(WMEC) 210' & 270' "A&B Class" Drydock, Multiple Task Order Contract

Contract Award Notice

Contract Award

Amendment A0013, 210' & 270' "A&B Class" (WMEC) Drydock.

Standard Form 1449, Page 1 of 71, Solicitation HSCG80-13-R-P45608, Block 7b, Telephone Number is corrected to read (757) 628-4645.

The United States Coast Guard Surface Forces Logistics Center (SFLC) intends to issue a Commercial Request for Proposal (RFP) that will result in the award of an Indefinite Delivery/Indefinite Quantity (IDIQ) Firm-Fixed-Price Multiple Award Task Order Contract (MATOC), for Dry Dock Maintenance and Repairs on 210' and 270' Medium Endurance Cutters, in the three (3) Regions: West Coast, Northeast, and Southeast. The West Coast Region will encompass the entire West Coast. The Northeast Region of the East Coast will encompass the states of Main, Massachusetts, New Jersey, and Virginia. The Southeast Region of the East Coast will encompass the states of Virginia, North Carolina, South Carolina, Florida, Mississippi and Texas. The Government intends to award multiple awards.

The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 15, Contracting by Negotiation.

This acquisition will be solicited in accordance with FAR Part 19.502-2 Total Small Business Set-Asides. This acquisition is limited to small businesses firms located within the regions; West Coast, Northeast, and Southeast.

The solicitation will be issued electronically, on or about October 10, 2012, via the Federal Business Opportunity web page at http://www.fbo.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFP release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.

The NAICS Code is 336611.

GEOGRAPHIC RESTRICTION: Geographic restriction may be implemented at the Task Order level due to operational requirements and/or urgent repairs. Any geographic restrictions will be identified at the Task Order level and implemented accordingly.

All work will be performed at the contractor's facility.

The performance period for this requirement includes one base year and four option years. From date of contract award through one year for the base period, and additional one year periods for each option exercised. The Performance Period for each individual requirement will be designated on each Task Order.

The scope of the acquisition for the WMEC 210 "A&B Class" will include, but is not limited to:

1. Hull Plating (Side Scan), Ultrasonic Testing
2. Hull Plating (U/W Body), Ultrasonic Testing
3. Hull Plating Freeboard, Preserve "100%" (A-Class)
4. Hull Plating Freeboard, Preserve "100%" (B-Class)
5. Hull Plating Freeboard, Preserve "Partial" (A-Class)
6. Hull Plating Freeboard, Preserve "Partial" (B-Class)
7. Perform Ultrasonic Thickness Measurements - Steel Plating
8. Stern Tube Interior Surfaces, Preserve 100% (A-Class)
9. Stern Tube Interior Surfaces, Preserve 100% (B-Class)
10.U/W Body, Preserve (100%)
11.U/W Body, Preserve (Partial-Condition A)
12.U/W Body, Preserve (Partial-Condition B)
13.U/W Body, Preserve (Partial-Condition C)
14.Hull and Structural Plating - ¼" to ¾" Steel Plate, Renew
15.Hull and Structural Plating - ¼" to ½" Aluminum Plate, Renew
16.Bilge (Machinery Space), Preserve "Partial"
17.Bilge (Non-Machinery Space), Preserve "Partial"
18.Appendages (U/W), Leak Test
19.Appendages (U/W), Internal, Preserve
20.Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair
21.Propulsion Shaft Strut Bearing Housings, Inspect, (A-Class)
22.Propulsion Shaft Strut Bearing Housings, Inspect, (B-Class)
23.Chain Locker, Clean and Inspect
24.Chain Locker, Preserve Partial
25.Chain Locker, Preserve "100%"
26.Tank (Forepeak Ballast), Clean and Inspect
27.Tank (Forepeak Ballast), Preserve "Partial"
28.Tank (Forepeak Ballast), Preserve "100%"
29.Tank Contents, Remove and Dispose
30.Tanks (Aviation Fuel Service and Stowage), Clean and Inspect
31.Tanks (Aviation Fuel Service and Stowage), Preserve "Partial"
32.Tanks (Aviation Fuel Service and Stowage), Preserve "100%"
33.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Clean and Inspect
34.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve "Partial"
35.Tanks (Lube Oil, Dirty Oil Hydraulic Oil), Preserve "100%"
36.Tanks (MP Fuel Storage, Service, and Overflow), Clean and Inspect
37.Tanks (MP Fuel Storage, Service, and Overflow), Preserve "Partial"
38.Tanks (MP Fuel Storage, Service and Overflow), Preserve "100%"
39.Tanks (Potable Water), Clean and Inspect
40.Tanks (Potable Water), Preserve "Partial"
41.Tanks (Potable Water), Preserve "100%"
42.Voids (Accessible), Preserve "Partial"
43.Voids (Accessible), Preserve "100%"
44.Voids (Non-Accessible), Leak Test
45.Voids (Non-Accessible), Preserve Internal Surfaces
46.Superstructure, Preserve "Partial"
47.Superstructure, Preserve "100"
48. Main Mast, Preserve "Partial"
49. Main Mast, Preserve "100%"
50.Propeller Shaft Sleeves, Renew (A-Class)
51.Propeller Shaft Sleeves, Renew (B-Class)
52.Propulsion Intermediate (Line) Shafts, Inspect (A-Class)
53. Propulsion Intermediate (Line) Shafts, Inspect (B-Class)
54.Propulsion Propeller (Tail) Shaft Coating, Renew (A-Class)
55.Propulsion Propeller (Tail) Shaft Coating, Renew (B-Class)
56.Propulsion Propeller (Tail) Shafts, Inspect In-Place (A-Class)
57.Propulsion Propeller (Tail) Shafts, Inspect In-Place (B-Class)
58. Propulsion Propeller Shaft, Renew, (A-Class)
59.Propulsion Propeller Shaft, Renew , (B-Class)
60.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew (A-Class)
61.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew (B-Class)
62.Propulsion Shafting, Optical or Laser Alignment Check (A-Class)
63.Propulsion Shafting, Optical or Laser Alignment Check (B-Class)
64.Propulsion Shafting, Straighten (A-Class)
65.Propulsion Shafting, Straighten (B-Class
66.Propulsion Shafting, Strain Gage Alignment Inspections
67.Propulsion Line Shaft Bearings (Internal), Check Clearances
68. Propulsion Shaft Bearings (External), Check Clearances (A-Class)
69. Propulsion Shaft Bearings (External), Check Clearances (B-Class)
70. Propulsion Shaft Bearings (External), Renew (A-Class)
71. Propulsion Shaft Bearings (External, Renew (B-Class)
72. Controllable Pitch Propeller (CPP) Hub Assembly, Renew (A-Class)
73.Controllable Pitch Propeller (CPP) Hub Assembly, Renew (B-Class)
74.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (A-Class)
75.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (B-Class)
76.Controllable Pitch Propeller (CPP) System, Inspect and Service (A-Class)
77.Controllable Pitch Propeller (CPP) System, Inspect and Service (B-Class)
78.Controllable Pitch Propeller (CPP), Clean and Inspect (A-Class)
79.Controllable Pitch Propeller (CPP), Clean and Inspect (B-Class
80.Fathometer Transducer, Renew
81.Doppler Speed Log Transducer, Renew
82.Fuel Piping, Renew
83.Sea Water Piping, Renew
84.Sea Strainers - Duplex (All Sizes), Overhaul
85.Sea Strainers - Simplex (All Sizes), Renew
86.Sea Valves and Waster Pieces, Overhaul or Renew
87.Sea Valves (Non-Skin Valves) and Waster Pieces, Overhaul or Renew
88.Fuel Manifold, Overhaul
89.Fuel Valves, Overhaul or Renew
90.Rudder Assembly; Remove, Inspect and Reinstall (A-Class)
91.Rudder Assembly; Remove, Inspect and Reinstall (B-Class)
92.Rudder Stock Bearings, Check Clearances (A-Class)
93. Rudder Stock Bearings, Check Clearances (B-Class)
94. Cathodic Protection (Zincs), Renew
95.Drydocking (A-Class)
96.Drydocking (B-Class)
97.Temporary Services, Provide
98.Sea Trial Performance, Provide Support
99.Additional Interference Removal and Reinstallation

The scope of the acquisition for the WMEC 270 "A&B Class" will include, but is not limited to:

1. Hull Plating (Side Scan), Ultrasonic Testing
2. Hull Plating (U/W Body), Ultrasonic Testing
3. Hull Plating Freeboard, Preserve ("100%")
4. Hull Plating Freeboard, Preserve ("Partial")
5. Perform Ultrasonic Thickness Measurements - Steel Plating
6. Stern Tube Interior Surfaces, Preserve 100% (A-Class)
7. Stern Tube Interior Surfaces Preserve 100% (B-Class)
8. U/W Body, Preserve ("100%")
9. U/W Body, Preserve ("Partial-Condition A")
10.U/W Body, Preserve ("Partial-Condition B")
11.U/W Body, Preserve ("Partial-Condition C")
12.Hull and Structural Plating - ¼" to ¾" Steel Plate, Renew
13.Hull and Structural Plating - ¼" to ½" Aluminum Plate, Renew
14.Bilge (Machinery Space), Preserve "Partial"
15.Bilge (Non-Machinery Space), Preserve "Partial"
16.Appendages (U/W), Leak Test
17.Appendages (U/W), Internal Preserve
18.Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair
19.Propulsion Shaft Fairwaters and Rope Guards, Renew
20.Propulsion Shaft Strut Bearing Housings, Inspect, (A-Class)
21.Propulsion Shaft Strut Bearing Housings, Inspect, (B-Class)
22.Chain Lockers, Clean and Inspect
23.Chain Locker, Preserve Partial
24.Chain Locker, Preserve 100%
25.Tank Contents, Remove and Dispose
26.Tanks (Aviation Fuel Service, Stowage, and Overflow), Clean and Inspect
27.Tanks (Aviation Fuel Service, Stowage, and Overflow), Preserve, "Partial"
28.Tanks (Aviation Fuel Service, Stowage, and Overflow), Preserve, "100%"
29.Tanks (Ballast), Clean and Inspect
30.Tanks (Ballast), Preserve "Partial"
31.Tanks (Ballast), Preserve "100%"
32.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Clean and Inspect
33.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve, "Partial"
34.Tanks (Lube Oil, Dirty Oil, Hydraulic Oil), Preserve, "100%"
35.Tanks (MP Fuel Service, Stowage, and Overflow), Clean and Inspect
36. Tanks (MP Fuel Service, Stowage, and Overflow), Preserve "Partial"
37.Tanks (MP Fuel Service, Stowage, and Overflow), Preserve "100%"
38.Tank (Potable Water Pneumatic), Clean and Inspect
39.Tanks (Potable Water), Preserve "Partial"
40.Tanks (Potable Water), Preserve "100%"
41.Voids (Accessible), Preserve "Partial"
42.Voids (Accessible), Preserve "100%"
43.Voids (Non-Accessible), Leak Test
44.Voids (Non-Accessible), Preserve Internal Surfaces
45.Superstructure, Preserve "Partial"
46.Superstructure, Preserve "100%"
47.Main Mast, Preserve "Partial"
48.Main Mast, Preserve "100%"
49.Propulsion Intermediate Shafts, Inspect In-Place, (A-Class)
50.Propulsion Intermediate Shafts, Inspect In-Place, (B-Class)
51.Propulsion Intermediate Shafts, Renew, (A-Class)
52.Propulsion Intermediate Shafts, Renew (B-Class)
53.Propulsion Propeller (Tail) Shaft Coating, Renew, (A-Class)
54.Propulsion Propeller (Tail) Shaft Coating, Renew, (B-Class)
55.Propulsion Propeller Shaft, Renew, (A-Class)
56.Propulsion Propeller Shaft, Renew, (B-Class)
57.Propulsion Propeller Shafts, Inspect In-Place (A-Class)
58.Propulsion Propeller Shafts, Inspect In-Place (B-Class)
59.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew
60.Propulsion Shaft Seal (Mechanical and Inflatable) Assemblies, Overhaul or Renew
61.Propulsion Shafting, Optical or Laser Alignment Check (A-Class)
62. Propulsion Shafting, Optical or Laser Alignment Check (B-Class)
63.Propulsion Shafting Straighten
64.Propulsion Shafting, Strain Gage Alignment Inspections
65.Propulsion Thrust Shaft, Remove, Inspect, and Reinstall (A-Class)
66.Propulsion Thrust Shaft, Renew, (A-Class)
67.Propulsion Thrust Shafts, Inspect In-Place, (A-Class)
68.Line Shaft (Pedestal) Bearing, Renew, (B-Class)
69.Line Shaft (Pedestal) Bearings, Check Clearances (B-Class)
70.Propulsion Shaft Bearings (External), Check Clearances, (A-Class)
71.Propulsion Shaft Bearings (External), Check Clearances, (B-Class)
72.Propulsion Shaft Bearings (External), Renew, (A-Class)
73.Propulsion Shaft Bearings (External), Renew, (B-Class)
74.Thrust Bearings, Check Clearances, (A-Class)
75.Thrust Bearing, Renew, (A-Class)
76.Controllable Pitch Propeller (CPP) Hub Assembly, Renew, (A-Class)
77.Controllable Pitch Propeller (CPP) Hub Assembly, Renew, (B-Class)
78.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (A-Class)
79.Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service (B-Class)
80.Controllable Pitch Propeller (CPP) System, Inspect and Service, (A-Class)
81.Controllable Pitch Propeller (CPP) System, Inspect and Service, (B-Class)
82.Controllable Pitch Propeller (CPP), Clean and Inspect (A-Class)
83.Controllable Pitch Propeller (CPP), Clean and Inspect (B-Class)
84.Fathometer Transducers, Renew
85.Doppler Speed Log Transducer, Renew
86.Sea Water Piping, Renew
87.Fuel Piping, Renew
88.Sea Strainers - Duplex (All Sizes), Overhaul
89.Sea Strainers - Simplex (All Sizes), Clean and Inspect
90.Sea Valves and Waster Pieces, Overhaul or Renew, (A-Class)
91.Sea Valves and Waster Pieces, Overhaul or Renew, (B-Class)
92.Sea Valves (Non-Skin Valves) and Waster Pieces, Overhaul or Renew
93.Fuel Manifold, Overhaul
94.Fuel Valves, Overhaul or Renew
95.Rudder Assembly; Remove, Inspect and Reinstall (A-Class)
96.Rudder Assembly; Remove, Inspect and Reinstall (B-Class)
97.Rudder Stock Bearings, Check Clearances (A-Class)
98.Rudder Stock Bearings, Check Clearance (B-Class)
99.Fin Stabilizer Shaft Sleeve, Renew, (A-Class)
100.Fin Stabilizer Shaft Sleeve, Renew, (B-Class)
101.Fin Stabilizer General Overhaul, (A-Class)
102.Fin Stabilizer General Overhaul, (B-Class)
103.Cathodic Protection (Zincs), Renew
104.Drydocking (A-Class)
105.Drydocking (B-Class)
106.Temporary Services, Provide
107.Sea Trial Performance, Provide Support
108.Additional Interference Removal and Reinstallation

A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail to: arlene.v.woodley@uscg.mil. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

For further information or questions regarding this solicitation, please contact Arlene Woodley at (757) 628-4645, or by email at arlene.v.woodley@uscg.mil.