Definitive Contract SPRWA123C0006

Award Date 9/30/23
Potential Completion Date 11/30/24
Potential Value $3M
Funding Federal Agency
Air Force Sustainment Center
Contracting Federal Agency
Aviation
Set-Aside Type
No Set-Aside Used
Federal Contract Vehicle
Extent Competed
Not Competed
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Alpharetta, GA 30004, USA
Solicitation Procedures
Only One Source
Number Of Offers Received
1
Legislative Mandate
Walsh Healy Act
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
<p>The Department of the Air Force Materiel Command Air Force Sustainment Center awarded a $496,160 firm fixed price delivery order contract to L3 Aviation Products Inc., a division of L3Harris Technologies, Inc., for the repair of flat panel up front control applicable to the F-15E aircraft. The work will be performed in Alpharetta, Georgia over a one year period from April 1, 2023 through March 31, 2024.</p>
<p>The Department of the Air Force Materiel Command Air Force Sustainment Center awarded L3 Aviation Products Inc., a division of L3Harris Technologies, Inc., a $470,160 firm fixed price delivery order contract to provide repair of flat panel up front control applicable to the F-15E aircraft. The work will be performed in Alpharetta, Georgia over a period of four years ending March 31, 2026.</p>
The Department of the Air Force Materiel Command Air Force Sustainment Center awarded L3 Aviation Products Inc., a subsidiary of L3Harris Technologies, Inc., a $449,083 firm fixed price delivery order to repair flat panel up front controls applicable to the F-15E aircraft. Work will be performed in Alpharetta, Georgia through March 2026. No set-aside designation was applied to this solicitation to repair critical avionics components for the Air Force's F-15E Strike Eagle fleet, helping to ensure...
This is a firm fixed-price delivery order contract awarded by the Air Force Sustainment Center, a defense agency, to L3 Aviation Products Inc., a division of L3Harris Technologies. The contract is for the repair of flat panel up-front control components applicable to the F-15E Strike Eagle aircraft. The contract has a total ceiling value of $631,085.00 and a period of performance through March 31, 2026. No small business set-aside was utilized for this award. L3 Aviation Products specializes...
This firm-fixed-price delivery order was awarded to L3 Aviation Products Inc., a subsidiary of L3Harris Technologies, Inc., by the Air Force Sustainment Center. The $513,520.00 contract is for the repair of flat panel up front controls applicable to the F-15E aircraft over a period ending March 31, 2025. L3 Aviation Products is a manufacturer of avionics systems and components, supporting various military aircraft platforms including the F-15, F-16, C-130, AH-64, and UH-60. This delivery order...
This federal contract award with the Air Force Sustainment Center is for the repair of F-15 flight memory units. The $59,444 firm-fixed-price delivery order was awarded to L3Harris Aviation Products, Inc., a subsidiary of L3Harris Technologies, Inc. The contract has an ultimate completion date of April 27, 2025. As a major defense contractor, L3Harris Aviation Products provides a wide range of specialized aviation components, repair services, and technical solutions to support military aircraft,...
The Department of the Air Force Materiel Command Air Force Sustainment Center awarded L3 Aviation Products Inc. a $2,111,094 firm fixed price delivery order for repair of flat panel up front controls applicable to the F-15E aircraft. L3 Aviation will perform the repairs in Alpharetta, Georgia under an existing indefinite delivery contract vehicle with no set aside designation. As a division of L3Harris Technologies, L3 Aviation is an experienced original equipment manufacturer and provider of...
This is a firm fixed-price delivery order contract awarded by the Air Force Sustainment Center to L3Harris Aviation Products, Inc. for the repair of F-15 flight memory units. The contract has a ceiling value of $13,804.00 and will run through May 31, 2025. The award is not set aside for any specific business type. L3Harris Aviation Products, Inc. is a subsidiary of the larger defense contractor L3Harris Technologies, Inc. Both companies have extensive histories of securing prime and...
This federal contract awarded by the Department of the Air Force Materiel Command Air Force Sustainment Center is for the repair of flat panel up front controls (FPUFC) on aircraft. The prime contractor is The Boeing Company, a major aerospace manufacturer, which has received multiple similar awards from the Air Force Sustainment Center for flat panel display repairs on various Air Force aircraft platforms. The contract has a firm fixed price of $1,230,460.20 and a period of performance ending...
This is a firm fixed-price delivery order issued by the Air Force Sustainment Center, a defense agency, to L3Harris Aviation Products, Inc. (doing business as L-3 Communications Avionics Systems Inc.), a subsidiary of the parent company L3Harris Technologies, Inc. The $67,936.00 contract is for the repair of F-15 flight memory units, with a completion date of July 31, 2025. The award date was November 8, 2024, and there was no set-aside used. As a prime contractor, L3Harris Aviation Products...

This contract award from the Air Force Sustainment Center (AFSC) is for the production of flat panel up front control (FPUFC) units, NSN 5895-01-530-1899FX, P/N 429600-100, with a quantity of 54 and a ceiling value of $2,998,419.72. The contract was awarded to L3 Aviation Products Inc., a subsidiary of L3Harris Technologies, Inc., as a definitive firm-fixed price contract with no set-aside designation.

This award is part of the FPUFC requirement for the F-15E program, where the government does not possess the required technical data to enable competition. As the original equipment manufacturer, L3Harris is the sole known source with the necessary knowledge and capabilities to produce the FPUFC units and ensure compatibility with the aircraft systems. The contract has an ultimate completion date of November 30, 2024. Additional subcontractors supporting this effort include manufacturers of printed circuit boards, housings, connectors, and other electronic components.

Generated 1/28/25, 12:22 PM