Coordinate Measuring Machine Solicitation No. FA812521Q0029.pdf

Combined Synopsis Solicitation

(IAW FAR 12.603)

Solicitation Number: FA812521Q0029

COORDINATE MEASURING MACHINE

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This solicitation is being issued as a Request for Quotation (RFQ) IAW FAR Part 13.

This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2021-03, Defense Federal Acquisition Regulation Supplement Change Notice (DPN) 20210115, and Air Force Acquisition Circular (AFAC) 2019-1001.

The Air Force Sustainment Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma, intends to award one firm fixed price contract for the acquisition of items listed below. AFSC/PZIMA will select the quote that will provide the best value to the Government.

This is a competitive acquisition for Coordinate Measuring Machine used in Commodities Maintenance Group (CMXG) to perform dimensional measurements on parts overhauled by

CMXG.

The Air Force Sustainment Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma, intends to award one firm fixed price contract, for the acquisition of material listed below:

This is 100% Small Business Set-Aside

The NAICS Code is: 334513 and the Size Standard: 750

Contact Information:

Quotations are due by: 2:00 PM Central Standard Time (CST) on 22 March 2021. Contact the following for any additional questions regarding this solicitation:

Shelli Simmons Contract Specialist, Email: shelli.simmons@us.af.mil

Please email quotes to: Shelli.Simmons@us.af.mil

Contract Line Items (CLINs) NOTE: CLIN 0001 is solicited as Firm Fixed Price (FFP) CLIN 0002 is solicited as Firm Fixed Price (FFP)

CLIN ITEM

DESCRIPTION

TOTAL

QUANTITY

Unit of Issue

DELIVERY DATE and

INSTRUCTIONS

Coordinate Measuring Machine

EA

ARO: 30 Days

Training

EA

In accordance with the Statement of Work (SOW) mailto:shelli.simmons@us.af.mil mailto:Shelli.Simmons@us.af.mil

DESCRIPTION OF COMMODITY:

(1) Coordinate Measuring Machine The requested software descriptions/specifications are outlined below.

• A bridge style CMM, able to measure variety of parts to an accuracy of 1.5 + L/333 microns or better. Length measuring uncertainties guaranteed from 18 - 22°C.

• Minimum table measurement range of x=500mm, y=700mm, z=500mm.

• Reference/Probe Qualification sphere.

• Automatic Stylus Changer.

• Stylus Kit with multiple probes from 3mm diameter to 8 mm diameter.

• Option to add optical sensors.

• Air Dryer/Oil removal that supports a minimum of 10 CFM.

• Total footprint allocated for the installation of the CMM shall not exceed 72” by 72”.

• Room ceiling height is 102 inches. The ceiling is a drop ceiling, but the Government does not wish to raise the ceiling to accommodate a new CMM. However, if required, the Government will raise the ceiling tile directly over the final placement of the CMM.

The ceiling tile directly over the CMM can be raised a height of 18” for a total ceiling height of 120”. The access doorway for the room is 71 inches wide by 83 inches tall.

• System shall operate on 120 VAC, 1 phase, 60 hertz with amperage not to exceed 20 amps.

• Low pressure air at 150 psig not to exceed 20 cfm.

• The contractor shall deliver and perform on-site installation of the CMM at 3538 C.

Avenue, Tinker AFB, OK 73145 in Building 200, Room 118. The contractor will supply all transportation, rigging, forklift/crane, and labor necessary for offloading, transport and installation at permanent location.

• Operator Training for a minimum of 2 attendees (may be onsite, online or at contractor’s facility or combination thereof).

• Basic training - basic understanding of software and measurement capabilities of CMM and operating CMM for first time users.

• Advanced training - cover advance concepts beyond the basic training, such as importing CAD files for parts measurement, learning scanning concepts for analog scanning probes.

• Contractor must meet all requirements outlined in the Statement of Work (SOW).

DELIVERY INFORMATION:

FOB Destination to Tinker AFB, OK. Shipping must be included in price. Net 30.

The Contractor shall deliver to: Building 3538 C. Avenue, Tinker AFB, OK 73145.

POC: COMMODITY SURVIELLANCE TEAM

F3YCEB

OC ALC/OBCB

BLDG 3001 STAFF DR | DOOR G70 POST N68

TINKER AFB, OK73145-3052

405-582-5485 OCALC.OBWK.COMMODITIESSURVEILL@us.af.mil mailto:OCALC.OBWK.COMMODITIESSURVEILL@us.af.mil

TERMS AND CONDITIONS

Please note provisions by reference carry the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The full text of a clause may be accessed electronically at this/these address:

Regulations URLs: (Click on the appropriate regulation.)

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/dfars https://www.acquisition.gov/affars

Addendum to FAR 52.212-1 Instructions to Offerors -- Commercial Items General Information: The Government plans to issue a firm-fixed price (FFP) contract for (1) Coordinate Measuring Machine. This firm-fixed-price type contract is to award one contract for the acquisition. The Contracting Officer (CO) is the sole point of contact for this acquisition. Address any questions or concerns you may have to the CO. Written requests for clarification may be sent to the CO at the address located in block xvi

An Ombudsman has been appointed to hear concerns from interested vendors during the proposal development phase of this acquisition. The Ombudsman for this acquisition is AFSC/PZC. This does not diminish the authority of the program director or CO, but communicates vendor concerns, issues, disagreements and recommendations to the appropriate Government personnel. When requested, the Ombudsman shall maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of quotations; interested parties are invited to call AFSC/PZC at 405-736- 3273.

General Instructions: This acquisition will be conducted under the procedures of FAR Part 12 -- Commercial Items and FAR Part 13 -- Simplified Acquisition Procedures. This acquisition will utilize price as the only evaluated factor. Award will be made to the vendor with the lowest total evaluated price (TEP) and whose quote conforms to the solicitation requirements (to include all stated terms, conditions, representations, and certifications).

Vendors shall complete provisions/clauses as required. Vendors must complete the annual representations and certifications electronically via the System for Award Management (SAM) at https://www.sam.gov. After reviewing the SAM information, the vendor verifies by submission of their quotation that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items, are correct.

Tailored Instructions (FAR 52.212-1):

(a) North American Industry Classification System (NAICS) code and small business size standard.

The NAICS code and small business size standard for this acquisition appear in Block IV of the solicitation cover sheet of this solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations may be submitted on the solicitation, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotations must show--https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/dfars https://www.acquisition.gov/affars https://www.sam.gov/

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the vendor;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212- 3(b) for those representations and certifications that the vendor shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Reserved; and

(11) If the quotation is not submitted on a Standard Form (SF) 1449, Solicitation/Contract/Order for Commercial Items, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Reserved.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during pre-award testing.

(e) Multiple quotations. Vendors are encouraged to submit multiple quotations presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of quotations. We must receive your quotation via email by the time specified in this solicitation. We will not consider any quotation that we receive after the deadline unless we receive it before we issue a purchase order and considering it will not unduly delay our purchase. In case of an emergency that delays our operations and makes submission or receipt of your quotation impossible, we will extend the deadline by one working day.

(g) Issuance of purchase order. The Government intends to evaluate quotations and issue a purchase order without interchanges. Therefore, the vendor’s initial quotation should contain the vendor’s best https://www.acquisition.gov/sites/default/files/current/far/html/52_212_213.html#wp1179194 https://www.acquisition.gov/sites/default/files/current/far/html/52_212_213.html#wp1179194 https://www.acquisition.gov/sites/default/files/current/far/html/52_212_213.html#wp1179194 terms from a price and technical standpoint. However, the Government reserves the right to conduct interchanges with one, some, or all vendors if later determined by the Contracting Officer to be necessary.

The Government may waive informalities and minor irregularities in quotations received. The Government reserves the right to reject any or all quotations, if such action is in the public interest.

(h) Multiple purchase orders. The Government may issue purchase orders for any item or group of items of a quotation, unless the vendor qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit price(s) quoted, unless the vendor specifies otherwise in the quotation.

(i) Availability of requirements documents cited in the solicitation. If the descriptions in this solicitation refer to any Government specification, standard, or commercial item description, you may obtain a copy of any such documents from the places listed in FAR 52.212-1, paragraph (i).

(j) Unique Entity Identifier (UEI). Applies to all quotations submitted in response to solicitations that require the vendor to be registered in the System for Award Management (SAM) database. Place your UEI that identifies the vendor’s name and address in Block “DUNS” Also, if applicable, place your Electronic Funds Transfer (EFT) indicator in Block “DUNS”]. If you do not have a UEI, see FAR 52.212-1 paragraph (j) for instructions.

(k) Reserved.

(l) Reserved.

Addendum to FAR 52.212-2 -- Evaluation – Commercial Items

1.0 Basis for Contract Award:

This acquisition will be conducted under the procedures of FAR Part 12 -- Commercial Items and FAR Part 13 -- Simplified Acquisition Procedures. This acquisition will utilize price as the only evaluated factor. Award will be made to the vendor with the lowest total evaluated price (TEP) and whose quotation conforms to the solicitation requirements (to include all stated terms, conditions, representations, and certifications). The Government intends to award without interchanges. However, the Government reserves the right to conduct interchanges if determined necessary by the Contracting Officer (ref. FAR 52.212-2 Addendum, section 1.3).

1.1 Solicitation Requirements (Terms and Conditions)

Vendors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and Statement of WORK (SOW) requirements, in addition to the price factor. Failure to comply with the terms and conditions of the solicitation may result in the vendor being ineligible for award. Vendors must clearly identify any exception to the solicitation terms and conditions and must provide complete supporting rationale. The Government reserves the right to determine any such exceptions unacceptable, and the quotation, therefore, ineligible for award.

1.2 Number of Contracts to be awarded:

The Government intends to select one contractor for this acquisition. However, the Government reserves the right not to award a contract at all, depending on the quality of the quotation, prices submitted, and the availability of funds.

1.3 Interchanges

In accordance with FAR 1.102-2(c)(3) the Government shall exercise discretion, use sound business judgement, and comply with applicable laws and regulations during the course of this acquisition. The Government intends to award without interchanges, but reserves the right to conduct interchanges if necessary. Therefore, it is imperative that vendors submit their best terms initially. If during the evaluation of quotations it is determined to be in the best interest of the Government to conduct interchanges, the Contracting Officer may conduct interchanges with one, some, or all vendors before issuing any purchase order.

Interchanges are information sharing between the Government and vendors after receipt of quotations which can be conducted to address any aspect of the quotation. Interchanges may be oral or written.

Written interchanges take the form of Interchange Notices (IN)s. INs are used to accurately capture contemporaneous sharing of information. If interchanges are conducted, the Government may request final quotation revisions at the conclusion of interchanges.

2.0 Evaluation Factor:

The Government will evaluate for conformance concurrently for the three (3) lowest priced proposals. Should one of those three (3) proposals not be found conforming to the solicitation, the next one (1) lowest priced offeror will be reviewed for conformance. Then, price will be evaluated and the proposals will be listed from lowest to highest price based on the total evaluated price either initially or as a result of clarifications.

2.1. Factor 1 – Price

Price quotations will be evaluated as follows:

2.1.1 Completeness

Quotations will be reviewed for completeness. Incomplete quotes will be considered ineligible for award.

CONTRACTOR MUST PROVIDE A STATEMENT TO EXPLAIN HOW THEY ARE MEETING

THE TECHNICAL EVALUATION CRITERIA LISTED BELOW. A STATEMENT OF “I

CONCUR” OR “CONCUR” WILL NOT BE ACCEPTED AND COULD DEEM YOUR

PROPOSAL TECHNICALLY UNACCEPTABLE. THE WRITTEN STATEMENT IS

ESSENTIAL FOR YOUR QUOTE TO BE RESPONSIVE ND BE REFERED FOR TECHNICAL

REVIEW.

One (1) Coordinate Measuring Machine. This requirement must have the following specifications:

a. A bridge style CMM, able to measure variety of parts to an accuracy of 1.5 + L/333 microns or better. Length measuring uncertainties guaranteed from 18 - 22°C.

b. Minimum table measurement range of x=500mm, y=700mm, z=500mm.

c. Reference/Probe Qualification sphere.

d. Automatic Stylus Changer.

e. Stylus Kit with multiple probes from 3mm diameter to 8 mm diameter.

f. Option to add optical sensors.

g. Air Dryer/Oil removal that supports a minimum of 10 CFM.

h. Total footprint allocated for the installation of the CMM shall not exceed 72” by 72”.

i. Room ceiling height is 102 inches. The ceiling is a drop ceiling, but the Government does not wish to raise the ceiling to accommodate a new CMM. However, if required, the Government will raise the ceiling tile directly over the final placement of the CMM.

The ceiling tile directly over the CMM can be raised a height of 18” for a total ceiling height of 120”. The access doorway for the room is 71 inches wide by 83 inches tall.

j. System shall operate on 120 VAC, 1 phase, 60 hertz with amperage not to exceed 20 amps.

k. Low pressure air at 150 psig not to exceed 20 cfm.

l. The contractor shall deliver and perform on-site installation of the CMM at 3538 C.

Avenue, Tinker AFB, OK 73145 in Building 200, Room 118. The contractor will supply all transportation, rigging, forklift/crane, and labor necessary for offloading, transport and installation at permanent location.

m. Operator Training for a minimum of 2 attendees (may be onsite, online or at contractor’s facility or combination thereof).

n. Basic training - basic understanding of software and measurement capabilities of CMM and operating CMM for first time users.

o. Advanced training - cover advance concepts beyond the basic training, such as importing CAD files for parts measurement, learning scanning concepts for analog scanning probes.

p. Contractor must meet all requirements outlined in the Statement of Work (SOW).

2.1.2 Price Reasonableness

The proposed prices will be evaluated for reasonableness. Reasonableness must represent a price to the Government a prudent person would pay in the conduct of competitive business. Normally, price reasonableness is established through adequate price competition, but may also be determined through price analysis techniques as described in FAR 15.404-1(b)(2).

2.1.3 Price Realism

The Government intends to determine price realism based on adequate price competition. In the event the Government cannot determine price realism based on adequate price competition, the Government reserves the right to conduct a more detailed price realism evaluation using one or more of the price analysis techniques described in FAR 15.404-1(b)(2). The Government may also use other evaluation techniques, as needed. To be realistic, the proposed price must demonstrate an adequate understanding of the requirement. Quoted prices that are determined to be unrealistically low due to an inadequate understanding of the requirement will make the quotation ineligible for award.

2.1.4 Unbalanced Pricing

Vendors’ quotations will be reviewed for unbalanced pricing. The Government will evaluate any supporting information provided by the vendor explaining variances that appear unbalanced. Evaluated quotes that are determined to be unbalanced may be deemed ineligible for award by the Contracting

Officer if a determination is made that lack of balance poses an unacceptable risk to the Government.

Unbalanced pricing exists when, despite an acceptable total price, the price of one or more line items (including sub line items) is significantly over or understated as demonstrated by application of price analysis techniques, such that:

a) There is reasonable doubt the quote would result in the lowest overall cost to the

Government, even though it is the lowest priced quote; or

b) The quote is so grossly unbalanced; its acceptance would be tantamount to allowing an advanced payment.

2.1.5 Total Evaluated Price (TEP)

The TEP will be calculated as the sum of the total proposed prices for all separately priced line items (including sub line items). The total proposed price for each separately priced line item shall be calculated as the proposed unit price multiplied by the corresponding quantity.

The TEP will be used for evaluation purposes only.

The TEP will be calculated as the sum of the vendor’s proposed price for the entirety of this contract.

(End of provision)

52.212-3 - Offeror Representations and Certifications -- Commercial Item The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition.

52.212-4 - Addendum -- (a) The Contractor agrees that the supplies or services furnished under this contract shall be covered by the most favorable commercial warranties the Contractor gives to any customer for such supplies or services and that the rights and remedies provided herein are in addition to and do not limit any rights afforded to the Government by any other clause of this contract. (b) The Contractor shall provide a copy of the applicable commercial warranty with each item covered by such a warranty, at no additional cost to the Government. A copy of the warranty proposed shall be provided with the offer.

52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders— Commercial Items, applies to this acquisition.

The following clauses/provisions within 52.212-5 are included but not limited to:

52.204-10 - Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 - Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-6 - Notice of Total Small Business Set-Aside 52.219-28 - Post Award Small Business Program Representation

52.222-3 - Convict Labor 52.222-19 - Child Labor—Cooperation with Authorities and 52.222-21, Prohibition of Segregated Facilities 52.222-25- Affirmative Action Compliance 52.222-26 - Equal Opportunity 52.222-36 - Equal Opportunity for Workers With Disabilities 52.222-41 - Service Contract Labor Standards 52.222-42 - Statement of Equivalent Rates for Federal Hires 52.222-50 - Combating Trafficking in Persons 52.222-55 - Minimum Wages Under Executive Order 13658 52.225-3 - Buy American –Free Trade Agreements – Israeli Trade Act 52.225-13 - Restrictions on Certain Foreign Purchases 52.225-18 – Place of Manufacture 52.232-33 - Payments by Electronic Funds Transfer 52.237-2 - Protection of Government Buildings, Equipment, and Vegetation.

The following FAR clauses/provisions are included but not limited to:

52.203-19- Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7 - System for Award Management 52.204-13 - System for Award Management Maintenance 52.204-16 - Commercial and Government Entity Code Reporting 52.204-17 - Ownership or Control of Offeror 52.204-18 - Commercial and Government Entity Code Maintenance 52.204-19- Incorporation by Reference of Representations and Certifications 52.209-10- Prohibition on Contracting with Inverted Domestic Corporations 52.212-1 - Instructions to Offerors -- Commercial Items 52.219-1 - Small Business Program Representations Alternate I 52.222-22 - Previous Contract and Compliance Reports Relating to Iran—Representation and Certifications 52.232-33 - Payment by Electronic Funds Transfer-- System for Award Management 52.232-39 – Unenforceability of Unauthorized Obligations 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors 52.242-15 - Stop-Work Order 52.247-34 - F.o.b. – Destination 52.252-1 Solicitation Provisions incorporated By Reference 52.252-2 Clauses Incorporated by Reference 52.252-5 - Authorized Deviations in Provisions 52.252-6 - Authorized Deviations in Clauses 52.253-1 - Computer Generated Forms

The following DFARS clauses/provisions are included:

252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7003, Control of Government Personnel Work Product 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.209-7999 - Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law

252.211-7003 - Item Unique Identification and Valuation 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7001- Buy American and Balance Payment Program 252.225-7002 - Restrictions on food, clothing, fabrics, hand or measuring tools, and flags 252.225-7012- Preference for Certain Domestic Commodities 252.225-7048- Export- Controlled Items 252.232-7003 - Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 - Wide Area WorkFlow Payment Instructions 252.232-7010 Levies on Contract Payments 252.243-7001 - Pricing of Contract Modifications 252.244-7000, Subcontracts for Commercial Items 252.247-7023 Transportation of Supplies by Sea 252.247-7036 - Buy American—Free Trade Agreements—Balance of Payments Program, Alt. 1

The following AFFARS clauses/provisions are included:

5352.201-9101 Ombudsman 5352.223-9000 Elimination of Use of Class I Ozone Substances 5352.223-9001 Health and Safety on Government Installations 5352.242-9001 Contractor Access to Air Force Installations

The following Local clauses are included:

Contract Holidays Truck Entry Gate, Notice List of Attachments

Standard Commercial warranties apply.

CONTACT INFORMATION

Quotations are due by: 22 March 2021 at 2:00 p.m. Central Standard Time (CST). Contact the following individuals for any additional information regarding this solicitation:

Contracting Specialist:

Shelli Simmons via email: shelli.simmons@us.af.mil

Contracting Officer:

Carrie Brown at (405) 734-7863 or email: carrie.brown.8@us.af.mil

SPECIAL NOTE: Contractors must email quotes to:

Shelli.Simmons@us.af.mil

Attachments

Attachment 1 –Statement of Work (SOW) Attachment 2 – Item Description mailto:shelli.simmons@us.af.mil mailto:carrie.brown.8@us.af.mil mailto:Shelli.Simmons@us.af.mil

RESPONSE PAGE

RETURN THIS PAGE WITH THE COMPLETED INFORMATION AND AUTHORIZED

SIGNATURE. OFFEROR MAY PROVIDE COMPANY QUOTATION SHEET

INCONJUNCTION WITH THIS RESPONSE PAGE

1. OFFEROR INFORMATION

BUSINESS NAME:

STREET ADDRESS: CITY, STATE, ZIP:

CAGE CODE and DUNS:

BUSINESS WEB ADDRESS:

CONTACT PERSON:

TELEPHONE: FAX:

E-MAIL:

2. SUPPLIES/SERVICES AND PRICES/COST

CLIN

No

Item Description Quantity PRICE Delivery

0001 One (1) Coordinate Measuring Machine 1

Training

IAW Statement of

Work (SOW)

FOB Destination to Tinker AFB, OK 73145. Shipping must be included in price. Net 30.

The Contractor shall perform services in accordance with the SOW and Contract Form 1449.

F3YCEB

COMMODITY SURVEILLANCE TEAM

OC ALC/OBCB

BLDG 3001 STAFF DR | DOOR G70 POST N68

TINKER AFB, OK-73145

405-582-5485 OCALC.OBWK.COMMODITIESSURVEILL@us.af.mil

Total Proposed Price for all CLINs: $__________ mailto:OCALC.OBWK.COMMODITIESSURVEILL@us.af.mil

DISCOUNT TERMS:

NET 30 DAYS

DAYS REQUIRED FOR DELIVERY:

***Please provide delivery information above***

3. CERTIFICATION OF RESPONSE

Offeror’s Authorized Representative's Signature Date

Type or Print Name Position or Title

Contractor is Required to sign this document and return 1 copy to issuing office. Contractor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein. Contractor is required to provide commercial product literature for all items quoted above

52.204-17 - Ownership or Control of Offeror