C-hobs FA8213-18-r-3015

The proposal Response date has been extended to 27 February 2018 @ 1500 MT.
Updated Comment Resultion Matrix (CRM) C-HOBS has been added to answer submitted questions.
Some attachment updates that are referenced in the CRM will be completed in Amendment 3.
For any questions not answered in this Amendment, please resubmit them to kyle.andersen@us.af.mil.

Added: Jan 25, 2018 5:54 pm The proposal Response date has been extended to 27 February 2018 @ 1500 MT.

Updated Comment Resultion Matrix (CRM) C-HOBS has been added to answer submitted questions.

Some attachment updates that are referenced in the CRM will be completed in Amendment 3.

For any questions not answered in this Amendment, please resubmit them to kyle.andersen@us.af.mil

The proposal Response date has been extended to 20 February 2018 @ 1500 MT.
Attachment Comment Resultion Matrix (CRM) C-HOBS has been added to answer submitted questions.
Also the Pricing Matrix, Incremental Spares, Section L, Section M, SOO, Exhibit N, Exhibit A and TEP attachments have been updated to incorporate information from questions.
For any questions not answered in this Amendment, please resubmit them..

Added: Jan 18, 2018 5:18 pm The proposal Response date has been extended to 20 February 2018 @ 1500 MT.

Attachment Comment Resultion Matrix (CRM) C-HOBS has been added to answer submitted questions.

Also the Pricing Matrix, Incremental Spares, Section L, Section M, SOO, Exhibit N, Exhibit A and TEP attachments have been updated to incorporate information from questions.

For any questions not answered in this Amendment, please resubmit them. 

Attached is the C-HOBS FA8213-18-R-3015 Solicitation. Responses are due to the issuing office no later than 12 Feb 2018 by 5:00 PM MST. Attachment 5 "ICD" and Attachment 6 "SRD" will only be released to those that provide a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC's identified on this FBO posting. The primary POC for this solicitation is Mr. Kyle Andersen. Contact information is at the bottom of this posting.

.

Added: Dec 19, 2017 7:02 pm

Attached is the C-HOBS FA8213-18-R-3015 Solicitation.  Responses are due to the issuing office no later than 12 Feb 2018 by 5:00 PM MST.  Attachment 5 "ICD" and Attachment 6 "SRD" will only be released to those that provide a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC's identified on this FBO posting. The primary POC for this solicitation is Mr. Kyle Andersen.  Contact information is at the bottom of this posting.

Additional Q & A's are available upon request. Interested parties must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC(s) identified on this FBO posting in order to be eligible to receive the data..

Added: Dec 18, 2017 1:05 pm Additional Q&A's are available upon request.  Interested parties must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC(s) identified on this FBO posting in order to be eligible to receive the data.

Available for release is select data from Precision Selectable Height-of-Burst Sensor (P-HOBS) Contract No. FA8656-14-C-0171. Interested parties must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC(s) identified on this FBO posting in order to be eligible to receive the data.

Section 2.2.6 Subfactor 3: Management Approach para (a) Rights in Technical Data, Computer Software, and Computer Software Documentation of Section M has been revised to include the following language "The Government's intention is for the contractor to deliver complete level 3 drawings sufficient to manufacture and sustain C-HOBS product through full and open competition in the future. Offerors are not precluded from competing for award based on their refusal to provide at least Government Purpose License Rights to all data (other than the data listed as Unlimited in Table 1 of Attachment 2) and software delivered under the contract. However, an award decision will be based in part on how well the proposal meets the Government's software and data right's needs. In accordance with Table 5 "TECHNICAL RATINGS - TRADE OFF - Applicable to Data Only," an Offeror will receive a Marginal Rating under Subfactor 3(a) if it's "proposal includes Unlimited Rights to just the data items as identified in Attachment 2 and proposes in accordance with Section L, M and Attachment 2..."

The statement, "Offerors are not precluded from competing for award based on their refusal to provide at least Government Purpose License Rights to all data (other than the data listed as Unlimited in Table 1 of Attachment 2) and software delivered under the contract" simply asserts that any interested party can still submit a proposal that will be evaluated. However, Offerors' proposals that do not meet the Government's intent for obtaining level 3 drawings sufficient to manufacture and sustain C-HOBS product through full and open competition in the future will negatively affect its technical rating for Subfactor 3.

.

Added: Dec 15, 2017 5:19 pm   

Available for release is select data from Precision Selectable Height-of-Burst Sensor (P-HOBS) Contract No. FA8656-14-C-0171.  Interested parties must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC(s) identified on this FBO posting in order to be eligible to receive the data.

Section 2.2.6 Subfactor 3: Management Approach para (a) Rights in Technical Data, Computer Software, and Computer Software Documentation of Section M has been revised to include the following language "The Government's intention is for the contractor to deliver complete level 3 drawings sufficient to manufacture and sustain C-HOBS product through full and open competition in the future.  Offerors are not precluded from competing for award based on their refusal to provide at least Government Purpose License Rights to all data (other than the data listed as Unlimited in Table 1 of Attachment 2) and software delivered under the contract.  However, an award decision will be based in part on how well the proposal meets the Government's software and data right's needs.  In accordance with Table 5 "TECHNICAL RATINGS - TRADE OFF - Applicable to Data Only," an Offeror will receive a Marginal Rating under Subfactor 3(a) if  it's "proposal includes Unlimited Rights to just the data items as identified in Attachment 2 and proposes in accordance with Section L, M and Attachment 2..."

The statement, "Offerors are not precluded from competing for award based on their refusal to provide at least Government Purpose License Rights to all data (other than the data listed as Unlimited in Table 1 of Attachment 2) and software delivered under the contract" simply asserts that any interested party can still submit a proposal that will be evaluated.  However, Offerors' proposals that do not meet the Government's intent for obtaining level 3 drawings sufficient to manufacture and sustain C-HOBS product through full and open competition in the future will negatively affect its technical rating for Subfactor 3. 

The Official Synopsis that was posted on 24 July 2017 has been revised. The revised synopsis is saved as "Edited Synopsis for Cockpit-Selectable Height-of-Burst (C-HOBS) Sensor" which is included in this posting. Revisions were made to units of issue, destination information, solicitation number, anticipated CLIN structure, anticipated solicitation release date and anticipated award date..

Added: Dec 05, 2017 5:10 pm The Official Synopsis that was posted on 24 July 2017 has been revised.  The revised synopsis is saved as "Edited Synopsis for Cockpit-Selectable Height-of-Burst (C-HOBS) Sensor" which is included in this posting. Revisions were made to units of issue, destination information, solicitation number, anticipated CLIN structure, anticipated solicitation release date and anticipated award date.

Additional Q & A's are available for those who have an approved DD Form 2345..

Added: Nov 08, 2017 4:03 pm Additional Q&A's are available for those who have an approved DD Form 2345.

Final SRD is available to those who have an approved DD Form 2345. Attached to this notice is the solicitation DD254. As previously mentioned in an earlier posting to this FBO announcement, the Government intends to make available the annex to the TDP which is classified at the SECRET LEVEL. If interested in receiving the annex please provide company name, cage code and justification for your "need to know."

.

Added: Sep 20, 2017 5:02 pm  

Final SRD is available to those who have an approved DD Form 2345.  Attached to this notice is the solicitation DD254.  As previously mentioned in an earlier posting to this FBO announcement, the Government intends to make available the annex to the TDP which is classified at the SECRET LEVEL.  If interested in receiving the annex please provide company name, cage code and justification for your "need to know."

Additional Q & A's, unincorporated DSU-33 Notices of Revisions (NORs), and updated drawings as a result of incorporated DSU-33 NORs are available for those who have an approved DD Form 2345.

.

Added: Sep 19, 2017 12:55 pm  

Additional Q&A's, unincorporated DSU-33 Notices of Revisions (NORs), and updated drawings as a result of incorporated DSU-33 NORs are available for those who have an approved DD Form 2345.

Anticipated solicitation release date is now 28 September 2017. This date is an estimate. The Government reserves the right to release the solicitation prior to or later than 28 September 2017.

.

Added: Aug 16, 2017 3:12 pm

Anticipated solicitation release date is now 28 September 2017.  This date is an estimate.  The Government reserves the right to release the solicitation prior to or later than 28 September 2017.

Cushion Drawings 9331021, 9331022 and 9331023 are available upon request and submittal of an approved DD Form 2345..

Added: Aug 03, 2017 1:51 pm Cushion Drawings 9331021, 9331022 and 9331023 are available upon request and submittal of an approved DD Form 2345.

Industry Day 2 Q & As, Industry Day 2 slides, and the Desiccant Drawing for part number 9331010 is available upon request and submittal of an approved DD Form 2345. The M548 container drawing that is used for the DSU 33D/B is attached with this posting.

.

Added: Aug 02, 2017 12:26 pm Industry Day 2 Q&As, Industry Day 2 slides, and the Desiccant Drawing for part number 9331010 is available upon request and submittal of an approved DD Form 2345.  The M548 container drawing that is used for the DSU 33D/B is attached with this posting. 

24 July 2017

Official Synopsis for Cockpit-Selectable Height-of-Burst (C-HOBS) Sensor:

Subject: C-HOBS

Action Code: Synopsis

Description: The Joint Direct Attack Munition's (JDAM's) current fuze sensor, DSU-33D/B, has been in production since 1995; significant obsolescence issues prevent continued procurement of this sensor. C-HOBS is a modification program established to resolve current obsolescence issues with the DSU-33D/B sensor and to improve sensor performance. C-HOBS will maintain the same form, fit and function as the DSU-33D/B; however, due to the nature of the changes required to address the obsolescence issues, certain targets of opportunity to future-proof the sensor will be addressed. The changes include both manual and cockpit-selectable height-of-burst with improved system performance for JDAM and the Next Generation Area Attack Weapons (NGAAW) missions, which are pivotal to battlespace success. The C-HOBS requirement will be awarded via full and open competition.

National Stock Number: To be determined.

Qualification Requirement per FAR Subpart 9.2: Pre-qualification not required to propose as qualification will occur during contract performance.

Manufacturer, size, dimensions, other form, fit or functional description, predominant material of manufacture: DSU-33 Technical Data Package, C-HOBS System Requirements Document, and draft Interface Control Document (ICD) has been provided to industry upon request, and is still available upon request through the POC referenced below. The JDAM Joint Operational Requirements Document, Anti-Tamper Security Classification Guide, Final ICD and Technical Order/Technical Manual Work Package will be made available shortly. Please send requests for these documents immediately so the Government can distribute the documents as soon as they become available. A approved DD Form 2345 will be required to receive the above mentioned documents for those who have not yet submitted one to the below POC.

Anticipated Quantity: Maximum of 60,000 C-HOBS units.

Units of issue: Design and Qualification (each) C-HOBS (each), Data and Reports Not Separately Priced (lots), Data and Reports - priced, (each), First Article Acceptance Test (each), Trainers (each), Cable Kits (each), Spares (each) and Life Cycle Surveillance and Test Set, (each).

Destination information: Inspection and acceptance will be at destination for Data and Reports CLINs. Inspection and acceptance will be at origin for all other CLINs.

Delivery Schedule: It is anticipated that Design and Qualification will be completed within 24 months of contract award, and C-HOBS deliveries will have an 18 month PoP which is inclusive of a 6 month long lead time and 12 months for production.

Solicitation Number: The official solicitation number for this requirement will be FA8213-17-R-3046; however the announcement will be listed under the existing FA8213-17-R-DSU33 number as previously used on www.fbo.gov to avoid two separate listings for the same C-HOBS requirement.

NAICS Code: 332993

Classification Code: 13 - Ammunition & explosives.

Pricing Arrangement/Contract Type: The predominant pricing arrangement will be Firm Fixed Price (FFP). Additional pricing arrangements that will be utilized are Cost Plus Fixed Fee (CPFF) and Cost Reimbursable (CR).

Anticipated CLIN Structure:

CLIN

DESCRIPTION

CONTRACT TYPE

1000

Design and Qualification

CPFF

2000

Data and Reports - Not Separately Priced

N/A

2001

Data and Reports - Priced

FFP

3000

First Article Acceptance Test

FFP

3001

C-HOBS

FFP

3002

Trainers D1

FFP

3003

Trainers D2

FFP

3004

Trainers D5

FFP

3005

Cable Kits

FFP

3006

Spares

FFP

4000

C-HOBS

FFP

4001

Trainers D1

FFP

4002

Trainers D2

FFP

4003

Trainers D5

FFP

4004

Cable Kits

FFP

4005

Spares

FFP

5000

C-HOBS

FFP

5001

Trainers D1

FFP

5002

Trainers D2

FFP

5003

Trainers D5

FFP

5004

Cable Kits

FFP

5005

Spares

FFP

6000

C-HOBS

FFP

6001

Trainers D1

FFP

6002

Trainers D2

FFP

6003

Trainers D5

FFP

6004

Cable Kits

FFP

6005

Spares

FFP

7000

C-HOBS

FFP

7001

Trainers D1

FFP

7002

Trainers D2

FFP

7003

Trainers D5

FFP

7004

Cable Kits

FFP

7005

Spares

FFP

7006

Life Cycle Surveillance Test Set

FFP

8000

Travel

CR - No Fee

Period of Performance (PoP): Anticipate an eight-year PoP with a seven-year ordering period.

Proposal Submittal: Offerors will be given at least 45 days to submit a proposal starting from the solicitation release date.

Anticipated Solicitation Release Date: 8 August 2017 (date is subject to change). The Government reserves the right to release the solicitation later than this date.

Anticipated Award Date: 23 May 2018 (date is subject to change).

Set-Aside: N/A - Full and Open competition.

Place of Performance: Contractor's facility.

Foreign Participation: Prospective offerors are advised that foreign participation is not permitted.

Responsible Offerors: All responsible sources may submit a proposal, which shall be considered by the agency.

Export Controlled Data: This acquisition may/does involve technology that has a military or space application. The only US contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose. US contractors shall submit a copy of their current, approved DD Form 2345 with their request for solicitation. The form, including instructions for completing the form is available at http://www.dtic.mil/whs/directives/forms/eforms/dd2345.pdf. The solicitation/data package will be mailed to the data custodian identified in block 3 of the DD Form 2345. Foreign participation is not authorized.

Solicitation, Notices & Amendments: The solicitation and all subsequent notices and amendments will be posted on the internet at www.fbo.gov. The Government will not reimburse any interested parties for monies spent to provide a response to the subsequent solicitation notice.

Synopsis Respondent's: Respondents to the solicitation shall specify whether it is a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also, respondents shall specify whether they are a U.S. or foreign-owned firm.

Inquiries: Any questions in regards to this notice must be submitted in writing (preferably by email) to the Contracting Office according to the contact information provided below:

Contracting Office Address:

Contracting Officer: Darin Huler (darin.huler@us.af.mil)

6072 Fir Ave

Bldg 1233

Hill AFB, UT 84056-5820

.

Added: Jul 24, 2017 4:33 pm

24 July 2017

Official Synopsis for Cockpit-Selectable Height-of-Burst (C-HOBS) Sensor:

Subject:  C-HOBS

Action Code: Synopsis

Description:  The Joint Direct Attack Munition's (JDAM's) current fuze sensor, DSU-33D/B, has been in production since 1995; significant obsolescence issues prevent continued procurement of this sensor.  C-HOBS is a modification program established to resolve current obsolescence issues with the DSU-33D/B sensor and to improve sensor performance.  C-HOBS will maintain the same form, fit and function as the DSU-33D/B; however, due to the nature of the changes required to address the obsolescence issues, certain targets of opportunity to future-proof the sensor will be addressed.  The changes include both manual and cockpit-selectable height-of-burst with improved system performance for JDAM and the Next Generation Area Attack Weapons (NGAAW) missions, which are pivotal to battlespace success. The C-HOBS requirement will be awarded via full and open competition.

National Stock Number:  To be determined.

Qualification Requirement per FAR Subpart 9.2:  Pre-qualification not required to propose as qualification will occur during contract performance.

Manufacturer, size, dimensions, other form, fit or functional description, predominant material of manufacture:  DSU-33 Technical Data Package, C-HOBS System Requirements Document, and draft Interface Control Document (ICD) has been provided to industry upon request, and is still available upon request through the POC referenced below.  The JDAM Joint Operational Requirements Document, Anti-Tamper Security Classification Guide, Final ICD and Technical Order/Technical Manual Work Package will be made available shortly.  Please send requests for these documents immediately so the Government can distribute the documents as soon as they become available.  A approved DD Form 2345 will be required to receive the above mentioned documents for those who have not yet submitted one to the below POC.

Anticipated Quantity: Maximum of 60,000 C-HOBS units.

Units of issue: Design and Qualification (each) C-HOBS (each), Data and Reports Not Separately Priced (lots), Data and Reports - priced, (each), First Article Acceptance Test (each), Trainers (each), Cable Kits (each), Spares (each) and Life Cycle Surveillance and Test Set, (each).

Destination information: Inspection and acceptance will be at destination for Data and Reports CLINs.  Inspection and acceptance will be at origin for all other CLINs.

Delivery Schedule:  It is anticipated that Design and Qualification will be completed within 24 months of contract award, and C-HOBS deliveries will have an 18 month PoP which is inclusive of a 6 month long lead time and 12 months for production.

Solicitation Number:  The official solicitation number for this requirement will be FA8213-17-R-3046; however the announcement will be listed under the existing FA8213-17-R-DSU33 number as previously used on www.fbo.gov to avoid two separate listings for the same C-HOBS requirement.

NAICS Code:  332993

Classification Code:  13 - Ammunition & explosives.

Pricing Arrangement/Contract Type:  The predominant pricing arrangement will be Firm Fixed Price (FFP).   Additional pricing arrangements that will be utilized are Cost Plus Fixed Fee (CPFF) and Cost Reimbursable (CR). 

Anticipated CLIN Structure: 

Period of Performance (PoP):  Anticipate an eight-year PoP with a seven-year ordering period.

Proposal Submittal:  Offerors will be given at least 45 days to submit a proposal starting from the solicitation release date.

Anticipated Solicitation Release Date:   8 August 2017 (date is subject to change).  The Government reserves the right to release the solicitation later than this date.

Anticipated Award Date:  23 May 2018 (date is subject to change).

Set-Aside:  N/A - Full and Open competition.

Place of Performance:  Contractor's facility.

Foreign Participation:  Prospective offerors are advised that foreign participation is not permitted.

Responsible Offerors:  All responsible sources may submit a proposal, which shall be considered by the agency.

Export Controlled Data:  This acquisition may/does involve technology that has a military or space application.  The only US contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose.  US contractors shall submit a copy of their current, approved DD Form 2345 with their request for solicitation.  The form, including instructions for completing the form is available at http://www.dtic.mil/whs/directives/forms/eforms/dd2345.pdf.  The solicitation/data package will be mailed to the data custodian identified in block 3 of the DD Form 2345.  Foreign participation is not authorized.

Solicitation, Notices & Amendments:  The solicitation and all subsequent notices and amendments will be posted on the internet at www.fbo.gov.  The Government will not reimburse any interested parties for monies spent to provide a response to the subsequent solicitation notice. 

Synopsis Respondent's:  Respondents to the solicitation shall specify whether it is a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business.  Also, respondents shall specify whether they are a U.S. or foreign-owned firm.

Inquiries:  Any questions in regards to this notice must be submitted in writing (preferably by email) to the Contracting Office according to the contact information provided below:

Contracting Office Address:

Contracting Officer:  Darin Huler (darin.huler@us.af.mil)

6072 Fir Ave

Bldg 1233

Hill AFB, UT 84056-5820

Update:

1) The solicitation date showing as 22 Aug 2017 on the Model Contract FA821317R3046 is not accurate. The schedule to go over RFP release and Proposal due dates will be presented at Industry Day.

2) The attached Industry day 2 announcement should read 27-28 June "2017" instead of "2016."

.

Added: Jun 07, 2017 11:59 am  

Update:

1) The solicitation date showing as 22 Aug 2017 on the Model Contract FA821317R3046 is not accurate.  The schedule to go over RFP release and Proposal due dates will be presented at Industry Day.

2) The attached Industry day 2 announcement should read 27-28 June "2017" instead of "2016."

The Government has determined that C-HOBS will be competed 100% full and open.

Industry Day # 2 has been scheduled at a facility near Eglin AFB FL on the 27th - 28th of June 2017. Please reference the Industry Day 2 Announcement and Agenda attachments for additional information. Directions, registrations, and an Industry Day Question Request form are attached.

The Draft RFP has also been attached which will be the main topic of the Industry Day. Please come prepared to discuss the Draft RFP, with any comments, recommendations and questions. All documents associated with the Draft RFP are not finalized and will be changing based on further Government review and feedback from industry. Industry is highly encouraged to provide feedback, comments, and questions in writing to Darin Huler utilizing the Industry Day Question Request attachment.

A draft of the C-HOBS Interface Control Document (ICD) is available along with an updated System Requirements Document (SRD). Interested vendors must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to Darin Huler in order to be eligible to receive the ICD and SRD.

The Government team is working on getting the solicitation DD254 finalized in order to be able to provide, upon request and U.S. security classification verification, classified portions of the Technical Data Package (TDP).

Deadlines:

1) Industry Day Registrations (See Industry Day Registration Attachment) due no later than (NLT) 15 June 2017.

2) Classified discussions are not planned. If an interested party desires to present or discuss classified information, please inform Darin Huler via email NLT 15 June 2017. Based on completion of the DD254 the Government might not be able to accommodate such requests.

3) Industry Day Question Request due NLT 22 June 2017.

.

Added: Jun 02, 2017 12:29 pm The Government has determined that C-HOBS will be competed 100% full and open.

Industry Day # 2 has been scheduled at a facility near Eglin AFB FL on the 27th - 28th of June 2017.  Please reference the Industry Day 2 Announcement and Agenda attachments for additional information.  Directions, registrations, and an Industry Day Question Request form are attached.

The Draft RFP has also been attached which will be the main topic of the Industry Day.  Please come prepared to discuss the Draft RFP, with any comments, recommendations and questions. All documents associated with the Draft RFP are not finalized and will be changing based on further Government review and feedback from industry.  Industry is highly encouraged to provide feedback, comments, and questions in writing to Darin Huler utilizing the Industry Day Question Request attachment.

A draft of the C-HOBS Interface Control Document (ICD) is available along with an updated System Requirements Document (SRD).  Interested vendors must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to Darin Huler in order to be eligible to receive the ICD and SRD.

The Government team is working on getting the solicitation DD254 finalized in order to be able to provide, upon request and U.S. security classification verification, classified portions of the Technical Data Package (TDP). 

Deadlines:

1) Industry Day Registrations (See Industry Day Registration Attachment) due no later than (NLT) 15 June 2017.

2) Classified discussions are not planned.  If an interested party desires to present or discuss classified information, please inform Darin Huler via email NLT 15 June 2017.  Based on completion of the DD254 the Government might not be able to accommodate such requests.

3) Industry Day Question Request due NLT 22 June 2017.

The Government plans on making the classified portions of the DSU-33 Technical Data Package (TDP) available in preperation for an upcoming Industry Day (date to be announced within the next couple of weeks) and issuance of the draft RFP. Attendees who are interested in receiving access to the classified portions of the TDP must have a valid U.S. security clearance of SECRET or higher. The annex to the TDP is classified at the SECRET LEVEL which will only be released to interested parties with a need to know possessing the appropriate clearance. All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (NISPOM) (DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R).
In order to verify your U.S. security clearance, please enter a visit request to JPAS SMO Code HP1MFTKFT and put Mr. Kyle Chapman as the POC. Once you have submitted your visit request, please notify Darin Huler via email at darin.huler@us.af.mil and include in your email a justification statement of a need to know.
Please input and provide the requested information ASAP but no later than 31 May 2017..

Added: May 22, 2017 1:46 pm Modified: May 22, 2017 2:24 pmTrack Changes The Government plans on making the classified portions of the DSU-33 Technical Data Package (TDP) available in preperation for an upcoming Industry Day (date to be announced within the next couple of weeks) and issuance of the draft RFP.  Attendees who are interested in receiving access to the classified portions of the TDP must have a valid U.S. security clearance of SECRET or higher.  The annex to the TDP is classified at the SECRET LEVEL which will only be released to interested parties with a need to know possessing the appropriate clearance.  All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (NISPOM) (DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R). 

In order to verify your U.S. security clearance, please enter a visit request to JPAS SMO Code HP1MFTKFT and put Mr. Kyle Chapman as the POC. Once you have submitted your visit request, please notify Darin Huler via email at darin.huler@us.af.mil and include in your email a justification statement of a need to know. 

Please input and provide the requested information ASAP but no later than 31 May 2017.

The Government plans on making the classified portions of the DSU-33 Technical Data Package (TDP) available in preperation for an upcoming Industry Day (date to be announced within the next couple of weeks) and issuance of the draft RFP. Attendees who are interested in receiving access to the classified portions of the TDP must have a valid U.S. security clearance of SECRET or higher. The annex to the TDP is classified at the SECRET LEVEL which will only be released to interested parties with a need to know possessing the appropriate clearance. All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (NISPOM) (DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R). Please provide the following:

Company Name:

Cage Code:

Security POC:

Individual(s) and associated JPAS # who will receive the classified docs:

Justification statement of need to know:
Please provide this information ASAP but no later than 31 May 2017 to Darin Huler at darin.huler@us.af.mil

.

Added: May 22, 2017 1:46 pm The Government plans on making the classified portions of the DSU-33 Technical Data Package (TDP) available in preperation for an upcoming Industry Day (date to be announced within the next couple of weeks) and issuance of the draft RFP.  Attendees who are interested in receiving access to the classified portions of the TDP must have a valid U.S. security clearance of SECRET or higher.  The annex to the TDP is classified at the SECRET LEVEL which will only be released to interested parties with a need to know possessing the appropriate clearance.  All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (NISPOM) (DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R).  Please provide the following:

Company Name:

Cage Code:

Security POC:

Individual(s) and associated JPAS # who will receive the classified docs:

Justification statement of need to know:

Please provide this information ASAP but no later than 31 May 2017 to Darin Huler at darin.huler@us.af.mil

Interested parties are invited to respond to the attached Sources Sought Synopsis.

Deadline: No Later Than 5:00 PM MDT, 24 October 2016. The USG retains the right to NOT consider late responses.

.

Added: Sep 22, 2016 5:21 pm

Interested parties are invited to respond to the attached Sources Sought Synopsis.

Deadline:  No Later Than 5:00 PM MDT, 24 October 2016.  The USG retains the right to NOT consider late responses.

The DSU-33 Industry Day slides that were presented on 17 August 2016 at Hill AFB are available upon request. Interested vendors must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement" to the POC(s) identified on this FBO posting in order to be eligible to receive the slides.

.

Added: Sep 21, 2016 3:38 pm

The DSU-33 Industry Day slides that were presented on 17 August 2016 at Hill AFB are available upon request.  Interested vendors must provide a copy of a signed DD Form 2345 "Military Critical Technical Data Agreement"  to the POC(s) identified on this FBO posting in order to be eligible to receive the slides.

Attached are the Question and Answers and sign-in sheet from the Industry Day held on 17 Aug..

Added: Sep 01, 2016 4:01 pm Attached are the Question and Answers and sign-in sheet from the Industry Day held on 17 Aug.

Further explanation on the twenty (20) printed single sided pages for the RFI response. Title pages and the table of contents do not count against the twenty (20) page limit.
A Government Support Contractor from HX5 that has an NDA with the Government will be attending the General and one-on-one sessions of Industry Day.

.

Added: Aug 08, 2016 10:49 am

Further explanation on the twenty (20) printed single sided pages for the RFI response.  Title pages and the table of contents do not count against the twenty (20) page limit.

A Government Support Contractor from HX5 that has an NDA with the Government will be attending the General and one-on-one sessions of Industry Day.

Added Industry Day Question Request Form. Please submit this completed form with your questions no later than 8 August 2016 5:00 MDT..

Added: Aug 03, 2016 11:09 am Added Industry Day Question Request Form. Please submit this completed form with your questions no later than 8 August 2016 5:00 MDT.

Location of the Industry Day has been confirmed and will be held at Hill AFB UT at the Base Chapel. Maps have been attached to this announcement. Address is as follows:
5711 E Avenue, Hill AFB, UT 84056.
Once you enter the South gate (heading north down Hillfield road which will take you directly to the South Gate) take the very first left which is just a few yards from the security gate. You will pass the Warrior Fitness Center and the Chapel will be on your right hand side. The Chapel is two buildings with an annex. Enter into the Chapel lobby (the southside building) and head downstairs to the basement.

.

Added: Jul 21, 2016 3:59 pm

Location of the Industry Day has been confirmed and will be held at Hill AFB UT at the Base Chapel.  Maps have been attached to this announcement.  Address is as follows:

5711 E Avenue, Hill AFB, UT 84056. 

Once you enter the South gate (heading north down Hillfield road which will take you directly to the South Gate) take the very first left which is just a few yards from the security gate.  You will pass the Warrior Fitness Center and the Chapel will be on your right hand side.  The Chapel is two buildings with an annex.  Enter into the Chapel lobby (the southside building) and head downstairs to the basement.

Please respond to both the attached RFI request and Industry Day announcement for DSU-33.
Deadlines:
-Industry Day Registration (see industry day Registration attachment) due 8 August 2016
-RFI Response (See RFI attachment) due 8 August 2016.

Added: Jul 07, 2016 2:56 pm Please respond to both the attached RFI request and Industry Day announcement for DSU-33.

Deadlines:

-Industry Day Registration (see industry day Registration attachment) due 8 August 2016
-RFI Response (See RFI attachment) due 8 August 2016