy.redstone.usa mc.mb x.protes ts@mail.milThe AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/comma ndco unse l.html.If internet access is not available, contact the contracting officer or HQ, AMC toobtain the HQ AMC-Level Protest Procedures.(End of Clause)Section J - List of Documents, Exhibits and Other AttachmentsPERFORMANCE WORK STATEMENTSection J -- List of Documents, Exhibits, and Other Attachments.Attachment 1 -- Performance Work StatementAttachment 2 -- Installation AccessSection K - Representations, Certifications and Other Statements of OfferorsCLAUSES INCORPORATED BY REFERENCE52.203-11 Certification And Disclosure Regarding Payments To Influence Certain Federal Transactions SEP 2007 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. OCT 2015 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.222-7007 Representation Regarding Combating Trafficking in Persons JAN 2015CLAUSES INCORPORATED BY FULL TEXT52.209-5 CERTIFICATION REGARDING RESPONSIBILITY MATTERS (OCT 2015)(a)(1) The Offeror certifies, to the best of its knowledge and belief, that-(i) The Offeror and/or any of its Principals-(A) Are ( ) are not ( ) presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;(B) Have ( ) have not ( ), within a tee-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (Federal, State, or local) contract or subcontract; violation of Federal or State antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property (if offeror checks "have", the offeror shall also see 52.209-7, if included in this solicitation); and(C) Are ( ) are not ( ) presently indicted for, or otherwise criminally or civilly charged by a governmental entity with, commission of any of the offenses enumerated in paragraph (a)(1)(i)(B) of this provision.; and(D) Have , have not , within a tee-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(1) Federal taxes are considered delinquent if both of the following criteria apply:(i) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.(ii) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.(2) Examples. (i) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(ii) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(iii) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(iv) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code).(ii) The Offeror has ( ) has not ( ), within a tee-year period preceding this offer, had one or more contracts terminated for default by any Federal agency.(2) Principal, for the purposes of this certification, means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).(b) The Offeror shall provide immediate written notice to the Contracting Officer if, at any time prior to contract award, the Offeror learns that its certification was erroneous when submitted or has become erroneous by reason of changed circumstances.(c) A certification that any of the items in paragraph (a) of this provision exists will not necessarily result in withholding of an award under this solicitation. However, the certification will be considered in connection with a determination of the Offeror's responsibility. Failure of the Offeror to furnish a certification or provide such additional information as requested by the Contracting Officer may render the Offeror nonresponsible.(d) Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render, in good faith, the certification required by paragraph (a) of this provision. The knowledge and information of an Offeror is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings.(e) The certification in paragraph (a) of this provision is a material representation of fact upon which reliance was placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous certification, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation for default.(End of provision) 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JULY 2013)(a) Definitions. As used in this provision--Administrative proceeding means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceedings at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables.Federal contracts and grants with total value greater than $10,000,000 means--(1) The total value of all current, active contracts and grants, including all priced options; and(2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules).Principal means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).(b) The offeror ( ) has ( ) does not have current active Federal contracts and grants with total value greater than $10,000,000.(c) If the offeror checked "has" in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions:(i) In a criminal proceeding, a conviction.(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.(iii) In an administrative proceeding, a finding of fault and liability that results in--(A) The payment of a monetary fine or penalty of $5,000 or more; or(B) The payment of a reimbursement, restitution, or damages in excess of $100,000.(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.(d) The offeror shall post the information in paragraphs (c)(1)(i) tough (c)(1)(iv) of this provision in FAPIIS as required tough maintaining an active registration in the System for Award Management database via https://www.acquisition.gov (see 52.204-7).(End of provision) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2017)The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) tough (u) of this provision.(a) Definitions. As used in this provision --"Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees."Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c)."Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies;(3) PSG 88, Live Animals;(4) PSG 89, Subsistence;(5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;(8) PSC 9610, Ores;(9) PSC 9620, Minerals, Natural and Synthetic; and(10) PSC 9630, Additive Metal Materials."Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;(3) Consist of providing goods or services to marginalized populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;(5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended."Sensitive technology"--(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3))."Service-disabled veteran-owned small business concern"--(1) Means a small business concern--(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16)."Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation."Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned--(1) Directly by a parent corporation; or(2) Tough another subsidiary of a parent corporation."Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often tough acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances."Veteran-owned small business concern" means a small business concern--(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and(2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women."Women-owned small business concern" means a small business concern--(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)", means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website.(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed tough https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ .[Offeror to identify the applicable paragraphs at (c) tough (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.](c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a small business concern.(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern.(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that--(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that--(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ -.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition teshold.(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:___(10) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that--(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(d) Certifications and representations required to implement provisions of Executive Order 11246--(1) Previous Contracts and Compliance. The offeror represents that--(i) It ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and(ii) It ( ___ ) has, ( ___ ) has not, filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that--(i) It ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or(ii) It ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American --Supplies, is included in this solicitation.)(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Supplies."(2) Foreign End Products:Line Item No. Country of Origin___ ______ ______ ___(List as necessary)(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(g)(1) Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms ``Baainian, Moroccan, Omani, Panamanian, or Peruvian end product,'' ``commercially available off-the-shelf (COTS) item,'' ``component,'' ``domestic end product,'' ``end product,'' ``foreign end product,'' ``Free Trade Agreement country,'' ``Free Trade Agreement country end product,'' ``Israeli end product,'' and ``United States'' are defined in the clause of this solicitation entitled ``Buy American--Free Trade Agreements--Israeli Trade Act.''(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American--Free Trade Agreements--Israeli Trade Act'':Free Trade Agreement Country End Products (Other than Baainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American -Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No._________[List as necessary](3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin___ ______ ______ ___[List as necessary](4) Buy American--Free Trade Agreements--Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American --Free Trade Agreements--Israeli Trade Act'':Free Trade Agreement Country End Products (Other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled ``Trade Agreements''.(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.Other End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition teshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--(1) [ ___ ] Are, [ ___ ] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [ ___ ] Have, [ ___ ] have not, within a tee-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and(3) [ ___ ] Are, [ ___ ] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and(4) [ ___ ] Have, [ ___ ] have not, within a tee-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(i) Taxes are considered delinquent if both of the following criteria apply:(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.(ii) Examples.(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).](1) Listed end products.Listed End Product Listed Countries of Origin___ ______ ______ ___(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.][ ___ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.[ ___ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or(2) ( ___ ) Outside the United States.(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly--(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or(2) ( ___ ) Outside the United States.(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.)[The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.][ ___ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ( ___ ) does ( ___ ) does not certify that-(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.[ ___ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror ( ___ ) does ( ___ ) does not certify that-(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.(3) If paragraph (k)(1) or (k)(2) of this clause applies-(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.(l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)(1) All offerors must submit the information required in paragraphs (l)(3) tough (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).(2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.(3) Taxpayer Identification Number (TIN).( ___ ) TIN: --------------------.( ___ ) TIN has been applied for.( ___ ) TIN is not required because:( ___ ) Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;( ___ ) Offeror is an agency or instrumentality of a foreign government;( ___ ) Offeror is an agency or instrumentality of the Federal Government.(4) Type of organization.( ___ ) Sole proprietorship;( ___ ) Partnership;( ___ ) Corporate entity (not tax-exempt);( ___ ) Corporate entity (tax-exempt);( ___ ) Government entity (Federal, State, or local);( ___ ) Foreign government;( ___ ) International organization per 26 CFR 1.6049-4;( ___ ) Other ----------.(5) Common parent.( ___ ) Offeror is not owned or controlled by a common parent;( ___ ) Name and TIN of common parent:Name - ___ .TIN - ___ .(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.(n) Prohibition on Contracting with Inverted Domestic Corporations-(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.(2) Representation. By submission of its offer, the offeror represents that--(i) It is not an inverted domestic corporation; and(ii) It is not a subsidiary of an inverted domestic corporation.(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.(1) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov.(2) Representation and Certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-(i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;(ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf).(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and(ii) The offeror has certified that all the offered products to be supplied are designated country end products.(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a unique entity identifier in the solicitation.(1) The Offeror represents that it [ ___ ] has or [ ___ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.(2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information:Immediate owner CAGE code: ___ Immediate owner legal name: ___ (Do not use a "doing business as" name)Is the immediate owner owned or controlled by another entity:[ ___ ] Yes or [ ___ ] No.(3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:Highest level owner CAGE code: ___ Highest level owner legal name: ___ (Do not use a "doing business as" name)(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless and agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(2) The Offeror represents that--(i) It is [ ___ ] is not [ ___ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (ii) It is [ ___ ] is not [ ___ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(r) Predecessor of Offeror. (Applies in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting.)(1) The Offeror represents that it [ ___ ] is or [ ___ ] is not a successor to a predecessor that held a Federal contract or grant within the last tee years.(2) If the Offeror has indicated ``is'' in paragraph (r)(1) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last tee years (if more than one predecessor, list in reverse conological order):Predecessor CAGE code: ___ (or mark ``Unknown'').Predecessor legal name: ___ .(Do not use a ``doing business as'' name).(t) Public Disclosure of Greenhouse Gas Emissions and Reduction Goals. Applies in all solicitations that require offerors to register in SAM (52.212-1(k)).(1) This representation shall be completed if the Offeror received $7.5 million or more in contract awards in the prior Federal fiscal year. The representation is optional if the Offeror received less than $7.5 million in Federal contract awards in the prior Federal fiscal year.(2) Representation. [Offeror to check applicable block(s) in paragraph (t)(2)(i) and (ii)]. (i) The Offeror (itself or tough its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose greenhouse gas emissions, i.e., makes available on a publicly accessible Web site the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard.(ii) The Offeror (itself or tough its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly accessible Web site a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage.(iii) A publicly accessible Web site includes the Offeror's own Web site or a recognized, third-party greenhouse gas emissions reporting program.(3) If the Offeror checked ``does'' in paragraphs (t)(2)(i) or (t)(2)(ii) of this provision, respectively, the Offeror shall provide the publicly accessible Web site(s) where greenhouse gas emissions and/or reduction goals are reported: ___ .(u)(1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(2) The prohibition in paragraph (u)(1) of this provision does not contravene requirements applicable to Standard Form 312 (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.(3) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).(End of provision) 252.209-7999 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-O0004) (JAN 2012)(a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012,(Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that-(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(b) The Offeror represents that-(1) It is [ ___ ] is not [ ___ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability,(2) It is [ ___ ] is not [ ___ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(End of provision)Section L - Instructions, Conditions and Notices to BiddersCLAUSES INCORPORATED BY REFERENCE52.204-7 System for Award Management OCT 2016 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 252.204-7004 Alt A System for Award Management Alternate A FEB 2014CLAUSES INCORPORATED BY FULL TEXT52.233-2 SERVICE OF PROTEST (SEP 2006)Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt fromATTN: Kimberly Marsh (Contracting Officer)4340 Magruder AvenueFort Jackson, SC 29207(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.(End of provision) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):http://www.arnet.gov/farhttp://farsite.hill.af.milhttp://www.acq.osd.mil/dp/dars/dfars.html(End of provision) 252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE (SEP 2011)(a) Line items are the basic structural elements in a solicitation or contract that provide for the organization of contract requirements to facilitate pricing, delivery, inspection, acceptance and payment. Line items are organized into contract line items, subline items, and exhibit line items. Separate line items should be established to account for separate pricing, identification (see section 211.274 of the Defense Federal Acquisition Regulation Supplement), deliveries, or funding. The Government recognizes that the line item structure in this solicitation may not conform to every offeror's practices. Failure to correct these issues can result in difficulties in accounting for deliveries and processing payments. Therefore, offerors are invited to propose an alternative line item structure for items on which bids, proposals, or quotes are requested in this solicitation to ensure that the resulting contract structure is economically and administratively advantageous to the Government and the Contractor.(b) If an alternative line item structure is proposed, the structure must be consistent with subpart 204.71 of the Defense Federal Acquisition Regulation Supplement and PGI 204.71. A sample solicitation line-item structure and a corresponding offer of a proposed alternative line-item structure follow.Solicitation:----------------------------------------------------------------------------------------------------------------Item No. Supplies/Service Quantity Unit Unit price Amount----------------------------------------------------------------------------------------------------------------0001............................ Computer, Desktop with 20 EA ............ ...........CPU, Monitor, Keyboardand Mouse.----------------------------------------------------------------------------------------------------------------Alternative line-item structure offer where monitors are shipped separately: ----------------------------------------------------------------------------------------------------------------Item No. Supplies/Service Quantity Unit Unit Price Amount----------------------------------------------------------------------------------------------------------------0001............................ Computer, Desktop with 20 EA ............ ...........CPU, Keyboard and Mouse.0002............................ Monitor................. 20 EA ............ ...........----------------------------------------------------------------------------------------------------------------(End of provision) ADDENDUM 52.212-1ADDENDUM TO FAR CLAUSE 52.212-1 - INSTRUCTIONS TO OFFERORS -COMMERCIAL ITEMS1. Submission of Offers. Offeror shall submit signed and dated offer at or before the exact time specified in this solicitation. Failure to provide all required documents or information may exclude the offeror from further consideration. An electronic copy will be accepted at the address identified below. Only a signed offer submitted on the SF 1449 will be accepted. An emailed proposal will only be accepted to the below addresses:cedric.r.belmont.civ@mail.milkimberly.c.marsh.civ@mail.mila. This is an electronic solicitation release. No hard copies will be mailed. Amendments to the solicitation will be posted.b. All inquiries during the solicitation phase should be directed to the Contract Specialist Mr. Cedric Belmont at cedric.r.belmont.civ@mail.mil and courtesy copy (cc:) the Procuring Contracting Officer (PCO) Ms. Kimberly C. Marsh at kimberly.c.marsh.civ@mail.mil . Offeror is requested to review the solicitation and submit only written questions and/or comments with email subject line reference: Ref: Solicitation Number W9124C-18-R-0008, Questions and/or Comments IMCOM Washer and Dryer Maintenance. All questions must be submitted no later than 48 hours after issuance of this Solicitation, to allow a reasonable time for the Government to respond. All questions submitted after that date and time may not be answered.2. General Instructions. These instructions are designed to provide general guidance for preparing proposals as well as providing specific instructions on proposal organization, format, and content. Offeror should include all documents and information requested and should be submitted in accordance with the instructions. The Offeror is cautioned to follow the instructions carefully, as the Government reserves the right to make an award based on initial proposals received without discussion. However, the government reserves the right to conduct clarifications if the Contracting Officer later determines them to be necessary.a. If an offeror believes that the requirements in these instructions contain an error, an ambiguity, omission, or are otherwise unsound, the offeror shall immediately notify the PCO in writing with supporting rationale.b. The proposal must be presented in a manner that clearly addresses the requirements, as set forth in the PWS. Proposals that are overly verbose or include marketing material may distract from the evaluators' ability to ascertain compliance with the solicitation.3. Proposal Preparation Instructions. Offeror's proposal will consist of tee (3) separate volumes: RFP Documents, Technical Proposal, and Price.Proposal Format. All pages of the offer must be appropriately numbered and identified with Solicitation Number: W9124C-18-R-0008 in the header and/or footer of each page. If RFP page limits are exceeded, the pages in excess of the limit will be removed and not evaluated.Page limitations are indicated in the chart below:Volume Title Format Number of Copies Maximum Page LimitVolume I RFP Documents-ExecutiveSummary-Exceptions/Assumptions-Signed SF 1449and ---Amendments-Contact MS Word 1 Electronic Copy NoneVolume II Technical Proposal MS Word 1 Electronic Copy 20 page countincludes: (8.5 x11inch paper; 12Arial Font orlarger, includesany fold-outsusedfor charts, tables(may not exceed8.5" x 11"; 12Arial font). 11 x 17 foldouts arepermissible up to10 pages and are excluded from page count. 8.5 x14 fold will countas a pageVolume III Price: Completed Schedule C and all Supportive Data MS Excel 1 Unlocked Electronic Copy NonePage Limit Does Not Include: Title Page, Table of Contents, Lists of tables and drawings and/or Cross Reference Matrix's, covers for Volumes, Tabs, Glossary of Terms/Abbreviations and Acronyms, Indices, section dividers and/or job qualifications. Cross-references should be utilized to preclude unnecessary duplication of data between sections.Electronic Copies.a. Sound or video (e.g. MPEG) files should not be embedded into the proposal files.Glossary of Abbreviations and Acronyms. Each volume will contain a glossary of all abbreviations and acronyms used, with an explanation for each. No pricing information is to be presented in any part of the proposal outside of the Volume II.Change Pages After Initial Proposal Submission. If the Government opens discussions and requests the offeror submit proposal revisions, during or after discussions, any changes from the original proposal will have changed information clearly marked by a vertical line in the right margin of the page identifying the changed content. The date of the revision and revision number will be reflected on each changed page (preferably on, or next to, the vertical change line). Make spreadsheet revisions obvious by highlighting cells that changed. Page limitations may also be placed on responses to Evaluation Notice (ENs). The Government will identify specified page limits for ENs responses in the letters forwarding the ENs to the offeror.4. Proposal Content.1. Volume I, RFP Documents:RFP Documents. The contractor shall submit the following documents in sequential order:a. SF 1449. The offeror must use the SF 1449 to submit an offer. The offeror must include all applicable information and must submit a signed and dated SF 1449.b. Acknowledgement of Solicitation Amendments. The offeror must submit a statement to acknowledge solicitation amendments, if applicable.c. Representations and Certifications. The offeror must complete and submit the required representations and certifications.d. Executive Summary: Provide an executive summary that introduces the contractor team and proposal submission, to include a list of team members and subcontractors and the task areas they are designated to provide support; identification of the proposal's point of contact (the personnel authorized to negotiate on behalf of their company), e-mail address, and phone number; a list of the proposal package contents.2. Volume II, Technical Proposal: The Technical Proposal shall consist of the offeror's response to meet the requirements outlined in the Performance Work Statement (PWS) as described below. Offeror should assume that the Government has no prior knowledge of their experience, and will base its evaluation on the information presented in the offeror's proposal.a. An organizational chart identifying the management structure of key personnel with a description of roles and responsibilities required to fulfill the tasks outlines in this requirement.c. A narrative fully describing the management control system that will be used to effectively accomplish the scope of work outlined in the PWS.3. Volume III, Price Proposal: The Pricing worksheet shall be submitted in Microsoft Excel and shall not be read only or password protected. All formulas, lookup tables, and links should be intact, and no links shall exist to files not included with the submission. Spreadsheets shall not contain hidden worksheets. PDF or flat files will not be considered adequate. The offeror must submit a proposed unit price and amount for each Contract Line Item Number (CLINs) listed in the solicitation. Offerors are not required to enter a price for the six-month period.As part of its proposal, the offeror will provide the total cost (if any) incurred to comply with the enterprise Contractor Manpower Reporting Application (eCMRA) requirement.a. If the reporting of Manpower Equivalents is not separately priced, insert "NSP" in the blank shown. The Price Proposal(s) shall be organized as follows and contain the identified information.(i) Exceptions/Assumptions. The contractor shall identify and explain any exceptions or deviations. Additionally, any assumptions used in the Proposal preparation must be identified.(ii) Schedule. The Pricing Schedule(s) shall be submitted fully completed. The Offeror shall indicate the price to be charged for each CLIN. Insert proposed unit price, and extended prices for the appropriate CLIN in the Pricing. The Offeror shall ensure the units prices are represented in two decimal positions only (example: tiny_mce_marker.27, not tiny_mce_marker.27458).(iii) In accordance with the proposed instructions in FAR 52.212-1, the offer shall complete all CLINS including the total amount for each period and the total amount for total contract price. The Contractor shall include spreadsheet showing a roll up of these calculations (is CLIN, Option years and Total Contract Price).(iv) Completed Direct Labor TableLaborCategory Area WageDetermination Code FLSAExemptNon-Exempt # of FTEs Total Labor Hr WageRate Fringe Benefits$ $ Section M - Evaluation Factors for AwardCLAUSES INCORPORATED BY REFERENCE52.217-5 Evaluation Of Options JUL 1990CLAUSES INCORPORATED BY FULL TEXT52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, based on lowest price technically acceptable, and other factors considered. The following factors shall be used to evaluate offers:(i) Technical Capability; (ii) Price; and (iii) Past Performance1. Adjectival Ratings1. The adjectival ratings to be utilized for proposal evaluations are consistent with the DoD Source SelectionProcedures and the Army Source Selection Supplement (AS3). A single rating system will be used to evaluate theTechnical Capability. Price will be evaluated for reasonableness, balance, and price realism if necessary, and will not receive an adjectival rating.Technical Acceptable/Unacceptable RatingsRating DescriptionAcceptable Proposal clearly meets the minimum requirements of the solicitation.Unacceptable Proposal does not clearly meet the minimum requirements of the solicitation .Evaluation Criteria1. Evaluation criteria consists of tee (3) factors. The proposal will be evaluated under the following evaluation factors:Factor 1: Technical CapabilityFactor 2: PriceFactor 3: Past PerformanceEvaluation Factors.(1) Factor 1 - Technical Capability. The Technical Capability Factor evaluation provides an assessment of the offeror‘s capability to satisfy the Government‘s minimum requirements. The Government will evaluate the contractor‘s technical proposal to ensure that it reflects a sound understanding of this requirement. The Contractor shall demonstrate that they have the necessary resources to support the magnitude of work identified in the PWS.(2) Factor 2 - Price. The Price Submission will not be scored or rated. The techniques and procedures describedunder FAR Part 13.106-3(a) will be the primary means of assessing price for commercial items to determine pricereasonableness. To be viable for award, an Offeror's price must be determined fair and reasonable. The Offeror'stotal proposed price will be utilized to evaluate if the proposal represents a fair and reasonable price. The totalevaluated price includes the price of the base period, and all option periods (to include the option to extend servicesin accordance with FAR 52.217-8).(3) Factor 3 - Past Performance. In lieu of requesting past performance information, Past Performance Information Retrieval System (PPIRS), Federal Awardee Performance and Integrity Information System (FAPIIS) and other commercial databases will be utilized in reviewing past performance.Past Performance Evaluation Ratings Rating DescriptionAcceptable Based on the offeror's performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror's performance record is unknown.Unacceptable Based on the offeror's performance record, the Government has no reasonable expectation that the offeror will be able to successfully perform the required effort.1) Unbalanced Pricing: Unbalanced pricing will be evaluated in accordance with FAR 15.404-1(g), asapplicable, to assess potential performance risk which could result in unreasonably high prices.(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.(End of provision)
W9124C18R0008 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Jackson
2/14/18, 2:27 PM