Attachment C - Offeror Response Document.docx

DOCX document 38 KB Posted

Attached to
2022 Transit Bus Program Federal contract opportunity
Solicitation number
47QMCA21R0013
Issued by
GSA Federal Acquisition Service

About this file

This document contains a vendor response template and questions for a solicitation seeking proposals for transit buses. Offerors are asked to provide contact information, note any exceptions to terms and conditions, verify SAM representations and certifications, and designate points of contact. Regulations addressed include prohibitions on ozone-depleting substances and covered telecommunications equipment. Disclosures are requested regarding responsibility matters and place of performance. Offerors must indicate principal places of manufacture and production points. Responses are required regarding trade agreements and inspection locations. The solicitation number is 47QMCA21R0013 for GSA's 2022 Transit Bus Program, with an updated pre-proposal conference scheduled for September 2, 2021 to discuss requirements. Proposals are due via FedConnect and pricing via AutoBid per RFP instructions.

View the file

Other files for this federal contract opportunity

Other files attached to 2022 Transit Bus Program, newest first.
File Type Posted
PD - SIN 377G Heavy Duty Low Floor Transit Bus CHG-BEV 07.10.2024.docx DOCX document
PD - SIN 377B Heavy Duty Low Floor Transit Bus CNG 07.10.2024.docx DOCX document
PD - SIN 377K Heavy Duty Low Floor Transit Bus BEV 07.10.2024.docx DOCX document
47QMCA21R0013 FY22 Open Season 3 - Special Notice (letter) Rev.docx DOCX document
47QMCA21R0013 FY22 Open Season 3 - Special Notice (letter).pdf PDF
PD - SIN 377E Heavy Duty Low Floor Transit Bus BEV 08.03.2023.docx DOCX document
PD - SIN 377G Heavy Duty Low Floor Transit Bus CHG-BEV 08.03.2023.docx DOCX document
PD - SIN 377I Heavy Duty Low Floor Transit Bus BEV Zion Modified 10.13.2023.docx DOCX document
PD - SIN 377D Heavy Duty Low Floor Transit Bus BEV 08.03.2023.docx DOCX document
PD - SIN 377L Heavy Duty Low Floor Transit Bus BEV Amended 10.13.2023.docx DOCX document
47QMCA21R0013 FY23 Open Season 2 - Special Notice (letter).pdf PDF
888E SOP For New Offeror.pdf PDF
47QMCA21R0013 FY22 Open Season 1 - Special Notice (letter).pdf PDF
47QMCA21R0013 FY22 Open Season - NMY Cut-off Date Template.xlsx XLSX spreadsheet
PD - SIN 377F Heavy Duty Low Floor Transit Bus CHG-BEV AMENDED 11.09.2021.docx DOCX document
PD - SIN 377H Heavy Duty Low Floor Transit Bus BEV Zion AMENDED 11.09.2021.docx DOCX document
47QMCA21R0013 Amendment 0004 SF30 10_19_2021.pdf PDF
PD - SIN 377C Heavy Duty Low Floor Transit Bus HEV AMENDED 10.01.2021.docx DOCX document
PD - SIN 377E Heavy Duty Low Floor Transit Bus BEV AMENDED 10.01.2021.docx DOCX document
PD - SIN 377G Heavy Duty Low Floor Transit Bus CHG-BEV AMENDED 10.01.2021.docx DOCX document
PD - SIN 377H Heavy Duty Low Floor Transit Bus BEV Zion AMENDED 10.01.2021.docx DOCX document
PD - SIN 377I Heavy Duty Low Floor Transit Bus BEV Zion Amended 10.01.2021.docx DOCX document
PD - SIN 377A Heavy Duty Low Floor Transit Bus Diesel Amended 10.01.2021.docx DOCX document
PD - SIN 377D Heavy Duty Low Floor Transit Bus BEV AMENDED 10.01.2021.docx DOCX document
47QMCA21R0013 Amendment 0002 SF30 09_14_2021.pdf PDF
47QMCA21R0013 Amendment 0001 SF30 09_10_2021.pdf PDF
47QMCA21R0013 Solicitation Document 08_31_2021.pdf PDF
Attachment E1 - Technical Proposal Template.docx DOCX document
Attachment F1 - PD - SIN 377A Diesel 07.01.2021.pdf PDF
Attachment F2 - PD - SIN 377B CNG 07.01.2021.pdf PDF
Attachment F8 - PD - SIN 377H BEV Zion 40Ft 07.01.2021.pdf PDF
Attachment G - Schedule of Items (Excel).xlsx XLSX spreadsheet
Attachment H2 - Schedule of Items NOVA Bus.pdf PDF
Attachment H3 - Schedule of Items Eldorado National Co.pdf PDF
Attachment H4 - Schedule of Items Gillig LLC.pdf PDF
Attachment H6 - Schedule of Items Proterra.pdf PDF
Attachment J2 - Optional Equipment Combination Analysis.pdf PDF
Attachment L - Open Season Template.xlsx XLSX spreadsheet
Attachment M3 - DIT Process for 2022 Transit Bus Solicitation (Leasing).docx DOCX document
Attachment M4 - DIT Process for 2022 Transit Bus Solicitation (Purchasing).docx DOCX document
Attachment Q1 - Introduction to FedConnect.pdf PDF
Attachment Q3 - FedConnect Vendor Reference Guide.pdf PDF
Attachment D - Commercial Model_Subk Plan- Feb 2021.docx DOCX document
Attachment H1 - Schedule of Items New Flyer.pdf PDF
Attachment H5 - Schedule of Items BYD Coach and Bus LLC.pdf PDF
Attachment H7 - Schedule of Items - Item 888E.pdf PDF
Attachment J1 - Optional Equipment Analysis.pdf PDF
Attachment M2 - DIT Claim Form Template (Purchasing).pdf PDF
Attachment N - Weekly Vendor Status Reports Submission Requirements.docx DOCX document
Attachment O1 - Weekly Status Report Sample.xlsx XLSX spreadsheet
Show all 50

2022 Transit Bus Program has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

VENDOR RESPONSE DOCUMENT Solicitation 47QMCA21R0013

OFFEROR INFORMATION

Offeror’s Name:

Offeror’s DUNS: ( )

(DUNS+4)

Offeror’s TIN:

Offeror’s Address:

(PLEASE INCLUDE ZIP +4)

Offeror’s Phone:

Offeror’s Email:

Offeror’s Fax:

Exceptions to Terms and Conditions

Does the offeror take exception to any of the Terms and Conditions (Contract Clauses) presented in the Solicitation Document?

____ No

____ Yes (If ‘Yes’ is selected, the offeror must provide an attachment listing each contract clause and their exception. The exception the offeror is requesting will be negotiated with the GSA Contracting Official(s). Please title the attachment, ‘Exceptions to Terms and Conditions.’) Verification of SAM Reps and Certs (52.212-3)

The offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference:

____ Yes

____ No (If ‘No’ is selected, the offeror must submit an attachment listing the paragraph(s) which have changed and identify, after each paragraph, what has changed.) Please title the attachment ‘Exceptions to Reps and Certs - 52.212-3.’

C.11 CONTACT FOR CONTRACT ADMINISTRATION

Offerors are required to designate a person to be contacted for prompt contract administration.

NAME _________________________________________________________________

TITLE _________________________________________________________________

ADDRESS______________________________________________________________

ZIP CODE _______________________

EMAIL_________________________________________________________________

TELEPHONE NO. (_______)__________________________

FAX NO. (_____)______________________

C.11 AUTHORIZED NEGOTIATORS

The offeror shall, in the spaces provided below, fill in the names of all persons authorized to negotiate with the Government in connection with this request for proposals or quotations. (List the names, titles, telephone numbers and electronic mail address of the authorized negotiators.)

Damage-in-Transit Point of Contact

In accordance with Section C.17 – Damage-in-Transit Procedures, please enter your firm’s point of contact information for the Government to send notification of vehicles damaged while in transit:

NAME

TITLE

ADDRESS

ZIP CODE

TELEPHONE NO. (_______)

EMAIL ADDRESS:

REGULATION RESPONSES

Please enter response(s) as necessary for each regulation listed. (If attachments are required for a response, please indicate so and document the title of the attachment which contains the response):

D.6 52.223-11 OZONE-DEPLETING SUBSTANCES AND HIGH GLOBAL WARMING POTENTIAL HYDROFLUOROCARBONS (JUN 2016)

a) Definition. As used in this clause– “Global warming potential” means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of carbon dioxide. Carbon dioxide’s global warming potential is defined as 1.0.

“High global warming potential hydrofluorocarbons” means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

“Hydrofluorocarbons” means compounds that only contain hydrogen, fluorine, and carbon.

“Ozone-depleting substance,” means any substance the Environmental Protection Agency designates in 40 CFR Part 82 as—

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) The Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j (b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

Warning Contains (or manufactured with, if applicable) *_______, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

(c) Reporting. For equipment and appliances that normally each contain 50 or more pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons, the Contractor shall–

(1) Track on an annual basis, between October 1 and September 30, the amount in pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons contained in the equipment and appliances delivered to the Government under this contract by–

(i) Type of hydrofluorocarbon (e.g., HFC-134a, HFC-125, R-410A, R-404A, etc.);

(ii) Contract number; and

(iii) Equipment/appliance;

(2) Report that information to the Contracting Officer for FY16 and to www.sam.gov, for FY17 and after–

(i) Annually by November 30 of each year during contract performance; and

(ii) At the end of contract performance.

(d) The Contractor shall refer to EPA's SNAP program (available at http://www.epa.gov/snap) to identify alternatives. The SNAP list of alternatives is found at 40 CFR part 82 subpart G with supplemental tables available at http://www.epa.gov/snap.

E.1 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) Representation. The Offeror represents that—

(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

E.3 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (OCT 2018)

(a) Definitions. As used in this provision— “Administrative proceeding” means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceedings at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables.

“Federal contracts and grants with total value greater than $10,000,000” means—

(1) The total value of all current, active contracts and grants, including all priced options; and

(2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules).

“Principal” means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).

(b) The offeror |_| has |_| does not have current active Federal contracts and grants with total value greater than $10,000,000.

(c) If the offeror checked “has” in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:

(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions:

(i) In a criminal proceeding, a conviction.

(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.

(iii) In an administrative proceeding, a finding of fault and liability that results in–

(A) The payment of a monetary fine or penalty of $5,000 or more; or

(B) The payment of a reimbursement, restitution, or damages in excess of $100,000.

(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.

(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.

(d) The offeror shall post the information in paragraphs (c)(1)(i) through (c)(1)(iv) of this provision in FAPIIS as required through maintaining an active registration in the System for Award Management, which can be accessed viahttps://www.sam.gov (see 52.204-7).

E.4 52.212-3 ONLINE REPRESENTATIONS AND CERTIFICATIONS – COMMERCIAL ITEMS (JUN 2020)

**This information is to be completed in the System for Award Management (SAM)

E.5 52.215-6 PLACE OF PERFORMANCE (OCT 1997)

**This information is to be completed in the System for Award Management (SAM)

IBR 52.225-6 TRADE AGREEMENTS CERTIFICATE (MAY 2014)

** This information is to be completed in the System for Award Management (SAM).

E.8 52.225-18 PLACE OF MANUFACTURE (AUG 2018)

(a) Definitions. As used in this provision— “Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except-

(1) FPSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-

(1) |_| In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) |_| Outside the United States.

E.10 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998): 52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016)

(a) Definitions. As used in this provision– “Commercial and Government Entity (CAGE) code” means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it □ has or □ does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code: ____________________ Immediate owner legal name: ______________________ (Do not use a “doing business as” name) Is the immediate owner owned or controlled by another entity?: □ Yes or □ No.

(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code: ___________________ Highest-level owner legal name: ___________________ (Do not use a “doing business as” name)

E.11 552.216-73 ORDERING INFORMATION (AUG 2010) (ALTERNATE I—SEP 1999)

(a) In accordance with the Placement of Orders clause of this solicitation, the offeror elects to receive orders placed by GSA’s Federal Acquisition Service (FAS) by either |_| facsimile transmission or |_| computer-to-computer Electronic Data Interchange (EDI).

(b) An offeror electing to receive computer-to-computer EDI is requested to indicate below the name, address, and telephone number of the representative to be contacted regarding establishment of an EDI interface.

(c) An offeror electing to receive orders by facsimile transmission is requested to indicate below the telephone number(s) for facsimile transmission equipment where orders should be forwarded.

(d) Not applicable

(e) Offerors marketing through dealers are requested to indicate below whether those dealers will be participating in the proposed contract.

YES |_| NO |_|

If “yes” is checked, ordering information to be inserted above shall reflect that in addition to offeror’s name, address, and facsimile transmission telephone number, orders can be addressed to the offeror’s name, c/o nearest local dealer. In this event, two copies of a list of participating dealers shall accompany this offer, and shall also be included in Contractor’s Federal Supply Schedule pricelist.

E.12 E-FSS-514 PRODUCTION AND INSPECTION POINT(S) (JUN 1990)

(a)Production Point. Offeror shall insert, in the appropriate spaces provided below, the names of the manufacturers of the items offered and the address and telephone number of the facility(ies) at which the items will be manufactured or produced.
(b)Source Inspection Point. Offeror shall indicate, in the spaces provided below, the location(s) at which the supplies will be inspected or made available for inspection. If the addresses of the respective production and inspection points are identical, the offeror should insert "same" in the inspection point column.
SPECIALPRODCTN POINT INSPECTION POINT
ITEMNAME OFNAME, ADDRESS(If other than
NO(S).MANUFACTURE(Including County), andProduction Point)
TELEPHONE NUMBER
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________

NOTE: If additional space is needed, the offeror may furnish the requested information by an attachment to the offer. Please see Attachment K for formatting.

File details come from the government source that posted it. Updated .