J-03 List of Applicable Documents.pdf

DTFAWA-17-R-00049

ATTACHMENT J-03

LIST OF APPLICABLE DOCUMENTS

PAGE J-03-1

The most current version of the following documents at the time of contract award must be considered requirements of this contract and adhered to by the Contractor.

Document Number Title Comments National Electrical Manufacturers Association (NEMA)

NEMA 250-2008 Enclosures for Electrical Equipment (1000 Volts Maximum)

NEMA ICS 1-2008 Industrial Control and Systems, General Requirements NEMA ICS 2-2000 Industrial Control and Systems, Controllers, Contactors and Overhead Relay Rated 600 Volts

NEMA ICS 6-1993

(R2001, R2006)

Industrial Control and Systems, Enclosures

NEMA OS 1-2013 Sheet-Steel Outlet Boxes, Device Boxes, Covers, and Box Supports

NEMA RN 1-2005

(R2013)

Polyvinyl-Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit

National Institute of Standards and Technology (NIST) NIST SP 800-73-3 Interfaces for Personal Identity Verification (4 Parts) NIST SP 800-116 A Recommendation for the Use of PIV Credentials in

Physical Access Control Systems (PACS)

American Society for Testing and Materials (ASTM) ASTM A36/A36M Steel, Structural, Carbon

ASTM A48/A48M-03

(2012)

Gray Iron Castings

ASTM A53/A53M Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded, and Seamless

Superseded

ASTM A120

ASTM A123/123M-13 Zinc (Hot Dipped Galvanized) Coatings on Iron and Steel Products

ASTM A153/A153M-09 Zinc Coating (Hot Dip) on Iron and Steel Hardware

ASTM A580/A580M-

13b

Stainless Steel Wire

ASTM A853-04(2010) Steel Wire, Carbon, for General Use ASTM B2-13 Medium Hard Drawn Copper Wire ASTM B8-11 Concentric Lay Stranded Copper Conductors, Hard, Medium-Hard, or Soft

ASTM B117-11 Operating Salt Spray (Fog) Apparatus ASTM B1654-08 Standard Test Method for Evaluation of Painted or Coated

Specimens Subjected to Corrosive Environments

ASTM C79/C79M-04 Treated Cored and Non-treated Core Gypsum Sheathing Board

ASTM C150/C150M-12 Portland Cement ASTM C177-13 Steady State Thermal Transmission Properties by Means of the Guarded Hot Plate

ASTM C208-12 Cellulosic Fiber Insulating Board ASTM C303-10 Density of Preformed Block Type Thermal Insulation ASTM C416-08(2013) Vermiculite Loose Fill Thermal Insulation ASTM C475/C475M-12 Joint Compound and Joint Tape for Finishing Gypsum

PAGE J-03-2

Document Number Title Comments ASTM C478-14 Precast Reinforced Concrete Manhole Sections ASTM C514-04(2014) Nails for the Application of Gypsum Board ASTM C518-10 Steady State Heat Flux Measurements and Thermal ASTM C549-06(2012) Perlite Loose Fill Insulation ASTM C552-14 Cellular Glass Thermal Insulation ASTM C553-13 Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Use

ASTM C557-03(2009) Adhesive for Fastening Gypsum Wallboard to Wood Framing

ASTM C578-14 Rid, Cellular Polystyrene Thermal Insulation ASTM C591-13 Un-faced Preformed Rigid Cellular Polyisocyanurate

Thermal Insulation

ASTM C612-14 Mineral Fiber Block and Board Thermal Insulation

ASTM C635/C635M-

13a

Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings

ASTM C636/C636M-13 Installation of Metal Ceiling Suspension System for Acoustical Tile and Lay-In Panels

ASTM C645-13 Nonstructural Steel Framing Members ASTM C665-12 Mineral-Fiber Blanket Thermal Insulation for Light Frame

Construction and Manufactured Housing

ASTM C726-12 Mineral Wool Roof Insulation Board ASTM C739-11 Cellulosic Fiber (Wood-Base) Loose-Fill Thermal

Insulation

ASTM C754-11 Installation of Steel Framing Members to Receive Screw- Attached Gypsum Panel Products

ASTM C764-11 Mineral Fiber Loose-Fill Thermal Insulation ASTM C840-13 Application and Finishing of Gypsum Board ASTM C955-11c Load-Bearing (Transverse and Axial) Steel Studs, Runners

(Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Boxes

ASTM C1002-14 Steel Drill Screws for the Application of Gypsum Board or Metal Plaster Bases

ASTM C1136-12 Flexible, Low Permeance Vapor Retarders for Thermal Insulation

ASTM C1177/C1177M-

Glass Mat Gypsum Substrate for Use as Sheathing

ASTM C1289-14a Faced Rigid Cellular Polyisocyanurate Thermal Insulation

ASTM C1396/C1396M-

14a

Gypsum Wallboard Superseded C630, C931, C960

ASTM D1435-13 Outdoor Weathering of Plastics ASTM D1621-10 Compressive Properties of Rigid Cellular Plastics ASTM D1654-08 Evaluation of Painted or Coated Specimens Subjected to

Corrosive Environments

PAGE J-03-3

ASTM D2898-10 Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

ASTM D3273-12 Resistance to Growth of Mold on the Surface of Interior Coating in an Environmental Chamber

ASTM D3274-09/2013 Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation

ASTM D3498-03(2011) Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

ASTM D3679-13 Rigid Poly (Vinyl Chloride) (PVC) Siding ASTM D4214-07 Evaluating Degree of Chalking of Exterior Paint Films ASTM D4258-05(2012) Surface Cleaning Concrete for Coating ASTM E84-14 Surface Burning Characteristics of Building Materials ASTM E96/E96M-13 Water Vapor Transmission of Materials ASTM E119-12a Fire Tests of Building Construction and Materials

ASTM E154/E154M-

08a(2013)e1

Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

ASTM E580/E580M-14 Application of Ceiling Suspension Systems for Acoustical Tile and Lay in Panels in Areas Requiring Seismic Restraint

ASTM E814-13a Methods for Fire Tests of Through –Penetration Fire Stops ASTM E1264-08e1 Standard Classification for Acoustical Ceiling Products

ASTM E1414/E1414M-

11ae1

Standard Test for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

ASTM F547-06(2012) Definitions of Terms Relating to Nails for Use with Wood and Wood-Base Materials

National Fire Protection Association (NFPA)

NFPA 70 – 2014

Edition

National Electrical Code

NFPA 72 – 2013

Edition

National Fire Alarm Code

NFPA 80 – 2013

Edition

Fire Doors and Windows

NFPA 101 – 2015

Edition

Life Safety Code

NFPA 780 National Lightning Protection Code Installation of Lightning Protection Systems

Underwriter’s Laboratories (UL) UL 6 Edition – 14 Rigid Metal Conduit UL 44 – Edition 18 Thermostat – Insulated Wires and Cables UL 98 – Edition 13 Enclosed and Dead Front Switches UL 263 – Edition 14 Fire Tests of Building Construction and Materials UL 294 – Edition 6 Access Control System Units UL 467 – Edition 10 Grounding and Bonding Equipment UL 486a – Edition 2 Wire Connectors and Soldering Lugs for Use with Copper

Conductors

PAGE J-03-4

UL 497B Protectors for Data Communications and Fire-Alarm

Circuits

UL 506 – Edition 13 Specialty Transformers UL 514a – Edition 11 Metallic Outlet Boxes UL 514b – Edition 6 Conduit, Tubing, and Cable Fittings UL 674 – Edition 5 Electric Motors and Generators for Use in Hazardous

(Classified) Locations

UL 681 – Edition 15 Installation and Classification of Burglar and Holdup Alarm Systems

UL 796 – Edition 10 Printed-Wiring Boards UL 1029 – Edition 5 High Intensity Discharge Lamp Ballasts UL 1449 – Edition 4 Surge Protective Devices UL 1479 – Edition 3 Fire Tests of Through Penetration Fire Stops UL 1492 – Edition 2 Audio-Video Products and Accessories Superseded UL

UL 1598 – Edition 3 Luminaires Superseded UL

UL 60950 Safety for Information Technology Equipment Superseded UL

American National Standards Institute (ANSI)

AASHTO LTS –

Edition 6

Standard Specification for Structural Supports for Highway Signs, Luminaires and Traffic Signals

ANSI C78.42 Electric Lamps - High-Pressure Sodium Lamps Supersedes C78.1350, C78.1351, C78.1355

ANSI C80: 2005 Rigid Steel Conduit – Zinc Coated ANSI C82.4: 2002 Ballast for High Intensity Discharge and Low Pressure

Sodium Lamps (Multiple Supply Type)

ANSI C119.1 – 2011 Electric Connector Sealed Insulated Underground Connector Systems Rated 600 Volts

ANSI C135.1 – 1999 Galvanized Steel Bolts and Nuts for Overhead Line Construction

ANSI C136.2 – 1996 Roadway Lighting Equipment – Luminaires, Voltage Classification

ANSI C136.3 – 1995 Roadway Lighting Equipment – Luminaire Attachments ANSI C136.6 – 1997 Roadway Lighting Equipment – Metal Heads and

Reflector Assemblies Mechanical and Optical Interchangeability

ANSI C136.9 – 2003 Roadway and Area Lighting Equipment – Socket Support Assemblies for Metal Heads Mechanical Interchangeability

ANSI C136.10 – 1996 Roadway Lighting Equipment – Locking Type Photocontrol Devices and Mating Receptacle – Physical and Electrical Interchangeability and Testing

ANSI 136.11 – 1995 Roadway Lighting Equipment – Multiple Sockets

PAGE J-03-5

ANSI C136.15 – 2011 Roadway and Area Lighting Equipment Luminaire Field

Identification

ANSI S3.2 American National Standard Method For Measuring The Intelligibility Of Speech Over Communication Systems

ANSI/GEIA 748-B –

Earned Value Management System

ANSI/UL 797 – 2012 Safety for Electrical Metallic Tubing – Steel Lightning Protection Institute

LPI 175 – 2014 Design – Installation – Inspection of Lightning Protection Systems

American Society of Mechanical Engineers ASME B16.5 – 2013 Pipe Flanges and Flanged Fittings

Illuminating Engineering Society of North America (IESNA) ANSI IESNA RP-8-14 Roadway Lighting

Institute of Electrical and Electronics Engineers (IESNA) IEEE C2 – 2007 National Electrical Safety Code IEEE C62.36 – 1994 IEEE Standard Test Methods for Surge Protectors Used in

Low-Voltage Data, Communications, and Signaling Circuits

IEEE C62.41.1 – 2002 Surges in Low-Voltage AC Power Circuits IEEE STD 100-2000 The IEEE Standard Dictionary of Electrical and

Electronics Terms

COE Technical Instructions (TI) TI 809-04 – 1998 Seismic Design for Buildings

Commercial Item Description (CID) CID A-A-2246 Paint, Latex CID A-A-2336 Primer Coating (Alkyd, Exterior Wood, White and Tints) CID A-A-2962A Enamel, Alkyd, Exterior, Solvent Based, Low VOC CID A-A-2994 Primer Coating, Interior, for Walls and Wood

Steel Door Institute (SDI) SDI A250.8 – 2014 Recommended Specifications for Standard Steel Doors Superseded SDI-

SDI-111-09 and 111A Recommended Steel Door Details SDI-111-D Recommended Door, Frame, and Hardware Schedule for

Standard Steel Doors and Frames

SDI-117-13 Manufacturing Tolerances for Standard Steel Doors and Frames

Federal Specifications A-A-50553A Fittings for Conduit, Metal, Rigid (Thick Wall and Thin

Wall (EMT) Type)

A-A-50563A Conduit Outlets, Boxes, Bodies and Entrance Caps, Electrical; Cast Metal – For Shore Use

A-A-55809B Insulation Tape, Electrical, Pressure Sensitive Adhesive, Plastic or Low Temperature Application

A-A-59213 Splice Connectors

PAGE J-03-6

A-A-59214 Junction Box; Extension, Junction Box; Cover, Junction

Box

A-A-59551 Wire, Electrical Copper (Uninsulated) A-A-59544A Cable and Wire, Electrical (Power, Fixed Installation) L-P-390C(2) Plastic, Molding and Extrusion Material, Polyethylene and

Co-polymers – Low, Medium, and High Density

MIL-P-53030 Primer Coating, Synthetic, Rust-inhibiting, Lacquer-resistant

Federal Standards FED-STD-H28 Screw Thread Standard for Federal Services FED-STD-795 Uniform Federal Accessibility Standard Federal Enterprise Architecture: The Business Reference Model – Version 2.0

Federal Enterprise Architecture Business Reference Model (BRM) Air Transportation Line of Business, Mode Delivery: Direct Services to Citizens and Civilian Operations, Access Control Architecture Performance Reference Model (PRM)

Presidential Directives HSPD-12 Homeland Security Presidential Directive 12: Policy for a

Common Identification Standard for Federal Employees and Contractors

National Institute of Science and Technology FIPS 201 current version

Federal Information Processing Standards Publication

Interagency Advisory Board PACS – Version 2.3 Technical Implementation Guidance: Smart Card Enabled

Physical Access Control Systems

International Standards Organization

ISO 7816 – 2004, 2011,

2013, 2014

Smart Card Standard Publish date dependent on section

ISO 14443 – 2008,

2010, 2011, 2012, 2013, Contactless Smart Cards Publish date dependent on section

FAA Standards FAA-STD-002g FAA Standard Engineering Drawing Preparation and

Support

FAA-STD-013 Quality Control Program Requirements FAA-STD-019e Lightning and Surge Protection, Grounding, Bonding, and

Shielding Requirements for Facilities and Electronic Equipment

FAA-STD-020 Transient Protection, Grounding, Bonding, and Shielding Requirements for Electronic Equipment

FAA-STD-021 Configuration Management (Contractor Requirements) FAA-STD-024 Content and Format Requirements for the Preparation of

Test and Evaluation Documentation

FAA-STD-028 Contract Training Programs

PAGE J-03-7

FAA-C-2454 Facility Site Preparation FAA-E-2013 Cable, Electrical Power, Exterior 600 to 15,000 volts

FAA Orders FAA Order 1370.121 FAA Information Security and Privacy Program and

Policy

FAA Order 1600.6E Facility Security Policy FAA Order 1600.69C FAA Facility Security Management Program FAA Order 1800.66 Configuration Management Policy FAA Order 3900.19B Occupational Safety and Health Program FAA Order 3900.57A Environmental and Occupational Safety and Health

(EOSH) Requirements in the Planning and Execution of Construction and Maintenance Activities at National Airspace System (NAS) Facilities

FAA Order 6000.25 Design and Construction of FAA Facilities FAA Order 6010.7B Joint Acceptance Inspection, Appendix 4 FAA Order 6030.20F Electrical Power Policy FAA Order 6950.2D Electrical Power Policy Implementation at National

Airspace System Facilities

FAA Order 6950.27 Power System Analyses: Load Flow Calculations, Short Circuit Analysis, Protective Device Coordination Studies, and ARC Flash Hazard Analysis

FAA Order 8040.4B Safety Risk Management Policy FAA Handbooks/Manuals

FAA Safety Management System Manual Version 4 FAA System Safety Handbook December 2000