Attachment 11 17 March 2020.pdf

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF

DEFENSE AND BMS CONTRACTORS ONLY; ADMINISTRATIVE OR OPERATIONAL USE. OTHER

REQUESTS FOR THIS DOCUMENT MUST BE REFERRED TO THE NAVAL SURFACE WARFARE

CENTER DAHLGREN DIVISION, BMS PM IN H40, DAHLGREN, VA 22448.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED

BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC. 2751, et seq.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED (TITLE 50, U.S.C., APP 2401, et seq). VIOLATIONS

OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION DOCUMENTS

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED BY

THE DESIGN ACTIVITY.

1:1

SK115265

INTERPRET DRAWING IAW ASME Y14.100

8 7 6 5 4 3 1

D

C

B

A

D

C

B

A

8 7 6 5 4

.005

2 1

ANEXT ASSY USED ON

APPLICATION

DAI

D

DWG NO. REV

SCALE:

UNIT WEIGHT:

DEPARTMENT OF THE NAVY

C:\PDM\PSP GWS\05_PROTOTYPE\INSTALLATION, AIRCRAFT, 105MM\RECOIL MECHANISM\ SK115265 Wednesday, March 27, 2019 11:25:48 AM adam.snyder

PER Y14.5-2009

2019-01-25

TOL ON ANGLE

1 PL

BY: adam.snyder

.01 3 PL

CWC

LAST SAVED DATE: Wednesday, March 27, 2019 11:25:48 AM

SHEET

INTERPRET DIMENSIONS AND TOLERANCES

2019-01-25

TITLE

DSGN ENGR

DIMENSIONS ARE IN INCHES

COMMANDER DAHLGREN DIVISION

MATERIAL:

DO NOT SCALE THIS DRAWING

PART NAME/VERSION: 115265/ -1 (UPPER)

6149 WELSH RD, SUITE 203

CHECKED

SEE TABLE 1

THIRD ANGLE PROJECTION

NAVAL SURFACE WARFARE CENTER

- 2 PL

DATEFILE LOCATION: C:\PDM\PSP GWS\05_PROTOTYPE\INSTALLATION, AIRCRAFT, 105MM\RECOIL MECHANISM\ 07609

PSP-GWS

ROD ASSEMBLY,

DAHLGREN, VA 22448-5000

DRAWN SIZE

SPRING LOADEDLEAD ENGR MTB

TKH

APPROVED

2019-01-28

NSWC D-SIZE BMS-00-Z00.01-TMPL-0000 REV 1.0

UNLESS OTHERWISE SPECIFIED

NOTES:

1. ORIENT PARTS AS SHOWN.

2. INSERT SPRING, FN 6 OR FN 8, BETWEEN WASHERS, FN 5, IN THE TUBE, FN 2, 3 OR 4. COMPRESS SPRING WITH ROD, FN 1, UNTIL THE SPRING PIN HOLE IN THE ROD ALIGNS INSIDE THE SLOT OF THE

TUBE. PRESS IN SPRING PIN, FN 7, UNTIL FLUSH TO SURFACE WITHIN ±.03.

3. VENDOR ITEM - SEE VENDOR ITEM CONTROL DRAWING.

4. PERMANENTLY MARK THE FOLLOWING LEDGEND IN 5/64-1/4 HIGH CHARACTERS IN APPROXIMATE

POSITION SHOWN USING LASER MARK OR DOT PEEN:

"07609ASSYSK115265-[DASH NUMBER]-REV A-VENDOR CAGE-AWARD DATE(YYYYMMDD)" IAW MIL-STD-130.

2.

2.2

2.8

1 2.

SECTION A-A

2X 5 4.

REVISIONS

LTR DESCRIPTION DATE APPROVED

A REVISED PER REDLINE ON SK115265-. 2019-03-27

CCs LOCATION INSPECTION REV

IAW DOD-STD-2101

SUMMATION OF CCs

CRITICAL: 0 MAJOR: 0 MINOR: ALL OTHER

CLASSIFICATION OF CHARACTERISTICS (CCs)

2.

TABLE 1

DASH NO. NEXT ASSY

SK115265-1 SK115273

SK115265-2 SK115273

SK115265-3 110055

FIND

NO.

-1 QTY

REQD

-2 QTY

REQD

-3 QTY

REQD DAI PART NUMBER NOMENCLATURE OR DESCRIPTION MATERIAL

OR NOTE

PARTS LIST

8 1 1 - 74U39 PC105-720-16.900-SST-

4.000-CG-N-IN SPRING, COMPRESSION

ALTN 1 1 1 MS16562-158

NASM16562

PIN, SPRING, TUBULAR, SLOTTED, .250 NOM SIZE,

1.000 LENGTH, CADMIUM COATED

ALTN 1 1 1 MS16562-158

NASM16562

PIN, SPRING, TUBULAR, SLOTTED, .250 NOM SIZE,

1.000 LENGTH, PHOSPHATE COATED

7 1 1 1 MS16562-252

NASM16562

PIN, SPRING, TUBULAR, SLOTTED, .250 NOM SIZE,

1.000 LENGTH, CRES

6 - - 1 109825 SPRING, COMPRESSION

5 2 2 2 SK109826 WASHER, PRESSURE SEAL SUPPORT

4 - - 1 SK115267-3 TUBE, PRESSURE SEAL SUPPORT

3 - 1 - SK115267-2 TUBE, PRESSURE SEAL SUPPORT

2 1 - - SK115267-1 TUBE, PRESSURE SEAL SUPPORT

1 1 1 1 SK115266 ROD, PRESSURE SEAL SUPPORT

2.

2.

2. 3.

2.

2.

2.

2.

2.

SK115265-1 SHOWN

A

A