Am_0010_Dwgs_FTD.pdf
PDF 347 KB Posted
- Attached to
- B-21 MPF/FTD Construction Federal contract opportunity
- Solicitation number
- W9128F21R0032
About this file
This document package includes construction drawings and diagrams for a federal solicitation seeking a contractor to build a B-21 Mission Operations Planning Facility and Field Training Detachment Facility at Ellsworth Air Force Base in South Dakota.
The drawings depict architectural, structural, mechanical and telecommunications plans for the two facilities. The Mission Operations Planning Facility will provide approximately 47,113 square feet of secure operations planning space to support the B-21 bomber. The Field Training Detachment Facility will offer around 57,328 square feet of secure maintenance training and classroom space for B-21 operations at Ellsworth AFB and across the Air Force. Both projects include spaces constructed to Intelligence Community Directive/Standard 705 security standards. The solicitation also contains options for fixtures, furnishings, equipment, intrusion detection systems, access control systems, uninterrupted power supply and closed-circuit television as part of the project scope.
View the file
Other files for this federal contract opportunity
Show all 31
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
12"
4"
BEAM CLAMP
CABLE TRAY ASSEMBLY
MOUNTING ASSEMBLY IN SECTION
NUTS & WASHERS
CABLE TRAY
SUPPORTS
1/2" THREADED
HANGER ROD
PIPE CLAMP
LISTED COPPER GROUNDING
STRAP AT EVERY TRAY JUNCTION
BOND #6 Cu FROM CABLE
TRAY TO CONDUIT (TYP)
NOTE:
DETAIL INDICATES LADDER TYPE TRAY. REFER TO PLANS FOR CABLE
TRAY TYPE.
NOTES:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
TRAY DESIGNED FOR HANGING WITH 1/2" DIAMETER THREADED
ROD. MAXIMUM SPAN IS 10'-0".
AT SUPPORT POINTS, THREADED ROD MUST BE HUNG FROM
CONCRETE INSERTS, CLAMPS OR DEVICES THAT ARE SECURELY
FASTENED TO THE INTERMEDIATE GRID OR STRUCTURE
SUFFICIENTLY TO CARRY THE LOAD OF THE TRAY AND ITS
CONTENTS WITH A SAFETY FACTOR OF 3.
INSTALL CABLES UNIFORMLY ACROSS DUAL-RAIL.
CONTRACTOR IS TO USE EXTRA HANGERS WHENEVER IN DOUBT
OR FOR ANY UNUSUAL SITUATION WHEN HANGER ROD IS
MOUNTED AT OTHER THAN A SPLICE CONNECTOR POINT ALONG
TRAY, DRILL A 5/8" HOLE VERTICALLY THROUGH THE SPLINE AND
INSERT HANGER ROD WITH NUTS AND WASHERS. DO NOT DRILL
HOLES IN SPINE UNLESS A HANGER ROD IS USED.
WHEN CONNECTING TRAY SECTIONS AT OTHER THAN HANGING
POINTS, USE SPLICE CONNECTORS WITH NO VERTICAL HOLES.
CABLE TRAY SHALL BE INSTALLED WITH ACCESS FROM EITHER
SIDE TO ALLOW CABLE TO BE LAID DIRECTLY INTO THE SIDES OF
THE TRAY IN LIEU OF PULLING.
PULL HEAVY CABLES IN CENTER OF TRAY.
DURING AND AFTER INSTALLATION OF CABLE TRAY, CARE MUST
BE TAKEN BY ALL TRADES NOT TO HANG FROM THE TRAY RUNGS
OR WALK ON THE TRAY.
ALL NUTS, BOLTS AND WASHERS ARE TO BE SUPPLIED WITH ALL
FITTINGS.
IF A SECOND CONTRACOR INSTALLS THE CABLES, THIS
CONTRACTOR MUST FIRST VERIFY THAT THE CABLE TRAY HAS
BEEN SECURELY AND PROPERLY INSTALLED BY THE FIRST
CONTRACTOR PRIOR TO INSTALLING ANY CABLES.
WHEN PULLING CABLE INTO TRAY, SUFFICIENT ROLLERS AND
SHEAVES MUST BE USED SO THAT NEITHER THE TRAY NOR THE
CABLES ARE DAMAGED.
RECESSED MOUNTED FIBER
TERMINATION ENCLOSURE
LEGRAND CAT. NO. EHWB4
WITH EHWBC4-WH COVER
12 EA. MULTIMODE DUPLEX LC
TYPE ADAPTERS
12 EA. MULTIMODE DUPLEX LC
TYPE ADAPTERS
1 1/4" CONDUIT WITH
COMPRESSION CONNECTOR
FROM RAISED FLOOR AREA OR
FROM WALKERDUCT
UNDER FLOOR
1 1/4" CONDUIT WITH
COMPRESSION CONNECTOR
FROM CABLE TRAY
1 1/4" EMT CONDUIT WITH CABLING
AS SHOWN IN RISER DIAGRAM.
ROUTE CONDUIT TO CABLE TRAY
ABOVE ACCESSIBLE CEILING,
PROVIDE INSULATED BUSHING ON
END OF CONDUIT.
4 11/16" SQUARE OUTLET BOX AND
COMMON FACE PLATE WITH FIBER
ADAPTERS AS SHOWN ON PLAN
DRAWINGS. PROVIDE 12" OF CABLE
SLACK AT CABLE TRAY
DUPLEX LC
ADAPTERS
G
LABEL
BL
OUTLET CONFIGURATION 1
G BL
LABEL
LABEL
OUTLET CONFIGURATION 2
LABEL
G
LABEL
BL
OUTLET CONFIGURATION 3
LABEL
O
LABEL
BL
OUTLET CONFIGURATION 4
LABEL
R
LABEL
BL
OUTLET CONFIGURATION 5
LABEL
LABEL
OUTLET CONFIGURATION 6
G
MTG. STUDS
FOR WALL
MTD.
TELEPHONE
O R
O R
LABEL
OUTLET CONFIGURATION 7
LABEL
O O
O O
R
LABEL
R
OUTLET CONFIGURATION 8
LABEL
R BL
G GREEN
CONNECTOR
R
RED
CONNECTOR
O
ORANGE
CONNECTOR
BL
BLANK
(SPARE)
O O
O R
NOTES:
1. NIPR (GREEN), SIPR (RED), & SAP (ORANGE)
OUTLET CONNECTORS SHALL EACH BE
KEYED DIFFERENTLY FROM EACH OTHER
WHICH ARE NOT IN LOCKING PROTECTIVE
ENCLOSURES WITH COVER/DOOR. IN LIEU OF
KEYED CONNECTORS PROVIDE WITH PASS
THRU COVER/DOOR WITH LOCKING MEANS.
2. FOR OUTLETS & PATCH PANELS PROVIDE
CONNECTORS WITH LOCKING MECHANISM
BUILT INTO THE BODY OF THE CONNECTOR
WHICH CANNOT BE RELEASED WITHOUT A
MATCHING COLOR EXTRACTION TOOL.
3. FOR OUTLETS & PATCH PANELS PROVIDE
SECURE PORT BLOCKERS WHICH LOCK AND
PROTECT UNUSED PORTS FROM THE
UNAUTHORIZED INSERTION OF A CABLE
ASSEMBLY OR CONNECTOR.
G
LABEL
G
OUTLET CONFIGURATION 9
G G
LABEL
US Army Corps of Engineers ®
SHEET ID
U S
A R
M Y
C O
R P
S O
F E
N G
IN
E
E R
S
D R
A W
N B
Y
D E
S
IG
N E
D B
Y
S U
B M
IT
T
E D
B Y
S
IZ
E
C H
E C
K E
D B
Y
A N
S I D
IS
S
U E
D A
T E
C O
N T
R A
C T
N O
S O
L
IC
IT
A
T
IO
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D A
T E
File Path:
Plot Date:
M A
R K
D E
S C
R
IP
T
IO
N
BIM 360://Ellsworth B21/8996-12-Ellsworth AFB B21 FTD_E19.rvt
4/21/2022 10:43:42 AM
T-501
FTD
T E
L E
C O
M M
U N
IC
A
T
IO
N S
D E
T A
IL
S
B -2
F
IE
L D
T R
A
IN
IN
G
D E
T A
C H
M E
N T
F
T D
O M
A H
A D
IS
T
R
IC
T C
A P
IT
O
L A
V E
N U
E S
U
IT
E
O M
A H
A N
E B
R A
S K
A
J O
A K
E S
S W
IL
L
IA
M S
D E
L L E
D G
E
T L
/R A
N O
V E
M B
E R
W F
R
ADVERTISEMENT - 100% DESIGN
E L L S
W O
R T
H A
IR
F
O R
C E
B A
S E
S
O U
T H
D A
K O
T A
P R
O J E
C T
N U
M B
E R
F
X B
M
N.T.S.D5
TYPICAL TELECOM CONDUIT TO CABLE TRAY DETAIL
N.T.S.A1
RECESSED MOUNTED TELECOM TERMINATION BOX
N.T.S.E1
TYPICAL VOICE AND DATA RECEPTACLE INSTALLATION DETAIL
A
M -0
D E
S
IG
N I
S S
U E
D F
O R
P R
IC
IN
G
/2
A M
-0
G
E N
E R
A L R
E V
IS
IO
N S
/2
2" C (TYP)
PROVIDE 4" x 4" WIREWAY
120V, 20A
CKT. TR5-35
COMM ROOM 153
TO 208V
RECEPTACLE
MOUNTED ON CABLE
TRAY
17 17
16 16
2" C (TYP)
PROVIDE 4" x 4" WIREWAY
120V, 20A
CKT. TR4A-17
120V, 20A
CKT. TR4A-19
COMM ROOM 146
17 17
16 16
2" C (TYP)
PROVIDE 4" x 4" WIREWAY
120V, 20A
CKT. TR3-37
120V, 20A
CKT. TR3-39
COMM ROOM 118
6 5 4 3 2 1 6 5 4 3 2 1
6 5 4 3 2 1 6 5 4 3 2 1
1TO COMM. RM. 210
TO COMM. RM. 210
6 5 4 3 2 1 6 5 4 3 2 1
TO COMM. RM. 210
REFER TO TY602
TO COMM. RM. 246
REFER TO TY602
208V, 30A CKT.
TR3A-10,12
208V, 30A CKT.
TR4A-21,23
US Army Corps of Engineers ®
SHEET ID
U S
A R
M Y
C O
R P
S O
F E
N G
IN
E
E R
S
D R
A W
N B
Y
D E
S
IG
N E
D B
Y
S U
B M
IT
T
E D
B Y
S
IZ
E
C H
E C
K E
D B
Y
A N
S I D
IS
S
U E
D A
T E
C O
N T
R A
C T
N O
S O
L
IC
IT
A
T
IO
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D A
T E
File Path:
Plot Date:
M A
R K
D E
S C
R
IP
T
IO
N
BIM 360://Ellsworth B21/8996-12-Ellsworth AFB B21 FTD_E19.rvt
4/21/2022 10:43:43 AM
TY601
FTD
S E
C U
R
IT
Y R
IS
E
R D
IA
G
R A
M
F
IR
S T
F L
O O
R
B -2
F
IE
L D
T R
A
IN
IN
G
D E
T A
C H
M E
N T
F
T D
O M
A H
A D
IS
T
R
IC
T C
A P
IT
O
L A
V E
N U
E S
U
IT
E
O M
A H
A N
E B
R A
S K
A
J O
A K
E S
S W
IL
L
IA
M S
D E
L L E
D G
E
T L
/R A
N O
V E
M B
E R
W F
R
ADVERTISEMENT - 100% DESIGN
E L L S
W O
R T
H A
IR
F
O R
C E
B A
S E
S
O U
T H
D A
K O
T A
P R
O J E
C T
N U
M B
E R
F
X B
M
GENERAL SHEET NOTES
SHEET KEYNOTES
1. PROVIDE GROUNDING OF ALL EQUIPMENT RACKS,
CONDUIT AND WIREWAYS TO SBB IN COMM. ROOM.
2. REFER TO PLANS FOR LOCATON OF EQUIPMENT.
3. THE CONTRACTOR SHALL PROVIDE RACEWAYS AND
BACK BOXES FOR THE SECURITY SYSTEM AS A BASE
BID. THE SECURITY EQUIPMENT, INCLUDING RACK
AND WIRING SHALL BE INCLUDED AS A BID OPTION.
4. ALL WORK RELATING TO THE BID OPTION:
PROCUREMENT, INSTALLATION, AND
COMMISSIONING OF THE IDS SYSTEM ITSELF MUST
BE DONE BY US CITIZENS.
1. PROVIDE MULTI MODE, TWO STRAND, OM4 TYPE
FIBER OPTIC CABLE FROM SECURITY SYSTEM EQUIP.
RACK IN 3/4"C TO SECURITY SYSTEM EQUIP. RACK IN
COMM. RM. INDICATED.
2. PROVIDE RACK MTD. CLIENT WORKSTATION CPU.
3. PROVIDE 1U, 24 PORT, CAT-6, TYPE T568B WIRING,
RACK MTD. PATCH PANEL.
4. PROVIDE NETWORK SWITCH W/ UPLINK MODULE.
5. PROVIDE EXTENDER CHASSIS DRAWER W/ DC
POWER SUPPLY AND POWER DISTRIBUTION PANEL.
6. PROVIDE 24 PORT FIBER PATCH PANEL WITH 24 "LC"
CONNECTORS.
7. PROVIDE V5 INPUT MODULE.
8. PROVIDE 3000 VA UPS, 208 VAC IN, 110 VAC OUT.
9. PROVIDE BATTERY PACK FOR SMART UPS, 48 VDC.
10. PROVIDE FLOOR MTD. 72"H x 30"D x 24"W EQUIPMENT
RACK WITH LOCKABLE ENCLOSURE, BACKPLANE,
POWER STRIP, AND TAMPER SWITCH.
11. PROVIDE WALL MTD., 12RU, ENCLOSED, LOCKABLE,
SECURITY SYSTEM EQUIPMENT RACK WITH FAN.
12. PROVIDE 1RU CABLE MANGEMENT PANEL.
13. PROVIDE FOUR PAIR, CAT-6, 24 AWG SOLID Cu
TWISTED PAIR CABLE. ROUTE IN 3/4" CONDUIT.
14. PROVIDE MULTI MODE, TWO STRAND, OM4 TYPE
FIBER OPTIC CABLE FROM SECURITY SYSTEM EQUIP.
RACK IN 3/4"C TO NIPR FIBER OPTIC PATCH PANEL IN
COMM. RM. 172.
15. NOT USED
16. PROVIDE 24" x 24" x 6" NEMA 1 WALL MTD.
ENCLOSURE FOR IDS SERVER. PROVIDE SURGE
PROTECTION, GROUND BAR, AND TAMPER SWITCH.
17. PROVIDE NEMA 1 WALL MTD. ENCLOSURE FOR
POWER SUPPLY, SEALED BATTERY, 8 CIRCUIT
POWER DISTRIBUTION MODULE, SURGE
PROTECTION, AND TAMPER SWITCH.
18. PROVIDE 3/4" CONDUITS FOR CABLING TO DOOR
INPUT/OUTPUT MODULES AND 12VDC POWER TO
DOOR INPUT/OUTPUT MODULES AND DOOR STRIKES.
19. PROVIDE 2RU CABLE MANAGEMENT PANEL.
N.T.S.A1
SECURITY SYSTEM RISER DIAGRAM - FIRST FLOOR
A
M -0
D E
S
IG
N I
S S
U E
D F
O R
P R
IC
IN
G
/2
A M
-0
G
E N
E R
A L R
E V
IS
IO
N S
/2
17 17
16 16
2" C (TYP)
PROVIDE 4" x 4" WIREWAY
120V, 20A
CKT. TR7A-24
120V, 20A
CKT. TR7A-26
COMM ROOM 246
17 17
16 16
2" C (TYP)
PROVIDE 4" x 4" WIREWAY
120V, 20A
CKT. TR9A-26
120V, 20A
CKT. TR9A-28
COMM ROOM 210
6 5 4 3 2 1 6 5 4 3 2 16 5 4 3 2 1 6 5 4 3 2 1
TO COMM. RM. 153
REFER TO TY601
TO COMM. RM. 153
REFER TO TY601
TO COMM. RM. 146
TO COMM. RM. 118
8 8
208V, 30A
CKT. TR9A-2,4
208V, 30A CKT.
TR7-36,38
US Army Corps of Engineers ®
SHEET ID
U S
A R
M Y
C O
R P
S O
F E
N G
IN
E
E R
S
D R
A W
N B
Y
D E
S
IG
N E
D B
Y
S U
B M
IT
T
E D
B Y
S
IZ
E
C H
E C
K E
D B
Y
A N
S I D
IS
S
U E
D A
T E
C O
N T
R A
C T
N O
S O
L
IC
IT
A
T
IO
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D A
T E
File Path:
Plot Date:
M A
R K
D E
S C
R
IP
T
IO
N
BIM 360://Ellsworth B21/8996-12-Ellsworth AFB B21 FTD_E19.rvt
4/21/2022 10:43:44 AM
TY602
FTD
S E
C U
R
IT
Y R
IS
E
R D
IA
G
R A
M
S E
C O
N D
F L
O O
R
B -2
F
IE
L D
T R
A
IN
IN
G
D E
T A
C H
M E
N T
F
T D
O M
A H
A D
IS
T
R
IC
T C
A P
IT
O
L A
V E
N U
E S
U
IT
E
O M
A H
A N
E B
R A
S K
A
J O
A K
E S
S W
IL
L
IA
M S
D E
L L E
D G
E
T L
/R A
N O
V E
M B
E R
W F
R
ADVERTISEMENT - 100% DESIGN
E L L S
W O
R T
H A
IR
F
O R
C E
B A
S E
S
O U
T H
D A
K O
T A
P R
O J E
C T
N U
M B
E R
F
X B
M
A M
-0
G
E N
E R
A L R
E V
IS
IO
N S
/2
N.T.S.C1
SECURITY SYSTEM RISER DIAGRAM - SECOND FLOOR
GENERAL SHEET NOTES
SHEET KEYNOTES
1. PROVIDE GROUNDING OF ALL EQUIPMENT RACKS,
CONDUIT AND WIREWAYS TO SBB IN COMM. ROOM.
2. REFER TO PLANS FOR LOCATON OF EQUIPMENT.
3. THE CONTRACTOR SHALL PROVIDE RACEWAYS AND
BACK BOXES FOR THE SECURITY SYSTEM AS A BASE
BID. THE SECURITY EQUIPMENT, INCLUDING RACK
AND WIRING SHALL BE INCLUDED AS A BID OPTION.
4. ALL WORK RELATING TO THE BID OPTION:
PROCUREMENT, INSTALLATION, AND
COMMISSIONING OF THE IDS SYSTEM ITSELF MUST
BE DONE BY US CITIZENS.
1. PROVIDE MULTI MODE, TWO STRAND, OM4 TYPE
FIBER OPTIC CABLE FROM SECURITY SYSTEM EQUIP.
RACK IN 3/4"C TO SECURITY SYSTEM EQUIP. RACK IN
COMM. RM. INDICATED.
2. NOT USED
3. PROVIDE 1U, 24 PORT, CAT-6, TYPE T568B WIRING,
RACK MTD. PATCH PANEL.
4. NOT USED
5. NOT USED
6. PROVIDE 24 PORT FIBER PATCH PANEL WITH 24 "LC"
CONNECTORS.
7. NOT USED
8. PROVIDE 3000 VA UPS, 208 VAC IN, 110 VAC OUT.
9. NOT USED.
10. NOT USED
11. PROVIDE WALL MTD., 12RU, ENCLOSED, LOCKABLE,
SECURITY SYSTEM EQUIPMENT RACK WITH FAN.
12. PROVIDE 1RU CABLE MANGEMENT PANEL.
13. PROVIDE FOUR PAIR, CAT-6, 24 AWG SOLID Cu
TWISTED PAIR CABLE. ROUTE IN 3/4" CONDUIT.
14. NOT USED
15. NOT USED
16. PROVIDE 24" x 24" x 6" NEMA 1 WALL MTD.
ENCLOSURE FOR IDS SERVER. PROVIDE SURGE
PROTECTION, GROUND BAR, AND TAMPER SWITCH.
17. PROVIDE NEMA 1 WALL MTD. ENCLOSURE FOR
POWER SUPPLY, SEALED BATTERY, 8 CIRCUIT
POWER DISTRIBUTION MODULE, SURGE
PROTECTION, AND TAMPER SWITCH.
18. PROVIDE 3/4" CONDUITS FOR CABLING TO DOOR
INPUT/OUTPUT MODULES AND 12VDC POWER TO
DOOR INPUT/OUTPUT MODULES AND DOOR STRIKES.
CAM E01
CAM E02
CAM E03
CAM E04
CAM E05
CAM E06
CAM E07
CAM E08
CAM E09
CAM E10
EXTERIOR - MAIN ENTRY
EXTERIOR - NEAR DOOR 130B
NORTHWEST
EXTERIOR - NEAR DOOR 173A
NORTH
EXTERIOR - NEAR ELEC. RM 170
NORTHWEST
EXTERIOR - NEAR ELEC. RM. 170
NORTHWEST
EXTERIOR - NEAR DOOR 167B
NORTH
EXTERIOR - NEAR DOOR 159C
NORTHEAST
EXTERIOR - NEAR DOOR 154C
SOUTHEAST
EXTERIOR - NEAR DOOR 115A
SOUTH
EXTERIOR - NEAR DOOR 150A
EAST
PROVIDE CAT 6 STP 23 AWG COPPER
CABLE FROM EACH CAMERA TO
DEDICATED PATCH PANEL IN TELECOM.
EQUIPMENT RACK LOCATED IN MAIN
COMM. RM. 172. ROUTE EACH CABLE IN 1"
CONDUIT. ALL CONDUIT SHALL BE ROUTED
UNDERGROUND TO COMM. RM. 172. NO
CONDUIT SHALL BE ROUTED THROUGH
ANY SECURE AREAS. TERMINATE TO 16
PORT POE NETWORK SWITCH MOUNTED IN
RACK ADJACENT TO PATCH PANEL. REFER
TO TELECOM. RISER DIAGRAM T-601
PROVIDE SURGE SUPPRESSOR AT
EACH CAMERA LOCATION AND
GROUND TO BLDG. STEEL. (TYP)
CAM E11 EXTERIOR - NEAR DOOR 144B
SOUTH
US Army Corps of Engineers ®
SHEET ID
U S
A R
M Y
C O
R P
S O
F E
N G
IN
E
E R
S
D R
A W
N B
Y
D E
S
IG
N E
D B
Y
S U
B M
IT
T
E D
B Y
S
IZ
E
C H
E C
K E
D B
Y
A N
S I D
IS
S
U E
D A
T E
C O
N T
R A
C T
N O
S O
L
IC
IT
A
T
IO
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D A
T E
File Path:
Plot Date:
M A
R K
D E
S C
R
IP
T
IO
N
BIM 360://Ellsworth B21/8996-12-Ellsworth AFB B21 FTD_E19.rvt
4/22/2022 8:44:25 AM
TY604
FTD
C C
T V
S Y
S T
E M
R
IS
E R
D
IA
G R
A M
B -2
F
IE
L D
T R
A
IN
IN
G
D E
T A
C H
M E
N T
F
T D
O M
A H
A D
IS
T
R
IC
T C
A P
IT
O
L A
V E
N U
E S
U
IT
E
O M
A H
A N
E B
R A
S K
A
J O
A K
E S
S W
IL
L
IA
M S
D E
L L E
D G
E
T L
/R A
N O
V E
M B
E R
W F
R
ADVERTISEMENT - 100% DESIGN
E L L S
W O
R T
H A
IR
F
O R
C E
B A
S E
S
O U
T H
D A
K O
T A
P R
O J E
C T
N U
M B
E R
F
X B
M
N.T.S.C3
CCTV SYSTEM RISER DIAGRAM
GENERAL SHEET NOTES
1. REFER TO PLANS FOR LOCATION OF EQUIPMENT.
2. THE CONTRACTOR SHALL PROVIDE RACEWAYS AND
BACK BOXES FOR THE CCTV SYSTEM AS A BASE BID.
THE CCTV EQUIPMENT, INCLUDING CAMERAS, 16
PORT POE NETWORK SWITCH, WIRING, AND
COMMISSIONING SHALL BE INCLUDED AS A BID
OPTION. CAMERAS SHALL BE POE TYPE CAMERAS,
COMPATIBLE WITH THE VICAD SYSTEM, AND ON THE
AIR FORCE APPROVED EQUIPMENT LIST.
3. CONTRACTOR INSTALLING THE SYSTEM SHALL HAVE
A MINIMUM OF 2 YEARS EXPERIENCE INSTALLING
AND MAINTAINING VICAD SYSTEMS AND HAVE
CERTIFIED VICADS TRAINING WITHIN THE LAST 2
YEARS.
4. CCTV SYSTEM SHALL BE MONITORED BY THE BASE
DEFENSE OPERATIONS CENTER (BDOC).
5. ALL WORK RELATING TO THE BID OPTION:
PROCUREMENT, INSTALLATION, AND
COMMISSIONING OF THE CCTV SYSTEM ITSELF MUST
BE DONE BY US CITIZENS.
A
M -0
D E
S
IG
N I
S S
U E
D F
O R
P R
IC
IN
G
/2
A M
-0
G
E N
E R
A L R
E V
IS
IO
N S
/2
| T-501 TELECOMMUNICATIONS DETAILS |
| Sheets |
| T-501 - TELECOMMUNICATIONS DETAILS |
| TY601 SECURITY RISER DIAGRAM - FIRST FLOOR |
| Sheets |
| TY601 - SECURITY RISER DIAGRAM - FIRST FLOOR |
| TY602 SECURITY RISER DIAGRAM - SECOND FLOOR |
| Sheets |
| TY602 - SECURITY RISER DIAGRAM - SECOND FLOOR |
| TY604 CCTV SYSTEM RISER DIAGRAM |
| Sheets |
| TY604 - CCTV SYSTEM RISER DIAGRAM |
File details come from the government source that posted it. Updated .