CDRL_C002_-_V1+,_V2,_V3_Product_Specs_-_Continuation.docx

DD-1423 Continuation Sheet Solicitation Number: W15P7T-17-R-0008 CDRL C002: V1+/V2/V3/IK/OTC Product Specifications

v. Requirements: (continued)

g. Disposal Requirements: Any special disposal requirement shall be fully defined in this section.

h. Special Tools: Special tools or test equipment shall not be required to be used by CHS-5 equipment

vi. Quality Assurance Provisions (QAP): This paragraph shall provide general information regarding QAPs that the contractor feels is necessary and which is not covered elsewhere in the following sub-paragraphs.

a. Responsibility for Inspections: This paragraph shall state that the responsibility for inspections rests with the contractor and that the Government reserves the right to witness or inspect any or all of the tests specified.

b. Quality Conformance Inspections: This paragraph shall include specific test requirements and procedures for all requirements in section v (requirements) of the item’s product specification. A matrix shall be developed showing the specific requirement from Section 3 and the corresponding test requirement. The test requirements shall be as specified in paragraph 3.4.7 and Attachment 0002 [CHS-5 PWS Appendix A (Survivability, Reliability, Verification)]. The matrix shall show for each requirement the corresponding test method. Examples of methods of test verification follow: inspection (I), analysis (A), test (T), demonstration (D), and certification (C). A matrix showing what tests are required for FAT and for PAT shall be included.

vii. Preparation for Delivery: This paragraph shall specify the applicable requirements for preservation and packaging of the item. The requirements for this paragraph shall be as delineated in the contract clauses.

viii. Notes: This section shall contain information of a general or explanatory nature and no requirements shall appear herein. Examples of the type of information that would belong here include: intended use, ordering data, definitions, abbreviations and acronyms.

d. Distribution Statement D: Distribution authorized to the DoD and DoD contractors only (critical technology) (25 February 2009). Other requests shall be referred to PdL CHS.