TARC1_GW_and_1W_Renovation_Specifications.pdf

TARC1 Renovation Ground West and One West Final Design Submission

SPECIFICATIONS

Temple ARNG Readiness Center 111 S. George Mason Drive Arlington VA 22204

May 13, 2019

May

TARC1 Renovat i on Templ e ARNG Readi ness Cent er Gr ound West and One West 100% Desi gn Submi ssi on

PROJECT TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

01 33 00 SUBMI TTAL PROCEDURES

01 42 00 SOURCES FOR REFERENCE PUBLI CATI ONS

DI VI SI ON 06 - WOOD, PLASTI CS, AND COMPOSI TES

06 10 00 ROUGH CARPENTRY

06 41 16. 00 10 PLASTI C- LAMI NATE- CLAD ARCHI TECTURAL CABI NETS

DI VI SI ON 07 - THERMAL AND MOI STURE PROTECTI ON

07 92 00 JOI NT SEALANTS

DI VI SI ON 08 - OPENI NGS

08 51 13 ALUMI NUM WI NDOWS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

DI VI SI ON 09 - FI NI SHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 51 00 ACOUSTI CAL CEI LI NGS

09 65 00 RESI LI ENT FLOORI NG

09 68 00 CARPETING

09 90 00 PAI NTS AND COATI NGS

DI VI SI ON 10 - SPECI ALTI ES

10 14 00. 20 I NTERI OR SI GNAGE

10 26 00 WALL AND DOOR PROTECTI ON

10 44 16 FI RE EXTI NGUI SHERS

DI VI SI ON 12 - FURNI SHI NGS

12 36 00 COUNTERTOPS

DI VI SI ON 21 - FI RE SUPPRESSI ON

21 13 13. 00 10 WET PI PE SPRI NKLER SYSTEM, FI RE PROTECTI ON

DI VI SI ON 22 - PLUMBI NG

22 00 00 PLUMBI NG, GENERAL PURPOSE

22 07 19 PLUMBI NG PI PI NG I NSULATI ON

DI VI SI ON 23 - HEATI NG, VENTI LATI NG, AND AI R CONDI TI ONI NG ( HVAC)

23 00 00 AI R SUPPLY, DI STRI BUTI ON, VENTI LATI ON, AND EXHAUST SYSTEMS

23 05 93 TESTI NG, ADJUSTI NG, AND BALANCI NG FOR HVAC

23 07 00 THERMAL I NSULATI ON FOR MECHANI CAL SYSTEMS

DI VI SI ON 26 - ELECTRI CAL

26 00 00. 00 20 BASI C ELECTRI CAL MATERI ALS AND METHODS

PROJECT TABLE OF CONTENTS Page 1 Apr i l 9, 2019May 13,May 13, Final

26 05 19. 10 10 I NSULATED WI RE AND CABLE

26 05 71. 00 40 LOW VOLTAGE OVERCURRENT PROTECTI VE DEVI CES

26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM

26 51 00 I NTERI OR LI GHTI NG

DI VI SI ON 28 - ELECTRONI C SAFETY AND SECURI TY

28 31 76 I NTERI OR FI RE ALARM AND MASS NOTI FI CATI ON SYSTEM

- - End of Pr oj ect Tabl e of Cont ent s - -

PROJECT TABLE OF CONTENTS Page 2

SECTI ON 01 33 00

SUBMI TTAL PROCEDURES

08/18

PART 1 GENERAL

1. 1 SUMMARY

1. 1. 1 Submi t t al I nf or mat i on

The Cont r act i ng Of f i cer may r equest submi t t al s i n addi t i on t o t hose speci f i ed when deemed necessar y t o adequat el y descr i be t he wor k cover ed i n t he r espect i ve sect i ons. Each submi t t al i s t o be compl et e and i n suf f i c i ent det ai l t o al l ow r eady det er mi nat i on of compl i ance wi t h cont r act requirements.

Uni t s of wei ght s and measur es used on al l submi t t al s ar e t o be t he same as t hose used i n t he cont r act dr awi ngs.

1. 1. 2 Pr oj ect Type

The Cont r act or ' s Qual i t y Cont r ol ( CQC) Syst em Manager ar e t o check and appr ove al l i t ems bef or e submi t t al and st amp, s i gn, and dat e i ndi cat i ng act i on t aken. Pr oposed devi at i ons f r om t he cont r act r equi r ement s ar e t o be c l ear l y i dent i f i ed. I ncl ude wi t hi n submi t t al s i t ems such as:

Cont r act or ' s, manuf act ur er ' s, or f abr i cat or ' s dr awi ngs; descr i pt i ve l i t er at ur e i ncl udi ng ( but not l i mi t ed t o) cat al og cut s, di agr ams, oper at i ng char t s or cur ves; t est r epor t s; t est cyl i nder s; sampl es; O&M manual s ( i ncl udi ng par t s l i s t ) ; cer t i f i cat i ons; war r ant i es; and ot her such r equi r ed submittals.

The Cont r act or and t he Desi gner of Recor d ( DOR) , i f appl i cabl e, ar e t o check and appr ove al l i t ems bef or e submi t t al and st amp, s i gn, and dat e i ndi cat i ng act i on t aken. Pr oposed devi at i ons f r om t he cont r act r equi r ement s ar e t o be c l ear l y i dent i f i ed. I ncl ude wi t hi n submi t t al s i t ems such as: Cont r act or ' s, manuf act ur er ' s, or f abr i cat or ' s dr awi ngs;

descr i pt i ve l i t er at ur e i ncl udi ng ( but not l i mi t ed t o) cat al og cut s, di agr ams, oper at i ng char t s or cur ves; t est r epor t s; t est cyl i nder s;

sampl es; O&M manual s ( i ncl udi ng par t s l i s t ) ; cer t i f i cat i ons; war r ant i es;

and ot her such r equi r ed submi t t al s.

1. 1. 3 Submi si on of Submi t t al s

Schedul e and pr ovi de submi t t al s r equi r i ng Gover nment appr oval bef or e acqui r i ng t he mat er i al or equi pment cover ed t her eby. Pi ck up and di spose of sampl es not i ncor por at ed i nt o t he wor k i n accor dance wi t h manuf act ur er ' s Saf et y Dat a Sheet s ( SDS) and i n compl i ance wi t h exi st i ng l aws and regulations.

1. 2 DEFINITIONS

1. 2. 1 Submi t t al Descr i pt i ons ( SD)

Submi t t al r equi r ement s ar e speci f i ed i n t he t echni cal sect i ons. Exampl es and descr i pt i ons of submi t t al s i dent i f i ed by t he Submi t t al Descr i pt i on ( SD) number s and t i t l es f ol l ow:

SECTI ON 01 33 00 Page 1

SD- 01 Pr econst r uct i on Submi t t al s

Submi t t al s t hat ar e r equi r ed pr i or t o or commenci ng wi t h t he st ar t of wor k on s i t e. Submi t t al s t hat ar e r equi r ed pr i or t o or at t he st ar t of const r uct i on ( wor k) or t he next maj or phase of t he const r uct i on on a mul t i phase cont r act .

Pr econst r uct i on Submi t t al s i ncl ude schedul es and a t abul ar l i s t of l ocat i ons, f eat ur es, and ot her per t i nent i nf or mat i on r egar di ng pr oduct s, mat er i al s, equi pment , or component s t o be used i n t he wor k.

Cer t i f i cat es Of I nsur ance

Sur et y Bonds

Li st Of Pr oposed Subcont r act or s

Li st Of Pr oposed Pr oduct s

Basel i ne Net wor k Anal ysi s Schedul e ( NAS)

Submi t t al Regi st er

Schedul e Of Pr i ces Or Ear ned Val ue Repor t

Acci dent Pr event i on Pl anHeal t h And Saf et y Pl an

Wor k Pl an

Qual i t y Cont r ol ( QC) pl an

Envi r onment al Pr ot ect i on Pl an

SD- 02 Shop Dr awi ngs

Dr awi ngs, di agr ams and schedul es speci f i cal l y pr epar ed t o i l l ust r at e some por t i on of t he wor k.

Di agr ams and i nst r uct i ons f r om a manuf act ur er or f abr i cat or f or use i n pr oduci ng t he pr oduct and as ai ds t o t he Cont r act or f or i nt egr at i ng t he pr oduct or syst em i nt o t he pr oj ect .

Dr awi ngs pr epar ed by or f or t he Cont r act or t o show how mul t i pl e syst ems and i nt er di sci pl i nar y wor k wi l l be coor di nat ed.

SD- 03 Pr oduct Dat a

Cat al og cut s, i l l ust r at i ons, schedul es, di agr ams, per f or mance char t s, i nst r uct i ons and br ochur es i l l ust r at i ng s i ze, physi cal appear ance and ot her char act er i st i cs of mat er i al s, syst ems or equi pment f or some por t i on of t he wor k.

Sampl es of war r ant y l anguage when t he cont r act r equi r es ext ended pr oduct war r ant i es.

SD- 04 Sampl es

Fabr i cat ed or unf abr i cat ed physi cal exampl es of mat er i al s, equi pment or wor kmanshi p t hat i l l ust r at e f unct i onal and aest het i c char act er i st i cs of

SECTI ON 01 33 00 Page 2 a mat er i al or pr oduct and est abl i sh st andar ds by whi ch t he wor k can be judged.

Col or sampl es f r om t he manuf act ur er ' s st andar d l i ne ( or cust om col or sampl es i f speci f i ed) t o be used i n sel ect i ng or appr ovi ng col or s f or t he pr oj ect .

Fi el d sampl es and mock- ups const r uct ed on t he pr oj ect s i t e est abl i sh st andar ds ensur i ng wor k can be j udged. I ncl udes assembl i es or por t i ons of assembl i es t hat ar e t o be i ncor por at ed i nt o t he pr oj ect and t hose t hat wi l l be r emoved at concl usi on of t he wor k.

SD- 05 Desi gn Dat a

Desi gn cal cul at i ons, mi x desi gns, anal yses or ot her dat a per t ai ni ng t o a par t of wor k.

Desi gn submi t t al s, desi gn subst ant i at i on submi t t al s and ext ensi ons of desi gn submi t t al s.

SD- 06 Test Repor t s

Repor t s i gned by aut hor i zed of f i c i al of t est i ng l abor at or y t hat a mat er i al , pr oduct or syst em i dent i cal t o t he mat er i al , pr oduct or syst em t o be pr ovi ded has been t est ed i n accor d wi t h speci f i ed r equi r ement s. Unl ess speci f i ed i n anot her sect i on, t est i ng must have been wi t hi n t hr ee year s of dat e of cont r act awar d f or t he pr oj ect .

Repor t t hat i ncl udes f i ndi ngs of a t est r equi r ed t o be per f or med on an act ual por t i on of t he wor k or pr ot ot ype pr epar ed f or t he pr oj ect bef or e shi pment t o j ob s i t e.

Repor t t hat i ncl udes f i ndi ng of a t est made at t he j ob s i t e or on sampl e t aken f r om t he j ob s i t e, on por t i on of wor k dur i ng or af t er installation.

I nvest i gat i on r epor t s

Dai l y l ogs and checkl i st s

Fi nal accept ance t est and oper at i onal t est pr ocedur e

SD- 07 Cer t i f i cat es

St at ement s pr i nt ed on t he manuf act ur er ' s l et t er head and si gned by r esponsi bl e of f i c i al s of manuf act ur er of pr oduct , syst em or mat er i al at t est i ng t hat t he pr oduct , syst em, or mat er i al meet s speci f i cat i on r equi r ement s. Must be dat ed af t er awar d of pr oj ect cont r act and cl ear l y name t he pr oj ect .

Document r equi r ed of Cont r act or , or of a manuf act ur er , suppl i er , i nst al l er or Subcont r act or t hr ough Cont r act or . The document pur pose i s t o f ur t her pr omot e t he or der l y pr ogr essi on of a por t i on of t he wor k by document i ng pr ocedur es, accept abi l i t y of met hods, or per sonnel qualifications.

Conf i ned space ent r y per mi t s

SECTI ON 01 33 00 Page 3

Text of post ed oper at i ng i nst r uct i ons

SD- 08 Manuf act ur er ' s I nst r uct i ons

Pr epr i nt ed mat er i al descr i bi ng i nst al l at i on of a pr oduct , syst em or mat er i al , i ncl udi ng speci al not i ces and ( SDS) concer ni ng i mpedances, hazar ds and saf et y pr ecaut i ons.

SD- 10 Oper at i on and Mai nt enance Dat a

Dat a pr ovi ded by t he manuf act ur er , or t he syst em pr ovi der , i ncl udi ng manuf act ur er ' s hel p and pr oduct l i ne document at i on, necessar y t o mai nt ai n and i nst al l equi pment , f or oper at i ng and mai nt enance use by f aci l i t y per sonnel .

Dat a r equi r ed by oper at i ng and mai nt enance per sonnel f or t he saf e and ef f i c i ent oper at i on, mai nt enance and r epai r of t he i t em.

Dat a i ncor por at ed i n an oper at i ons and mai nt enance manual or cont r ol system.

SD- 11 Cl oseout Submi t t al s

Document at i on t o r ecor d compl i ance wi t h t echni cal or admi ni st r at i ve r equi r ement s or t o est abl i sh an admi ni st r at i ve mechani sm.

Submi t t al s r equi r ed f or Gui di ng Pr i nci pl e Val i dat i on ( GPV) or Thi r d Par t y Cer t i f i cat i on ( TPC) .

Speci al r equi r ement s necessar y t o pr oper l y c l ose out a const r uct i on cont r act . For exampl e, Recor d Dr awi ngs and as- bui l t dr awi ngs. Al so, submi t t al r equi r ement s necessar y t o pr oper l y c l ose out a maj or phase of const r uct i on on a mul t i - phase cont r act .

1. 2. 2 Appr ovi ng Aut hor i t y

Of f i ce or desi gnat ed per son aut hor i zed t o appr ove t he submi t t al .

1. 2. 3 Work

As used i n t hi s sect i on, on- si t e and of f - s i t e const r uct i on r equi r ed by cont r act document s, i ncl udi ng l abor necessar y t o pr oduce submi t t al s , const r uct i on, mat er i al s, pr oduct s, equi pment , and syst ems i ncor por at ed or t o be i ncor por at ed i n such const r uct i on. I n except i on, excl udes wor k t o pr oduce SD- 01 submi t t al s.

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y Not ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h t hi s sect i on.

SD- 01 Pr econst r uct i on Submi t t al s

Submi t t al Regi st er ; G

SECTI ON 01 33 00 Page 4

1. 4 SUBMI TTAL CLASSI FI CATI ON

1. 4. 1 Gover nment Appr oved ( G)

Gover nment appr oval i s r equi r ed f or ext ensi ons of desi gn, cr i t i cal mat er i al s, var i at i ons, equi pment whose compat i bi l i t y wi t h t he ent i r e syst em must be checked, and ot her i t ems as desi gnat ed by t he Gover nment .

Gover nment appr oval i s r equi r ed f or any var i at i ons f r om t he Sol i c i t at i on or t he Accept ed Pr oposal and f or ot her i t ems as desi gnat ed by t he Gover nment .

Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, submi t t al s ar e consi der ed t o be " shop dr awi ngs. "

1. 4. 2 Desi gn- Bui l d Submi t t al Cl assi f i cat i ons

1. 4. 2. 1 Desi gner of Recor d Appr oved ( DA)

Desi gner of Recor d ( DOR) appr oval i s r equi r ed f or ext ensi ons of desi gn;

cr i t i cal mat er i al s; any var i at i ons f r om t he Sol i c i t at i on, t he Accept ed Pr oposal , or t he compl et ed desi gn; equi pment whose compat i bi l i t y wi t h t he ent i r e syst em must be checked; and ot her i t ems as desi gnat ed by t he Cont r act i ng Of f i cer . Pr ovi de t he Gover nment wi t h t he number of copi es desi gnat ed her ei naf t er of al l DOR appr oved submi t t al s. The Gover nment may r evi ew any or al l Desi gner of Recor d appr oved submi t t al s f or conf or mance wi t h t he Sol i c i t at i on, t he Accept ed Pr oposal , and t he compl et ed desi gn.

The Gover nment wi l l r evi ew al l submi t t al s desi gnat ed as var yi ng f r om t he Sol i c i t at i on or Accept ed Pr oposal , as descr i bed bel ow. Pr ovi de desi gn submi t t al s i n accor dance wi t h Sect i on 01 33 16. 00 10 DESI GN DATA ( DESI GN AFTER AWARD) . Gener al l y, l i s t desi gn submi t t al s under SD- 05 Desi gn Dat a.

1. 4. 2. 2 Gover nment Conf or mance Revi ew of Desi gn ( CR)

The Gover nment wi l l r evi ew al l i nt er medi at e and f i nal desi gn submi t t al s f or conf or mance wi t h t he t echni cal r equi r ement s of t he Sol i c i t at i on. Sect i on 01 33 16. 00 10 DESI GN DATA ( DESI GN AFTER AWARD) cover s t he desi gn submi t t al and r evi ew pr ocess i n det ai l . Revi ew wi l l be onl y f or conf or mance wi t h t he appl i cabl e codes, st andar ds, and cont r act r equi r ement s. Desi gn dat a i ncl udes t he desi gn document s descr i bed i n Sect i on 01 33 16. 00 10 DESI GN

DATA ( DESI GN AFTER AWARD) .

1. 4. 2. 3 Desi gner of Recor d Appr oved/ Gover nment Conf or mance Revi ew ( DA/ CR)

1. 4. 2. 3. 1 Var i at i ons f r om t he Accept ed Desi gn

DOR appr oval and t he Gover nment ' s concur r ence ar e r equi r ed f or any pr oposed var i at i on f r om t he accept ed desi gn t hat st i l l compl i es wi t h t he cont r act bef or e t he Cont r act or i s aut hor i zed t o pr oceed wi t h mat er i al acqui s i t i on or i nst al l at i on. I f necessar y t o f aci l i t at e t he pr oj ect schedul e, bef or e of f i cal submi ssi on t o t he Gover nment , t he Cont r act or and t he DOR may di scuss wi t h t he Cont r act i ng Of f i cer ' s Repr esent at i ve a submi t t al pr oposi ng a var i at i on. However , t he Gover nment r eser ves t he r i ght t o r evi ew t he submi t t al bef or e pr ovi di ng an opi ni on. I n any case, t he Gover nment wi l l not f or mal l y agr ee t o or pr ovi de a pr el i mi nar y opi ni on on any var i at i on wi t hout t he DOR' s appr oval or r ecommended appr oval . The Gover nment r eser ves t he r i ght t o r ej ect any desi gn, var i at i on t hat may af f ect f ur ni t ur e, f ur ni shi ngs, equi pment sel ect i ons, or oper at i onal deci s i ons t hat wer e made, based on t he r evi ewed and concur r ed desi gn.

SECTI ON 01 33 00 Page 5

1. 4. 2. 3. 2 Substitutions

Unl ess pr ohi bi t ed or ot her wi se pr ovi ded f or el sewher e i n t he cont r act , wher e t he Accept ed Pr oposal named pr oduct s, syst ems, mat er i al s or equi pment by manuf act ur er , br and name, model number , or ot her speci f i c i dent i f i cat i on, and t he Cont r act or desi r es t o subst i t ut e a manuf act ur er or model af t er awar d, submi t a r equest ed subst i t ut i on f or Gover nment concur r ence. I ncl ude subst ant i at i on, t hr ough i dent i f y i ng i nf or mat i on and t he DOR' s appr oval , t hat t he subst i t ut e meet s t he cont r act r equi r ement s and t hat i t i s equal i n f unct i on, per f or mance, qual i t y , and sal i ent f eat ur es t o t hat i n t he accept ed cont r act pr oposal . I f t he cont r act ot her wi se pr ohi bi t s subst i t ut i ons of equal named pr oduct s, syst ems, mat er i al s or equi pment by manuf act ur er , br and name, m, odel number or ot her speci f i c i dent i f i cat i on, t he r equest i s consi der ed a " var i at i on" t o t he cont r act .

Var i at i ons ar e di scussed bel ow i n par agr aphs: " DESI GNER OF RECORD APPROVED/ GOVERNMENT APPROVED" and VARI ATI ONS.

1. 4. 2. 4 Desi gner of Recor d Appr oved/ Gover nment Appr oved ( DA/ GA)

I n addi t i on t o t he above- st at ed r equi r ement s f or pr oposed var i at i ons t o t he accept ed desi gn, bot h DOR and Gover nment Appr oval and, wher e appl i cabl e, a cont r act modi f i cat i on ar e r equi r ed bef or e t he Cont r act or i s aut hor i zed t o pr oceed wi t h mat er i al acqui s i t i on or i nst al l at i on f or any pr oposed var i at i on t o t he cont r act ( t he Sol i c i t at i on or t he Accept ed Pr oposal ) , t hat const i t ut es a change t o t he cont r act t er ms. The Gover nment r eser ves t he r i ght t o accept or r ej ect any such pr oposed var i at i on.

1. 4. 3 For I nf or mat i on Onl y

Submi t t al s not r equi r i ng Gover nment appr oval wi l l be f or i nf or mat i on onl y.

For Desi gn- bui l d const r uct i on al l submi t t al s not r equi r i ng DOR or Gover nment appr oval wi l l be f or i nf or mat i on onl y. Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, t hey ar e not consi der ed t o be " shop dr awi ngs. "

1. 4. 4 Sust ai nabi l i t y Repor t i ng Submi t t al s ( S)

Submi t t al s f or Gui di ng Pr i nci pl e Val i dat i on ( GPV) or Thi r d Par t y Cer t i f i cat i on ( TPC) ar e i ndi cat ed wi t h an " S" desi gnat i on. These submi t t al s ar e f or i nf or mat i on onl y and f or use as speci f i ed i n Sect i on

01 33 29 SUSTAI NABI LI TY REPORTI NG.

Schedul e submi t t al s f or t hese i t ems t hr oughout t he cour se of const r uct i on as pr ovi ded; do not wai t unt i l c l oseout .

1. 5 PREPARATION

1. 5. 1 Tr ansmi t t al For m

Tr ansmi t each submi t t al , except sampl e i nst al l at i ons and sampl e panel s t o t he of f i ce of t he appr ovi ng aut hor i t y usi ng t he t r ansmi t t al f or m pr escr i bed by t he Cont r act i ng Of f i cer . I ncl ude al l i nf or mat i on pr escr i bed by t he t r ansmi t t al f or m and r equi r ed i n par agr aph I DENTI FYI NG SUBMI TTALS. Use t he submi t t al t r ansmi t t al f or ms t o r ecor d act i ons r egar di ng sampl es.

Use t he ENG For m 4025- R t r ansmi t t al f or m f or submi t t i ng bot h Gover nment - appr oved and i nf or mat i on- onl y submi t t al s. Submi t i n accor dance

SECTI ON 01 33 00 Page 6 wi t h t he i nst r uct i ons on t he r ever se s i de of t he f or m. These f or ms [ wi l l be f ur ni shed t o t he Cont r act or ] [ ar e i ncl uded i n t he RMS CM sof t war e t hat t he Cont r act or i s r equi r ed t o use f or t hi s cont r act ] . Pr oper l y compl et e t hi s f or m by f i l l i ng out al l t he headi ng bl ank spaces and i dent i f y i ng each i t em submi t t ed. Exer ci se speci al car e t o ensur e pr oper l i s t i ng of t he speci f i cat i on par agr aph and sheet number of t he cont r act dr awi ngs per t i nent t o t he dat a submi t t ed f or each i t em.

1. 5. 2 I dent i f y i ng Submi t t al s

The Cont r act or ' s [ Qual i t y Cont r ol Manager ] [ appr ovi ng aut hor i t y] must pr epar e, r evi ew and st amp submi t t al s, i ncl udi ng t hose pr ovi ded by a subcont r act or , bef or e submi t t al t o t he Gover nment .

I dent i f y submi t t al s, except sampl e i nst al l at i ons and sampl e panel s, wi t h t he f ol l owi ng i nf or mat i on per manent l y adher ed t o or not ed on each separ at e component of each submi t t al and not ed on t r ansmi t t al f or m. Mar k each copy of each submi t t al i dent i cal l y , wi t h t he f ol l owi ng:

a. Pr oj ect t i t l e and l ocat i on

b. Const r uct i on cont r act number

c. Dat es of t he dr awi ngs and r evi s i ons

d. Name, addr ess, and t el ephone number of Subcont r act or , suppl i er , manuf act ur er , and any ot her Subcont r act or associ at ed wi t h t he submi t t al .

e. Sect i on number of t he speci f i cat i on by whi ch submi t t al i s r equi r ed f . Submi t t al descr i pt i on ( SD) number of each component of submi t t al

g. For a r esubmi ssi on, add al phabet i c suf f i x on submi t t al descr i pt i on, f or exampl e, submi t t al 18 woul d become 18A, t o i ndi cat e r esubmi ssi on

h. Pr oduct i dent i f i cat i on and l ocat i on i n pr oj ect .

1. 5. 3 Submi t t al For mat

1. 5. 3. 1 For mat of SD- 01 Pr econst r uct i on Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect , or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval st amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

1. 5. 3. 2 For mat f or SD- 02 Shop Dr awi ngs

Pr ovi de shop dr awi ngs not l ess t han 8 1/ 2 by 11 i nches nor mor e t han 30 by 42 i nches, except f or f ul l - s i ze pat t er ns or t empl at es. Pr epar e dr awi ngs t o accur at e s i ze, wi t h scal e i ndi cat ed, unl ess anot her f or m i s r equi r ed.

Ensur e dr awi ngs ar e sui t abl e f or r epr oduct i on and of a qual i t y t o pr oduce cl ear , di st i nct l i nes and l et t er s, wi t h dar k l i nes on a whi t e backgr ound.

a. I ncl ude t he namepl at e dat a, s i ze, and capaci t y on dr awi ngs. Al so i ncl ude appl i cabl e f eder al , mi l i t ar y, i ndust r y, and t echni cal soci et y publ i cat i on r ef er ences.

SECTI ON 01 33 00 Page 7

b. Di mensi on dr awi ngs, except di agr ams and schemat i c dr awi ngs. Pr epar e dr awi ngs demonst r at i ng i nt er f ace wi t h ot her t r ades t o scal e. Use t he same uni t of measur e f or shop dr awi ngs as i ndi cat ed on t he cont r act dr awi ngs. I dent i f y mat er i al s and pr oduct s f or wor k shown.

Pr esent shop dr awi ngs s i zed 8 1/ 2 by 11 i nches as par t of t he bound vol ume f or submi t t al s. Pr esent l ar ger dr awi ngs i n set s. Submi t an el ect r oni c copy of dr awi ngs i n PDF f or mat .

1. 5. 3. 2. 1 Dr awi ng I dent i f i cat i on

I ncl ude on each dr awi ng t he dr awi ng t i t l e, number , dat e, and r evi s i on number s and dat es, i n addi t i on t o i nf or mat i on r equi r ed i n par agr aph

I DENTI FYI NG SUBMI TTALS.

Number dr awi ngs i n a l ogi cal sequence. Each dr awi ng i s t o bear t he number of t he submi t t al i n a uni f or m l ocat i on next t o t he t i t l e bl ock. Pl ace t he Gover nment cont r act number i n t he mar gi n, i mmedi at el y bel ow t he t i t l e bl ock, f or each dr awi ng.

Reser ve a bl ank space, no smal l er t han [ _____] i nches on t he r i ght - hand si de of each sheet f or t he Gover nment di sposi t i on st amp.

1. 5. 3. 3 For mat of SD- 03 Pr oduct Dat a

Pr esent pr oduct dat a submi t t al s f or each sect i on as a compl et e, bound vol ume.

I ncl ude a t abl e of cont ent s, l i s t i ng t he page and cat al og i t em number s f or pr oduct dat a.

I ndi cat e, by pr omi nent not at i on, each pr oduct t hat i s bei ng submi t t ed;

i ndi cat e t he speci f i cat i on sect i on number and par agr aph number t o whi ch i t pertains.

1. 5. 3. 3. 1 Pr oduct I nf or mat i on

Suppl ement pr oduct dat a wi t h mat er i al pr epar ed f or t he pr oj ect t o sat i sf y t he submi t t al r equi r ement s wher e pr oduct dat a does not exi st . I dent i f y t hi s mat er i al as devel oped speci f i cal l y f or t he pr oj ect , wi t h i nf or mat i on and f or mat as r equi r ed f or submi ssi on of SD- 07 Cer t i f i cat es.

Pr ovi de pr oduct dat a i n uni t s used i n t he Cont r act document s. Wher e pr oduct dat a ar e i ncl uded i n pr epr i nt ed cat al ogs wi t h anot her uni t , submi t t he di mensi ons i n cont r act document uni t s, on a separ at e sheet .

1. 5. 3. 3. 2 Standards

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer .

St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h t he speci f i ed or gani zat i on' s r ef er ence st andar d.

SECTI ON 01 33 00 Page 8

1. 5. 3. 3. 3 Dat a Submi ssi on

Col l ect r equi r ed dat a submi t t al s f or each speci f i c mat er i al , pr oduct , uni t of wor k, or syst em i nt o a s i ngl e submi t t al t hat i s mar ked f or choi ces, opt i ons, and por t i ons appl i cabl e t o t he submi t t al . Mar k each copy of t he pr oduct dat a i dent i cal l y . Par t i al submi t t al s wi l l [ not ] be accept ed f or expedi t i on of t he const r uct i on ef f or t .

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 5. 3. 4 For mat of SD- 04 Sampl es

1. 5. 3. 4. 1 Sampl e Char act er i st i cs

Fur ni sh sampl es i n t he f ol l owi ng s i zes, unl ess ot her wi se speci f i ed or unl ess t he manuf act ur er has pr epackaged sampl es of appr oxi mat el y t he same si ze as speci f i ed:

a. Sampl e of Equi pment or Devi ce: Ful l s i ze.

b. Sampl e of Mat er i al s Less Than 2 by 3 i nches: Bui l t up t o 8 1/ 2 by 11 inches.

c. Sampl e of Mat er i al s Exceedi ng 8 1/ 2 by 11 i nches: Cut down t o 8 1/ 2 by 11 i nches and adequat e t o i ndi cat e col or , t ext ur e, and mat er i al variations.

d. Sampl e of Li near Devi ces or Mat er i al s: 10 i nch l engt h or l engt h t o be suppl i ed, i f l ess t han 10 i nches. Exampl es of l i near devi ces or mat er i al s ar e condui t and handr ai l s.

e. Sampl e Vol ume of Nonsol i d Mat er i al s: Pi nt . Exampl es of nonsol i d mat er i al s ar e sand and pai nt .

f . Col or Sel ect i on Sampl es: 2 by 4 i nches. Wher e sampl es ar e speci f i ed f or sel ect i on of col or , f i ni sh, pat t er n, or t ext ur e, submi t t he f ul l set of avai l abl e choi ces f or t he mat er i al or pr oduct speci f i ed. Si zes and quant i t i es of sampl es ar e t o r epr esent t hei r r espect i ve st andar d unit.

g. Sampl e Panel : 4 by 4 f eet .

h. Sampl e I nst al l at i on: 100 squar e f eet .

1. 5. 3. 4. 2 Sampl e I ncor por at i on

Reusabl e Sampl es: I ncor por at e r et ur ned sampl es i nt o wor k onl y i f so speci f i ed or i ndi cat ed. I ncor por at ed sampl es ar e t o be i n undamaged condi t i on at t he t i me of use.

Recor di ng of Sampl e I nst al l at i on: Not e and pr eser ve t he not at i on of any ar ea const i t ut i ng a sampl e i nst al l at i on, but r emove t he not at i on at t he f i nal c l ean- up of t he pr oj ect .

1. 5. 3. 4. 3 Compar i son Sampl e

Sampl es Showi ng Range of Var i at i on: Wher e var i at i ons i n col or , f i ni sh, pat t er n, or t ext ur e ar e unavoi dabl e due t o nat ur e of t he mat er i al s, submi t

SECTI ON 01 33 00 Page 9 set s of sampl es of not l ess t han t hr ee uni t s showi ng ext r emes and mi ddl e of r ange. Mar k each uni t t o descr i be i t s r el at i on t o t he r ange of t he variation.

When col or , t ext ur e, or pat t er n i s speci f i ed by nami ng a par t i cul ar manuf act ur er and st y l e, i ncl ude one sampl e of t hat manuf act ur er and st y l e, f or compar i son.

1. 5. 3. 5 For mat of SD- 05 Desi gn Dat a

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper . Pr ovi de a bound vol ume f or submi t t al s cont ai ni ng numer ous pages.

1. 5. 3. 6 For mat of SD- 06 Test Repor t s

Pr ovi de r epor t s on 8 1/ 2 by 11 i nch paper i n a compl et e bound vol ume.

By pr omi nent not at i on, i ndi cat e each r epor t i n t he submi t t al . I ndi cat e t he speci f i cat i on number and par agr aph number t o whi ch each r epor t per t ai ns.

1. 5. 3. 7 For mat of SD- 07 Cer t i f i cat es

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper . Pr ovi de a bound vol ume f or submi t t al s cont ai ni ng numer ous pages.

1. 5. 3. 8 For mat of SD- 08 Manuf act ur er ' s I nst r uct i ons

Pr esent manuf act ur er ' s i nst r uct i ons submi t t al s f or each sect i on as a compl et e, bound vol ume. I ncl ude t he manuf act ur er ' s name, t r ade name, pl ace of manuf act ur e, and cat al og model or number on pr oduct dat a. Al so i ncl ude appl i cabl e f eder al , mi l i t ar y, i ndust r y, and t echni cal - soci et y publ i cat i on r ef er ences. I f suppl ement al i nf or mat i on i s needed t o c l ar i f y t he manuf act ur er ' s dat a, submi t i t as speci f i ed f or SD- 07 Cer t i f i cat es.

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 5. 3. 8. 1 Standards

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer .

St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h t he speci f i ed or gani zat i on' s r ef er ence st andar d.

1. 5. 3. 9 For mat of SD- 09 Manuf act ur er ' s Fi el d Repor t s

Pr ovi de r epor t s on 8 1/ 2 by 11 i nch paper i n a compl et e bound vol ume.

By pr omi nent not at i on, i ndi cat e each r epor t i n t he submi t t al . I ndi cat e t he speci f i cat i on number and par agr aph number t o whi ch each r epor t per t ai ns.

SECTI ON 01 33 00 Page 10

1. 5. 3. 10 For mat of SD- 10 Oper at i on and Mai nt enance Dat a ( O&M)

Compl y wi t h t he r equi r ement s speci f i ed i n Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA f or O&M Dat a f or mat .

1. 5. 3. 11 For mat of SD- 11 Cl oseout Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval s t amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

1. 5. 4 Sour ce Dr awi ngs f or Shop Dr awi ngs

1. 5. 4. 1 Sour ce Dr awi ngs

The ent i r e set of sour ce dr awi ng f i l es ( DWG) wi l l not be pr ovi ded t o t he Cont r act or . Request t he speci f i c Dr awi ng Number f or t he pr epar at i on of shop dr awi ngs. Onl y t hose dr awi ngs r equest ed t o pr epar e shop dr awi ngs wi l l be pr ovi ded. These dr awi ngs ar e pr ovi ded onl y af t er awar d.

1. 5. 4. 2 Ter ms and Condi t i ons

Dat a cont ai ned on t hese el ect r oni c f i l es must not be used f or any pur pose ot her t han as a conveni ence i n t he pr epar at i on of const r uct i on dat a f or t he r ef er enced pr oj ect . Any ot her use or r euse i s at t he sol e r i sk of t he Cont r act or and wi t hout l i abi l i t y or l egal exposur e t o t he Gover nment . The Cont r act or must make no c l ai m, and wai ves t o t he f ul l est ext ent per mi t t ed by l aw any c l ai m or cause of act i on of any nat ur e agai nst t he Gover nment , i t s agent s, or i t s subconsul t ant s t hat may ar i se out of or i n connect i on wi t h t he use of t hese el ect r oni c f i l es. The Cont r act or must , t o t he f ul l est ext ent per mi t t ed by l aw, i ndemni f y and hol d t he Gover nment har ml ess agai nst al l damages, l i abi l i t i es, or cost s, i ncl udi ng r easonabl e at t or ney' s f ees and def ense cost s, ar i s i ng out of or r esul t i ng f r om t he use of t hese el ect r oni c f i l es.

These el ect r oni c sour ce dr awi ng f i l es ar e not const r uct i on document s.

Di f f er ences may exi st bet ween t he sour ce dr awi ng f i l es and t he cor r espondi ng const r uct i on document s. The Gover nment makes no r epr esent at i on r egar di ng t he accur acy or compl et eness of t he el ect r oni c sour ce dr awi ng f i l es, nor does i t make r epr esent at i on t o t he compat i bi l i t y of t hese f i l es wi t h t he Cont r act or har dwar e or sof t war e. The Cont r act or i s r esponsi bl e f or det er mi ni ng i f any conf l i c t exi st s. I n t he event t hat a conf l i c t ar i ses bet ween t he s i gned and seal ed const r uct i on document s pr epar ed by t he Gover nment and t he f ur ni shed sour ce dr awi ng f i l es, t he s i gned and seal ed const r uct i on document s gover n. Use of t hese sour ce dr awi ng f i l es does not r el i eve t he Cont r act or of t he dut y t o f ul l y compl y wi t h t he cont r act document s, i ncl udi ng and wi t hout l i mi t at i on t he need t o check, conf i r m and coor di nat e t he wor k of al l cont r act or s f or t he pr oj ect .

I f t he Cont r act or uses, dupl i cat es or modi f i es t hese el ect r oni c sour ce dr awi ng f i l es f or use i n pr oduci ng const r uct i on dat a r el at ed t o t hi s cont r act , r emove al l pr evi ous i ndi cat i on of owner shi p ( seal s, l ogos, s i gnat ur es, i ni t i al s and dat es) .

1. 5. 5 El ect r oni c Fi l e For mat

Pr ovi de submi t t al s i n el ect r oni c f or mat , wi t h t he except i on of mat er i al

SECTI ON 01 33 00 Page 11 sampl es r equi r ed f or SD- 04 Sampl es i t ems. [ I n addi t i on t o t he el ect r oni c submi t t al , pr ovi de [ t hr ee] [ _____] har d copi es of t he submi t t al s. ] Compi l e t he submi t t al f i l e as a s i ngl e, compl et e document , t o i ncl ude t he Tr ansmi t t al For m descr i bed wi t hi n. Name t he el ect r oni c submi t t al f i l e speci f i cal l y accor di ng t o i t s cont ent s, and coor di nat e t he f i l e nami ng convent i on wi t h t he Cont r act i ng Of f i cer . El ect r oni c f i l es must be of suf f i c i ent qual i t y t hat al l i nf or mat i on i s l egi bl e. Use PDF as t he el ect r oni c f or mat , unl ess ot her wi se speci f i ed or di r ect ed by t he Cont r act i ng Of f i cer . Gener at e PDF f i l es f r om or i gi nal document s wi t h bookmar ks so t hat t he t ext i ncl uded i n t he PDF f i l e i s sear chabl e and can be copi ed. I f document s ar e scanned, opt i cal char act er r esol ut i on ( OCR) r out i nes ar e r equi r ed. I ndex and bookmar k f i l es exceedi ng 30 pages t o al l ow ef f i c i ent navi gat i on of t he f i l e. When r equi r ed, t he el ect r oni c f i l e must i ncl ude a val i d el ect r oni c s i gnat ur e or a scan of a s i gnat ur e.

E- mai l el ect r oni c submi t t al document s smal l er t han 10MB t o an e- mai l addr ess as di r ect ed by t he Cont r act i ng Of f i cer . Pr ovi de el ect r oni c document s over 10 MB on an opt i cal di sc or t hr ough an el ect r oni c f i l e shar i ng syst em such as t he AMRDEC SAFE Web Appl i cat i on l ocat ed at t he f ol l owi ng websi t e: https://safe.amrdec.army.mil/safe/ .

1. 6 QUANTI TY OF SUBMI TTALS

1. 6. 1 Number of SD- 01 Pr econst r uct i on Submi t t al Copi es

Unl ess ot her wi se speci f i ed, submi t [ t wo] [ t hr ee] set s of admi ni st r at i ve submittals.

1. 6. 2 Number of SD- 02 Shop Dr awi ng Copi es

Submi t [ s i x] [ _____] copi es of submi t t al s of shop dr awi ngs r equi r i ng r evi ew and appr oval by a QC or gani zat i on. Submi t [ seven] [ _____] copi es of shop dr awi ngs r equi r i ng r evi ew and appr oval by t he Cont r act i ng Of f i cer .

1. 6. 3 Number of SD- 03 Pr oduct Dat a Copi es

Submi t i n compl i ance wi t h quant i t y r equi r ement s speci f i ed f or shop dr awi ngs.

1. 6. 4 Number of SD- 04 Sampl es

a. Submi t [ t wo] [ _____] sampl es, or [ t wo] [ _____] set s of sampl es showi ng t he r ange of var i at i on, of each r equi r ed i t em. One appr oved sampl e or set of sampl es wi l l be r et ai ned by t he appr ovi ng aut hor i t y and one wi l l be r et ur ned t o t he Cont r act or .

b. Submi t one sampl e panel or pr ovi de one sampl e i nst al l at i on wher e di r ect ed. I ncl ude component s l i s t ed i n t he t echni cal sect i on or as directed.

c. Submi t one sampl e i nst al l at i on, wher e di r ect ed.

d. Submi t one sampl e of nonsol i d mat er i al s.

1. 6. 5 Number of SD- 05 Desi gn Dat a Copi es

Submi t i n compl i ance wi t h quant i t y r equi r ement s speci f i ed f or shop dr awi ngs.

SECTI ON 01 33 00 Page 12

1. 6. 6 Number of SD- 06 Test Repor t Copi es

Submi t i n compl i ance wi t h quant i t y and qual i t y r equi r ement s speci f i ed f or shop dr awi ngs, ot her t han f i el d t est r esul t s t hat wi l l be submi t t ed wi t h QC reports.

1. 6. 7 Number of SD- 07 Cer t i f i cat e Copi es

Submi t i n compl i ance wi t h quant i t y r equi r ement s speci f i ed f or shop dr awi ngs.

1. 6. 8 Number of SD- 08 Manuf act ur er ' s I nst r uct i ons Copi es

Submi t i n compl i ance wi t h quant i t y r equi r ement s speci f i ed f or shop dr awi ngs.

1. 6. 9 Number of SD- 09 Manuf act ur er ' s Fi el d Repor t Copi es

Submi t i n compl i ance wi t h quant i t y and qual i t y r equi r ement s speci f i ed f or shop dr awi ngs ot her t han f i el d t est r esul t s t hat wi l l be submi t t ed wi t h QC reports.

1. 6. 10 Number of SD- 10 Oper at i on and Mai nt enance Dat a Copi es

Submi t [ f i ve] [ t hr ee] [ _____] copi es of O&M dat a t o t he Cont r act i ng Of f i cer f or r evi ew and appr oval .

1. 6. 11 Number of SD- 11 Cl oseout Submi t t al s Copi es

Unl ess ot her wi se speci f i ed, submi t [ t wo] [ t hr ee] set s of admi ni st r at i ve submittals.

1. 7 I NFORMATI ON ONLY SUBMI TTALS

Submi t t al s wi t hout a " G" desi gnat i on must be cer t i f i ed by t he QC manager and submi t t ed t o t he Cont r act i ng Of f i cer f or i nf or mat i on- onl y. Appr oval of t he Cont r act i ng Of f i cer i s not r equi r ed on i nf or mat i on onl y submi t t al s.

The Cont r act i ng Of f i cer wi l l mar k " r ecei pt acknowl edged" on submi t t al s f or i nf or mat i on and wi l l r et ur n onl y t he t r ansmi t t al cover sheet t o t he Cont r act or . Nor mal l y, submi t t al s f or i nf or mat i on onl y wi l l not be r et ur ned. However , t he Gover nment r eser ves t he r i ght t o r et ur n unsat i sf act or y submi t t al s and r equi r e t he Cont r act or t o r esubmi t any i t em f ound not t o compl y wi t h t he cont r act . Thi s does not r el i eve t he Cont r act or f r om t he obl i gat i on t o f ur ni sh mat er i al conf or mi ng t o t he pl ans and speci f i cat i ons; wi l l not pr event t he Cont r act i ng Of f i cer f r om r equi r i ng r emoval and r epl acement of nonconf or mi ng mat er i al i ncor por at ed i n t he wor k;

and does not r el i eve t he Cont r act or of t he r equi r ement t o f ur ni sh sampl es f or t est i ng by t he Gover nment l abor at or y or f or check t est i ng by t he Gover nment i n t hose i nst ances wher e t he t echni cal speci f i cat i ons so pr escr i be. For Desi gn- Bui l d const r uct i on, t he Gover nment wi l l r et ai n [ _____] copi es of i nf or mat i on- onl y submi t t al s.

1. 8 PROJECT SUBMI TTAL REGI STER AND DATABASE

A sampl e Pr oj ect Submi t t al Regi st er showi ng i t ems of equi pment and mat er i al s f or when submi t t al s ar e r equi r ed by t he speci f i cat i ons i s pr ovi ded as " Appendi x A - Submi t t al Regi st er . "

1. 8. 1 Submi t t al Management

Pr epar e and mai nt ai n a submi t t al r egi st er , as t he wor k pr ogr esses. Use an

SECTI ON 01 33 00 Page 13 el ect r oni c submi t t al r egi st er pr ogr am f ur ni shed by t he Gover nment . Do not change dat a t hat i s out put i n col umns ( c) , ( d) , ( e) , and ( f ) as del i ver ed by Gover nment ; r et ai n dat a t hat i s out put i n col umns ( a) , ( g) , ( h) , and ( i ) as appr oved. As an at t achment , pr ovi de a submi t t al r egi st er showi ng i t ems of equi pment and mat er i al s f or whi ch submi t t al s ar e r equi r ed by t he speci f i cat i ons. Thi s l i s t may not be al l - i ncl usi ve and addi t i onal submi t t al s may be r equi r ed. Mai nt ai n a submi t t al r egi st er f or t he pr oj ect i n accor dance wi t h Sect i on 01 45 00. 15 10 RESI DENT MANAGEMENT SYSTEM CONTRACTOR MODE( RMS CM) . [ The Gover nment wi l l pr ovi de t he i ni t i al submi t t al r egi st er ] [ i n el ect r oni c f or mat ] [ wi t h t he f ol l owi ng f i el ds compl et ed, t o t he ext ent t hat wi l l be r equi r ed by t he Gover nment dur i ng subsequent usage. ]

Col umn ( c) : Li s t s speci f i cat i on sect i on i n whi ch submi t t al i s required.

Col umn ( d) : Li s t s each submi t t al descr i pt i on ( SD Number . and t ype, e. g. , SD- 02 Shop Dr awi ngs) r equi r ed i n each speci f i cat i on section.

Col umn ( e) : Li s t s one pr i nci pal par agr aph i n each speci f i cat i on sect i on wher e a mat er i al or pr oduct i s speci f i ed. Thi s l i s t i ng i s onl y t o f aci l i t at e l ocat i ng submi t t ed r equi r ement s. Do not consi der ent r i es i n col umn ( e) as l i mi t i ng t he pr oj ect requirements.

The dat abase and submi t t al management pr ogr am wi l l be f ur ni shed t o t he Cont r act or on a wr i t abl e compact di sk ( CD- R) , f or oper at i on on a Wi ndows- based per sonal comput er .

Ther eaf t er , t he Cont r act or i s t o t r ack al l submi t t al s by mai nt ai ni ng a compl et e l i s t , i ncl udi ng compl et i on of al l dat a col umns and al l dat es on whi ch submi t t al s ar e r ecei ved by and r et ur ned by t he Gover nment .

1. 8. 2 Desi gn- Bui l d Submi t t al Regi st er

The Desi gner of Recor d devel ops a compl et e l i s t of submi t t al s dur i ng desi gn and i dent i f y r equi r ed submi t t al s i n t he speci f i cat i ons, and use t he l i s t t o pr epar e t he Submi t t al Regi st er . The l i s t may not be al l i ncl usi ve and addi t i onal submi t t al s may be r equi r ed by ot her par t s of t he cont r act .

Compl et e t he submi t t al r egi st er and submi t i t t o t he Cont r act i ng Of f i cer f or appr oval wi t hi n 30 cal endar days af t er Not i ce t o Pr oceed. The appr oved submi t t al r egi st er wi l l ser ve as a schedul i ng document f or submi t t al s and wi l l be used t o cont r ol submi t t al act i ons t hr oughout t he cont r act per i od.

Coor di nat e t he submi t dat es and need dat es wi t h dat es i n t he Cont r act or pr epar ed pr ogr ess schedul e. Submi t mont hl y or unt i l al l submi t t al s have been sat i sf act or i l y compl et ed, updat es t o t he submi t t al r egi st er showi ng t he Cont r act or act i on codes and act ual dat es wi t h Gover nment act i on codes.

Revi se t he submi t t al r egi st er when t he pr ogr ess schedul e i s r evi sed and submi t bot h f or appr oval .

1. 8. 3 Pr econst r uct i on Use of Submi t t al Regi st er

Submi t t he submi t t al r egi st er as an el ect r oni c dat abase, usi ng t he submi t t al management pr ogr am f ur ni shed t o Cont r act or . I ncl ude t he QC pl an and t he pr oj ect schedul e. Ver i f y t hat al l submi t t al s r equi r ed f or t he pr oj ect ar e l i s t ed and add mi ssi ng submi t t al s. Coor di nat e and compl et e t he f ol l owi ng f i el ds on t he r egi st er dat abase submi t t ed wi t h t he QC pl an and

SECTI ON 01 33 00 Page 14 t he pr oj ect schedul e:

Col umn ( a) Act i v i t y Number : Act i v i t y number f r om t he pr oj ect schedule.

Col umn ( g) Cont r act or Submi t Dat e: Schedul ed dat e f or t he appr ovi ng aut hor i t y t o r ecei ve submi t t al s.

Col umn ( h) Cont r act or Appr oval Dat e: Dat e t hat Cont r act or needs appr oval of submi t t al .

Col umn ( i ) Cont r act or Mat er i al : Dat e t hat Cont r act or needs mat er i al del i ver ed t o Cont r act or cont r ol .

1. 8. 4 Cont r act or Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds i n t he Gover nment - f ur ni shed submi t t al r egi st er pr ogr am or equi val ent f i el ds i n t he pr ogr am used by t he Cont r act or wi t h each submi t t al t hr oughout t he cont r act .

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( j ) Act i on Code ( k) : Dat e of act i on used t o r ecor d Cont r act or ' s r evi ew when f or war di ng submi t t al s t o QC.

Col umn ( l ) Dat e submi t t al t r ansmi t t ed.

Col umn ( q) Dat e appr oval was r ecei ved.

1. 8. 5 Appr ovi ng Aut hor i t y Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds:

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( l ) Dat e submi t t al was r ecei ved.

Col umn ( m) t hr ough ( p) Dat es of r evi ew act i ons.

Col umn ( q) Dat e of r et ur n t o Cont r act or .

1. 8. 6 Act i on Codes

Ent r i es f or col umns ( j ) and ( o) ar e t o be used as f ol l ows ( ot her s may be pr escr i bed by t he Tr ansmi t t al For m) :

1. 8. 6. 1 Gover nment Revi ew Act i on Codes

" A" - " Appr oved as submi t t ed" ; " Compl et ed"

" B" - " Appr oved, except as not ed on dr awi ngs" ; " Compl et ed"

" C" - " Appr oved, except as not ed on dr awi ngs; r esubmi ssi on r equi r ed" ; " Resubmi t "

" D" - " Ret ur ned by separ at e cor r espondence" ; " Compl et ed"

SECTI ON 01 33 00 Page 15

" E" - " Di sappr oved ( See at t ached) " ; " Resubmi t "

" F" - " Recei pt acknowl edged" ; " Compl et ed"

" G" - " Ot her ( Speci f y) " ; " Resubmi t "

" X" - " Recei pt acknowl edged, does not compl y wi t h cont r act r equi r ement s" ; " Resubmi t "

1. 8. 6. 2 Cont r act or Act i on Codes

DESI GN BI D BUI LD SUBMI TTALS

Submittal Cl assi f i cat i ons shown i n UFGS Sect i ons

Submittal Classification

Corresponding SpecsIntact

Submi t t al Regi st er Code whi ch i s popul at ed i n t he SI Submittal Register.

Sof t war e Li mi t at i ons:

(The sof t war e shows one char act er del i neat i on i n t he SpecsI nt act Submi t t al Regi st er )

RMS – The f ol l owi ng Submittal

Cl assi f i cat i ons ar e popul at ed i n RMS when t he SpecsIntact

Submi t t al Dat a Fi l e i s pul l ed i nt o

RMS)

G Submi t t al r equi r es Gover nment Appr oval

G GA

BLANK Submi t t al i s For I nf or mat i on Onl y

(FIO)

BLANK FIO

S Submi t t al i s f or documentation of Sust ai nabl e requirements

S S/FIO

SECTI ON 01 33 00 Page 16

1. 8. 6. 3 Cont r act or Act i on Codes

DESI GN BUI LD SUBMI TTALS

Submittal Cl assi f i cat i ons shown i n UFGS Sect i ons

Submittal Classification

Corresponding SpecsIntact

Submi t t al Regi st er Code whi ch i s popul at ed i n t he SI Submittal Register.

Software

Li mi t at i ons: ( The sof t war e shows one character del i neat i on i n t he

SpecsIntact Submi t t al Regi st er )

RMS – The f ol l owi ng Submittal

Cl assi f i cat i ons ar e popul at ed i n RMS when t he SpecsIntact

Submi t t al Dat a Fi l e i s pul l ed i nt o

RMS)

G Submi t t al r equi r es Gover nment Appr oval

G GA

BLANK Submi t t al i s For I nf or mat i on Onl y( FI O)

BLANK FIO

DA Submi t t al r equi r es Desi gner of Recor d

Approval

D DA

CR Submi t t al r equi r es Government

Conformance Review

C CR

DA/CR Submi t t al r equi r es Desi gner of

Recor d Appr oval and Government

Conformance Review

R DA/CR

DA/GA Submi t t al r equi r es Desi gner of

Recor d Appr oval and Gover nment Appr oval

A DA/GA

1. 8. 7 Del i ver y of Copi es

Submi t an updat ed el ect r oni c copy of t he submi t t al r egi st er t o t he Cont r act i ng Of f i cer wi t h each i nvoi ce r equest , unl ess a paper copy i s r equest ed by t he Cont r act i ng Of f i cer . Pr ovi de an updat ed Submi t t al Regi st er mont hl y r egar dl ess of whet her an i nvoi ce i s submi t t ed.

1. 9 VARIATIONS

Var i at i ons f r om cont r act r equi r ement s r equi r e Cont r act i ng Of f i cer appr oval pur suant t o cont r act Cl ause FAR 52. 236- 21 Speci f i cat i ons and Dr awi ngs f or Const r uct i on, and wi l l be consi der ed wher e advant ageous t o t he Gover nment .

SECTI ON 01 33 00 Page 17

1. 9. 1 Consi der i ng Var i at i ons

Di scussi on of var i at i ons wi t h t he Cont r act i ng Of f i cer bef or e submi ssi on wi l l hel p ensur e t hat f…