Solicitation Attachment 0005 - Contract Security Classification Specification - DD Form 2~ .pdf

DD-254 Continuation Sheet Solicitation # W15P7T-17-R-0008 Common Hardware Systems – 5th Generation (CHS-5)

10a. Safeguarding “Communications Security (COMSEC) Information”, Appendix A. COMSEC information provided under this contract shall be safeguarded and marked as specified in AR 25-11 and DoD 5200.1-M (Marking is in Volume 2).

10g. Personnel not assigned to a NATO staff position, but requiring access to NATO classified information, NATO COSMIC, NATO Secret or access to the NATO accredited SIPRNET terminals, must possess the equivalent FINAL or Interim U.S. Security Clearance based upon the appropriate personnel security investigation required. Personnel with access to NATO ATOMAL information must have the appropriate level FINAL U.S. Security Clearance. The government program/project manager is the designated representative that will ensure the contractor security manager and concerned employees are NATO briefed prior to access being granted. The contractor will maintain strict compliance in regards to NATO information IAW NISPOM Ch 10, Section 7. Prior approval from the KO is required for subcontracting.

Note: If the contractor does not require access to NATO information, requires access to the SIPRNET, mark 10g "No" but mark 10k "Yes" (SIPRNET access) and add the statement below in item 13 that the contractor requires access to the SIPRNET and a NATO awareness brief is required. The SIPRNET contains NATO information and a NATO awareness briefing is required for everyone who needs access to the SIPRNET. The purpose of providing a NATO awareness briefing is to inform personnel how to protect NATO information in the event they come across it while on the SIPRNET. See 10k below for additional information.

10h. Foreign Government Information (FGI) is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the KO is required prior to subcontracting.

10j. Safeguarding "For Official Use Only (FOUO) Information”, Appendix D. FOUO information generated and/or provided under this contract shall be safeguarded and marked as specified in AR 25-55 and DoD 5200.1-M (Marking is in Volume 2).

11a. Access or storage of classified information will be performed at the contractor’s location as stipulated in Section 6.

11c. In the completion of this task, the contractor will receive Classified software and may need to produce modified software.

11d. In the performance of this task, the contractor will receive Classified software on various hard drives (Hardware) that will need to be stored as specified in AR 25-11 and DoD 5200.1

11j. OPSEC requirements are addressed in the Performance Work Statement (PWS).

13a. Contractor personnel performing IT sensitive duties are subject to investigative and assignment requirements IAW AR 25-2, AR 380-67, DoD 8570.0 and affiliated regulations. Army regulation available at www.apd.army.mil

DD-254 Continuation Sheet Solicitation # W15P7T-17-R-0008 Common Hardware Systems – 5th Generation (CHS-5)

13b. The Government Facility Security Officer (FSO) will include Threat Awareness and Reporting Program (TARP) requirements in their initial and refresher training IAW AR 381-12, paragraph 1-14 and Chapter 2.

Certification and Signature: Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

______________________________ 2 August 2017

DATE

Contracting Officers Representative (COR)