Cooperative Agreement 80NSSC21M0248

Toray Advanced Composites USA, Inc. was awarded a $1.2M cooperative agreement by NASA to participate in Phase 1 of the High Rate Composites Aircraft Manufacturing (HICAM) project. This single-source award, announced on June 1, 2022, with an ultimate completion date of April 30, 2026, supports work approved by NASA and the Advanced Composites Consortium. The contract involves no set-aside designation and is performed at the company's facility in Morgan Hill, California. HICAM is a collaborative...

Lockheed Martin Aeronautics Company, a division of Lockheed Martin Corporation, was awarded a cooperative agreement valued at $61,035 by NASA on June 27, 2023, to participate in Phase 1 of the NASA High-Rate Composites Aircraft Manufacturing (HICAM) Project. The work will be performed in Fort Worth, Texas, and is scheduled for completion by April 30, 2026. This non-set-aside award represents a collaborative research initiative focused on advancing aerospace manufacturing technologies through...

The Air Force Research Laboratory awarded a $6.7M cost-plus-fixed-fee definitive contract to Advanced Thermoplastic Composites LLC (ATC Manufacturing) on September 30, 2025, for thermoplastic composites development supporting large, high-rate aircraft structures. The contract, which runs through June 30, 2028, will be performed at ATC Manufacturing's facility in Post Falls, Idaho. This award builds on ATC Manufacturing's established expertise in continuous fiber thermoplastic composite...

The National Aeronautics and Space Administration (NASA) awarded a $347,363.58 Cooperative Agreement to The Boeing Company for the HI-RATE COMPOSITE AIRCRAFT MANUFACTURING (HICAM) project. The goal of HICAM is to demonstrate manufacturing approaches and associated technologies for large composite airframe structures that enable a 4-6x production rate increase without cost. The contract is not set aside and is being performed in St. Louis, MO. Boeing has extensive experience providing...

This contract award is for the HI-RATE COMPOSITE AIRCRAFT MANUFACTURING (HICAM) project, with the primary goal of demonstrating manufacturing approaches and associated technologies for large composite airframe structures that enable a 4-6x production rate increase without cost. The $100,965.00 cooperative agreement was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to the University of South Carolina, a public educational institution located in...

This federal contract award, with ID 80NSSC21M0254, was issued by the Shared Services Center, a civilian agency, to the prime contractor Spirit Aerosystems Inc. The $95,460 cooperative agreement is for the High-Rate Composite Aircraft Manufacturing (HICAM) project, which aims to demonstrate manufacturing approaches and associated technologies for large composite airframe structures. The contract has no set-aside designation and is scheduled for completion by June 16, 2023. Spirit Aerosystems...

Lockheed Martin Corporation, under its Aerospace Systems Air Platform Technology Research indefinite-delivery/indefinite-quantity contract vehicle with the Department of the Air Force, was awarded a $2.56 million delivery order to develop fail-safe technologies for bonded unitized composited structures. The prime contractor will perform work in White Settlement, Texas from February 2020 through November 2023. Subcontractors include Albany International Corporation for 3D woven infused pi-preform...

This is a single-source, $1,377,597 cooperative agreement awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Cytec Engineered Materials Inc. to participate in Phase 1 of the NASA High-Rate Composites Aircraft Manufacturing (HICAM) project. The agreement is not associated with a larger contract vehicle and does not have a set-aside designation. As the prime contractor, Cytec will conduct research and development work approved by NASA and the Advanced...

<p>The Air Force Research Laboratory awarded an $8.39 million definitive contract to GKN Aerospace Gtc, LLC for scalable thermoplastic injection molding (SCALE TI) of critical airframe structures on October 22, 2025.</p> <p>Place of performance is Westlake, TX. The contract ceiling is $8.39 million under firm fixed-price terms, with ultimate completion targeted for October 25, 2028.</p>

The Air Force Research Laboratory awarded a $4.44 million cost-no-fee definitive contract to Michigan Technological University on May 28, 2024, to develop computationally-driven next-generation carbon-carbon composite materials. This three-year effort, scheduled for completion by May 28, 2027, is being performed in Houghton, Michigan, and represents a non-set-aside procurement reflecting open competition. The research initiative integrates computational modeling with experimental validation to...