Exhibit_18_Pricing_Charts.pdf

Pricing Charts

Painting and Caulking

Exhibit 18

NNG16572637R

The quantities included below are estimated only and are not to be construed and/or interpreted as the quantities that will be ordered under the Firm-Fixed-Price IDIQ portion of this contract.

CONTRACT YEAR 1

Item Description Unit

Price

Unit Quantity Price

1 Interior Painting of plaster, gypsum wall board, masonry surfaces

SF X 1000

2 Interior Painting Application of one additional finish coat on plaster, gypsum wallboard and masonry surfaces

SF X 2000

3 Interior Painting: Painting of wood or metal surfaces where they occur as trim, SF X 200

4 Interior Painting: Application of one additional coat of finish materials for wood or metal surfaces

SF X 500 $

5 Exterior Painting: In accordance with SSPC-SP-2 Hand

Tool Cleaning

SF X 100 $

6 Painting: In accordance with SSPC-SP-3, Power Tool

Cleaning

SF X 100 $

7 Exterior Painting: Using high pressure water blasting, prepare surfaces of concrete or masonry where they occur

SF X 100 $

8 Exterior Painting: Apply 1 prime and 1 finish coat of paint materials on wood surfaces

SF X 200 $

9 Exterior Painting: Apply 1 prime and 1 finish coat of paint materials on concrete or masonry walls

SF X 200 $

10 Exterior Painting: Apply 1 prime and 1 finish coat of paint materials on ferrous metal surfaces

SF X 1000 $

11 Exterior Painting: Apply 1 prime and 1 finish coat of paint materials on non-ferrous metals

SF X 200 $

12 Interior Cove Base: Remove existing 4” or 6” vinyl cove or vinyl straight base and install new 4” or 6” high, 1/8” thick vinyl cove base

LF X 200 $

13 Caulk joints, windows, and expansion joints up to 20 feet above finished floor or grade

LF X 100 $

14 Caulk joints, windows, and expansion joints up to roof line in areas above 20 feet from finished floor or grade

LF X 100 $

15 Installation of back up filler LF X 100 $

TOTAL ESTIMATE FOR CONTRACT YEAR 1

Escalation Rate (%) Total Price

Contract Year 2

Contract Year 3

Contract Year 4

Contract Year 5

Concrete Paving and Traffic Control

Exhibit 18

NNG16572637R

The quantities included below are estimated only and are not to be construed and/or interpreted as the quantities that will be ordered under the Firm-Fixed-Price IDIQ portion of this contract.

CONTRACT YEAR 1

Item Description Scope of Work Unit Price Unit Quantity Price

1 Hot Mix Asphalt Overlay The unit of measure shall be the ton. Hot mix asphalt overlay shall be the installation of the overlay tonnage.

TON X 20

2 Cold Milling The unit of measure shall be the square feet. Cold milling shall mill asphalt to a depth of 2-inch and dispose off-site.

SF X 1000

3 Paving Fabric The unit of measure shall be the square feet. Paving fabric shall be the square feet of paving fabric installed.

SF X 100

4 Road Section The unit of measure shall be the square feet. Road section shall be 8-inch graded aggregate base, 4-Inch asphalt base, tack, and 2-

Inch asphalt surface.

SF X 100

5 Road Patch The unit of measure shall be the square feet. Road patch shall be removal of existing disposed off-site and new 8-inch graded aggregate base, 4-Inch asphalt base, tack, and 2-Inch asphalt surface.

SF X 50

6 Crack Sealant - Small The unit of measure shall be the linear foot. Crack sealant small shall be filling cracks 1/8 inch to 3/4 inch.

LF X 25

7 Crack Sealant - Medium The unit of measure shall be the linear foot. Crack sealant medium shall be filling cracks 3/4 inch to 2 inch.

LF X 25

8 Temporary Cold Patch The unit of measure shall be the square feet. Temporary cold patch shall be removal of existing disposed off-site and new 8 inch depth temporary cold patch.

SF X 50

9 CLSM The unit of measure shall be the cubic yard. CLSM shall be the cubic yards installed complete. Any excavation required shall be paid for separately.

CY X 10

10 Stone The unit of measure shall be the ton. Stone shall be as placed and compacted with surface (topsoil, soil, stone) removed and disposed off-site.

TON X 5

11 class 1 Riprap The unit of measure shall be the square feet. Riprap shall be riprap and geotextile placed with surface (topsoil, soil, stone) removed and disposed off-site.

SF X 50

12 Underdrain The unit of measure shall be the linear foot. Underdrain shall be with underdrain pipe, geotextile, and stone placed below 4 inch of topsoil. Additional excavation for deeper installation shall be paid for separately.

LF X 25

13 Excavation of paved areas and dispose off-site

The unit of measure shall be the cubic yard. Excavation of paved areas shall be disposed of off-site.

CY X 20

14 Excavation of non-paved areas and dispose off-site

The unit of measure shall be the cubic yard. Excavation of non-paved areas (topsoil, soil, stone) shall be disposed of off-site.

CY X 20

15 Roadway Striping - Thermoplastic The unit of measure shall be the linear foot of applied material.

The unit shall be per foot of single line stripe. Lines shall be thermoplastic. Centerlines shall be double yellow, 4-inch line, 4-inch space, 4-inch line. Lane lines shall be white, 4-inch line, solid or skipped. Edge lines shall be white, 4-inch line.

LF X 100

16 Roadway Striping - Paint The unit of measure shall be the linear foot of applied material.

The unit shall be per foot of single line stripe. Centerlines shall be double yellow, 4-inch line, 4-inch space, 4-inch line. Lane lines shall be white, 4-inch line, solid or skipped. Edge lines shall be white, 4-inch line.

LF X 1000

17 Crosswalk Striping The unit of measure shall be the linear foot. Crosswalk striping shall be thermoplastic 22-ft length, 6-ft minimum width. The width shall be adjusted slightly wider if needed to enclose the curb ramp. Install 45-degree white diagonal lines, 4-ft center-to-center. All lines shall be 12-inch wide.

LF X 100

18 MUTCD "ONLY" and Arrow Shapes The unit of measure shall be each. MUTCD "ONLY" and arrow shapes shall be preformed thermoplastic with all characters and shapes necessary for the complete word or symbol.

EA X 1

19 Stop Bar Striping The unit of measure shall be each. Stop bars shall be thermoplastic, white, 12-inch wide, 11-ft length.

EA X 1

Exhibit 18

NNG16572637R

20 Curb Striping The unit of measure shall be the linear foot. Curb striping shall be paint with the top (6 inch) and face (8 inch) of curb painted yellow or red.

LF X 100

21 Parking Lot Striping The unit of measure shall be the linear foot. Parking lot striping shall be paint, with space lines white 4-inch wide. No parking lines shall be yellow, 4-inch wide, spaced 8-ft center-to-center.

LF X 1000

22 Reserved Parking Stenciling (per space)

The unit of measure shall be per each space. Reserved parking stenciling shall be paint, white, 12-inch high, and includes up to 3 rows of stenciling, maximum 20 total characters/numbers.

Stencils outside of spaces shall be yellow.

EA X 1

23 Accessible Space Striping: 3-edge blue border + international symbol

The unit of measure shall be each. Accessible space striping shall be paint, with a 4 inch blue line within a 4 inch white line on each side, and the top and face of curb painted blue (or the end of the space painted blue if not against a curb), and including a 4 ft x 4 ft blue background containing a 3 ft x 3 ft international symbol of accessibility centered within. Stroke width of symbol shall be 3-

1/2 inch. The background/symbol shall be placed in the lower 1/3 of the space. An access aisle consisting of 4 inch yellow striping placed diagonally at 4 ft on center shall be adjacent to the space.

Space and access aisle shall be 9 ft width each, for approximately

18 ft total width.

EA X 1

24 Wood Sign Post The unit of measure shall be each. The wood sign post shall be complete with no signage. The post shall be of sufficient height to mount a traffic sign at a height of 7 feet to the bottom of the sign, and extend to the top of the sign.

EA X 5

25 Traffic Sign The unit of measure shall be the square feet. Traffic sign shall be size, colors, and legend as required. Includes removal and disposal of old sign. Sign post shall be a separate item.

SF X 5

26 Pavement Sweeping The unit of measure shall be the acre. Pavement sweeping includes integrated mechanical brushing to dislodge adhered particles and vacuuming of all loosened particles, dust, etc., and disposed off-site. Hand sweeping shall be applied at areas inaccessible to truck.

ACRE X 2

27 Concrete Paving The unit of measure shall be the square feet. Concrete paving shall be 4-inch drainage fill, 8-inch thick concrete, with 6x6-

W4xW4 WWR.

SF X 100

28 Concrete Sidewalk The unit of measure shall be the square feet. Concrete sidewalk shall be 4-inch drainage fill, 4-inch thick concrete, with 6x6-

W1.4xW1.4 WWR.

SF X 100

29 Detectable Surface (Cast): 2-FT x 3-

FT

The unit of measure shall be each. Detectable surface shall be installed in new concrete. Concrete shall be paid for separately.

EA X 1

30 Detectable Surface (Surface): 2-Ft x

3-FT

The unit of measure shall be each. Detectable surface shall be installed on existing concrete.

EA X 1

31 Remove/Replace Concrete Sidewalk The unit of measure shall be the square feet. Remove/Replace concrete sidewalk shall be remove existing disposed off-site and install new 4-inch drainage fill, 4-inch thick concrete, with 6x6-

W1.4xW1.4 WWR.

SF X 200

32 Concrete Curb The unit of measure shall be the linear foot. Concrete curb shall be 6-inch wide, 18-inch depth, with 6-inch reveal.

LF X 50

33 Remove/Replace Concrete Curb The unit of measure shall be the linear foot. Remove/replace concrete curb shall remove existing curb disposed off-site and install new 6-inch wide, 18-inch depth, with 6-inch reveal.

LF X 100

34 Concrete Curb and Gutter The unit of measure shall be the linear foot. Concrete curb and gutter shall conform to Prince George's County DPW&T Standard

300.01, Concrete Curb and Gutter.

LF X 50

35 Remove/Replace Concrete Curb and

Gutter

The unit of measure shall be the linear foot. Remove/Replace concrete curb and gutter shall remove existing and install new conforming to Prince George's County DPW&T Standard 300.01, Concrete Curb and Gutter.

LF X 50

36 Concrete Stairs The unit of measure shall be the square feet. Concrete stairs shall be 6-inch riser height, 12-inch tread depth, with 6x6-W1.4xW1.4

WWR.

SF X 25

Exhibit 18

NNG16572637R

37 Manhole or Inlet Adjustment The unit of measure shall be each. Manhole or inlet adjustment shall be in lawn or pave areas and shall install either cast iron grade ring or concrete grade ring to match minor grade changes.

EA X 1

38 Water Valve Box Adjustment The unit of measure shall be each. Water valve box adjustement shall be in lawn or pave areas and shall install cast iron extensions to match minor grade changes. In lawn areas a 12 inch x 12 inch x 4 inch concrete apron shall surround the valve box.

EA X 1

39 Electrical Handhole Box Adjustment The unit of measure shall be each. Electrical handhole box adjustment shall be in lawn areas to raise or lower existing electrical handhole boxes to match minor grade changes.

EA X 1

40 Traffic Control The unit of measure shall be the hour. This item is used only for dedicated flagging operations when required to maintain 2-way traffic movement during lane closures. Flagmen shall be certified to safely perform operations in accordance with Maryland

MUTCD. Other traffic control such as message boards, arrow panels, signs, cones, barrels, barricades, etc., shall be provided by the Contractor as required to install and protect each item of work without separate payment of traffic control.

HOUR X 2

TOTAL ESTIMATE FOR CONTRACT YEAR 1 $

Escalation Rate (%) Total Price

Contract Year 2

Contract Year 3

Roofing Management Program

Exhibit 18

NNG16572637R

The quantities included below are estimated only and are not to be construed and/or interpreted as the quantities that will be ordered under the Firm-Fixed-Price IDIQ portion of this contract.

CONTRACT YEAR 1

CLIN Description Unit Price Unit Quantity Price

1 Sheet metal work, aluminum, other than gutters and downspouts. SF X 10

2 Sheet metal work, aluminum gutters, including accessories. SF X 10

3 Sheet metal work, aluminum downspouts, including accessories. SF X 10

4 5-inch OG aluminum gutters. LF X 25

5 3-inch X 4-inch rectangular aluminum downspout. LF X 25

6 Gutter hanger or bracket, downspout strap, end cap or slip joint connector. EA X 1

7 Elbow (any size) or miter or drop outlet section in gutter. EA X 1

8 Membrane base flashing consisting of modified bitumen membrane SF X 100

Tear off and remove existing asphalt shingle roofing system. Remaining surface cleaned and prepared for reroofing SF X 100

Apply prime coating, asphaltic emulsion topping, and EPA Energy Star certified aluminum reflective coating over asphaltic built-up roofs or modified bitumen roof membranes. Includes removal of ballast where applicable. SQ X 50

Apply primer and base coats and EPA Energy Star certified acrylic or equal

Elastomeric top coating over asphaltic built-up, modified bitumen, or CSPE roof membranes. Includes any necessary roof preparation and cleaning. SQ X 50

Add modified SBS mineral surface inorganic cap sheet fully adhered with torch welding over built-up roof membrane. Includes any necessary roof preparation and cleaning. SQ X 10

12 Perform infrared inspection of roof. SQ X 100

13 Provide and install walking pads on Built-Up or Modified Bituminous roofs SF X 100

Furnish and install asphalt shingle roofing system on bare roof deck. Slopes 4:12 -

8:12. with single ply 15# felt. SQ X 10

Furnish and install single ply reinforced modified bitumen Membrane roofing system over wood deck, including elastomeric flashing and accessories. (R30 Insulation) SQ X 20

Furnish and install single ply reinforced modified bitumen Membrane roofing system over concrete deck. (R30 Insulation) SQ X 50

Furnish and install single ply reinforced modified bitumen Membrane roofing system over steel deck. (R30 Insulation) SQ X 50

Heat apply 18-inch wide (minimum) strip of single ply modified bitumen membrane over split, tear, or break in existing mod bit single ply membrane or built up roof membrane. Includes preparation of existing surface and finishing new surface to match existing roof field. Includes tear-off and disposal of affected existing roofing. SF X 100

Replace localized deteriorated or damaged single ply modified Bitumen membrane or

BUR membrane with new mod bit heat applied Membrane and mod bit base flashing as needed. Includes preparation of existing surface and finishing new surface to match existing roof field. Includes tear-off and disposal of affected existing roofing. SF X 100

TOTAL ESTIMATE FOR CONTRACT YEAR 1 $

Escalation Rate (%)

Total

Price

Contract Year 2

Contract Year 3

Asbestos Abatement Program

Exhibit 18

NNG16572637R

The quantities included below are estimated only and are not to be construed and/or interpreted as the quantities that will be ordered under the Firm-Fixed-Price IDIQ portion of this contract.

Contract Year 1

Normal

Working

Hours Quantity Price

PREPARATION

A.1 Furnish all labor and materials to fabricate and install a THREE-STAGE decontamination facility in accordance with federal requirements.

EA X 1

A.2 Furnish all labor and materials to fabricate and install a TWO-STAGE (no shower) decontamination facility in accordance with current federal requirements for use during glove bag operations.

EA X 1

A.3 Furnish all labor and materials to construct a temporary partition. The partition must be at least seven feet in height and constructed of plywood, sheetrock or similar material. This line item includes dismantling of the partition at the completion of all work. LF X 100

A.4 Install 6-mil thick polyethylene sheeting for use in constructing containment, covering items, as a drop cloth, etc. This line item includes encapsulation, dismantling and disposal.

SF X 100

A.5 REMOVE asbestos-contaminated debris up to 6 inches in depth. This line item is intended for pre-cleaning applications where significant quantities of visible debris are present.

SF X 100

CEILING / WALLS

A.6 REMOVE asbestos-containing or asbestos-contaminated suspended acoustical lay-in ceiling tile, including suspension system and accessories.

a Height up to 12’ SF X 100 b Height above 12’ SF X 100

A.7 REMOVE asbestos-containing materials from planar surfaces (ceiling and walls) down to bare substrate. Encapsulate entire surface with an EPA-approved lock-down encapsulant via an airless sprayer.

SF X 100

A.8 REMOVE layer of VAT friable ACM floor tiles a Up to 1000 SF per job SF X 1000 b over 1000 SF per job SF X 1500

Cut access holes in asbestos - containing X 10 wall or ceiling

DRYWALL PARTITIONS

A.10 REMOVE existing wood or metal stud drywall partitions where the partition abuts asbestos-containing material. This includes the removal of doors, door frames, electrical outlets, clocks, and switches, and all wiring back to the next junction box or outlet box.

Return all doors, frames and hardware to the government.

SF X 100

A.11 REMOVE horizontal or vertical pipe enclosure covers to gain access to asbestos-containing pipe insulation material. These covers are typically single sheeted, three-sided sheet metal, and are screwed together.

SF X 100

DUCTWORK

A.12 ENCAPSULATE asbestos-containing materials on round ductwork, including all hangers or other type of fasteners. Encapsulation is to be accomplished via an airless sprayer and an EPA-approved lockdown encapsulant. Diameters listed below include insulation. SF X 25

A.13 ENCAPSULATE asbestos-containing materials on flat ductwork, fan enclosures, or similar equipment. Encapsulation is to be accomplished via an airless sprayer and an EPA-approved lockdown encapsulant. Diameters listed below include insulation. SF X 25

A.14 REMOVE asbestos-containing materials on round ductwork, including all hangers or other type of fasteners. Encapsulation is to be accomplished via an airless sprayer and an

EPA-approved lockdown encapsulant. Diameters listed below include insulation. SF X 25

A.15 REMOVE asbestos-containing materials from flat ductwork, fan enclosures, or similar equipment. Encapsulation is to be accomplished using lockdown encapsulant. SF X 25

Item Description Unit

Unit Price

Non-

Working

Hours

A.9

SF

Asbestos Abatement Program

Exhibit 18

NNG16572637R

A.16 ENCAPSULATE asbestos-containing material on piping. Encapsulation is to be accomplished using lagging material and EPA-approved bridging mastic, Outside diameters below include insulation.

a Less than 2 inch LF X 50 g 2-6 inches LF X 25 h 7-12 inches LF X 10 i 14-20 inches LF X 10

A.17 REMOVE asbestos-containing material on piping. Encapsulation is to be accomplished using an airless sprayer and an EPA-approved lockdown encapsulant. Outside diameters below include insulation.

a Less than 2 inch LF X 50 b 2 -6 inch LF X 25 c 7-12 inch LF X 10 d 14 - 20 inch LF X 10

A.18 REMOVE asbestos-containing materials on tanks, boilers, breaching, heat exchangers and related equipment. Encapsulate utilizing bridging encapsulant or lagging. SF X 25

GLOVEBAGS

A.19 Set up standard glove bag on structure fore asbestos removal. Remove contents of glove bag. Encapsulate substrate with sprayer. Remove glove bag upon completion. EA. X 10

MISCELLANEOUS

A.20 APPLY wet-wrap, material to exposed asbestos edges, whole edges or damaged asbestos-containing materials.

SF X 25

A.21 DECONTAMINATE horizontal and vertical surfaces by HEPA-vacuuming, wet-wiping and encapsulating surface with an EPA approved lock-down encapsulant and an airless sprayer. This line item is intended for surfaces within full containments where there are not substantial visible quantities of debris on the surfaces.

a Surfaces up to 10 feet in height SF X 25 b Surfaces greater than 10 feet. in height SF X 25

A.22 Provide an industrial hygienist to conduct asbestos abatement oversight and air monitoring services to conform to all applicable OSHA and EPA regulations 4 hour minimum.

HR X 40

A.23 Conduct on-site asbestos air sample analysis in accordance with NIOSH Method 7400

Phase Contract Microscopy.

HR X 5

TOTAL ESTIMATE FOR CONTRACT YEAR 1

Escalation Rate (%) Total Price

Contract Year 2

Contract Year 3

Pricing Chart Summary Exhibit 18

NNG16572637R

Exhibit Year 1 Year 2 Year 3 Year 4 Year 5 Total

Exhibit 18 - Painting & Caulking $0.00

Exhibit 18 - Concrete Paving & Traffic $0.00

Exhibit 18 - Roofing Mgmt Program $0.00

Exhibit 18 - Asbestos Abatement $0.00

Grand Total $0.00