Part_2e_-_Toe_Seep_Modifications_Plans_and_Specs_4-7-2015.pdf

This document is a credentials and specification sheet for a Watertronics pump station installed as part of the Summitville Dam Toe Seep Modifications project in Colorado. The pump station, model STP-9X2-208-3 with serial number 2011-427, is designed to transfer water at 100 gallons per minute at 100 pounds per square inch. The system features dual 9-horsepower Grindex pumps operating at 3,600 RPM with a total dynamic head of 99 feet each, powered by a 208-volt, three-phase, 60-hertz electrical system requiring a 100-amp disconnect. The pump station is equipped with a Siemens combination motor starter, a CONERY level float control system, and a SIGMA programmable logic controller with a 7.5-inch touchscreen interface for operational monitoring and control.

The system includes multiple alarm functions for low pressure, high pressure, phase/voltage monitoring, wet well level detection, and motor starter fault detection. Each pump motor has a full load amperage of 23.3 amps, with a station full load amperage of 54.0 amps. The electrical schematic documentation is referenced as SC11427 1-6. This credentials document serves as a permanent reference record for the pump station equipment specifications and performance parameters, intended to be retained for future maintenance, troubleshooting, and operational reference throughout the facility's operational life.