Attachment_0006_1680-ALSE-120_RevB_LENS_INNER.PDF

U.S. ARMY AVIATION AND MISSILE COMMAND

SPARES TECHNICAL DATA PACKAGE

PACKAGE NUMBER

1680-ALSE-120

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Prepared By:

AD Rose

Approval:

TE Gaido

Date:

1/3/2013

Date:

1/9/2013

REVISIONS

SYM DESCRIPTION OF CHANGES

TITLE

LENS, INNER

APPLICABLE TO: 1680-ALSE-120-1

END ITEM: ALSE

CAGE CODE: 81996

B Completely revise to latest SOP requirements.

Remove 1680-ALSE-120-2 as an applicable part.

SUBSTITUTE FOR AMSAV-3 FORM 136

SPARES TECHNICAL DATA PACKAGE NUMBER: 1680-ALSE-120

TITLE:LENS, INNER

1. SCOPE:

This Spares Technical Data Package covers technical requirements for manufacture of the item(s) specified by the solicitation or contract. The documents listed in paragraph 2, with revisions as noted in the accompanying Tech Data Package List (identified by procurement package ‘PP’ number and date), are part of this package to the extent specified herein. All military, federal, and commercial or industry specifications appearing hereon or on referenced documents are part of this procurement package to the extent specified and shall be the issue in effect on the date of the solicitation, unless otherwise specified. In the event of conflict between drawings, specifications, and package requirements, the order of precedence is as follows: (a) The requirements of the remainder of this package (paragraphs 3 and following), (b) Drawings,

(c) Specs or standards appearing hereon or on referenced documents, (d) Other referenced documents.

2. ACCOMPANYING DOCUMENTS:

a. AMCOM CAGE 81996 DWG 1680-ALSE-120

b. AMCOM CAGE 81996 DWG 1680-ALSE-158

c. AMCOM CAGE 81996 DWG 1680-ALSE-195

d. AMCOM CAGE 81996 DWG 1680-ALSE-211

e. AMCOM CAGE 81996 DWG 1680-ALSE-212

f. AMCOM CAGE 81996 DWG 1680-ALSE-213

g. AMCOM CAGE 81996 DWG 1680-ALSE-214

h. AMCOM CAGE 81996 DWG 1680-ALSE-215

i. AMCOM CAGE 81996 DWG 1680-ALSE-216

j. AMCOM CAGE 81996 DWG 1680-ALSE-217

k. AMCOM CAGE 81996 DWG 1680-ALSE-218

l. AMCOM CAGE 81996 DWG AIHS-FS-0001

3. INTERPRETATION OF CODES, SPECIFICATIONS, AND NOTES:

a. The following specification replacement data will apply for all drawings included in this Spares Technical Data Package.

(1). MIL-STD-100 is replaced by ASME-Y14.24, -Y14.34, -Y14.35 and -Y14.100.

(2). MIL-V-43511 is replaced by MIL-DTL-43511.

TITLE:LENS, INNER

3. INTERPRETATION OF CODES, SPECIFICATIONS, AND NOTES

(CONT.)

(3). QQ-W-423 is replaced by ASTM-A580 and ASTM-A313.

(4). QQ-S-766 is replaced by ASTM-A666, ASTM-693 and ASTM-240.

(5). QQ-P-35 is replaced by ASTM-A967 and AMS-2700.

(6). MIL-C-13924 is replaced by MIL-DTL-13924.

(7). MIL-S-853 is replaced by AMS-QQ-S-763.

(8). QQ-A-225/8 is replaced by ASTM-B211, AMS-4115, AMS-4116, AMS-4117 and AMS-4128.

b. Changes for drawing 1680-ALSE-120:

(1). Mark parts per applicable drawing callout in accordance with MIL-STD-130 and paragraph 5 of this Spares Technical Data Package.

4. TESTING, SPECIAL INSPECTIONS, ADDITIONAL DATA AND

OTHER REQUIREMENTS:

a. Item/production will meet requirements of Appendix C.

TITLE:LENS, INNER

STANDARD PROVISIONS

5. IDENTIFICATION OF PRODUCT:

Each part shall be clearly marked with the part number as specified on the contract; the vendor’s CAGE code; and serial number if required by this STDP. Part marking shall, as a minimum, contain the information shown in the example below. Contract numbers need not be marked on the part unless specified by this STDP. The design activity code for AMCOM, 81996, shall only be used on parts submitted to and accepted by the government under an AMCOM contract. This code shall not appear on any part sold commercially whether this is to a governmental buyer or to a civilian supply house. The method and location of the identification is indicated in paragraph 3.b.(1).

Example: 81996/1680-ALSE-120-1 MFR (Vendor’s CAGE)

6. ACCEPTANCE:

Acceptance of this item shall be based on satisfactory compliance with all requirements of this package.

7. DEVIATIONS/WAIVERS:

Deviations/waivers from this package and/or referenced specifications by the contractor shall not be permitted without prior written approval from the contracting officer.

8. DISCREPANCIES:

All discrepancies in this package should be reported to the contracting officer.

9. NOTICE TO ALL PERSONS RECEIVING THIS PACKAGE:

This package is only conditionally issued by the United States Government, and neither receipt nor possession thereof confers or transfers any right in, or license to use the subject matter of the drawing, or any design technical information shown thereon, nor any right to reproduce this nor any information contained therein may be copied, reproduced, or otherwise used, except for the manufacture for the Government of the particular item requested, and in strict accordance with the related and particular Government procurement action under which the package was furnished.

10. QUALITY ASSURANCE PROVISION:

XX General: In accordance with the drawings and specifications of this SPARES

TECHNICAL DATA PACKAGE.

Additional: In accordance with QE-STD-1

SPARES TECHNICAL DATA PACKAGE:

1680-ALSE-120

APPENDIX C

ADDITIONAL FIRST ARTICLE TESTING REQUIREMENTS

NOUN: LENS, INNER

PART NUMBER: 1680-ALSE-120-1

NSN: 8415-01-394-8031

a. All the requirements contained in AIHS-FS-0001, paragraph 4.3 shall be satisfied prior to acceptance of the Part Number covered by this Spares Technical Data Package.

b. Verification of possession of USAF document/chart number 70115 is required for new sources. Reference note 3 on drawing 1680-ALSE-211.