Addendum_1_12_Dec_14.docx

DOCX document 16 KB Posted

Attached to
Bldg 418 - Paint Metal Roof
Solicitation number
FA6712-15-B-0001
Issued by

About this file

Addendum 1 re-Specifications Section 09910 - Painting

View the file

Other files

File Type Posted
Corrugated_Metal_Dimensions.pdf PDF
FA6712-15-B-0001-0001.pdf PDF
Record_of_Site_Visit_Bldg_418.pdf PDF
JLSS 14-0007_Sheet 03 of 04_A002_North and West Elevations.pdf PDF
01600 products.doc DOC document
01320 progress doc.doc DOC document
00001 cover 100 .doc DOC document
00110 table of contents.doc DOC document
01410 Env Spec Section —
01400 quality requirements.doc DOC document
01783 project record docs.doc DOC document
01500 temp facilities.doc DOC document
01340 submittal procedures.doc DOC document
Davis_Bacon_Wage_Determination_as_of_22_Aug_2014.pdf PDF
JLSS 14-0007_Sheet 02 of 04_A001_Roof Plan.pdf PDF
01010 summary 90 .docx DOCX document
JLSS 14-0007_Sheet 01 of 04_G001_Project Location.pdf PDF
02085 Disturbance of Lead Containing Surface Coatings.doc DOC document
FA6712-15-B-0001.pdf PDF
01770 close out.doc DOC document
01813a apendx.doc DOC document
J34786-1 UDS Level 2 Report Final Report.pdf PDF
09910 Painting 90 .doc DOC document
01340a report.doc DOC document
JLSS 14-0007_Sheet 04 of 04_A003_South and East Elevations.pdf PDF
00115 drawing index.doc DOC document
01813_green procur.doc DOC document
01100 work restrictions.doc DOC document
Show all 28

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ADDENDUM NUMBER 1

JLSS 14-0007, Paint Metal Roof, Building 418 12 Dec 2014

1. On Specifications Section 09910 Paragraph 3.6.A.1.b. Replace the paragraph in its entirety to read: “First and Second Coats: Full-gloss, exterior, Uniflex: Premium Elastomeric Roof Coating Tint Base 41-30D or an elastomeric coating that’s comparable to the Uniflex stated or an approved equal, applied at spreading rate recommended by the manufacturer to achieve a total dry film thickness of not less than 8.4 mils (0.212 mm) per coat”.

2. On Specifications 09910 Remove Paragraph 3.6.B Zinc Coated Metal in its entirety.

END OF ADDENDUM 1

File details come from the government source that posted it. Updated .