BPA Call GS06F96326-GSNWM2AC4W

This Blanket Purchase Agreement (BPA) call awarded under the GSA's RC2 master contract is for a six-piece screwdriver bit set and handle. The set includes double-ended bits in 3/16 inch and #1 Phillips and flat tip sizes, 1/4 inch and #2 Phillips sizes, #1 and #2 square drive sizes, and T10 and T15 Torx driver sizes. The handle measures 7-3/8 inches in length and is of an unspecified type. Premier & Companies, Inc. is the prime contractor providing the screwdriver sets for $432.90 under a...

This is a fixed-price delivery order issued by the U.S. government to Amco Products, Inc. for the provision of a specific type of torque-set screwdriver bit under a larger federal contract vehicle. The order has a ceiling value of $2,780.00 and a completion date of September 22, 2005. Prior to government acceptance, the contractor must provide written certification that the items were manufactured by an authorized licensee of the Phillips Screw Company. The contract does not have a set-aside...

This contract award is for the supply of screwdriver bits that conform to the TORX insert bit design, suitable for use with TORX recess screws. The bits have a hexagonal male shank on one end and a TORX screwdriver point on the other end. The contract was awarded to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan, which specializes in providing a wide range of tools and hardware to the U.S. federal government. The contract has a ceiling value of...

This is a firm-fixed price contract awarded by the General Services Administration's (GSA) Federal Acquisition Service to Giga, Inc., a for-profit organization, to provide a jeweler's screwdriver set in accordance with the detailed item description. The contract, valued at $1,425.00, is a call order under the RC2 Blanket Purchase Agreement (BPA) program, which allows for the direct delivery of various tools and hardware to government agencies. The screwdriver set consists of six flat-tip sizes...

The General Services Administration Federal Acquisition Service awarded a $25,660 firm fixed price delivery order to Idsc Holdings LLC Snap-On Industrial, operating as a division of Snap-On Incorporated, to supply female square drive screwdriver bits. The bits will measure 1/4 inch in internal diameter, 1 inch in overall length, and 1/2 inch in overall width, constructed of steel with a chrome coating. Performance will take place at the contractor's facility in Kenosha, Wisconsin under a...

The General Services Administration awarded Wright Tool Company, LLC a $164,170 fixed price with economic price adjustment contract to provide insert screwdriver bits under the agency's RC2 Blanket Purchase Agreement vehicle. The bits will meet Torx insert bit design specifications for use with Torx recess screws, featuring a hexagonal male shank on one end and Torx screwdriver point on the other. Wright Tool will manufacture and deliver the bits from its facility in Warren, Michigan by July 29,...

The General Services Administration awarded a $160 firm fixed price delivery order to Snap-On Industrial, a division of Idsc Holdings LLC, for a screwdriver bit set and handle. The set includes a T-handle with ratcheting and magnetic bit retention that holds two interchangeable steel bits. The overall length is 3-15/16 inches with a 2-inch shank length and red plastic handle. Performance will occur in Kenosha, Wisconsin under Snap-On Industrial's Multiple Award Schedule contract vehicle. No...

This is a delivery order contract awarded by a U.S. government agency to Amco Products, Inc. for the delivery of screwdriver torq-set insert bits. The contract has a ceiling value of $2,860.00 and is a fixed price with economic price adjustment. The contract does not have a set-aside designation. The place of performance is Ohio, USA. Prior to government acceptance, the contractor must provide written certification that the items were manufactured by an authorized licensee of the Phillips...

This Blanket Purchase Agreement (BPA) under the General Services Administration's (GSA) Federal Acquisition Service RC2 vehicle was awarded to Wright Tool Company, LLC for a screwdriver bit set and handle. The set includes four components with an overall length of 7-3/4 inches and features a ball detent hex shank 2-1/4 inches in length made of steel with a chrome coating. One bit is a 1/4 x 5/16 inch reversible flat tip. The $6,240 fixed price contract with economic price adjustment has a period...

The General Services Administration awarded Wright Tool Company, LLC a $12,400 fixed price with economic price adjustment contract to deliver screwdriver bits under the RC2 Blanket Purchase Agreement. The contract calls for hexagonal shank, square drive screwdriver bits measuring 1/4 inch at the tip and 9/64 inch overall in length, constructed of steel for manual tool use. Funding comes from the GSA Federal Acquisition Service to supply bits conforming to Commercial Item Description A-A-3153A....