Coupler, Directional
Added: Mar 28, 2017 3:10 pm NSN: 5985-01-154-9162 PR No.: 0065636320 Item: Coupler, Directional Other Than Full and Open Competition applies in accordance with FAR 6.302-1 Manufacturer's Code and Part Number: (06351) P/N 585R817G02, (66544) P/N 1065238 or 585R817G05, and (H0203) P/N 585R817G03 Drawing Number: In-Accordance-With Drawing No. (97942) 585R817 and all associated drawings Quantity: 71 Various Increments Solicited: 31To4041To5051To6061To7071 Unit of Issue: SE F.O.B: Origin Inspection/Acceptance: Origin Destination Information: SW3210 Subject solicitation requires Government First Article Testing (FAT). Delivery Schedule required is as follows: Time to Provide FAT: 90 Days after date of award Time for Gov't. Evaluation of FAT: 60 Days after receipt of FAT Time for Production Quantity: 71 SE in 410 Days after FAT approval and the balance, if applicable, at the rate of 20 SE every 30 days thereafter. Note: If FAT is "waived", delivery of production quantity will be as follows: 71 SE in 260 days ADO and the balance, if applicable, will be at the rate of 20 SE every 30 days thereafter until completion of the award. Joint Certification Program (JCP) Certification requirement applies. The solicitation document contains information that has been designated as "Militarily Critical Technical Data" and have been "classified". Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid security clearance may have a copy of the solicitation document and drawings. DD Form 254 applies. A classified document is included in the technical data package that supports this material. Contract award for this item is limited to those contractors that have a valid and current security classification level of "confidential" prior to award. This solicitation is being issued under the First Destination Transportation (FDT) program. If this acquisition is for Foreign Military Sales (FMS) or has an APO/FPO ship-to-address, FDT will not apply and normal procedures should be followed. For FDT program transportation requirements, see DLAD clauses 52.247-9059 F.o.b. Origin, Government Arranged Transportation and 52.247-9058, First Destination Transportation (FDT) program - Shipments Originating Outside the contiguous United States (OCONUS). Addition information about FDT can be found on the FDT website (http://www.dla.mil/FDTPI/). All responsible sources may submit an offer/proposal which shall be considered. The following Government-wide Numbered Note(s) applies: *A portion of the acquisition is set aside for small business concerns.; *The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.; * Information submitted should be pertinent and specific in the technical area under consideration, on each of the following qualifications: (1) Experience: An outline of previous projects, specific work previously performed or being performed and any in-house research and development effort; (2) Personnel: Name, professional qualifications and specific experience of scientist, engineers and technical personnel who may be assigned as a principal investigator and/or project officer; (3) Facilities: Availability and description of special facilities required to perform in the technical areas under consideration. A statement regarding industry security clearance. Any other specific and pertinent information as pertains to this particular area of procurement that would enhance our consideration and evaluation of the information submitted. ; * Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. ; The solicitation will be available at https://www.dibbs.bsm.dla.mil/RFP on its issue date of (on or about) ___04/13/2017___. The Small Business size standard is 1,250 employees. Drawings/specifications will be available tough DIBBS. Proposed procurement contains a 100 % option for increased quantities. This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are: Microwave Engineering Corp. (06351), Continental Microwave and Tool 66544), and Thales Nederland B.V. (H0203)) This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. SPE7M5-17-R-0027 Defense Logistics Agency Land and Maritime
3/28/17, 3:10 PM Spare parts for military weapons systems and related equipment
Added: Nov 03, 2016 3:42 pm This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. THE DLA LAND AND MARITIME IS ISSUING THIS SOURCES SOUGHT SYNOPSIS AS A MEANS OF CONDUCTING MARKET RESEARCH TO IDENTIFY PARTIES HAVING AN INTEREST IN AND THE RESOURCES TO SUPPORT THE FOLLOWING REQUIREMENTS: ITEM: Coupler, Directional NSN 5985-01-154-9162 is to be procured in-accordance-with CAGE 97942 control drawing 585R817 Revision "L" and all associated drawings. Due to the criticality of the item, procurement is restricted to sources specified on the "Source Controlled" drawing. Microwave Engineering Corp. (06351), Continental Microwave And Tool (66544), and Nortop Grumman Systems (97942) are currently the only known approved sources for this item. Once the solicitation is issued, DLAD 52.217-9023 - Restriction of Alternate Offers for Source Controlled Items will apply. NOTE: The cited drawing is a "source controlled" drawing and as of the date of this notice only the source(s) cited on the drawing have been approved. Even though sources and approved part numbers are provided, the items furnished must meet the requirements of the cited drawing. Any potential offerors who are interested in qualifying their products for purpose of future acquisitions must contact the cognizant design activity specified on the source controlled drawing. There may be additional approved sources that have not been reflected on the drawing at this time. These sources must provide documentation from the contact the cognizant design activity specified on the source controlled drawing, indicating that your company is now an "approved" source.The Purpose of this synopsis is to locate sources interested in becoming approved sources and for any additional approved sources.Government First Article Testing will be required for all sources not waived. Data available is a source control drawing which is considered inadequate for manufacture but is determined adequate for qualification of a new source with the required information in the source qualification statement. Joint Certification Program (JCP) Certification requirement applies. The solicitation document contains information that has been designated as "Militarily Critical Technical Data" and have been "classified". Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid security clearance may have a copy of the solicitation document and drawings. DD Form 254 applies. A classified document is included in the technical data package that supports this material. Contract award for this item is limited to those contractors that have a valid and current security classification level of "secret" prior to award. This is a "Critical Application Item".A quantity of 140 sets up to 200 sets may be required and will be shipped to a DLA stocking location. This item is supplied in a matched set of 4. Item shall have a shelf life of 120 months. The purpose of this synopsis is to locate sources interested in becoming approved sources and for any additional approved sources. Submission Instructions: Responses to this Request for Information (RFI) must be sent to Kenneth Planty via email at kenneth.planty@dla.mil by the response date listed in this synopsis and should include in their submission, information on their products/services, company, CAGE code, capability, company size/profile, and any other supportive information. Respondents will be placed on the solicitation mailing list. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. SPE7M5-17-R-0027 Defense Logistics Agency Land and Maritime
11/3/16, 3:42 PM