Exhibit_C_-_DD1423_-_CDRL_A003_-_Ammunition_Data_Cards.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXH/ATCH NO. C. CATEGORY:

TDP TM OTHER

D.SYSTEM/ITEM

M739A1 PD/DLY Fuze

E. CONTRACT/PR

F. CONTRACTOR

17.PRICE

GROUP

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

Ammunition Data Cards

3. SUBTITLE

18.ESTIMATED

TOTAL PRICE

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80043B

5. CONTRACT REFERENCE

M739A1 Fuze SOW: C.3.9

6. REQUIRING OFFICE

RDAR-EIQ-PE

7. DD 250 REQ

LT

9.DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

12. DATE OF FIRST

SUBMISSION

See BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. ADP CODE

N/A

11. AS OF DATE

ASREQ

13. DATE OF SUBSEQUENT

See BLK 16 Draft

Final Reg Repro

16. REMARKS

Ammo Data Card's (ADC) shall be prepared in accordance with MIL-STD- 1168C and electronic submission shall be accomplished by accessing the Munitions History Program (MHP) formally known as Worldwide Ammunition Data Repository Program (WARP).

BLK 12: Input a sample card into MHP 30 calendar days prior to First Article (FA), or production if FA is not applicable, for review and approval of technical content. When submitting the sample ADC for review input the words “SAMPLE CARD ONLY” in the remarks section of the ADC.

Hard copy ADCs shall be generated from MHP and accompany each Lot, and shall be signed & dated by the representative of the Government Agency Responsible for Acceptance (GARA)usually the DCMA/ACO QAR or other government designee.

When ballistic tests at Government proving grounds are required, two hard copy ADCs generated and accompany the Lot.

*****Every avenue shall be pursued to assure an accurate ADC is produced with all the appropriate documentation included. Any unknown components, older components, off the shelf items and different lot interfix numbers (with the reason for different interfix numbers) can be annotated in the "REMARKS SECTION."

This is to include any and all information that is unavailable at the time of production.

BLK 13: Submission shall commence with the first deliverable lot and continue with each subsequent lot. ADCs shall include procurement acquisition numbers for each applicable Request for Deviation, Notice of Revision and Engineering Change Proposal listed on the card.

Submit an email Letter of Transmission (LT) notifying the Product Quality Manager identified below when a card has been entered into

MHP.

BLK 14: Contact information will be provided in Section J after contract award.

RDAR-EIQ-PE

1 1

RDAR-EIQ-MA 1 1

RDAR-MEF-F 1

Local DCMA 1

ESED: Code

JXPMN

ACC-NJ-CA 1

G. PREPARED BY

Jason Menegus

H. DATE

11/15/16

I. APPROVED BY

12/22/2016

X Jeremy S. Heiskanen Jeremy S. Heiskanen Product Quality Manager Signed by: HEISKANEN.JEREMY.S.1367473408

J. DATE

12/22/2016