TE-BBB-1_AST-UllageLog_Revision 1.docx

TE-BBB-1

AST Ullage Log 11/14/2018 Revision 1

ABOVEGROUND STORAGE TANK ULLAGE LOG

Use a separate log sheet for each tank

Use either this form or its equivalent to document ullage (available capacity) calculations as required by Utah’s Storage Tank Regulations. Use the correct tank chart to convert from inches to gallons. If ullage is calculated by an ATG, it is acceptable to save the ATG inventory tape that shows the ullage in gallons. Keep these records at least six (6) months. However, it is advisable to keep records indefinitely, since they may be required as part of the compliance review concerning a claim for reimbursement from the Petroleum Storage Tank Fund. The requirement to determine ullage before delivery begins applies to all ASTs, including ASTs equipped with overfill prevention equipment that stops delivery or sounds an audible alarm.

Facility name

Fac. ID # (if known)

Street address

Product in tank

City

ZIP

Tank capacity (gallons)

Report Suspected or Confirmed Leaks to the Dugway Environmental Compliance Division @ 435-831-3218