Exhibit_D_-_DD1423_-_CDRL_A004_-_Measurement_System_Evaluation_(MSE).pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXH/ATCH NO. C. CATEGORY:

TDP TM OTHER

D.SYSTEM/ITEM

M739A1 PD/DLY Fuze

E. CONTRACT/PR

F. CONTRACTOR

17.PRICE

GROUP

1. DATA ITEM NO.

A004

2. TITLE OF DATA ITEM

Measurement System Evaluation (MSE)

3. SUBTITLE

18.ESTIMATED

TOTAL PRICE

4. AUTHORITY (Data Acquisition Document No.)

DI-QCIC-81960

5. CONTRACT REFERENCE

M739A1 Fuze SOW:C.3.10 Section E. 52.246-4018

6. REQUIRING OFFICE

RDAR-EIQ-MA

7. DD 250 REQ

LT

9.DIST STATEMENT

REQUIRED

D

10. FREQUENCY

One/R

12. DATE OF FIRST

SUBMISSION

See BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. ADP CODE

A

11. AS OF DATE

13. DATE OF SUBSEQUENT

See BLK 16 Draft

Final Reg Repro

16. REMARKS

The measurement and Inspection equipment system design documentation for acceptance of product describes the Acceptance Inspection Equipment (AIE), Automated Acceptance Inspection Equipment (AAIE) and calibration procedures to be submitted.

BLK 12: Submit 90 days prior to First Article Delivery or production if the First Article is waived. The USG will respond within 60 days of receipt.

Revisions, when applicable, are to be submitted within ten (10) calendar days of receipt of USG response. If documentation was approved on a prior contract with this contract activity and no changes were made, submit revised design for approval.

Final approval: Final approval, through verification, will be performed on-site at the contractor location NLT 30 days prior to First Article Test (FAT) or start of production if FAT is waived.

THE DATA WILL OUTLINE THE OPERATION, INSPECTION PROCEDURES TO BE

EMPLOYED TO CONDUCT QUALITY CONFORMANCE TESTS BY THE CONTRACTOR

which includes qualification, AIE, AAIE, NDT, and calibration.

See Clause paragraphs a1, a2, a5, c, d, d2, d3, e, f1, g l, m, and n for more detailed information on submittal requirements.

BLK 13: If any AIE/AAIE changes occur after initial approval, submit revised design for approval.

BLK 14: Submit electronically. Contact information will be provided in Section J after contract award.

RDAR-EIQ-MA 1 1

RDAR-MEF-F 1

Local DCMA 1

ESED: Code

JXPMN

ACC-NJ-CA 1

RDAR-EIQ-PE 1

G. PREPARED BY

Jason Menegus

H. DATE

11/15/16

I. APPROVED BY

12/22/2016

X Jeremy S. Heiskanen Jeremy S. Heiskanen Product Quality Manager Signed by: HEISKANEN.JEREMY.S.1367473408

J. DATE

12/22/2016