Revised_Attachment_3_Past_Performance_Questionnaire_-_Range_16R0014_FH_20160715.docx
DOCX document 25 KB Posted
- Attached to
- Range Operations Support Services
- Solicitation number
- W91151-16-R-0014
About this file
Attachment 3 - Past Performance Questionnaire
View the file
Other files
Show all 45
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 3
Questionnaire Cover Letter Solicitation: W91151-16-R-0014
ATTACHMENT 3
Past Performance Questionnaire Solicitation: W91151-16-R-0014
LETTERHEAD
(Date)
FOR OFFICIAL USE ONLY
The Mission and Installation Contracting Command (MICC) – Fort Hood is in the process of selecting a contractor for a Range Operations Support Services program.
One of the considerations in proposal evaluation is the verification of the offerors' past and present performance on contracts, which reflect the offeror's ability to perform on the proposed effort. We depend on information received from agencies such as yours, which have had firsthand experience with an offeror, for the evaluation of the offeror's performance on those contracts.
Our areas of interest in the offeror are summarized in the enclosed questionnaire. Our schedule is extremely tight and we need your written response prior to the 12:00pm CDT, 22 August 2016 RFP closing date. This schedule will allow us sufficient time to analyze the data prior to the start of negotiations.
To assist you in preparing your response and expediting your reply, the questionnaire may be filled out by hand and emailed to Contract Specialist, Ms. Mary Chamberlin, mary.a.chamberlin4.civ@mail.mil, and Contracting Officer, Ms. Pamilla Lazare, pamilla.a.lazare.civ@mail.mil (RE: W91151-16-R-0014). Your completed questionnaire will become a part of the official Source Selection records.
Your help is greatly appreciated and your prompt response will be one of the keys to the successful and timely completion of this Source Selection.
WHEN FILLED IN THIS DOCUMENT IS SOURCE SELECTION SENSITIVE INFORMATION IAW FAR 3.104
SECTION 1: CONTRACT IDENTIFICATION
1. Contractor: ________________________________________________________________
1. Cage Code: _________________________________
1. Contract number: _______________________________________
1. Award Date: ________________________
1. Contract type: ______________________________
1. Was this a competitive contract? Yes _____ No _____
1. Period of performance: ______________________________________________________
1. Initial contract cost: $____________________________
1. Current/final contract cost: $_______________________________
1. Reasons for differences between initial contract cost and final contract costs:
1. Description of service provided: _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
1. Relevancy Description: ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
SECTION 2: CUSTOMER OR AGENCY IDENTIFICATION
1. Customer or agency name: ____________________________________________________
1. Customer or agency description (if applicable): ___________________________________
1. Geographic description of services under this contract, i.e. local, nationwide, worldwide, other Commands:
SECTION 3: EVALUATOR IDENTIFICATION
1. Evaluator's name: ___________________________________________________________
1. Evaluator's title: ____________________________________________________________
1. Evaluator's phone/fax number: _________________________________________________
1. Number of years evaluator worked on subject contract: _____________________________
SECTION 4: EVALUATION
Please indicate your satisfaction with the contractor’s performance by placing an “X” in the appropriate block using the scale provided to the right of each question. This scale is defined as follows:
CODE PERFORMANCE LEVEL
S SATISFACTORY – The contractor’s performance meets contractual requirements. The contractual performance contained some minor problems for which corrective actions taken by the contractor appear or were satisfactory.
M MARGINAL – Performance does not meet some contractual requirements. The contractual performance reflects a serious problem for which the contractor has not yet identified corrective actions or the contractor’s proposed actions appear only marginally effective or were not fully implemented.
US UNSATISFACTORY – Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance contains serious problem(s) for which the contractor’s corrective actions appear or were ineffective.
NA NOT APPLICABLE - Unable to provide a score.
| Technical Performance |
| S |
| M |
| US |
| NA |
T1. Quality & acceptability of operations & maintenance.
T2. Quality of technical system testing and certification efforts
T3. Quality/integrity of technical data/report preparation efforts
T4. Adequacy/effectiveness of quality control program and adherence to contract quality assurance requirements
T5. Ability to implement current standard practices for computer hardware design, operation, maintenance, upgrades and configuration control
T6. Ability to implement current standard practices for computer software design, operation, maintenance, upgrades and configuration control
T7. Adequacy/effectiveness of environmental safety procedures
T8. Ability to operate Multi-Use Towers and adherence to Shot Sheets
T9. Ability to Operate Small Arms Towers and adherence to Scenarios
T10. Ability to operate DOS based target systems
T11. Ability to operate TRACR based target systems
T12. Ability to operate MIGGET based target systems
T13. Ability to operate Main Gun Armor and Aviation ranges
T14. Ability to operate Underground Training Facilities IAW OSHA and MSHA standards
T15. Quality of Direct Support/General Support (DS/GS) maintenance and repair of Government Furnished Equipment
| Program Management |
| S |
| M |
| US |
| NA |
P1. Effectiveness of overall contract management (including ability to effectively lead, manage and control the program)
P2. Contractor was reasonable and cooperative in dealing with your staff (including the ability to successfully resolve disagreements/disputes)
P3. Timeliness/effectiveness of contract problem resolution without extensive customer guidance
P4. Understand/complied with customer objectives and technical requirements
P5. Successfully responded to emergency and/or surge situations
P6. Quality/effectiveness of sub-contracted efforts
P7. Effectiveness of material management (including Government Furnished Property or Material)
P8. Effectiveness of acquisition management
P9. Contractor proposed alternative methods/processes that reduced cost, improved maintainability or other factors that benefited the customer
P10. Contractor implemented responsive/flexible processes to improve quality and timeliness of support.
P11. Quality/Effectiveness of the Contractor’s Quality Control Plan
P12. Contractor’s Safety Record
| Transition/phase-in |
| S |
| M |
| US |
| NA |
T1. Contractor ability to smoothly transition resources and personnel.
T2. Contractor effectiveness on maintaining continuity of mission support while transitioning/phasing in resources and personnel to support other efforts.
| Employee Retention/Attraction |
| S |
| M |
| US |
| NA |
E1. Ability to hire/apply a qualified workforce to this effort.
E2. Ability to retain a qualified workforce on this effort.
E3. Effectiveness of employee compensation towards quality of work.
| Cost Performance |
| S |
| M |
| US |
| NA |
C1. Accuracy in forecasting contract costs
C2. Ability to meet forecasted costs and perform within contract costs
C3. Ability to alert Government of unforeseen costs before they occur
C4. Sufficiency and timeliness of cost reporting
1. Please discuss each and every response for which you indicated M (Marginal) or US (Unsatisfactory) in response to the questions above (use additional sheets, if necessary).
2. Government Contracts Only: Has/was this contract been partially or completely terminated for default or convenience or are there any pending terminations?
| Yes____ | Default____ | Convenience____ | Pending Terminations____ |
| No ____ |
If yes, please explain (e.g., inability to meet cost, performance, or delivery schedules, etc).
SECTION 5: NARRATIVE SUMMARY
Would you have any reservations about soliciting this contractor in the future or having them perform one of your critical and demanding programs?
Please provide any additional comments concerning this contractor’s performance, as desired.
Evaluator’s Signature Date
Thank you for your prompt response and assistance!
Please return this completed questionnaire to:
E-mail to: Contract Specialist, Ms. Mary Chamberlin, mary.a.chamberlin4.civ@mail.mil, and Contracting Officer, Ms. Pamilla Lazare, pamilla.a.lazare.civ@mail.mil.
File details come from the government source that posted it. Updated .