DB F-35A Hangar 40/42 Additions and AMU
Added: Oct 29, 2015 3:50 pm
This synopsis reflects teh same project as was posted in the sources sought notice at the following link: https://www.fbo.gov/spg/USA/COE/DACA05/W91238-16-S-2733/listing.htmlAction Code: Pre-Solicitation NoticeDate: October 29, 2015Class Code: Z2BZNAICS Code: 236220Subject: DB F-35A Hangar 40/42 Additions and AMUSolicitation Number: W91238-16-R-0007Set Aside Code: Competitive 8(a)Response Date: On or about 12-23-2015Place of Performance:Hill AFB, UTDESCRIPTION: This acquisition is proceeding as a competitive Request for Proposal (RFP) limited to 8(a) concerns.Project Description: The Sacramento District of the U.S. Army Corps of Engineers has an upcoming project for additions to F-35A Hangar 40/42 at Hill AFB, UT. These hangars are connected by an administrative office.The Hangar additions include reinforced concrete foundations, floor slabs, structural steel frame, backup power for new hangar doors, and fire detection/suppression system with storage tanks/pumps. Hangar alterations include asbestos/lead-based paint abatement, structural upgrade for seismic/wind/snow loads, HVAC upgrades, roof modifications, fire detection/suppression system upgrades, bridge crane for each hangar, fall protection, bird netting, one power panel for each of the three aircraft that will occupy each hangar, and new lightning protection systems. AMU is reinforced concrete floor, steel structural frame, standing seam metal roof, utilities, fire detection/suppression, pavements, site improvements, communication support, and all necessary features (interior and exterior) to yield a safe, complete, and useable facility. Project includes perimeter pavements around and up to hangars and parking.The Contractor shall develop and complete the designs and construct the facilities. The Contractor will be given a "buildable area" boundary, to best locate/layout the proposed facility.The Design-Build Contractor may be required to perform any necessary geotechnical investigation yielding a geotechnical report that shall be used as a basis for design. Likewise, the D-B Military Contractor may be required to perform a topographical survey; also a basis for design.All questions should be directed to the Contract Specialist, Daniel Czech, e-mail: Daniel.E.Czech@usace.army.mil or phone: (916) 557-7012.The RFP is anticipated to be posted on or about November 23, 2015.Please note: this acquisition is being set-aside for as a competitive 8(a) procurement, pending SBA approval. Should the SBA not approve, it will be 100% for small business concerns.The site visit/pre-proposal conference date, time and location will be identified in the solicitation. OFFERORS ARE ADVISED THAT THIS PROJECT MAY BE DELAYED, CANCELLED OR REVISED AT ANY TIME DURING THE SOLICITATION, SELECTION, EVALUATION, NEGOTIATION AND/OR FINAL AWARD PROCESS.Ordering Solicitation: Plans and specifications will NOT be provided in hard paper copy or CD format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the Request for Proposal (RFP) is issued. To register, click on the Register Now button in the Vendors Block and follow the instructions. For further information, please click on the FedBizOpps homepage link and the Vendor User Guide.The only PLAN-HOLDER'S/BIDDER'S LIST now available is via FedBizOpps. When viewing the Synopsis/Pre-solicitation Notice, you will click on the ‘ADD ME TO INTERESTED VENDORS' to enter your information. This function does not, however, allow you to identify yourself as a Prime or Sub. It is recommended that you identify your category in parentheses at either the beginning or end of your company name. For example: XYZ Construction (Prime/Sub). IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO CHECK FEDBIZOPPS FREQUENTLY FOR ANY AMENDMENTS OR CHANGES TO THE SOLICITATION.
W91238-16-R-0007 Department of the Army Corps of Engineers Engineering District Sacramento
10/29/15, 3:50 PM