FA8620-15-R-4005-01.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

See Block #2

PAGE OF PAGES

2. AMENDMENT/MODIFICATION NO.

3. EFFECTIVE DATE

12 MAY 2015

4. REQUISITION/PURCHASE REQ.NO.

5. PROJECT NO. (If applicable)

6. ISSUED BY AFLCMC/WIIK CODE FA8620 7. ADMINISTERED BY (If other than Item 6) CODE

USAF/AFMC/AFLCMC

AF LIFE CYCLE MANAGEMENT CENTER

2530 LOOP ROAD WEST, ROOM 144

WRIGHT-PATTERSON AFB OH 45433-7101

STEPHANIE N. SANCHEZ 937-2554192

stephanie.sanchez.5@us.af.mil

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

FA8620-15-R-4005

X

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, X is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATION OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(X )

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: ( ) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. ITEM

10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

CHANGES TO BLOCK 12 of SF33:

In compliance with the above, the undersigned agrees, if this offer is accepted within 180 calendar days from the date of receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

See Schedule of Changes for detailed list.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print).

16A. NAME AND TITLE OF SIGNER (Type or print)

JOHN A. PURCELL

15B. CONTRACTOR/OFFEROR

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

16C. DATE SIGNED

(Signature of person authorized to sign)

BY________________________________________

(Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV.10-83)

PREVIOUS EDITION UNUSABLE Prescribed by GSA ConWrite Version 6.14.5 FAR (48 CFR) 53.243 Created 12 May 2015 2:16 PM

SCHEDULE OF CHANGES

FA8620-15-R-4005 0001

a

Changes incorporated on this modification:

1. Block 12 of SF33 was modified from 60 days to 180 days.

2. CLIN 0001, 0002, 0003's period of performance was updated to 1 January 2016 to 31 December

2016.

3. CLIN 0006's period of performance was updated to 1 December 2015 to 31 December 2015.

4. Section I, FAR 52.222-42 Statement of Equivalent Rates for Federal Hires (May 2014) was updated to include Employee Class, Grade Series, and Monetary Wage.

5. Attachment 1, Performance Work Statement, MQ-1/9 Production Acceptance and

Developmental Test Services, dated 12 May 15 was updated to include the correct period of performance dates.

6. Attachment 2, Section L- Instructions, Conditions, and Notices to Offerors has been updated to include delivery schedule, increase page limit to price and contract documentation volumes, and allow for 10 point font on tables, charts, graphs and figures.

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0001 CLIN Change __________ Noun: PRODUCTION ACCEPTANCE AND TEST SERVICES Total Item Amount: $0.00

PSC: H115

Contract type: J - FIRM FIXED PRICE Start Date: 01 JAN 2016 Completion Date: 31 DEC 2016 Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

Anticipated Payment Schedule:

Twelve (12) monthly payments

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0002 CLIN Change __________ Noun: DEVELOPMENTAL TEST SERVICE Total Item Amount: $0.00

PSC: H115

Contract type: J - FIRM FIXED PRICE Start Date: 01 JAN 2016 Completion Date: 31 DEC 2016 Descriptive Data:

The contractor shall provide Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

0003 CLIN Change __________ Noun: TRAVEL Total Item Amount: $0.00

PSC: H115

Contract type: J - FIRM FIXED PRICE Start Date: 01 JAN 2016 Completion Date: 31 DEC 2016 Descriptive Data:

Travel shall be conducted in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services.", dated 12 May 15.

Travel expenses shall not exceed the limits established in the Joint Travel Regulation and no profit/fee is authorized. The contractor shall submit a request for travel in writing to the Procurement Contracting Officer (PCO) at least 15 days prior to the date of travel. Funding must be obligated on this CLIN and the PCO must give written authorization prior to incurring any obligation.

Not to Exceed (NTE) amount of $30,000.

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

0004 OPTION CLIN (service) __________

Noun: SURGE OPERATIONS

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services.", Para 3.1.5 dated 12 May 15.

Contractors shall price this on a per month basis. This Option may be exercised up to 12 times, but shall not exceed the duration of the period of performance.

0005 OPTION CLIN (service) __________

Noun: FMS-PRODUCTION ACCEPTANCE AND TEST SERVICES

PSC: H115

Descriptive Data:

The contractor shall provide 1 Flight and 1 Ground Test for FMS Production Acceptance Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15. This CLIN may be exercised up to 12 times during the Period of Performance.

0006 CLIN Change __________ Noun: 30 DAY TRANSITION PERIOD Total Item Amount: $0.00

PSC: H115

Contract type: J - FIRM FIXED PRICE Start Date: 01 DEC 2015 Completion Date: 31 DEC 2015 Descriptive Data:

The contractor shall provide a 30-Day Transition period in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

1001 OPTION CLIN (service) __________

Noun: PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR1

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1002 OPTION CLIN (service) __________

Noun: DEVELOPMENTAL TEST SERVICE-OPTION YR1

PSC: H115

Descriptive Data:

The contractor shall provide Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

1003 OPTION CLIN (service) __________

Noun: TRAVEL - YR1

PSC: H115

Descriptive Data:

Travel shall be conducted in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services.", dated 12 May 15.

Travel expenses shall not exceed the limits established in the Joint Travel Regulation and no profit/fee is authorized. The contractor shall submit a request for travel in writing to the Procurement Contracting Officer (PCO) at least 15 days prior to the date of travel. Funding must be obligated on this CLIN and the PCO

1004 OPTION CLIN (service) __________

Noun: SURGE OPERATIONS-OPTION YR1

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement

(PWS), MQ1/9 Production Acceptance and Developmental Test Services.", Para

3.1.5 dated 12 May 15. Contractors shall price this on a per month basis. This

Option may be exercised up to 12 times, but shall not exceed the duration of the period of performance.

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

1005 OPTION CLIN (service) __________

Noun: FMS-PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR1

PSC: H115

Descriptive Data:

The contractor shall provide 1 Flight and 1 Ground Test for FMS Production

Acceptance Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production

Acceptance and Developmental Test Services," dated 12 May 15. This CLIN may be exercised up to 12 times during the period of performance.

2001 OPTION CLIN (service) __________

Noun: PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR2

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

2002 OPTION CLIN (service) __________

Noun: DEVELOPMENTAL TEST SERVICE-OPTION YR2

PSC: H115

Descriptive Data:

The contractor shall provide Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

2003 OPTION CLIN (service) __________

Noun: TRAVEL-OPTION YR2

PSC: H115

Descriptive Data:

Travel shall be conducted in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services.", dated 12 May 15.

Travel expenses shall not exceed the limits established in the Joint Travel Regulation and no profit/fee is authorized. The contractor shall submit a request for travel in writing to the Procurement Contracting Officer (PCO) at least 15 days prior to the date of travel.

Funding must be obligated on this CLIN and the PCO must give written authorization prior to incurring any obligation.

2004 OPTION CLIN (service) __________

Noun: SURGE OPERATIONS-OPTION YR2

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement

(PWS), MQ1/9 Production Acceptance and Developmental Test Services.", Para

3.1.5 dated 12 May 15. Contractors shall price this on a per month basis. This option can be exercised up to 12 times, but shall not exceed the duration of the period of performance.

2005 OPTION CLIN (service) __________

Noun: FMS-PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR2

PSC: H115

Descriptive Data:

The contractor shall provide 1 Flight and 1 Ground Test for FMS Production

Acceptance Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

3001 OPTION CLIN (service) __________

Noun: PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR3

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

3002 OPTION CLIN (service) __________

Noun: DEVELOPMENTAL TEST SERVICE-OPTION YR3

PSC: H115

Descriptive Data:

The contractor shall provide Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services," dated 12 May 15.

3003 OPTION CLIN (service) __________

Noun: TRAVEL-OPTION YR3

PSC: H115

Descriptive Data:

Travel shall be conducted in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production Acceptance and Developmental Test Services.", dated 12 May 15.

Travel expenses shall not exceed the limits established in the Joint Travel Regulation and no profit/fee is authorized. The contractor shall submit a request for travel in writing to the Procurement Contracting Officer (PCO) at least 15 days prior to the date of travel. Funding must be obligated on this CLIN and the PCO

Qty Unit Price ITEM SUPPLIES OR SERVICES Purch Unit Total Item Amount

3004 OPTION CLIN (service) __________

Noun: SURGE OPERATIONS-OPTION YR3

PSC: H115

Descriptive Data:

The contractor shall provide Production Acceptance and Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement

(PWS), MQ1/9 Production Acceptance and Developmental Test Services.", Para

3.1.5 dated 12 May 15. Contractors shall price this on a per month basis. This

Option may be exercised up to 12 times, but shall not exceed the duration of the period of performance.

3005 OPTION CLIN (service) __________

Noun: FMS-PRODUCTION ACCEPTANCE AND TEST SERVICES-

OPTION YR3

PSC: H115

Descriptive Data:

The contractor shall provide 1 Flight and 1 Ground Test for FMS Production

Acceptance Developmental Test Services in accordance with Section J, Attachment 1 entitled, "Performance Work Statement (PWS), MQ1/9 Production

The following clauses are changed in Section I:

FAR 52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (May 2014) In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

THIS STATEMENT IS FOR INFORMATION ONLY: IT IS NOT A

WAGE DETERMINATION

Employee Class Monetary Wage MQ-1/9 Pilot GS-12 $37.46 MQ-1/9 Sensor Operator GS-09 $25.83 Scheduler GS-07-09 $21.12 - $25.83 Admin Personnel GS-07 $21.12

<end of clause>

LIST OF ATTACHMENTS

DOCUMENT PGS DATE TITLE

ATTACHMENT 1 47 12 MAY 2015 PERFORMANCE WORK STATEMENT (PWS) MQ-

1/9 PRODUCTION ACCEPTANCE AND

DEVELOPMENTAL TEST SERVICES, DATED 12

MAY 15

ATTACHMENT 2 32 12 MAY 2015 SECTION L- INSTRUCTIONS, CONDITIONS, AND

NOTICES TO OFFERORS

Hah

Performance Work Statement (PWS)

MQ-1/9 Production Acceptance and

Developmental Test Services

5/12/2015

Version 15

Vision Statement

1 Introduction

1.1 Mission

1.2 Background

1.3 Scope

2 General Requirements

2.1 Non-Personal Services

2.2 Business Relations

2.3 Contract Administration and Management

2.3.1 Contract Management

2.3.2 Contract Administration

2.3.3 Personnel Administration

2.4 Subcontract Management

2.5 Contractor Personnel, Disciplines, and Specialties

2.6 Location and Hours of Work

2.7 Travel / Temporary Duty (TDY)

3 Performance Requirements

3.1 Perform Developmental Test and Evaluation for MQ-1/9 Unmanned Aerial System

3.2 Perform Production Acceptance Ground and Flight Testing for MQ-1/9 Unmanned

Aerial System

3.3 Provide Unit-level Support for AFLCMC Det 3 OL

3.4 Accomplish Contract Administration for MQ-1/9 Production Acceptance and

Developmental Test Support Contract

4 Special Requirements

4.1 Security and Safety

4.1.1 Security

4.1.2 Safety

4.2 Transition

4.3 Government Furnished Flight Equipment

4.4 Environmental Requirements

4.5 Applicable Directives

4.6 Quality

4.6.1 Quality Control

4.6.2 Quality Assurance Surveillance Plan (QASP)

5 Deliverables and Work Products/Artifacts

5.1 Work Products/Artifacts

5.2 Deliverables

6 Related Documents

Performance Work Statement (PWS)

MQ-1/9 Production Acceptance and Developmental Test

Services

Vision Statement

Provide Production Acceptance and Developmental Test aircrew and Unit Level support personnel to support ground and flight testing at AFLCMC/WII DET 3 OL. Unit Level support functions include Flight Manual Management, Squadron Aviation Resource Management

System (SARMS) Operations Administration, Standards/Evaluation Management, and Aircrew

Scheduling.

1 Introduction

AFLCMC/WII is comprised of the MQ-1 and MQ-9 aircraft, GCS, and support equipment that has been specially configured to meet mission requirements of Air Combat Command (ACC), US Special Operations Command (USSOCOM), Air Force Special Operations Command

(AFSOC), and Foreign Military Sales (FMS). This Unmanned Aerial System (UAS) is employed around the globe and works in a range of environments from established bases to austere runways. The MQ-1/9 program develops cutting-edge equipment to meet the emerging requirements of ACC, USSOCOM, AFSOC, FMS and various other government agencies.

1.1 Mission

AFLCMC Det 3 OL is located in the Mojave Desert in southern California at a remote airfield devoted to Remotely Piloted Aircraft (RPA) Production Acceptance and Developmental testing in support of AFLCMC/WII at Wright Patterson Air Force Base, OH. The Program Office provides engineering services, program management, logistics support, and test oversight for various UAS customers. The acquired services outlined in this PWS are necessary to ensure maximum program responsiveness and flexibility for missions requiring rapid upgrades to existing or new weapon systems for an array of operational needs.

1.2 Background

The Production Acceptance and Developmental Test Support Services are currently being performed under a Big Safari Sole Source services contract which is executing its last option year in CY15. This contract effort is a new requirement. The Period of Performance (POP) will consist of 30-DayTransition Period, 1 December 2015 to 31 December 2015, Base Year, 1

January 2016 to 31 December 2016, Option Year 1, 1 January 2017 to 31 December 2017, Option Year 2, 1 January 2018 to 31 December 2018, and Option Year 3, 1 January 2019 to 31

December 2019.

This new contract effort is to obtain the services of MQ-1/9 Pilots, Test Pilots, and Sensor

Operators (aircrew) to get the best value test support for the United States Air Force. The contract period of performance (POP) will be for 30-day transition period, 1 year base, and 3 option years. In addition to providing aircrew, the Contractor shall provide MQ-9 Flight Manual

Program support, Squadron Aviation Resource Management (SARM) Operations

Administration, Standards/Evaluation support, and Flight Scheduling support.

1.3 Scope

Program work under this PWS will require coordination and interaction with USAF project managers, prime contractors, subcontractors, and concerned United States Government agencies. All contracts relating to any project being supported under this PWS between contractor support personnel and other involved organizations will be approved in advance by the specific USAF or Government Program project management staff being supported.

2 General Requirements

The places of performance include: Primary: Mojave Desert Flight Test Facility, CA and China

Lake NAS, CA. Alternate or off-site locations: General Atomics Aeronautical Systems

Incorporated Division, Poway CA; Creech AFB, NV; Nellis AFB, NV; and Edwards AFB, CA.

The period of performance shall be 12 months from date of award with three (3) additional 12-month option periods. Each period of performance award will include the baseline contract to support normal operations tempo and a surge operation to support an increased tempo.

Baseline contract: Requires enough aircrew and unit support personnel to execute, on average, three (3) four (4)-hour sorties (flights) and three (3) four (4)-hour ground test events per day, five

(5) days per week given the AFI11-202 Volume 3 12-hour crew rest and duty day limitations.

Temporary increases in operations tempo to a maximum of five (5) four (4)-hour sorties and four

(4) four (4)-hour ground events per day may be required due to programmatic deadlines hindered by weather or other unplanned factors. Baseline contract manning should be sufficient to support these temporary increases in operations tempo for short periods of time in order to meet schedule requirements.

Surges in operations tempo due to Joint Urgent Operational Needs (JUONs), Urgent

Operational Needs (UONs), Quick Reaction Capabilities (QRCs), or similar test efforts will require additional manning and chargeable to the Surge Operations Option Contract Line Item

(CLIN). Surge capability should account for enough manning to consistently perform at five (5) four (4)-hour flight sorties (flights) and five (5) four (4)-hour ground events per day, five (5) days per week given AFI 11-202 Volume 3 12-hour crew rest and duty day limitations.

Note: One “sortie” counter is defined as 3 to 4 hours scheduled and/or logged flight time duration. Additional flight time over 3 hours constitutes additional sorties as follows: 0-3 hours =

1 sortie (1 crew), 4-8 hours = 2 sorties (2 crews), each additional 4 hour increment over 8 hours equals an additional sortie requiring one more crew. This time does not include any preparation activities, pre-mission briefs, pre-launch/ground procedures, post flight ground checks, or debriefing. Example(s): Scheduled takeoff of 0700L and land of 1000L = 1 sortie. Scheduled takeoff of 0700L and land of 1200L = 2 sorties. A ground test can also be counted as a sortie under certain conditions i.e. if engine runs are required, or pilot and sensor operator specific checklists and tasks need to be accomplished as build up to a flight event.

All contractor pilots are required to be FAA Licensed Commercial Pilots with Instrument ratings in addition to being current and qualified on the MQ-1/9 Unmanned Aerial System.

Developmental Test Pilots shall be graduates of a formal Test Pilot School.

Due to the complexity of the UAS Flight Manuals, the Flight Manual Managers shall possess prior MQ-1 or MQ-9 (or both) Pilot or Sensor Operator qualifications with Instructor and Test &

Evaluation experience in addition to experience working with Air Force Technical Orders 00-5-1 and 00-5-3; and familiarity with MIL-DTL-7700.

Production Acceptance Testing for Foreign Military Sales (FMS) customers may be necessary.

FMS Testing will only be for Production and Acceptance Testing.

2.1 Non-Personal Services

The Government shall neither supervise contractor employees nor control the method by which the contractor performs the required tasks. Under no circumstances shall the Government assign tasks to, or prepare work schedules for, individual contractor employees. It shall be the responsibility of the Contractor to manage its employees and to guard against any actions that are of the nature of personal services, or give the perception of personal services. If the

Contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the Contractor's responsibility to notify the Procuring Contracting Officer (PCO) immediately.

2.2 Business Relations

The Contractor shall successfully integrate and coordinate all activity needed to execute the requirement. The Contractor shall manage the timeliness, completeness, and quality of problem identification. The Contractor shall provide corrective action plans, proposal submittals, timely identification of issues, and effective management of subcontractors. The Contractor shall seek to ensure customer satisfaction and professional and ethical behavior of all contractor personnel.

2.3 Contract Administration and Management

The following subsections specify requirements for contract, management, and personnel administration.

2.3.1 Contract Management

The Contractor shall establish clear organizational lines of authority and responsibility to ensure effective management of the resources assigned to the requirement. The Contractor must maintain continuity between the support operations at AFLCMC Det 3 OL and the Contractor's corporate offices.

2.3.2 Contract Administration

The Contractor shall establish processes and assign appropriate resources to effectively administer the requirement. The Contractor shall respond to Government requests for contractual actions in a timely fashion. The Contractor shall have a single point of contact between the Government and contractor personnel assigned to support contracts or task orders. The Contractor shall assign work effort and maintain proper and accurate time keeping records of personnel assigned to work on the requirement.

2.3.3 Personnel Administration

The Contractor shall provide the following management and support as required: The

Contractor shall provide for employees during designated Government non-work days or other periods where Government offices are closed due to weather or security conditions. The

Contractor shall maintain the currency of their employees by providing initial and refresher training as required to meet the PWS requirements. The Contractor shall make necessary travel arrangements for employees. The Contractor shall provide necessary infrastructure to support contract tasks at offsite locations as mentioned above and necessary to support AFLCMC Det 3

OL. The Contractor shall provide administrative support to employees in a timely fashion (time keeping, leave processing, pay, emergency needs).

2.4 Subcontract Management

The Contractor shall be responsible for any subcontract management necessary to integrate work performed on this requirement and shall be responsible and accountable for subcontractor performance on this requirement. The prime Contractor will manage work distribution to ensure there are no Organizational Conflict of Interest (OCI) considerations. Contractors may add subcontractors to their team after notification to the Contracting Officer (CO), Contracting Officer

Representative (COR) and Program Manager (PM).

2.5 Contractor Personnel, Disciplines, and Specialties

The Contractor shall accomplish the assigned work by employing and utilizing qualified personnel with appropriate combinations of certifications, education, training, and experience.

The Contractor shall match personnel skills to the work or task with a minimum of under/over employment of resources. The Contractor shall ensure the labor categories as defined in the standard Labor Categories document, labor rates, and man-hours utilized in the performance of each PWS line item issued hereunder will be the minimum necessary to accomplish the task.

Estimate of nominal labor hours by labor category:

a) MQ-1/9 Aircrew (Pilots, Sensor Operators, Test Pilots): 40 Hours per week

b) Unit Level Support (Scheduler, Ops Admin, Flight Manual Managers): 40 Hours per week

The Contractor shall provide the necessary resources and infrastructure to manage, perform, and administer the contract.

Contractor personnel will ensure they always identify themselves as such by prominently wearing contractor badges above the waist, verbally when on the phone, on their cubicle/office nameplates, and in their email signature block.

2.6 Location and Hours of Work

Accomplishment of the results contained in this PWS requires work at AFLCMC Det 3 OL in the

Mojave Desert in San Bernardino County, CA. Normal workdays are Monday through Friday except US Federal Holidays which include:

1. New Year's Day, 1 Jan

2. Martin Luther King Day, 3rd Mon in Jan

3. President's Day, 3rd Mon in Feb

4. Memorial Day, Last Mon in May

5. Independence Day, 4 Jul

6. Labor Day, 1st Mon in Sep

7. Columbus Day, 2nd Mon in Oct

8. Veteran's Day, 11 Nov

9. Thanksgiving Day, 4th Thu in Nov

10. Christmas Day, 25 Dec

Aircrew (Pilots and Sensor Operators) may be required to fly sorties at all hours depending on scheduled test mission requirements. Aircrew flight duty days will be based upon AFI11-202

Volume 3 12-hour crew rest and duty day limitations. When not on the flying schedule, contractor aircrew shall adhere to the normal core hours of work as described below.

Workers typically work a “9/80” schedule, that is nine (9) nine (9)-hour days in a two (2) week period for a total of 80 hours. Flextime workers start not earlier than 0700 and not later than

0800. Core hours of work are from 0800 to 1600 daily. All employees (with exception of aircrew on flight schedule) are expected to be available during core hours.

Temporary increases in operations tempo to meet programmatic timelines due to unforeseen delays (weather, maintenance, technical issues, etc.) should be absorbed by the current contractor aircrew foregoing additional duties or training opportunities. These short duration (up to six (6) months) increases in operations tempo may require extended (up to 10 hours) days for certain contractor personnel.

Indefinite surge operations to support Quick Reaction Capability (QRC) or Joint Urgent

Operational Need (JUON) efforts may require additional contractor aircrew/support personnel to support increases in operations tempo (six (6) months or longer). The additional contractor personnel to support indefinite surge operations will be charged to the Surge Option CLIN.

2.7 Travel / Temporary Duty (TDY)

Travel to other government facilities or other contractor facilities may be required to support the contracted effort. All travel requirements (including plans, agenda, itinerary, or dates) shall be pre-approved by the Government (subject to local policy procedures), and is on a strictly cost reimbursable basis. Costs for travel shall be billed in accordance with the regulatory implementation of Public Law 99-234 and FAR 31.205-46 Travel Costs (subject to local policy & procedures; may reference FAR).

3 Performance Requirements

The requirements for this contract are broken down into the following four general objectives:

I. Perform Developmental Test and Evaluation of the MQ-1/9 UAS

II. Perform Production Acceptance Ground and Flight Testing for MQ-1/9 UAS

III. Provide Unit Level Support

IV. Contract Administration

3.1 Perform Developmental Test and Evaluation for MQ-1/9 Unmanned

Aerial System.

3.1.1 The Contractor shall conduct Developmental Testing with MQ-1/9 Pilots with a minimum of 200 Remotely Piloted Aircraft (RPA) Flight Hours and an FAA

Commercial/Instrument Pilots' licenses.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 90% of Contractor Pilots meet minimum qualifications

b) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Pilots meet minimum qualifications

c) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Pilots meet minimum qualifications

d) STD: Compliant with AFI 10-220 IP AFMC Sup, Contractor's Flight and Ground Operations, 6

Nov 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

e) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Pilots meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W04 Weekly Training Review Briefing

W05 Evaluation Management Tracker (MS Access)

W06 Letter of Certifications

W07 Flight Evaluation Folder (FEF)

3.1.2 The Contractor shall conduct Test-Pilot-Required Developmental Testing with MQ-1/9 Test Pilots which have graduated from a formal Test Pilot School and possess MQ-1/9 qualifications and FAA Commercial/Instrument Pilot's licenses.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFI 99-107, Test Pilot School, 17 Jan 2013

AQL: Contractor Test Pilots remain in 90% compliance

b) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 90% of Contractor Pilots meet minimum qualifications

c) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Pilots meet minimum qualifications

d) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Pilots meet minimum qualifications

e) STD: Compliant with AFI 10-220 IP AFMC Sup, Contractor's Flight and Ground Operations, 6

Nov 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

f) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Pilots meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W05 Evaluation Management Tracker (MS Access)

W08 Flight Authorization Orders (Form 4327a)

3.1.3 The Contractor shall conduct Developmental Testing with current and qualified MQ-1/9 Sensor Operators with minimum 200 RPA Flight Hours.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Aircrew meet minimum qualifications

b) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Aircrew meet minimum qualifications

c) STD: Compliant with AFI 10-220 IP AFMC Sup, Contractor's Flight and Ground Operations, 6

Nov 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

d) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W06 Letter of Certifications

3.1.4 The Contractor shall provide sufficient current and qualified aircrew for three (3) four-hour sorties and three (3) four-hour ground test events per day.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Complete 50% of Scheduled Test Events per AFLCMC Det 3 OL Weekly Schedule

AQL: >=50% of Scheduled events

Work Artifacts

W03 Flight and Ground Event Schedule

3.1.5 The Contractor shall provide sufficient current and qualified aircrew for surge operations to five (5) four-hour sorties and five (4) four-hour ground test events per day five (5) days a week, for an indefinite period.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Complete 50% of Scheduled Test Events per AFLCMC Det 3 OL Weekly Schedule

AQL: >=50% of Scheduled events

Work Artifacts

W04 Weekly Training Review Briefing

3.1.6 The Contractor shall complete Developmental Test Documentation for MQ-

1/9 Developmental ground and flight test events.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFFTC-TIH-88-002, Writing AFFTC Technical Reports

AQL: Provide comments for Quick Looks to Flight Test Engineer within 48 Hours

b) STD: Compliant with AFFTC-TIH-93-01, Air Force Flight Test Center (AFFTC) Test Plan

Preparation Guide

AQL: 95% Administrative or Omission Error Free

Work Artifacts

W02 Developmental Test Documentation

W21 Feedback on Test Cards

3.1.7 The Contractor shall conduct and participate in Technical Review Boards

(TRBs), Safety Review Boards (SRBs), and Flight Test Readiness Reviews

(FTRRs) for Developmental Test and Evaluation of MQ-1/9 UAS.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AACI91-201, AAC Test Safety and Review Process, 7 Mar 2011 or latest

AQL: 95% Administrative or Omission Error Free

b) STD: Compliant with AFFTCI91-105, AFFTC Test Safety Review Process, 25 Jul 2012 or latest

AQL: 95% Administrative or Omission Error Free

c) STD: Compliant with AFFTCI99-105, Test Control and Conduct, 1 Dec 2009 or latest

d) STD: Compliant with AFFTC-TIH-88-002, Writing AFFTC Technical Reports

AQL: 95% Administrative or Omission Error Free

e) STD: Compliant with AFFTC-TIH-93-01, Air Force Flight Test Center (AFFTC) Test Plan

Preparation Guide

AQL: 95% Administrative or Omission Error Free

f) STD: Compliant with AFI91-202, AFMC Sup 1, Chapter 13, Test and Safety Review Process, 9 Jul 2013 or latest

AQL: 95% Administrative or Omission Error Free

g) STD: Compliant with AFI99-103, Capabilities Based Test and Evaluation, 16 Oct 2013 or latest

AQL: 95% Administrative or Omission Error Free

Work Artifacts

W09 Feedback ATP Test Plans

3.1.8 The Contractor shall review Test Cards for all MQ-1/9 Test Events (ground and flight).

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AACI91-201, AAC Test Safety and Review Process, 7 Mar 2011 or latest

AQL: 95% Administrative or Omission Error Free

b) STD: Compliant with AFFTCI91-105, AFFTC Test Safety Review Process, 25 Jul 2012 or latest

AQL: 95% Administrative or Omission Error Free

c) STD: Compliant with AFFTCI99-105, Test Control and Conduct, 1 Dec 2009 or latest

AQL: 95% Administrative or Omission Error Free

d) STD: Compliant with AFFTC-TIH-88-002, Writing AFFTC Technical Reports

e) STD: Compliant with AFFTC-TIH-93-01, Air Force Flight Test Center (AFFTC) Test Plan

Preparation Guide

AQL: 95% Administrative or Omission Error Free

f) STD: Compliant with AFI91-202, AFMC Sup 1, Chapter 13, Test and Safety Review Process, 9 Jul 2013 or latest

AQL: 95% Administrative or Omission Error Free

g) STD: Compliant with AFI99-103, Capabilities Based Test and Evaluation, 16 Oct 2013 or latest

AQL: 95% Administrative or Omission Error Free

3.1.9 The Contractor shall conduct training for MQ-1/9 Test Aircrew.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

b) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Aircrew meet minimum qualifications

c) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Aircrew meet minimum qualifications

W20 MQ-1/9 Aircrew Training Materials

3.2 Perform Production Acceptance Ground and Flight Testing for MQ-1/9

Unmanned Aerial System.

3.2.1 The Contractor shall provide Production Acceptance Ground and Flight

Testing with MQ-1/9 Pilots with minimum 200 RPA Flight Hours and FAA

Commercial/instrument Pilot’s licenses.

a) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 90% of Contractor Pilots meet minimum qualifications

b) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Pilots meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W06 Letter of Certifications

3.2.2 The Contractor shall conduct Acceptance Test Procedure (ATP) ground and flight test events with current and qualified MQ-1/9 Sensor Operators with minimum 200 RPA Flight Hours.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 90% of Contractor Aircrew meet minimum qualifications

b) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Aircrew meet minimum qualifications

c) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Aircrew meet minimum qualifications

d) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W04 Weekly Training Review Briefing

W05 Evaluation Management Tracker (MS Access)

3.2.3 The Contractor shall review Acceptance Test Procedure (ATP)

Documentation for MQ-1/9 ATP ground and flight test events.

a) STD: Compliant with ATP Test Plans and Procedures

AQL: 95% Administrative or Omission Error Free

b) STD: Compliant with AFPD99-1, Test and Evaluation Process, 3 Jun 2014 or latest

AQL: No more than 3 omissions/errors per quarter

c) STD: Compliant with AFI99-103, Capabilities Based Test and Evaluation, 16 Oct 2013 or latest

AQL: No more than 3 omissions/errors per quarter

d) STD: Compliant with AFMCI99-103, Test Management Process, 22 Nov 2004 or latest version

AQL: No more than 3 omissions/errors per quarter

e) STD: Compliant with AFI91-202, AFMC Sup 1, Chapter 13, Test and Safety Review Process, 9 Jul 2013 or latest

AQL: No more than 3 omissions/errors per quarter

f) STD: Compliant with AFMCPD99-1, Test Management and Policy, 4 Nov 2004 or latest

AQL: No more than 3 omissions/errors per quarter

g) STD: Compliant with AFFTCI99-105, Test Control and Conduct, 1 Dec 2009 or latest

AQL: No more than 3 omissions/errors per quarter

h) STD: Compliant with AACI91-201, AAC Test Safety and Review Process, 7 Mar 2011 or latest

AQL: No more than 3 omissions/errors per quarter

i) STD: Compliant with AFFTC-TIH-93-01, Air Force Flight Test Center (AFFTC) Test Plan

Preparation Guide

AQL: 95% Administrative Error Free

j) STD: Compliant with AFFTC-TIH-88-002, Writing AFFTC Technical Reports

AQL: 95% Administrative Error Free

k) STD: Compliant with AFFTCI91-105, AFFTC Test Safety Review Process, 25 Jul 2012 or latest

AQL: No more than 3 omission/errors per quarter

W09 Feedback ATP Test Plans

3.2.4 The Contractor shall provide Functional Check Flight (FCF)-qualified MQ-1/9 aircrew with minimum 800 RPA Flight hours (each pilot and SO) for MQ-1/9

Functional Check Flights.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 90% of Contractor Pilots meet minimum qualifications

b) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Aircrew meet minimum qualifications

c) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Aircrew meet minimum qualifications

d) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

Work Artifacts

W01 ARMS Extract

W04 Weekly Training Review Briefing

W05 Evaluation Management Tracker (MS Access)

3.2.5 The Contractor shall provide sufficient current and qualified aircrew for nine

(9) ATP events per month (average).

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Complete 50% of Scheduled Test Events per AFLCMC Det 3 OL Weekly Schedule

AQL: >=50% of Scheduled events

Work Artifacts

3.3 Provide Unit-level Support for AFLCMC Det 3 OL.

3.3.1 The Contractor shall support the Flight Manual Program (FMP) for the MQ-

1/9 Unmanned Aerial System.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: AFI 11-215, USAF Flight Manual Program (FMP), 22 Dec 2008

AQL: Consistent with all governing regulations

b) STD: TO-00-5-3, AF Technical Oder Life Cycle Management, 1 Sep 2014

AQL: Consistent with all governing regulations

Work Artifacts

W10 Technical Orders

W18 Guidance Conference Meeting Minutes

3.3.1.1 The Contractor shall manage MQ-9 Flight Manual technical content for the

MQ-1/9 Unmanned Aerial System.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: MIL-STD-38784, Standard Practice for Technical Manuals - General Style and Format

Requirements, 25 Aug 2011

AQL: 95% Administrative Error Free

b) STD: MIL-DTL-7700G, Detail Specification Flight Manual, Performance Data Appendix, Mission Crew Manual, Supplemental Manual, and Abbreviated Flight Crew Checklist, Original

Guidance

AQL: 95% Administrative Error Free

c) STD: Compliant with AFI 63-101/20-101, Integrated Life Cycle Management, 7 Mar 2013

AQL: Consistent with all governing regulations

d) STD: AFI 11-215, USAF Flight Manual Program (FMP), 22 Dec 2008

AQL: Consistent with all governing regulations

e) STD: TO-00-5-3, AF Technical Order Life Cycle Management, 1 Sep 2014

AQL: Consistent with all governing regulations

f) STD: TO 00-5-1 Technical Manual; AF Technical Order System, 15 Jan 2013

3.3.1.1.1 The Contractor shall support the FMP per Integrated Technical Order

Status and Schedule (TOSS) for MQ-1/9 Unmanned Aerial System program.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFI 63-101/20-101, Integrated Life Cycle Management, 7 Mar 2013

AQL: Consistent with all governing regulations

b) STD: AFI 11-215, USAF Flight Manual Program (FMP), 22 Dec 2008

AQL: Consistent with all governing regulations

c) STD: TO-00-5-3, AF Technical Order Life Cycle Management, 1 Sep 2014

AQL: Consistent with all governing regulations

d) STD: TO 00-5-1 Technical Manual; AF Technical Order System, 15 Jan 2013

AQL: Consistent with all governing regulations

3.3.1.1.2 The Contractor shall support USAF Verification Activities as required by the Technical Order Management Agent (TOMA).

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with MIL-STD-38784, Standard Practice for Manuals, Technical: General

Style and Format Requirements, 25 Aug 2011 or current

AQL: 95% Administrative or Omission Error Free

b) STD: Compliant with AFI 63-101/20-101, Integrated Life Cycle Management, 7 Mar 2013

AQL: Consistent with all governing regulations

3.3.1.1.3 The Contractor shall host and co-chair Technical Reviews and Flight

Manual Review Conference for MQ-1/9 Unmanned Aerial System program.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with MIL-STD-38784, Standard Practice for Manuals, Technical: General

Style and Format Requirements, 25 Aug 2011 or current

AQL: 95% Administrative or Omission Error Free

b) STD: Compliant with AFI 63-101/20-101, Integrated Life Cycle Management, 7 Mar 2013

AQL: Consistent with all governing regulations

c) STD: TO-00-5-3, AF Technical Order Life Cycle Management, 1 Sep 2014

AQL: Consistent with all governing regulations

d) STD: AFI 11-215, USAF Flight Manual Program (FMP), 22 Dec 2008

AQL: Consistent with all governing regulations

W18 Guidance Conference Meeting Minutes

3.3.1.1.4 The Contractor shall manage Flight Manuals for Prepublication Reviews

(PPR) for Medium Altitude Unmanned Aerial System (MAUAS).

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with MIL-STD-38784, Standard Practice for Manuals, Technical: General

Style and Format Requirements, 25 Aug 2011 or current

AQL: 95% Administrative or Omission Error Free

b) STD: TO-00-5-3, AF Technical Order Life Cycle Management, 1 Sep 2014

AQL: Consistent with all governing regulations

c) STD: Compliant with AFI 63-101/20-101, Integrated Life Cycle Management, 7 Mar 2013

AQL: Consistent with all governing regulations

d) STD: MIL-DTL-7700G, Detail Specification Flight Manual, Performance Data Appendix, Mission Crew Manual, Supplemental Manual, and Abbreviated Flight Crew Checklist, Original

Guidance

3.3.2 The Contractor shall manage Flight and Ground Event Scheduling for all

MQ-1/9 Production Acceptance and Developmental Test Activities.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFLCMC Det 3 OI 11-15, Planning & Scheduling Procedures for Flight

Test, Latest

AQL: >=50% of Scheduled events

b) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: No more than 3 omissions/errors per quarter

3.3.3 The Contractor shall manage, plan, and execute all MQ-1/9 Training Plans for the MQ-1/9 Aircrew.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: AFI11-2MQ-9V1, MQ-9 Crew Training, 3 Jun 2008

AQL: 90% of Contractor Aircrew meet minimum qualifications

b) STD: Compliant with AFI 11-202 Volume 1_AFMC_SUP 1, Aircrew Training, 25 Jul 2011

AQL: 90% of Contractor Aircrew meet minimum qualifications

c) STD: Compliant with AFI 11-2MQ-1V1, MQ-1 Aircrew Training, 21 Jan 2010

AQL: 90% of Contractor Aircrew meet minimum qualifications

d) STD: Compliant with AFI 10-220 IP AFMC Sup, Contractor's Flight and Ground Operations, 1

Mar 2007

AQL: Consistent with all governing regulations

3.3.4 The Contractor shall develop, manage, and execute standards/evaluations

(qualifications) for MQ-1/9 Aircrew.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFLCMC Det 3 OI 99-108, Flight Test Personnel Training and

Evaluation, 12 Feb 2012

AQL: 95% on time evaluation completion rate

b) STD: AFI 11-202 Vol 2, Aircrew Standardization/Evaluation Program, 13 Sep 2010

AQL: 95% on time evaluation completion rate

c) STD: AFI 11-2MQ-1V2, MQ-1 Crew Evaluation Criteria, 28 Nov 2008

AQL: Consistent with all governing regulations

d) STD: AFI 11-2MQ-9V2, MQ-9 Crew Evaluation Criteria, 15 Apr 2008

AQL: Consistent with all governing regulations

Work Artifacts

W05 Evaluation Management Tracker (MS Access)

3.3.5 The Contractor shall manage Aviation Resource Management System

(ARMS) and verify Go-No Go Criteria for the MQ-1/9 Aircrew before each test event/flight.

Performance Standards (STDs) and Acceptable Quality Levels (AQLs)

a) STD: Compliant with AFI11-401, AFMC Sup 1, Aviation Management, 7 Feb 2014 or latest

AQL: 95% Administrative or Omission Error Free

Work Artifacts

W01 ARMS Extract

3.3.5.1 The Contractor shall coordinate real-time flight issues including weather, test range reservations, and frequencies for the MQ-1/9 Aircrew for each test event/flight.

a) STD: Compliant with AFLCMC Det 3 OI 11-15, Planning & Scheduling Procedures for Flight

Test, Latest

AQL: Consistent with all governing…