FA8902-07-R-1003(29Aug07)FINAL.pdf

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

RATING

N

PAGE OF PAGES

1 35

3. SOLICITATION NO.2. CONTRACT NO.

FA8902-07-R-1003

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

5. DATE ISSUED

29 AUG 2007

6. REQUISITION/PURCHASE NO.

7. ISSUED BY 77 AESG/PSK CODE FA8902 8. ADDRESS OFFER TO (If other than Item 7)

AIR FORCE MATERIEL COMMAND

77 AESG/PSK

7980 LINDBERGH LANDING

BROOKS CITY BASE TX 78235-5119

ANGELICA R. ARMENTA 210-536-6320

ANGELICA.ARMENTA@BROOKS.AF.MIL

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.

SOLICITATION

9. ALL PROPOSALS SUBMITTED IN RESPONSE TO THIS REQUEST FOR PROPOSALS (RFP) MUST BE RECEIVED BY THE OFFICE IN BLOCK 7 NO LATER

THAN 4:00PM CDT ON 15 OCTOBER 2007.

10. FOR

INFORMATION

CALL:

A. NAME

ANGELICA R. ARMENTA

B. TELEPHONE (Include area code)

(NO COLLECT CALLS)

210-536-4892

C. E-MAIL ADDRESS

angelica.armenta@brooks.af.mil

11. TABLE OF CONTENTS

() SEC. DESCRIPTION PAGE(S) () SEC DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM 1 I CONTRACT CLAUSES 27

B SUPPLIES OR SERVICES AND PRICES/COSTS 2 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACH.

C DESCRIPTION/SPECS./WORK STATEMENT 12 J LIST OF ATTACHMENTS 35

D PACKAGING AND MARKING 13 PART IV - REPRESENTATIONS AND INSTRUCTIONS

E INSPECTION AND ACCEPTANCE 14 K REPRESENTATIONS, CERTIFICATIONS, K - 1

F DELIVERIES OR PERFORMANCE 15 AND OTHER STATEMENTS OF OFFERORS

G CONTRACT ADMINISTRATION DATA 21 L INSTRS, CONDS, AND NOTICES TO OFFERORS L - 1

H SPECIAL CONTRACT REQUIREMENTS 22 M EVALUATION FACTORS FOR AWARD M - 1

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within ____180____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date of receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

10 CALENDAR DAYS

20 CALENDAR DAYS

30 CALENDAR DAYS

CALENDAR DAYS

14. ACKNOWLEDGEMENTS OF AMENDMENTS

(The offeror acknowledges receipt of amend-

AMENDMENT NO. DATE AMENDMENT NO. DATE

ments to the SOLICITATION for offerors and related documents numbered and dated:

15A. NAME

AND

CODE FACILITY 16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

ADDRESS

OF

OFFEROR

15B. TELEPHONE NO. (Include area code)

15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETI-

TION: 23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)

PREVIOUS EDITION IS UNUSABLE Prescribed by GSA ConWrite Version 6.8.12 FAR (48 CFR) 53.21(c) Created 29 Aug 2007 7:09 AM

PART I - THE SCHEDULE

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0001 1 __________ Lot __________

Noun: SYSTEM DEVELOPMENT AND DEMONSTRATION (SDD) NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of the MACH System in accordance with the CSOW, manufacture and transportation of 10 Operational Assessment (OA) Test Articles, CDRL requirements of Exhibit A, and Government OA Test Support. Of the required OA Test Articles, 1 is to be JHMCS compatible and 9 are to be PNVG/NVG compatible.

Delivery of OA Test Articles shall be made in accordance with Section F clauses 52.211- 08, Time of Delivery and F007, Shipment Address. Acceptance is to be made upon completion of Government OA.

0002 1 __________ Lot __________

Noun: SDD DATA (CDRLS) NSN: N - Not Applicable DD1423 is Exhibit: A Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This line item is Not Separately Priced (NSP).

1001 OPTION CLIN (supply) __________

Noun: AH-1W INTERFACE SDD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the AH-1W Module and CDRL requirements of Exhibit A.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1002 OPTION CLIN (supply) __________

Noun: AH-64 INTERFACE SDD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the AH-64 Module and CDRL requirements of Exhibit A.

1003 OPTION CLIN (supply) __________

Noun: NIGHT VISION CUEING DISPLAY (NVCD) INTERFACE SDD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the NVCD Module and CDRL requirements of Exhibit A.

1004 OPTION CLIN (supply) __________

Noun: JOINT STRIKE FIGHTER (JSF) HELMET MOUNTED

DISPLAY INTERFACE SDD

NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the JSF Helmet Mounted Display Module and CDRL requirements of Exhibit A.

1005 OPTION CLIN (supply) __________

Noun: MAXILLOFACIAL SHIELD SDD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the Maxillofacial Shield Module and CDRL requirements of Exhibit A.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1006 OPTION CLIN (supply) __________

Noun: INDEPENDENT VOLUME CONTROL SDD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the Independent Volume Control Module and CDRL requirements of Exhibit A.

1007 OPTION CLIN (supply) __________

Noun: EXTERNAL AUDIO SDD NSN: N - Not Applicable DD1423 is Exhibit:

Contract type: L - FIXED PRICE INCENTIVE FIRM Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the development of an interface for compatibility with the External Audio Module and CDRL requirements of Exhibit A.

1008 OPTION CLIN (supply) __________

Noun: INITIAL OPERATIONAL TEST & EVALUATION (IOT&E) NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the support necessary during Government IOT&E as described in SOO Paragraph 6.9, as well as the manufacture and transportation of 180 IOT&E articles. Of these IOT&E articles, 30 are to be JHMCS compatible and 150 are to be PNVG compatible.

Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1009 OPTION CLIN (supply) __________

Noun: LOW RATE INITIAL PRODUCTION (LRIP) UNITS NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transporation of Production Representative units and CDRL requirements of Exhibit B. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 2,250 Production Representative units, all to be NVG/PNVG compatible.

1010 OPTION CLIN (supply) __________

Noun: LRIP DATA (CDRLS) NSN: N - Not Applicable DD1423 is Exhibit: B Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This line item is Not Separately Priced (NSP).

1011 OPTION CLIN (supply) __________

Noun: REPROCUREMENT PACKAGE NSN: N - Not Applicable DD1423 is Exhibit: B Contract type: J - FIRM FIXED PRICE Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with the delivery of a complete production reprocurement package to enable competition of future production. Drawings and associated lists shall not contain any proprietary parts, subassemblies, materials and/or process and shall be submitted in accordance with CDRL B008.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2001 OPTION CLIN (supply) __________

Noun: FULL RATE PRODUCTION (FRP) UNITS, YR 1 NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of MACH Fixed Wing/Rotary Wing units and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is 6,000 units.

2002 OPTION CLIN (supply) __________

Noun: AH-64 MODULE INTERFACE NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of AH- 64 MACH module interfaces and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 250 units.

2003 OPTION CLIN (supply) __________

Noun: JHMCS MODULE INTERFACE NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of JHMCS MACH module interfaces and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 300 units.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2004 OPTION CLIN (supply) __________

Noun: MAXILLOFACIAL SHIELD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of MACH Maxillofacial Shields and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 2,000 units.

2005 OPTION CLIN (supply) __________

Noun: FRP DATA (CDRLS) NSN: N - Not Applicable DD1423 is Exhibit: C Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This line item is Not Separately Priced (NSP).

3001 OPTION CLIN (supply) __________

Noun: FULL RATE PRODUCTION (FRP) UNITS, YR 2 NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of MACH Fixed Wing/Rotary Wing units and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is 6,000 units.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

3002 OPTION CLIN (supply) __________

Noun: AH-64 MODULE INTERFACE NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of AH- 64 MACH module interfaces and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 250 units.

3003 OPTION CLIN (supply) __________

Noun: JHMCS MODULE INTERFACE NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of JHMCS MACH module interfaces and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 300 units.

3004 OPTION CLIN (supply) __________

Noun: MAXILLOFACIAL SHIELD NSN: N - Not Applicable Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: SOURCE Acceptance: SOURCE

FOB: DESTINATION

Descriptive Data:

This CLIN shall include all costs associated with manufacture and transportation of MACH Maxillofacial Shields and CDRL requirements of Exhibit C. Delivery shall be made in accordance with Section F clauses 52.211-08, Time of Delivery and F007, Shipment Address.

Best Estimated Quantity (BEQ) for this line item is a maximum of 2,000 units.

SECTION B FA8902-07-R-1003

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

3005 OPTION CLIN (supply) __________

Noun: FRP DATA (CDRLS) NSN: N - Not Applicable DD1423 is Exhibit: C Contract type: L - FIXED PRICE INCENTIVE SUCCESSIVE TARGET Inspection: DESTINATION Acceptance: DESTINATION

FOB: DESTINATION

Descriptive Data:

This line item is Not Separately Priced (NSP).

SECTION B FA8902-07-R-1003

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

B028 CONTRACT TYPE: FIRM FIXED PRICE (FEB 1997)

Total Price TBD @ time of award

Applicable to following Line Items: ALL Applies to Firm-Fixed-Price CLIN(s) only.

B030 CONTRACT TYPE: FIXED- PRICE- INCENTIVE -- FIRM TARGET (FEB 1997)

The target cost, target profit, and target price contemplated by the contract clause entitled, "Incentive Price Revision-- Firm Target," are set forth below. The contract line items subject to price revision, ceiling price, and the profit adjustment formula are set forth in 52.216-16.

Target Cost TBD @ time of award Target Profit TBD @ time of award Target Price TBD @ time of award Ceiling Price TBD @ time of award

Applicable to following Line Items: 0001

Option CLINs 1001, 1002, 1003, 1004, 1005, 1006 and 1007 will be added to the above via modification when exercised. The negotiated target costs, profits and prices for these Option CLINs are set forth in Section H Clause, H001, Options.

Applies to Fixed-Price Incentive (Firm Target) CLIN(s) only.

B031 CONTRACT TYPE: FIXED- PRICE- INCENTIVE -- SUCCESSIVE TARGET (FEB 1997)

The target cost, target profit, and target price contemplated by the contract clause entitled, "Incentive Price Revision-- Successive Target," are set forth below. The contract line items subject to price revision, ceiling price, and the profit adjustment formula are set forth in 52.216-17.

Target Cost TBD @ time of award Target Profit TBD @ time of award Target Price TBD @ time of award Ceiling Price TBD @ time of award

Applicable to following Line Items: 1008, 1009, 2001, 2002, 2003, 2004, 3001, 3002, 3003 and 3004

The negotiated target costs, profits and prices for these Option CLINs are set forth in Section H Clause, H001, Options.

Applies to Fixed-Price Incentive (Successive Targets) CLIN(s) only.

B039 INDEFINITE QUANTITY (DEC 2005)

This is an Indefinite Quantity contract as contemplated by FAR 16.504. The total scope of the technical tasks for which orders may be issued is set forth in paragraph TBD @ time of award of the attached Contractor Statement of Work (CSOW). The maximum dollar amount the Government may order under this contract is TBD @ time of award; the minimum amount is $1,100,000.00.

SECTION B FA8902-07-R-1003

B049 OPTIONS (APR 2000)

The Government may require performance of the work required by CLIN(s) 1001-1011, 2001-2005 and 3001-3005. The Contracting Officer shall provide written notice of intent to exercise this option to the Contractor on or before 60 days prior to exercising the option. If the Government exercises this option(s) by the period of performance start dates for each respective CLIN as called out in Section F, Clause F001 , the Contractor shall perform at the estimated cost and fee, if applicable, set forth as follows:

In accordance with Section B entitled "Supplies or Services and Prices/Costs" and Section H Clause H001 entitled "Options".

SECTION C - DESCRIPTION/SPECS./WORK STATEMENT

SECTION C FA8902-07-R-1003

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

C001 WORK DESCRIPTION/SPECIFICATION (MAY 1997)

Work called for by the contract line items specified in SECTION B shall be performed in accordance with the following:

CONTRACT LINE ITEM NUMBERS (CLINs) DESCRIPTION/SPECIFICATIONS

ALL GOVERNMENT PERFORMANCE

SPECIFICATION AND CONTRACTOR STATEMENT OF WORK

C002 REFERENCE TO SPECIFIC PARAGRAPHS OF THE STATEMENT OF WORK (MAY 1997)

Reference to specific paragraphs of the Statement of Work (SOW) indicates only where the CLIN/SubCLIN requirement is principally described and does not absolve the Contractor from the requirement to comply with the contractual provisions applicable to those CLINs/SubCLINs.

SECTION D - PACKAGING AND MARKING

SECTION D FA8902-07-R-1003

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

AIR FORCE MATERIEL COMMAND FEDERAL ACQUISITION REGULATION SUPPLEMENT

CONTRACT CLAUSES

5352.217-9008 ASSIGNMENT OF NATIONAL STOCK NUMBERS (AFMC) (AUG 1998)

CLIN/SubCLIN(s) '1009, 2001 and 3001' Responsible Government office symbol, location and phone number 'Warner Robins, WR-ALC/542 MSUG/GBHLBC, Robins AFB, GA 31098'

5352.247-9005 SHIPPING CONTAINER MARKING (AFMC) (MAR 2003)

Para (a). Current edition. 'P' Para (b). Current edition. 'P' Para (c). Current edition. 'P' Para (c). Additional marking or bar code requirements: '20070205'

II. NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

D001 PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS (FEB 1997)

Preservation, packaging, packing and marking shall be set forth in the individual order.

SECTION E - INSPECTION AND ACCEPTANCE

SECTION E FA8902-07-R-1003

NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996)

52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) - ALTERNATE I (JUL 1985)

52.246-07 INSPECTION OF RESEARCH AND DEVELOPMENT -- FIXED-PRICE (AUG 1996)

52.246-09 INSPECTION OF RESEARCH AND DEVELOPMENT (SHORT FORM) (APR 1984)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999)

Title, number (if any), date, and tailoring (if any) of the higher-level quality standards: 'ISO 9001:2000 Quality Management Systems - Requirements published 15 Dec 00; OR Equivalent QMS (specify below):

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

B. DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2003)

SECTION F - DELIVERIES OR PERFORMANCE

SECTION F FA8902-07-R-1003

SHIP MARK TRANS

ITEM SUPPLIES SCHEDULE DATA QTY TO FOR PRI DATE

0001 1 FA8902 24 MARO

Noun: SYSTEM DEVELOPMENT AND DEMONSTRATION

(SDD)

Descriptive Data:

Ship test units to:

Attn: MACH Program Manager

648 AESS/TAAM

7980 Lindbergh Landing Brooks City-Base, TX 78235

0002 1 FA8902 ASREQ

Noun: SDD DATA (CDRLS)

SECTION F FA8902-07-R-1003

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.242-15 STOP-WORK ORDER (AUG 1989)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

52.247-34 F.O.B. DESTINATION (NOV 1991)

52.247-48 F.O.B. DESTINATION -- EVIDENCE OF SHIPMENT (FEB 1999)

II. NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES IN FULL TEXT

52.211-08 TIME OF DELIVERY (JUN 1997) (TAILORED)

(a) The Government requires delivery to be made according to the following schedule:

APPLICABLE TO CLINS 0001, 1008, 1009, 2001, 2002, 2003, 2004, 3001, 3002, 3003 AND 3004 ONLY

REQUIRED DELIVERY SCHEDULE

LINE ITEM DESCRIPTION QUANTITY WITHIN MONTHS

AFTER DATE OF

BASIC CONTRACT

(MARO)

0001 Operational Assessment Test Articles - JHMCS

1 EA 20 MARO

0001 Operational Assessment Test Articles - NVG/PNVG

9 EA 20 MARO

1008 IOT&E Articles - JHMCS Compatible

30 EA 26 MARO

1008 IOT&E Articles - NVG/PNVG Compatible

150 EA 26 MARO

1009 LRIP Units - NVG/PNVG Compatible

500 EA 34 MARO

1009 LRIP Units - NVG/PNVG Compatible

750 EA 35 MARO

1009 LRIP Units - NVG/PNVG Compatible

1,000 EA 36 MARO

2001 FRP Units - NVG/PNVG Compatible

1,000 EA per month (12,000 total)

37 thru 48 MARO

2002 AH-64 Module Interface 20 EA per month (220 total)

37 thru 47 MARO

2002 AH-64 Module Interface 30 EA 48 MARO 2003 JHMCS Module Interface 25 EA per month

(300 total) 37 thru 48 MARO

2004 Maxillofacial Shield 166 EA per month (1,826 total)

37 thru 47 MARO

2004 Maxillofacial Shield 174 EA 48 MARO

SECTION F FA8902-07-R-1003

3001 FRP Units - NVG/PNVG Compatible

1,000 EA per month (12,000 total)

49 thru 60 MARO

3002 AH-64 Module Interface 20 EA per month (220 total)

49 thru 59 MARO

3002 AH-64 Module Interface 30 EA 60 MARO 3003 JHMCS Module Interface 25 EA

(300 total) 49 thru 60 MARO

3004 Maxillofacial Shield 166 EA (1,826 total)

49 thru 59 MARO

3004 Maxillofacial Shield 174 EA 60 MARO

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

LINE ITEM DESCRIPTION QUANTITY WITHIN MONTHS

AFTER DATE OF

BASIC CONTRACT

(MARO)

0001 Operational Assessment (OA) Test Articles - JHMCS

1 EA

0001 Operational Assessment (OA) Test Articles - NVG/PNVG

9 EA

1008 IOT&E Articles - JHMCS Compatible

30 EA

1008 IOT&E Articles - NVG/PNVG Compatible

150 EA

1009 LRIP Units - NVG/PNVG Compatible

500 EA

1009 LRIP Units - NVG/PNVG Compatible

750 EA

1009 LRIP Units - NVG/PNVG Compatible

1,000 EA

2001 FRP Units - NVG/PNVG Compatible

12,000 EA

2002 AH-64 Module Interface 250 EA 2003 JHMCS Module Interface 300 EA 2004 Maxillofacial Shield 2,000 EA 3001 FRP Units - NVG/PNVG

Compatible

12,000 EA

3002 AH-64 Module Interface 250 EA 3003 JHMCS Module Interface 300 EA 3004 Maxillofacial Shield 2,000 EA

SECTION F FA8902-07-R-1003

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

B. OTHER CONTRACT CLAUSES IN FULL TEXT

F001 OPTION CLIN PERFORMANCE PERIOD(S) (FEB 1998) (TAILORED)

The respective performance periods for options identified in Section B are as follows:

CLIN Number Period of Performance

1001 03 MAR 2009 - 02 MAR 2010

1002 03 MAR 2009 - 02 MAR 2010

1003 03 MAR 2009 - 02 MAR 2010

1004 03 MAR 2009 - 02 MAR 2010

1005 03 MAR 2009 - 02 MAR 2010

1006 03 MAR 2009 - 02 MAR 2010

1007 03 MAR 2009 - 02 MAR 2010

1008 03 MAR 2010 - 02 DEC 2010

1009 03 DEC 2010 - 02 MAR 2011

1010 03 DEC 2010 - 02 MAR 2011

1011 03 DEC 2010 - 02 MAR 2011

2001 03 MAR 2011 - 02 MAR 2012

2002 03 MAR 2011 - 02 MAR 2012

2003 03 MAR 2011 - 02 MAR 2012

2004 03 MAR 2011 - 02 MAR 2012

2005 03 MAR 2011 - 02 MAR 2012

3001 03 MAR 2012 - 02 MAR 2013

3002 03 MAR 2012 - 02 MAR 2013

3003 03 MAR 2012 - 02 MAR 2013

3004 03 MAR 2012 - 02 MAR 2013

3005 03 MAR 2012 - 02 MAR 2013

F002 PERIOD OF PERFORMANCE (FEB 1997) (TAILORED)

Period of Performance for each CLIN under this contract shall be as set forth below:

CLIN 0001 Date of award - 02 MAR 2010 CLIN 0002 Date of award - 02 MAR 2010

For Option CLIN Periods of Performance, reference clause F001.

Overall, the contract Period of Performance is from date of award through 02 MAR 2013.

SECTION F FA8902-07-R-1003

F003 CONTRACT DELIVERIES (FEB 1997)

The following terms, if used within this contract in conjunction with contract delivery requirements (including data deliveries), are hereby defined as follows:

(a) "MAC" and "MARO" mean "months after the effective date for award of the contractual action (as shown in block 3, Section A, SF 26)".

(b) "WARO" means "weeks after the effective date for award of the contractual action".

(c) "DARO" means "days after the effective date for award of the contractual action".

(d) "ASREQ" means "as required". Detailed delivery requirements are then specified elsewhere in Section F.

F007 SHIPMENT ADDRESS (SEP 1997) (TAILORED)

OA Test Articles are to be shipped to the address below:

Quantity of 10ea (1 JHMCS compatible, 9 NVG/PNVG compatible) to DoDAAC FA8902

648 AESS/TAAH

Attn: MACH Program Manager 7980 Lindbergh Landing Brooks City-Base, TX 78235-5119

IOT&E Articles are to be shipped to the address below:

Quantity of 150ea (24 JHMCS compatible, 126 NVG/PNVG compatible) to DoDAAC FB2805

HQ AFOTEC/XOS

303 West C Avenue Bldg 230 Suite 119 Eglin AFB, FL 32542-6833

Quantity of 30ea (6 JHMCS compatible, 24 NVG/PNVG compatible) to DoDAAC N00421

NAVAIR PMA 202 AIR-1.1

Attn: Derwin Hansard 48110 Shaw Road, Unit 5 Building 2187, Room 1B56 Patuxent River, MD 20670-1906

Low Rate Initial Production Units are to be shipped to the addresses below:

Quantity of 10ea (all NVG/PNVG compatible) to DoDAAC FV3020

361 TRS/RW

Attn: MSgt Michael Watson 717 9th Avenue, Bldg 961 Sheppard AFB, TX 76311

Quantity of 50ea (all NVG/PNVG compatible) to DoDAAC FE4417

HQ AFSOC/DOTL

Attn: MSgt Leslie Farmer 100 Bartley Street, Suite 160W Hurlburt Field, FL 32544-5273

(850) 884-2178

SECTION F FA8902-07-R-1003

Quantity of 50ea (all NVG/PNVG compatible) to DoDAAC FE4877

354 FS/OSTL

Mark For: Life Support Attn: MSgt Robin Maslow 4190 S. Phoenix Street, Bldg 480 Davis-Monthan AFB, AZ 85707-4633

Quantity of 150ea (all NVG/PNVG compatible) to DoDAAC FE4418

437 OSS/OSL

Attn: SMSgt Keith Geltz 106 East Simpson, Bldg 506 Charleston AFB, SC 29404-4719

(843) 963-4286

Quantity of 1,990ea (all NVG/PNVG compatible) to DoDAAC SW3100 Defense Distribution Depot Susquehanna PA Attn: Transportation Depot 2001 Mission Drive, Door 113-134 New Cumberland, PA 17070-5002

Full Rate Production Units are to be shipped to the address below (DoDAAC SW3100):

Defense Distribution Depot Susquehanna PA Attn: Transportation Officer 2001 Mission Drive, Door 113-134 New Cumberland, PA 17070-5002

SECTION G - CONTRACT ADMINISTRATION DATA

SECTION G FA8902-07-R-1003

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

G001 ACCOUNTING AND APPROPRIATION DATA (FEB 1997)

Accounting and appropriation data will be set forth on individual orders issued hereunder.

G017 IMPLEMENTATION OF PATENT RIGHTS CLAUSE (IDIQ) (SEP 1999)

All documents and information required by the patent rights and/or patent reporting clauses set forth in Section I of this contract shall be submitted FOR EACH ORDER to the Administrative Contracting Officer and to the patent administrator at the AFMC Law Office, Directorate of Intellectual Property, AFMCLO/JAZ, 2240 B Street, Room 100, Wright-Patterson AFB, OH 45433-7109. The AFMCLO/JAZ patent administrator can be reached at (937) 255-6111 ext 372 or DSN: 785-6111 ext 372. This notice also constitutes a request (see FAR 52.227-12(f)(10) or DFARS 252.227-7039(c), as applicable) for submission of a copy of the patent application, when filed, along with the patent application serial number, filing date, subsequent U.S. patent number and issue date, as received.

SECTION H - SPECIAL CONTRACT REQUIREMENTS

SECTION H FA8902-07-R-1003

NOTICE: The following contract clauses pertinent to this section are hereby incorporated in full text:

OTHER CONTRACT CLAUSES IN FULL TEXT

H001 OPTIONS (MAY 1997) (TAILORED)

The Government reserves the right to exercise the following option(s) subject to the stated conditions:

1001-1011, 2001-2005 and 3001-3005. In the event an option is exercised, the affected sections of the contract, e.g., Section B, Section F, Section G, etc., will be modified as appropriate.

The following price schedules shall be used to deterine the value of their respective Option CLINs should they be exercised, based upon the identification of the Government's firm requirement.

TABLES TO BE INSERTED @ TIME OF AWARD

H025 INCORPORATION OF SECTION K (OCT 1998)

Section K of the solicitation is hereby incorporated by reference.

H029 IMPLEMENTATION OF DISCLOSURE OF INFORMATION (OCT 1997)

In order to comply with DFARS 252.204-7000, Disclosure of Information, the following copies of the information to be released are required at least 45 days prior to the scheduled release date:

(a) One copy(ies) to: Office of Public Affairs, ASC/PA 1865 Fourth St., Ste 15 Wright- Patterson AFB, OH 45433-7129

(b) One copy(ies) to: Contracting Officer, 77 AESG/PSK 7980 Lindbergh Landing Brooks City-Base, TX 78235-5119

(c) One copy(ies) to: Program Manager, 648 AESS/TAAH 7980 Lindbergh Landing Brooks City-Base, TX 78235-5119.

H035 INCORPORATION OF SUBCONTRACTING PLAN (DEC 2005)

In accordance with FAR 52.219-9, Small Business Subcontracting Plan, the subcontracting plan contained in proposal #TBD @ time of award dated TBD @ time of award is incorporated herein by reference or included in Part III, Section J, as Attachment 5 to the contract.

H087 GOVERNMENT- FURNISHED PROPERTY (GFP) (FEB 2003)

Pursuant to the Government Property clause herein, the Government shall furnish the item(s) of property listed below as Government-Furnished Property (GFP) to the Contractor, f.o.b. TBD @ task order level, for use in performance of this contract. Upon completion of the contract, the Contractor shall obtain disposition instructions from the Government Property Administrator of the activity having responsibility for administration of the contract.

ITEM NR NSN NOUN PART NO QTY DELIVERY DATE

TBD @ task order level

PSK-H001 DOWN SELECT EVALUATION CRITERIA FOR MACH PRODUCTION (JUL 2007)

A. Purpose.

SECTION H FA8902-07-R-1003

This clause addresses the evaluation criteria the Government intends to use to down select to one contractor to perform the MACH production effort. The best value decision will be made based on the competitive offers received from the MACH SDD prime contractors.

B. Criteria for Evaluation.

1. The Government will down select to the contractor who provides the best overall value to the Government. In using the best value tradeoff approach, the Government intends to exercise the IOT&E/LRIP/FRP Options on contract to the SDD offeror who gives the Government the greatest confidence of meeting the requirements in the best value determination. This may result in an award being made to a higher priced offeror where the decision is consistent with the factors and the Source Selection Authority (SSA) reasonably determines that it is in the best interest of the Government. The decision will be based on an integrated assessment of the factors and subfactors listed below.

2. While the Government source selection evaluation team and the SSA will strive for maximum objectivity, the source selection process is subjective by nature and professional judgment is implicit throughout the entire process.

C. Specific Evaluation Criteria.

The Government's evaluation will be made based on an integrated assessment of the four factors and their associated subfactors listed below. Factors 1, 2, 3, and 4 are of equal importance. Subfactors 1, 2 and 3 are listed in descending order of importance.

FACTOR 1- Mission Capability Subfactor 1.1 - Product Performance Subfactor 1.2 - MACH Production Capability Subfactor 1.3 - Management

FACTOR 2 - Proposal Risk Subfactor 2.1 - Product Performance Subfactor 2.2 - MACH Production Capability Subfactor 2.3 - Management

FACTOR 3 - SDD Performance FACTOR 4 - Cost/Price

D. Importance of Cost/Price In accordance with FAR 15.304(e) - Evaluation Factors and Significant Subfactors, the evaluation factors other than cost or price, when combined, are significantly more important than cost or price; however, cost/price will contribute substantially to the selection decision.

E. Factors and Subfactors

1. FACTOR 1- Mission Capability

a. Subfactor 1.1- Product Performance The Government will evaluate the demonstrated performance of the contractor's design during Development Test and Evaluation (DT&E). This will be accomplished through Government observation of contractor testing and analysis of final contractor DT&E test reports. The Government will also evaluate the level of performance demonstrated during Government Operational Assessment (OA) on the OA Test Articles provided upon completion of SDD. This evaluation will include:

(1) Ease/repeatability of donning/doffing

(2) Pre and post flight operations

(3) In flight operations

(4) Maintenance operations

The subfactor is met when compliance with the Key Performance Parameters (KPPs), Key System Attributes (KSAs), and proposed Other System Attributes (OSAs) can either be demonstrated or supported by documented engineering analysis, technical reports, or test data. The Government will consider the benefit of product performance potential beyond the thresholds in the best value tradeoff

SECTION H FA8902-07-R-1003

determination. This assessment will be consistent with the prioritization of requirements as provided in the original solicitation's Government Performance Specification Matrix found in Section L at Attachment L-7. In general, obtaining an objective over a threshold is desired. However, the government may give more credit for attaining KSA thresholds over OSA objectives. The government may also give more credit for attaining KPP objectives over KSA objectives.

b. Subfactor 1.2 - MACH Production Capability The Government will assess the ability of the contractor's methods and processes to meet Manufacturing Development, Integrated Logistics Support (ILS) Processes, and Initial Operational Test and Evaluation (IOT&E) Support requirements.

(1) Manufacturing Development - The Government will assess the contractor's manufacturing capability to satisfactorily accomplish the tasks necessary to manufacture the MACH system. The contractor will be evaluated on manufacturing and production processes, quality management, production rate, configuration management processes for test units and production units, and hazardous material management processes.

The subfactor is met when:

(a) the contractor demonstrates that manufacturing capability and production processes exist or are obtainable to deliver the required units within the program schedule;

(b) the contractor demonstrates an effective process for ensuring production units will be free from defects in design, materials and workmanship and that required level of performance will be maintained in the field considering the technical and logistics issues of this program in accordance with the requirements set forth in Section E clause, 52.246-11, Higher Level Contract Quality Requirement;

(c) the contractor has documented and presents a plan to ensure facilities, resources, and equipment is/will be available to meet the demands to produce the required test articles and meet the anticipated production rate within the program schedule;

(d) the contractor presents evidence that the configuration management processes required to fabricate the MACH exist and/or are obtainable; and

(e) the contractor presents evidence that hazardous material management processes required to fabricate the MACH exist and/or are obtainable.

(2) ILS Processes - The contractor will be evaluated on their ILS approach, considerations of joint service logistics for the entire life cycle of the program, supporting logistics data, and initial fielding and integration plan.

The subfactor is met when:

(a) the contractor has demonstrated a sound logistics strategy;

(b) design and development decisions have addressed logistics impacts and the life cycle cost to the program;

(c) the contractor has demonstrated the capability to provide the required logistics data, including technical manuals;

(d) the contractor has demonstrated that he has an effective plan for fielding and integrating the system ensuring minimal or no loss of capability during the transition; and

(e) the contractor has demonstrated knowledge of the maintenance and support needs of the program and planned appropriately.

(3) Support of Government IOT&E - The Government will evaluate the contractor's plans for supporting all the test activities. The evaluation will include an assessment of the contractor's training processes for the Government's operators and instructors, delivery schedule of test units, failure analysis processes, and configuration control processes that support the tracking of test units.

The subfactor is met when:

(a) the contractor has documented a plan which outlines the required support and time line to ensure Government test personnel are properly trained in the operation of the MACH;

SECTION H FA8902-07-R-1003

(b) the contractor's IMP and IMS reflect effective and efficient test unit fabrication and preparation of supporting documents; and

(c) the contractor has demonstrated a thorough process for failure analysis and configuration control which provides a means of tracking test units to ensure against the possibility of compromising a test.

c. Subfactor 1.3 - Management The Government will evaluate the contractor's production phase Integrated Master Plan (IMP) and Integrated Master Schedule (IMS) to determine the ability of the contractor to meet the requirements within proposed schedule and cost. The evaluation will also consider the contractor's plans for production (to include compliance with the Berry Amendment), training, accuracy and completeness of Technical Orders (TOs).

The subfactor is met when the contractor demonstrates a sound approach to meeting production and training requirements within the proposed schedule and cost as documented in their submitted production and training plans, Design to Cost reports, IMP and IMS. The contractor's TOs must demonstrate compatibility with engineering source materials, accuracy of descriptive data, TO content, style and format are in accordance with applicable specifications and other contractual requirements.

2. FACTOR 2 - Proposal Risk Each subfactor under the Mission Capability factor will also be a subfactor under the Proposal Risk factor.

Proposal risk assessment focuses on the risks and weaknesses associated with a contractor's proposed approach and includes an assessment of the potential for disruption of schedule, increased cost, degradation of performance, and the need for increased Government oversight, as well as the likelihood of unsuccessful contract performance. For each identified risk, the assessment also addresses the contractor's proposal for mitigating the risk and why that approach is or is not manageable.

3. FACTOR 3 - SDD Performance The Government will evaluate (1) the contractor's responsiveness to the Government in supporting programmatic and technical issues, (2) the contractor's ability to manage the program within cost and on schedule in accordance with the IMP and IMS, (3) timeliness and accuracy of data submittals, and (4) the contractor's demonstrated ability to successfully perform as proposed.

4. FACTOR 4 - Cost/Price The contract options include Fixed Price Incentive line items, therefore price analysis will be conducted as mandated by FAR 15.404-1 in this cost/price evaluation. Price analysis is the process of examining and evaluating a proposed price without evaluating its separate cost elements and proposed profit. The Government may use various price analysis techniques and procedures to ensure a fair and reasonable price, given the circumstances surrounding the acquisition.

a. Contractors will provide as part of their cost/price proposal either a FFP or FPIF unit price with price adjustment formulas for the IOT&E, LRIP and FRP Option CLINs in accordance with Section I clause, 52.216-17 Incentive Price Revision - Successive Targets. The government will perform price analysis to determine the reasonableness of the proposed prices.

b. The contractor's cost/price proposal will be evaluated by total price for IOT&E, LRIP and FRP (with consideration given to Ceiling Price and Profit Adjustment Formulas) in the best value determination.

PSK-H002 ELECTRONIC DATA EXCHANGE (MAY 2007)

In order to embrace acquisition reform, a primary initiative of this contract is to minimize the amount of hardcopy deliverable data. Further, the Government is embracing the concept of insight into program status rather than the traditional oversight. In that the Government has minimized the requirement for hardcopy deliverable data and technical information, the Government shall require on-line access to

SECTION H FA8902-07-R-1003

contractor-generated data to gain and maintain the desired insight of program activities. This includes data generated and used by the contractor to manage the program. The contractor shall provide and implement a cost effective, mutually agreed upon, electronic data exchange capability between his activity and the Government program office. The contractor's electronic data exchange capability shall:

a. provide on-line electronic delivery of CDRL submittals in accordance with the CDRL preface requirements,

b. establish electronic mail and scheduling between the contractor and the Government program office team members

c. be compatible with the following Government program office formats or provide a cost-effective and low risk solution to support the contractor's proposed alternatives:

(1) Microsoft Word 2003 - Microsoft Office 95,

(2) Charts, tables, graphics, etc., shall be embedded in the file utilizing formats compatible with

Excel - Microsoft Office 95, Microsoft Project 2002 or Power Point Microsoft Office 95.

PART II - CONTRACT CLAUSES

SECTION I - CONTRACT CLAUSES

SECTION I FA8902-07-R-1003

Contract Clauses in this section are from the FAR, Defense FAR Sup, Air Force FAR Sup, and the Air Force Materiel Command FAR Sup, and are current through the following updates:

Database_Version: 6.9.x.300; Issued: 7/17/2007; FAR: FAC 2005-18; DFAR: DCN20070531; DL.: DL 98- 021; Class Deviations: CD 2005o0001; AFFAR: 2002 Edition; AFMCFAR: AFMCAC 06-01;

AFAC: AFAC 2007-0531; IPN: 98-009

I. NOTICE: The following contract clauses pertinent to this section are hereby incorporated by reference:

A. FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES

52.202-01 DEFINITIONS (JUL 2004)

52.203-03 GRATUITIES (APR 1984)

52.203-05 COVENANT AGAINST CONTINGENT FEES (APR 1984)

52.203-06 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

52.203-07 ANTI-KICKBACK PROCEDURES (JUL 1995)

52.203-08 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (JAN 1997)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (JAN 1997)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(SEP 2005)

52.204-04 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (AUG 2000)

52.204-07 CENTRAL CONTRACTOR REGISTRATION (JUL 2006)

52.209-06 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(SEP 2006)

52.211-05 MATERIAL REQUIREMENTS (AUG 2000)

52.215-02 AUDIT AND RECORDS -- NEGOTIATION (JUN 1999)

52.215-08 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

52.215-11 PRICE REDUCTION FOR DEFECTIVE COST OR PRICING DATA--MODIFICATIONS

(OCT 1997)

52.215-13 SUBCONTRACTOR COST OR PRICING DATA--MODIFICATIONS (OCT 1997)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 1997)

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

52.215-21 REQUIREMENTS FOR COST OR PRICING DATA OR INFORMATION OTHER THAN

COST OR PRICING DATA--MODIFICATIONS (OCT 1997)

52.215-21 REQUIREMENTS FOR COST OR PRICING DATA OR INFORMATION OTHER THAN

COST OR PRICING DATA--MODIFICATIONS (OCT 1997) - ALTERNATE II (OCT 1997)

52.215-21 REQUIREMENTS FOR COST OR PRICING DATA OR INFORMATION OTHER THAN

COST OR PRICING DATA--MODIFICATIONS (OCT 1997) - ALTERNATE III (OCT

1997) Alt III, Para (c), Submit the cost portion of the proposal via the following electronic media:

'Microsoft Excel'

52.215-21 REQUIREMENTS FOR COST OR PRICING DATA OR INFORMATION OTHER THAN

COST OR PRICING DATA--MODIFICATIONS (OCT 1997) - ALTERNATE IV (OCT

1997) Alt IV, (a), Description of the information and the format that are required: 'Information other than cost or pricing data is required as described in FAR 15.403-3.'

52.216-16 INCENTIVE PRICE REVISION -- FIRM TARGET (OCT 1997)

Para (a), Line Item numbers: '0001, 1001, 1002, 1003, 1004, 1005, 1006, and 1007' Para (a), In no event shall the total final price of these items exceed the ceiling price of:

'TBD @ time of award' Para (c)(1), Number of days: '30'

SECTION I FA8902-07-R-1003

Para (d)(2)(ii), Percent: 'TBD @ time of award' Para (d)(2)(iii), Percent: 'TBD @ time of award' Applies to Fixed-Price Incentive (Firm Target) CLIN(s) only.

52.216-16 INCENTIVE PRICE REVISION -- FIRM TARGET (OCT 1997) - ALTERNATE I (APR

1984) Para (a), Line Item numbers '0001, 1001, 1002, 1003, 1004, 1005, 1006, and 1007' Para (a), In no event shall the total final price of these items exceed the ceiling price of:

'TBD @ time of award' Para (c)(1), Number of days: '30' Para (d)(2)(ii), Percent: 'TBD @ time of award' Para (d)(2)(iii), Percent: 'TBD @ time of award'

52.216-17 INCENTIVE PRICE REVISION -- SUCCESSIVE TARGETS (OCT 1997)

Para (a) Line Item numbers '1008, 1009, 2001, 2002, 2003, 2004, 3001, 3002, 3003 and 3004' Para (a) Ceiling Price 'TBD @ time of award' Para (a) Initial Target Profit 'TBD @ time of award' Para (c)(1) Number of Days '30' Para (c)(1) Degree of completion 'the Systems Verification Review (SVR) for CLINs 1008 and 1009 and the Physical Configuration Audit (PCA) for the remaining FPIS CLINs' Para (d)(2) Initial target increased/decreased by 'TBD @ time of award' Para (d)(2) In no event shall total firm target be less than 'TBD @ time of award' Para (d)(2) In no event shall total firm target be more than 'TBD @ time of award' Para (d)(4)(ii) Percent 'TBD @ time of award' Para (d)(4)(iii) Percent 'TBD @ time of award' Para (e) Number of days '30' Applies to Fixed-Price Incentive (Successive Targets) CLIN(s) only.

52.216-17 INCENTIVE PRICE REVISION -- SUCCESSIVE TARGETS (OCT 1997) - ALTERNATE I

(APR 1984)

Para (a) Line Item numbers '1008, 1009, 2001, 2002, 2003, 2004, 3001, 3002, 3003 and 3004' Para (a) Ceiling Price 'TBD @ time of award' Para (a) Initial Target Profit 'TBD @ time of award' Para (c)(1) Number of Days '30' Para (c)(1) Degree of…