Atch_47_WD_NV160034_20160108.pdf

General Decision Number: NV160034 01/08/2016 NV34

Superseded General Decision Number: NV20150034

State: Nevada

Construction Type: Highway

County: Clark County in Nevada.

EXCLUDES NEVADA TEST SITE (NTS), NATIONAL TEST AND TRAINING

RANGE (NTTR) & TONOPAH TEST RANGE (TTR)

HIGHWAY CONSTRUCTION PROJECTS (excluding tunnels, building structures in rest area projects & railroad construction;

bascule, suspension & spandrel arch bridges designed for commercial navigation, bridges involving marine construction;

and other major bridges).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis-Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least

$10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/08/2016

SUNV2011-001 10/01/2010

Rates Fringes

BRICKLAYER.......................$ 45.43

BRICKLAYER ZONE PAY: add the applicable amounts per hour calculated based on radius of 50 miles from the City Hall in

Las Vegas, Nevada.

Zone 1: 0 to 40 miles $0.00

Zone 2: over 40 to 50 miles $2.50

Zone 3: over 50 to 70 miles $5.00

Zone 4: over 70 miles $7.50

The area within the city limits of Boulder City and Primm, Nevada shall be considered free zones.

CARPENTER........................$ 48.95

CARPENTER ZONE PAY: add the applicable amounts per hour calculated from Maryland Parkway and Charleston Boulevard, Las

Vegas.

Zone 1: 0 to 40 miles $0.00

Zone 2: over 40 to 60 miles $2.50

Zone 3: over 60 miles $4.25

Laughlin Area: $2.00

CEMENT MASON/CONCRETE FINISHER...$ 46.28

CEMENT MASON ZONE PAY: add the applicable amounts per hour calculated based on a radius from the City Hall of Las Vegas, Nevada:

Zone 1: 0 to 30 miles $0.00

Zone 2: over 30 to 50 miles $1.50

Zone 3: over 50 miles $3.25

ELECTRICIAN

Electrician

Neon Sign..................$ 45.52

Wireman....................$ 56.31

Line Construction

Groundman..................$ 35.33

Heavy Equipment Operator...$ 43.37

Lineman....................$ 52.82

ZONE PAY (Electrician Only does not apply to Line

Construction): add the applicable amounts per hour calculated based on a radius from City Hall of Las Vegas.

Zone 1: 0 to 25 miles $0.00

Zone 2: over 25 to 55 miles $2.50

Zone 3: over 55 miles $3.50

FENCE ERECTOR....................$ 17.46

Hod Carrier (Brick Mason

Tender)..........................$ 43.31

IRONWORKER.......................$ 56.74

LABORER

Flagperson..................$ 41.44

Group 1.....................$ 42.94

Group 2.....................$ 43.15

Group 3.....................$ 43.25

Group 4.....................$ 43.34

Group 5.....................$ 43.44

Highway Striper.............$ 30.81

Traffic Barrier Erector.....$ 42.94

LABORER ZONE PAY: add the applicable amounts per hour calculated based on a radius from the City Hall of Las Vegas, Nevada.

Zone 1: 0 to 30 miles: $0.00

Zone 2: over 30 to 50 miles: $1.50

Zone 3: over 50 miles: $3.25

Laughlin Area: $2.25

LABORER CLASSIFICATIONS:

Group 1

Construction Clean-Up; Dry packing of concrete & filling of form bolt holes; File grader, street paving, airport runways;

Guinea chaser; demolition or general construction; packing rod steel & pans; temporary water lines (portable type); Landscape gardener; Nurseryman; Tarman and mortarman, kettleman, potman and man applying asphalt, lay-kold creosote, fine, and similar type materials; Underground, including caisson bellowers;

Scaffold Erector (under 14 ft.); Landscape Decorative rock

Installer - (Ponds, Waterfalls, Etc.); Materials Handler; Tool

Crib; Light Crib; Light Tool Repairman; Mechanical Stabilized

Earth Wall; Certified Firewatch.

Group 2

Asphalt raker, ironer, spreader, luteman; Buggymobile man;

Cement dumper (on one yard or larger mixers & handling bulk cement); Cesspool digger and installer; Chucktender; Concrete core cutter; Concrete curer, impervious membrane and oiler of all materials; Concrete saw man, excluding tractor type, cutting, scoring old or new concrete; Gas and oil wrapper, pot tender and form man; Making and caulking of all non-metallic pipe joints; Operators and tenders of pneumatic and electric tools, vibrating machines, hand propelled trenching machines, impact wrench multiplate and similar mechanical tools not separately classified herein; Operator of cement grinding machine; Riprap stonepaver; Roto-scraper; Sandblaster (pot tender); Scaler

Septic tank digger and installer (lead man); Tank scaler and cleaner; Tree climber, faller, chain saw operator, Pittsburgh chipper and similar type brush shredders.

Group 3

Cutting torch operator; Jackhammer and/or pavement breaker;

Laying of all non-metallic pipe, including landscape sprinklers, sewer pipe, drain pipe and underground tile;

Mudcutter; Concrete vibrator operator, all sizes; Rock slinger; Scaler (using bos'n chair or safety belt or power tools); Laying of all metallic and non-metallic pipe, p.v.c.

and duct bank, including landscape sprinklers, sewer pipe, drain pipe and underground tile; Cement dumper (on one yard or larger mixers and handling bulk cement; Concrete core cutter;

Concrete curer, impervious membrane and oiler of all materials; Decorative rock installer (ponds, waterfalls, etc.); Shotcrete/gunite.

Group 4

Cribber or shorer, lagging, sheeting, trench bracing, hand guided lagging hammer; Head rock slinger; Powderman-blaster;

Sandblaster (nozzleman); Steel header-board man

Group 5

Driller (core, diamond or wagon); Joy driller model TW-M-2A, Gardner-Denver model DH 143 and similar type drills

MILLWRIGHT.......................$ 49.95

MILLWRIGHT ZONE PAY: add the applicable amounts per hour calculated from Maryland Parkway and Charleson Boulevard, Las

Vegas

Zone 1: 0 to 20 miles $0.00

Zone 2: over 20 to 40 miles $1.50

Zone 3: over 40 miles $3.25

PAINTER..........................$ 46.64

PILEDRIVERMAN....................$ 58.47

PLUMBER/PIPEFITTER...............$ 56.52

PLUMBER ZONE PAY: employees performing work on Public Works covered by this Agreement shall be entitled to the following wage rates for all hours worked calculated on an air mile radius from the Clark County Regional Justice Center.

Zone 2: over 20 to 45 miles $3.75

Zone 3: over 45 to 75 miles $7.50

Zone 4: over 75 miles $11.25

POWER EQUIPMENT OPERATOR:

(Cranes, Piledriving, &

Hoisting Equipment)

Group 1

Engineer Oiler.............$ 59.35

Forklift...................$ 55.67

Truck Crane Oiler..........$ 59.35

A-Frame or Winch Truck;

Ross Carrier (Jobsite).....$ 58.26

Group 4

Bridge-Type Unloader and

Turntable Operator;

Helicopter Hoist...........$ 58.40

Group 5

Hydraulic Boom Truck

(Pittman); Stinger Crane

(Austin-Western or

Similar Type); Tugger

Hoist (1 Drum).............$ 58.62

Group 6

Bridge Crane; Cretor

Craner; Hoist (Chicago

Boom and Similar Type);

Lift Mobile; Lift Slab

Machine (Vagtbor and

Similar Types); Material

Hoist/Manlift; Polar

Gantry Crane; Self

Climbing Scaffold (or

Similar Type); Shovel, Backhoe, Dragline, Clamshell (Over 3/4 YD.

and up to 5 CU. YDS.);

Silent Piler; Tugger

Hoist (2 Drum).............$ 58.73

Group 7

Pedestal Crane; Shovel, Backhoe, Dragline, Clamshell (over 5 CU.

YDS.); Tower Crane

Repairman; Tugger Hoist

(3 Drum)...................$ 58.85

Group 8

Crane Operator (up to and including 25 ton capacity).$ 60.82

Crawler Transporter;

Derrick Barge (up to and including 25 ton capacity); Hoist, Stiff legs, Guy Derrick or

Similar Type (up to and including 25 ton capacity); Shovel, Backhoe, Dragline, Clamshell (Over 7 CU YDS.).$ 59.02

Group 9

Crane Operator (over 25 tons up to and including

50 tons)...................$ 60.82

Derrick Barge (over 25 tons up to and including

50 tons); Highline

Cableway; Hoise, Stiff

Legs, Guy Derrick or

Similar Type (over 25 tons and up to and including 50 tons); K-

Crane; Polar Crane; Self

Erecting Tower Crane

Maximum Lifting Capacity

10 tons. 1 ton Operator....$ 59.19

Group10

Crane (over 50 tons up to and including 100 tons);

Mobile Tower Crane (over

50 tons up to and including 100 tons)........$ 62.24

Derrick Barge (over 50 tons up to and including

100 tons); Hoist, Stiff

Legs, Guy Derrick or

Similar Type (over 50 tons up to and including

100 tons)..................$ 60.19

Group11

Crane (over 100 tons up to and including 200 tons); Mobile Tower Crane

(over 100 tons up to and including 200 tons)........$ 62.74

Derrick Barge (over 100 tons up to and including

200 tons); Hoist

Operator, Stiff Legs, Guy

Derrick or Similar Type

(over100 tons up to and including 200 tons)........$ 61.19

Tower Crane and Tower

Gantry.....................$ 63.19

Group12

Crane (over 200 tons up to and including 300 tons); Mobile Tower Crane

(over 200 tons up to and including 300 tons)........$ 65.38

Derrick Barge (over 200 tons up to and including

300 tons); Hoist, Stiff

Legs, Guy Derrick or

Similar Type (over 200 tons up to and including

300 tons)..................$ 62.19

Group13

Crane (over 300 tons);

Mobile Tower Crane (over

300 tons)..................$ 66.75

Derrick Barge (over 300 tons); Helicopter Pilot;

Hoist Operator, Stiff

Legs, Guy Derrick or

Similar Type (over 300 tons)......................$ 63.19

(Group 1-8)

Equipment Greaser (Grease

Truck)......................$ 58.40

Equipment Greaser (Rack)....$ 56.91

Group 1.....................$ 55.67

Group 2.....................$ 56.62

Group 3.....................$ 56.91

Group 4.....................$ 58.40

Group 6.....................$ 58.62

Group 8.....................$ 58.73

ZONE PAY [ALL POWER EQUIPMENT OPERATORS INCLUDING CRANES,

PILEDRIVING AND HOISTING EQUIPMENT]: add the applicable amounts per hour calculated from the City Hall of Las Vegas, Nevada.

Zone 2: over 20 to 40 miles $2.00

Zone 3: over 40 to 60 miles $3.00

Zone 4: over 60 miles $3.50

POWER EQUIPMENT OPERATOR CLASSIFICATIONS (GROUP 1-8):

Bargeman; Blade Assistant; Brakeman; Compressor; Ditch Witch, with seat or similar type equipment; Elevator - inside;

Engineer Oiler; Forklift (under 5 Tons); Generator; Generator, Pump or Compressor Plant; Pump; Signalman; Steam

Cleaner/Pressure Washer; Switchman.

Asphalt-Rubber Plant (Nurse Tank); Concrete Mixer - Skip type;

Conveyor; Forklift (over 5 Tons); Hydrostatic Pump; Oiler

Crusher (Asphalt or Concrete Plant); PJU Side Dump Jack;

Rotary Drill Tender (Oilfield); Screening and Conveyor Machine

(or similar types); Skiploader (wheel type up to ¾ yd. without attachment); Tar Pot Fireman; Temporary Heating Plant;

Trenching Machine Oiler.

Asphalt-Rubber Blend; Bobcat or similar type (Skid Steer);

Ford Ferguson (with dragtype attachments); Helicopter Radioman

(ground); Stationary Pipe Wrapping and Cleaning Machine.

Asphalt Plant Fireman; Backhoe (Mini-Max or similar type);

Boring Machine; Boring System Electronic Tracking Locator;

Boxman or Mixerman (Asphalt or Concrete); Chip Spreading

Machine; Concrete Cleaning Decontamination Machine; Concrete

Pump (small portable); Drilling Machine, Small Auger Types

(Texoma Super Economatic, or similar types - Hughes 100 or

200, or similar types - drilling depth of 30' maximum); Guard

Rail Post Driver; Highline Cableway Signalman; Horizontal

Directional Drilling Machine; Hydra-Hammer-Aero Stomper; Power

Concrete Curing Machine; Power Concrete Saw; Power - Driven

Jumbo Form Setter; Power Sweeper; Rock Wheel Saw/Trencher;

Roller (compacting); Screed (Asphalt or Concrete); Trenching

Machine (up to 6 ft.); Vacuum or Muck Truck.

Group 6

Articulating Material Hauler; Asphalt Plant Engineer; Batch

Plant; Bit Sharpener; Concrete Joint Machine (canal and similar type); Concrete Planer; Dandy Digger; Deck Engine;

Derrickman (Oilfield type); Drilling Machine, Bucket or Auger

Types (Calweld 100 Bucket or similar types - Watson 1000 Auger or similar types - Texoma 330, 500 or 600 Auger or similar types - drilling depth of 45' maximum); Drilling Machine

(including water wells); Hydrographic Seeder Machine (straw, pulp or seed); Jackson Track Maintainer, or similar type;

Kalamazoo Switch Tamper, or similar type; Machine Tool;

Maginnis Internal Full Slab Vibrator; Mechanical Berm, curb or gutter (concrete or asphalt); Mechanical Finisher Operator

(concrete, Clary-Johnson-Bidwell or similar); Pavement Breaker

(truck mounted); Road Oil Mixing Machine; Roller (asphalt or finish); Rubber-Tired Earth Moving Equipment (single engine, up to and including 25 yds. struck); Self-Propelled Tar

Pipelining Machine; Skiploader (crawler and wheel type, over ¾

yd. and up to and including 1½ yds.); Slip Form Pump (power driven hydraulic lifting device for concrete forms); Tractor -

Bulldozer, Tamper-Scraper (single engine, up to 100 h.p.

flywheel and similar types, up to and including D-5 and similar types); Tugger Hoist (1 drum); Ultra High Pressure

Waterjet Cutting Tool System; Vacuum Blasting Machine.

Group 8

Asphalt or Concrete Spreading (Tamping or Finishing); Asphalt

Paving Machine (Barber Greene or similar type); Asphalt-Rubber

Distributor; Backhoe (up to and including ¾ yd.); Cast in

Place Pipe Laying Machine; Combination Mixer and Compressor

(Gunite Work); Compactor - self propelled; Concrete Mixer -

Paving; Crushing Plant (Non Portable); Drill Doctor; Drilling

Machine, Bucket or Auger Types (Calweld 150 Bucket or similar types - Watson 1500, 2000, 2500 Auger or similar types -

Texoma 700, 800 Auger or similar types - drilling depth of 60' maximum); Elevating Grader; Grade Checker; Gradall; Grouting

Machine; Heavy Duty Repairman; Heavy Equipment Robotics;

Kalamazoo Balliste Regulator or similar type Kolman Belt

Loader and similar type; Le Tourneau Blob Compactor or similar type; Loader (Athey, Euclid, Sierra and similar types); Master

Environmental Maintenance Mechanic; Mobark Chipper or similar types; Ozzie Padder or similar types; PC 490 Slot Saw;

Pneumatic Concrete Placing Machine (Hackley-Presswell or similar type); Portable Crushing Plant; Pumpcrete Gun; Rock

Drill or similar types; Rotary Drill (excluding Caison type);

Rubber-Tired Earth Moving Equipment (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50

cu. yds. struck); Rubber-Tired Earth Moving Equipment

(multiple engine - up to and including 25 yds. struck); Rubber-

Tired Scraper (self-loading paddle wheel type - John Deere, 1040 and similar single unit); Self-Propelled Curb and Gutter

Machine; Shuttle Buggy; Skiploader (crawler and wheel type over 1½ yds. up to and including 6½ yds.); Soil Remediation

Plant (C.M.I. Enviro Tech Thermal or Similar Types); Surface

Heaters and Planer; Tractor Compressor Drill Combination;

Tractor (any type larger than D-5 - 100 flywheel h.p. and over, or similar - Bulldozer, Tamper, Scraper and Push

Tractor, single engine); Tractor (boom attachments); Traveling

Pipe Wrapping, Cleaning and Bending Machine; Trenching Machine

(over 6 ft. depth capacity, manufacturer's rating); Trenching

Machine with Road Miner Attachment (over 6 ft. depth capacity, manufacturer's rating); Ultra High Pressure Waterjet Cutting

Tool System Mechanic; Water Pull (compaction).

(Groups 10 to 25)

Group 10....................$ 58.85

Group 11....................$ 59.95

Group 12....................$ 59.02

Group 13....................$ 59.12

Group 14....................$ 59.15

Group 15....................$ 59.23

Group 16....................$ 59.35

Group 17....................$ 59.52

Group 18....................$ 59.62

Group 19....................$ 59.73

Group 20....................$ 59.85

Group 21....................$ 60.02

Group 22....................$ 60.12

Group 23....................$ 60.23

Group 24....................$ 60.35

Group 25....................$ 60.52

POWER EQUIPMENT OPERATOR CLASSIFICATIONS (GROUP 10-25):

Group 10

Drilling Machine, Bucket or Auger Types (Calweld 200 B Bucket or similar types - Watson 3000 or 5000 Auger or similar types -

Texoma 900 Auger or similar types - drilling depth of 105' maximum); Dual Drum Mixer; Monorail Locomotive (diesel, gas or electric); Motor Patrol - Blade (single engine); Multiple

Engine Tractor (Euclid and similar type - except Quad 9 Cat.);

Pneumatic Pipe Ramming Tool and similar types; Pre-Stressed

Wrapping Machine (2 Operators required); Rubber-Tired Earth

Moving Equipment (single engine, over 50 yds. struck); Rubber-

Tired Earth Moving Equipment (multiple engine, Euclid, Caterpillar and similar - over 25 yds. and up to 50 yds.

struck); Tower Crane Repairman; Tractor Loader (crawler and wheel-type over 6½ yds.); Woods Mixer (and similar Pugmill equipment).

Group 11

Dynamic Compactor LDC350 (or similar types).

Group 12

Auto Grader; Automatic Slip Form; Drilling Machine, Bucket or

Auger Types (Calweld, Auger 200 CA or similar types - Watson, Auger 6000 or similar types- Hughes Super Duty, Auger 200 or similar types - drilling depth of 175' maximum); Hoe Ram or similar with Compressor; Mass Excavator - Less than 750 cu.

yds.; Mechanical Finishing Machine; Mobile Form Traveler;

Motor Patrol (multi-engine); Pipe Mobile Machine; Rubber-Tired

Earth Moving Equipment (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-Tired Self-

Loading Scraper (paddle-wheel-Auger type self-loading - 2 or more units); Vermeer Rock Trencher (or similar type).

Group 13

Rubber-Tired Earth Moving Equipment, equipment with the Push-

Pull System (single engine, up to and including 25 yds.

struck).

Group 14

Canal Liner (not less than 4 employees - Oiler, Mechanic, Grade Checker required); Canal Trimmer; Remote Controlled

Earth Moving Equipment (no one shall operate more than two pieces of earth moving equipment at one time - $1.00 per hour additional to base rate); Wheel Excavator (over 750 cu. yds.

per hour).

Group 15

Pull System (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds.

and up to and including 50 cu. yds. struck); Rubber-Tired

Earth Moving Equipment, equipment with the Push-Pull System

(multiple engine - up to and including 25 yds. struck).

Group 16

Pull System (single engine, over 50 yds. struck); Rubber-Tired

Earth Moving Equipment, equipment with the Push-Pull System

(multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck).

Group 17

Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Tandem Tractor (crawler type tractors in tandem - Quad 9 and similar type).

Group 18

Rubber-Tired Earth Moving Equipment, in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - single engine, up to and including 25 yds.

struck).

Group 19

Rotex Concrete Belt (or similar types); Rubber-Tired Earth

Moving Equipment, in Tandem (scrapers, belly dumps, and similar types in any combination, including compaction units -single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck); Rubber-Tired Earth Moving

Equipment, in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck).

Group 20 compaction units - single engine, over 50 yds. struck); Rubber-

Tired Earth Moving Equipment, in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck).

Group 21 compaction units - multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck).

Group 22

Rubber-Tired Earth Moving Equipment, equipment with the Tandem

Push-Pull System (single engine, up to and including 25 yds.

struck)

Group 23

Push-Pull System (single engine, Caterpillar, Euclid, Athey

Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck); Rubber-Tired

Earth Moving Equipment, equipment with the Tandem Push-Pull

System (multiple engine, up to and including 25 yds. struck).

Group 24

Push-Pull System (single engine, over 50 yds. struck); Rubber-

Tired Earth Moving Equipment, equipment with the Tandem Push-

Pull System (multiple engine, Euclid, Caterpillar and similar, over 25 yds. & up to 50 yds. struck).

Group 25

Concrete Pump - truck mounted (Oiler required when boom over

105' or 36 meters); Rubber-Tired Earth Moving Equipment, equipment with the Tandem Push-Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck).

TRUCK DRIVER

Group 1.....................$ 46.13

Group 2.....................$ 46.23

Group 3.....................$ 46.44

Group 4.....................$ 46.62

Group 5.....................$ 46.82

Group 6.....................$ 47.12

TRUCK DRIVER ZONE PAY: add the applicable amounts per hour calculated from Las Vegas City Hall.

Zone 1: 0 to 30 miles $0.00

Zone 2: over 30 to 50 miles $1.50

Zone 3: over 50 to 70 miles $2.50

Zone 4: over 70 miles $3.50

TRUCK DRIVER CLASSIFICATIONS:

Drivers of dump trucks (less than 12 yds. water level), drivers of trucks (legal payload capacity less than 15 tons), water and fuel truck drivers under 2,500 gal, pickup driver, service station attendant, teamster equipment, warehousemen, drivers of busses used for transportation of up to 16 passengers.

Drivers of dump trucks (12 yds but less than 16 yds water level), drivers of trucks (legal payload capacity between 15 and 20 tons), drivers of transit mix trucks (under 3 yds), dumpcrete trucks (less than 6 ½ yds water level), gas and oil pipeline working truck drivers, including winch truck and all sizes of trucks, water and fuel truck drivers (2,500 gal to

4,000 gal), truck greaser, drivers of busses (used for transportation or more than 16 passengers), warehouse clerk.

Drivers of dump trucks (16 yds up to and including 22 yds water level), drivers of trucks (legal payload cap. 20 tons but less than 25 tons), drivers of dumpster trucks, drivers of transit-mix trucks (3 yds but less than 6 yds), dumpcrete trucks (6 ½ yds water level and over), fork lift driver, Ross

Carrier driver, highway water and fuel drivers (4,001 gallon but less than 6,000 gallon), stock room clerk, tireman.

Drivers of transit-mix trucks (6 yds or more), drivers of dump trucks (over 22 yds. water level), drivers of trucks (legal payload capacity 25 tons and over), drivers of fuel and water trucks (6,000 gallon and over).

Group 5

Drivers of trucks and trailers in combination (six axles or more).

Group 6

All Off-road Equipment, Truck Repairman, Transport Drivers and

Drivers of Road Oil Spreader Trucks, DW 10 and DW 20 Euclid-type equipment Letourneau pulls, Terra Cobras and similar types of equipment, also PB and similar type trucks when performing work within the Teamster jurisdiction, regardless of types of attachment, including power units pulling off-highway belly dumps in tandem.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or

"UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION