The file's text, extracted by GovTribe without its formatting.
Technical Exhibit 7.4.1 Contractor Personnel Minimum Qualifications, Licensing, and Certifications
| Item # |
| Position |
| Years of Experience |
(do not include apprenticeship or time learning the trade, craft, or position)
| Requirement/Certification |
| Training |
| PWS Paragraph Number |
| 1 |
| Project Manager (PM) |
| 15 or more years of experience managing base operations support functions and familiarity with Army cost and software data programs |
| Certified Facility Manager or |
Batchelor of Science Degree in Facility Management
| Shall have a Batchelor of Science degree in engineering, mathematics, business, public administration and/or quantitative analysis and 15 or more years of experience managing base operations support functions and familiarity with Army cost and software data programs. |
| 1.6.11 |
| 2 |
| Alternate Project Manager (APM) |
| 15 or more years of experience managing base operations support functions and familiarity with Army cost and software data programs |
| Certified Facility Manager or |
Batchelor of Science Degree in Facility Management
| Shall have a Batchelor of Science degree in engineering, mathematics, business, public administration and/or quantitative analysis and 15 or more years of experience managing base operations support functions and familiarity with Army cost and software data programs. |
| 1.6.11 |
| 3 |
| Contractor Quality Control Representative (CQCR) |
| 5 years experience performing quality control management functions in Public Works base operations contract environment. Experience to include (but not limited to) managing the overall quality program, deficiency identification/correction, and analyzing performance data to correct and improve performance, |
| QCCR - certification from https://asq.org/cert for the Quality Control Representative, or equal organization. Additionally may include certifications in one or more of the disciplines: Quality Inspector/Quality Process Analyst/ Quality Technician |
1.6.11
| 4 |
| Head Estimator |
| 5 years’ experience as a Planner/Estimator. |
| American Society of Professional Estimators |
1.6.11
| 5 |
| Projects (PWO) Manager |
| 5 years’ experience in managing/executing projects (PWOs) |
| Project Management Professional thru Project Management International |
1.6.11
| 6 |
| Pest Control Supervisor |
| 8 years of documented experience as a certified pest control applicator |
| Licensed IAW State of Georgia Department of Agriculture "Georgia Pesticide Use and Application Act of 1976." (Ga. L. 1972, p. 849, 1; Ga. L. 1976, p. 369, 1.) as a certified commercial applicator |
| Pass the core (general competency) examination plus an examination in the qualified category(ies) for certification. |
| 1.6.11 |
| 7 |
| Pest Control Applicator |
| 70 hours of on-the-job training experience under the constant supervision of a certified operator or a registered employee in the category(ies) in which registration is sought and pass the employee registration examination. |
| Certified by Department of Defense (DoD) or the State of Georgia in the following functional areas: Ornamental and Turf, Aquatic, Right of Way, Industrial/Institutional, Structural & Health Related, and Public Health |
| 10 hours of classroom training as outlined in the Georgia Department of Agriculture Employee Registration Manual |
| 5.5 |
| 8 |
| Environmental/ Safety/Health Manager |
| 4 years’ experience in supervising safety environmental programs. |
| None |
| Bachelors Degree in Environmental Engineering. from an Accreditation Board of Engineering and Technology (ABET) university or related education |
| 1.6.11 |
| 9 |
| HVAC Mechanic |
| 4 years’ journeyman’s experience in trade |
| Certification to operate, maintain, and repair AC, evaporative cooling, dehumidification, and mechanical ventilation equipment. |
1.6.11 5.6
| 10 |
| Plant Supervisor |
| 10 years’ experience in a high pressure steam or pressurized high-temperature water generating plant as a stationary operating engineer and shall have a minimum of 2 years’ experience as a plant supervisor or plant foreman |
| Currently certified per AR 420-1, Section 23–8, Utility plant operators. |
| Continuing education per AR 420-1. . |
| 1.6.11 |
5.9
| 11 |
| Plant Operating Personnel |
| 3 years’ experience in operating high pressure steam or pressurized high-temperature water generating plants or shall have completed a 4 year apprenticeship program by International Union of Operating Engineers and be capable of determining the causes of malfunctions of generating plants and take corrective actions, perform any type of boiler water analysis as well as a combustion analysis and stack gas analysis and provide necessary correction, and, perform operator and preventive maintenance at all plants |
| Currently certified per AR 420-1, Section 23–8, Utility plant operators. |
| 6,000 hours of OJT under the supervision of a qualified boiler operator or stationary engineer. |
| 1.6.11 |
5.9
| 12 |
| Instrument Mechanics |
| 3 years’ experience in maintenance, repair and calibration of DDC control systems, combustion controls, recording instruments, flow controls, safety devices, thermostatic controls pressure and temperature reducing valves, outside weather controls, immersion type aqua static controls, pressure and vacuum gauges, limit switches and other instruments, gauges and controls used in plant operations |
5.6
| 14 |
| Other supervisors supervising more than 15 personnel |
| 5 Years’ experience as a supervisor of personnel in similar trades and at least 15 subordinates |
1.6.11
| 17 |
| Locksmith |
| 2 Years’ experience with Magazine Security, X-07, 08, 09 and 10 locking devices, containers, and safes. |
| U.S. DoD Lock Program certified in X-07, 08, 09, and 10 safe locks. |
Certified as a GSA Safe and Vault Technician – Inspector.
| X-07, 08, 09, 10 locking devices and equal components. Training and re-certification as required. |
| 5.6.1.3 |
| 18 |
| Foreman/Lead Fire Detection Systems System Mechanic |
| 5 Years’ experience with Pneumatic, Electric Deluge Systems, and Halon Systems |
| National Institute for Certifying Engineering Technologies (NICET) |
-LEVEL III Certification Fire Alarm Systems -LEVEL III Certification for Water Based Suppression Systems.
-Certified ONYX Systems Operator -Certified by MONACO for D21 and BTXM transmitter.
-NICET LVL IV Special Hazards Certification. ICC/NAFED (International Code Council/National Association of Fire Equipment Distributors) for Portable Fire Extinguishers and Pre-Engineered Kitchen Fire Extinguishing Systems.
| Basic Explosive Safety Technology, NFPA-72 training every 3 years |
| 5.6.1.5.8 |
| 19 |
| Fire Suppression System Mechanic |
| 5 Years’ experience with installation, maintenance, repair, and troubleshooting of water / clean agent based systems and suppression system control panels. |
| National Institute for Certifying Engineering Technologies (NICET) |
-LEVEL III Certification Fire Alarm Systems.
-LEVEL III Water Based Systems.
-LEVEL IV Special Hazards.
-ICC/NAFED (International Code Council/National Association of Fire Equipment Distributors) for Portable Fire Extinguishers and Pre-Engineered Kitchen Fire Extinguishing Systems.
Basic Explosive Safety Technology, NFPA-72, NFPA-17, NFPA-13, and NFPA 25 training every 3 years.
| 20 |
| Fire Detection System Mechanic |
| 5 Years’ experience with installation, programing, maintenance, repair, and troubleshooting Intelligent and Non Intelligent fire detection and Suppression System Control Panels, IDC, NAC, SLC, Voice Evacuation Systems, Supervising Stations and Fire Alarm Signal/Transmission Media. |
| National Institute for Certifying Engineering Technologies (NICET) LEVEL III Certification Fire Alarm Systems. Certified ONYX Systems operator. Certified by MONACO for D21 and BTXM transmitter. |
| Basic Explosive Safety Technology, NFPA-72 training every 3 years |
| 5.6.1.5.8 |
| 21 |
| Welding |
| 3 Years’ experience with each of the welding processes utilized. |
| 49 CFR 192.227, Qualification of Welders |
| Successful completion of training from a Certified Welding Program. |
| 5.6.1.7 5.9.1.2.4.3 |
| 22 |
| Asbestos Abatement |
| 2 Years’ experience with asbestos abatement and disposal |
| Licensed IAW Rules or Georgia Department of Natural Resources Environmental Protection Division, Chapter 391-3-14, Asbestos Removal and Encapsulation, June 1996. |
| Training IAW Rules or Georgia Department of Natural Resources Environmental Protection Division, Chapter 391-3-14, Asbestos Removal and Encapsulation, June 1996 and Record of respirator fit test, SCBA |
| 5.4.3.7 |
| 23 |
| Electricians, Air Conditioning Mechanics, Low Voltage Technicians, Plumbers, Metal Workers |
| 4 years’ journeyman’s experience in trade |
| Georgia Secretary of State Licensing Board or equivalent. |
| Georgia Secretary of State Licensing Board or equivalent. |
| 1.6.11 5.3 |
5.6 5.9
| 24 |
| Landfill Manager |
| 6 months of experience as a landfill operator in the State of Georgia, or must be employed by the State of Georgia for the purpose of conducting landfill compliance inspections |
| State of Georgia Landfill Operator Certification IAW Georgia Comprehensive Solid Waste Management Act, G.A. § 12-8-20 et seq. |
| High-school graduate or completed an accredited GED program and successfully complete Georgia Landfill Operator Certification Training |
| 1.6.11 5.9.4 5.9.4.4 |
| 25 |
| Landfill Operator |
| 6 months of experience as a landfill operator in the State of Georgia, or must be employed by the State of Georgia for the purpose of conducting landfill compliance inspections |
| State of Georgia Landfill Operator Certification IAW Georgia Comprehensive Solid Waste Management Act, G.A. § 12-8-20 et seq. |
| High-school graduate or completed an accredited GED program and successfully complete Georgia Landfill Operator Certification Training |
| 1.6.11 5.9.4 |
| 26 |
| Equipment Operator |
| 3 Years’ experience as operator of same type of equipment |
| Valid state driver’s license and/or equipment certification if required |
5.7 5.8