Bella_House_Kitchen_and_Bathroom_Rehab_Cut_Sheets_-_Addendum_#2.pdf
PDF 5 MB Posted
- Attached to
- Bella House Kitchen and Bathroom Rehab
- Solicitation number
- PW 26-25
- Issued by
- Napa County, California
About this file
This is an Addendum #2 cut sheet document for Napa County's Bella House Kitchen and Bathroom Rehab project, detailing equipment and product specifications for the rehabilitation of kitchen and bathroom facilities at a 12-bed licensed mental health residential facility located at 1046 Bella Drive, Napa, California. The project scope includes selective demolition and replacement of kitchen and bathroom equipment, fixtures, casework, flooring finishes, interior painting, and LED light bulb installation. The mandatory pre-bid job walk was completed on September 24, 2026, with sealed bids due October 6, 2026 at 11:30 a.m., and public bid opening via Teams meeting on the same date. Twenty-nine construction firms attended the mandatory site visit. The contract term is 40 working days from the Notice to Proceed, scheduled for January 11, 2027, with liquidated damages of $1,000 per calendar day for delays beyond the completion period. Work hours are restricted to Monday through Friday, 8:00 a.m. to 5:00 p.m.
The cut sheets specify detailed product selections including Wilsonart HPL casework finishes, Moxy XL luxury vinyl tile flooring, Johnsonite millwork wall base systems, AVONITE acrylic solid surface wet wall materials, and equipment from manufacturers including Kohler, TOTO, LG, and Panasonic. The engineer's estimate is $160,000. Contractors must hold a valid Class B California contractor license and maintain Public Works Contractor registration, with prevailing wage requirements and weekly certified payroll submission required. A 10 percent bid guarantee, performance bond, and labor/material bond equal to 100 percent of contract price are required. A 5 percent retainage will be held from progress payments and released within 60 days of project completion. The facility remains occupied throughout construction with the critical operational constraint that only one restroom may be taken out of service at any given time; contractors must coordinate all activities with facility and county staff to minimize disruption to residents. A minimum 75 percent construction waste diversion rate from landfills is required, with waste management plan submission due within 7 days of Notice to Proceed.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NAPA COUNTY 9/1/2026
BELLA DRIVE REHAB HOUSE Table of Contents-CUT SHEETS Napa, California TOC-1
NAPA COUNTY
BELLA HOUSE KITCHEN AND BATHROOM REHAB PROJECT
EQUIPMENT CUT SHEETS AND PRODUCT DATA SHEETS
TABLE OF CONTENTS SPECIFICATION
SECTION
DIVISION 06 – WOOD, PLASTICS, COMPOSITES
06-01 CASEWORK COLOR (PL-1) 06 40 23
06-02 COUNTERTOP (SSU-1) 06 40 23
DIVISION 09 – FINISHES
09-01 FLOORING (LVT-1) 09 65 19
09-02 4-INCH PVC FLOOR BASE 09 65 13
09-03 SOLID SURFACE WET WALL 09 71 61
09-04 PAINT COLORS (PT-1) 09 91 23
DIVISION 10 – SPECIALTIES
10-01 GRAB BARS 10 28 00
10-02 ROBE HOOK 10 28 00
10-03 TOILET PAPER DISPENSER 10 28 00
10-04 TOWEL BAR 10 28 00
10-05 1/2 INCH CORK BOARD 10 95 00
DIVISION 11 – EQUIPMENT
11-01 MICROWAVE RANGE HOOD 10 95 00
DIVISION 22 – PLUMBING (See specification division 22 otherwise)
22-01 TOILET 10 95 00
22-02 BATH SHOWER TRIM KIT 10 95 00
22-03 SHOWER TRIM KIT 10 95 00
22-04 BATH TUB 10 95 00
22-06 BATHROOM SINK 10 95 00
22-07 BATHROOM FAUCET 10 95 00
22-08 KITCHEN SINK 10 95 00
22-09 KITCHEN FAUCET 10 95 00
DIVISION 23 – HVAC (See specification division 23 otherwise)
23-01 EXHAUST FAN 10 95 00
DIVISION 26 – ELECTRICAL (See specification division 26 otherwise)
26-01 24” WALL LIGHT 10 95 00
26-02 36” WALL LIGHT 10 95 00
26-03 RESTROOM CEILING LIGHT 10 95 00
END OF SECTION
S E
L E
C T
IO
N
S F
R O
M W
IL
S
O N
A R
T
H P
L
Wilsonart Woodgrains™
A N T I Q U E B O U R B O N P I N E 8215K-12
ANTIQUE MARULA
PINE
8216K-28
ITALIAN SILVER ASH
8217K-16
KINGSWOOD WALNUT
8218-38
IVORY BIRCH
8219-38
FRENCH PEAR
8220-38
SAP WALNUT
8221-38
RANDOLPH FOREST
8225K-79
WASHED CHAR
8222K-16
FRISTON ASH
8229K-79
VALLEY FORGE ELM
8231K-79
CONTINENTAL
WALNUT
8232K-05
BELAIR
8234K-05
DAINTREE
8235K-05
MONTEVERDI
8236K-05
FAIRCHILD
8238K-05
CENIZO CHERRY
8239-38
NORWEGIAN ASH
8241-38
JUBILEE OAK
8242-38
MAPLE PB NATURAL
8269K-05
LIMBER MAPLE
10734-60
FONTHILL PEAR
10745-60
KENSINGTON MAPLE
10776-60
NEWLANDS
8268K-17
N E W
ANDERSON CHERRY
8266K-17
N E W
N E W
MAPLE PB CASHMERE
8285K-05
N E W
MAPLE PB NUTMEG
8271K-05
MAPLE PB CHESTNUT
8272K-05
N E W N E W
CHERRY PB NATURAL
8273K-05
N E W
CHERRY PB TOASTED
8274K-05
N E W
CHERRY PB SIENNA
8275K-05
CHERRY PB AUBURN
8276K-05
N E W N E W
WALNUT PB NATURAL
8277K-05
N E W
WHITE OAK PB
WHEATON
8282K-05
WALNUT PB MELLOW
8278K-05
N E W
WALNUT PB COGNAC
8279K-05
N E W
WALNUT PB EMBER
8286K-05
N E W
WHITE OAK PB
NATURAL
8281K-05
N E W N E W
WHITE OAK PB HONEY
8283K-05
N E W
WHITE OAK PB SPICE
8284K-05
N E W
SHAPING
Design Wilsonart Solid Surface is shaping the next generation of engineered surface innovation. Explore an exceptional range of designs that seamlessly blend form and function, delivering unmatched durability and powerful versatility to everyday spaces. How will your project take shape?
O P U L E N T L U X E 9 9 1 8 S S
K E E P E X P L O R I N G A T W I L S O N A R T. C O M / S O L I D - S U R F A C E - N E W - A R R I V A L S
W I L S O N A R T ® S O L I D S U R F A C E https://www.wilsonart.com/solid-surface-new-arrivals
PA R T I C U L A T E S
M O R N I N G I C E 9 2 0 4 C E
Y U K O N R I V E R S T O N E 9 1 9 6 R S
F R O S T Y W H I T E M I R A G E 1 5 7 3 M G
C H A I C R E A M M I R A G E 9 1 1 1 M G
A V A L A N C H E M E L A N G E 9 1 7 5 M L
M Y S T I Q U E 9 2 0 0 C S
P E A R L M I R A G E 9 1 9 9 M G
B L U E S T O N E 9 0 7 4 E A
A N G O R A S A N D S 9 2 5 5 S S
N E W
C H I L L E D E A R T H 9 2 2 8 S S
P O W D E R W H I T E 9 2 3 0 S S
M I L K G L A S S S P E C T R A 9 0 7 7 S T
C O C O N U T O I L 9 1 0 0 G S
W H I T E S T O N E 9 2 0 8 C S
W H I T E W A T E R 9 1 9 8 E A
S H A P I N G D E S I G N
Achieve the distinguished look of extra-wide wood flooring with Moxy XL Coffee Rigid Core Click 9x72 Luxury Vinyl Tile. Inspired by Mingo Oak, its high-definition textured print gives it a realistic wood look, while its extra-large, 9-by-72-inch format makes spaces appear more expansive. Get a good look at a great price with this durable, affordable, easy-to-install LVT.
+5
MOXY XL COFFEE BEIGE RIGID
CORE CLICK 9X72 LUXURY VINYL
PLANK FLOORING
COLORS
Ash Gray Black Chestnut Coffee
LUXURY VINYL PLANK
Coffee https://www.tilebar.com/ https://www.tilebar.com/product/moxy-ash-9x72-rigid-core-click-luxury-vinyl-tile.html https://www.tilebar.com/product/moxy-night-9x72-rigid-core-click-luxury-vinyl-tile.html https://www.tilebar.com/product/moxy-chestnut-9x72-rigid-core-click-luxury-vinyl-tile.html https://www.tilebar.com/product/moxy-coffee-9x72-rigid-core-click-luxury-vinyl-tile.html
FI
N
IS
H
IN
G
B O
R D
ER
S
Millwork Wall Base® System
2 3
System profiles
With the most comprehensive collection of finishing borders in the industry, Johnsonite covers all the details that make a space complete. Choose from a variety of wall base profiles from modern to traditional, along with chair rail, corner guard, quarter rounds, and shoe moulding.
WALL BASE
Ambassador U.S. Patent No. D500,149 Attaché Delineate Diplomat Equinox Exhibit
4" MW-XX-K 6" MW-XX-E 4.25" MW-XX-T 4.5" MW-XX-A 4.5" MW-XX-R 4.25" MW-XX-FS (shown above)
6" MW-XX-FS6
8" MW-XX-FS8
Inflection U.S. Patent No. D499,193 Ledge Mandalay U.S. Patent No. D493,895 Monarch Monument Oblique
5.25" MW-XX-G 6" MW-XX-X62 2.5" MW-XX-H25
3" MW-XX-H3
4.5" MW-XX-H (shown above)
6" MW-XX-H6
6" MW-XX-M 2.5" MW-XX-S25
4" MW-XX-S4 (shown above)
3" MW-XX-N
Outline U.S. Patent No. D484,254 Recessed Reveal U.S. Patent No. D484,253; D510,145 Silhouette Stance
3.5" MW-XX-D 6" MW-XX-X63 4.25" MW-XX-F (shown above)
6" MW-XX-F6
8" MW-XX-F8
4" MW-XX-J 4.5" MW-XX-X60 (shown above)
6" MW-XX-X61
ACCESSORIES
Rampart (chair rail) Corner Guard Shoe Moulding Quarter Round Quarter Round
4" CHR-XX-C VBG-XX-C 1.5" SHU-XX-A 0.5" QTR-XX-A 0.75" QTR-XX-D
NEW
NEW
NEW NEW
Color palette availability
Johnsonite Millwork® is available in all solid colors plus 00 unfinished.
Available in Masquerade palette
MM
M
M
M M M
M
All Johnsonite Millwork profiles are available in standard 8' lengths.
Rampart® (chair rail)
CHR-XX-C
.375"
4"
.25"
6"
Attaché
MW-XX-E
4.5"
.375"
Diplomat®
MW-XX-A
4"
.375"
Ambassador
MW-XX-K
4.25"
.4"
Delineate
MW-XX-T
5.25"
.375"
Inflection
MW-XX-G
4.5"
.375"
Mandalay
MW-XX-H
4.5"
.375"
Equinox
MW-XX-R
4"
.5"
Silhouette®
MW-XX-J
3.5"
.313"
Outline®
MW-XX-D
6"
.19"
Monarch
MW-XX-M
4.25"
.25"
Reveal®
MW-XX-F
3"
.375"
Oblique®
MW-XX-N
4"
.25"
Monument
MW-XX-S4
6"
Recessed
MW-XX-X63
NEW
.35"
4.5"
.35"
Stance
MW-XX-X60
NEW
.35"
6"
Ledge
MW-XX-X62
NEW
4.25"
.25"
Exhibit
MW-XX-FS
NEW
Shoe Moulding
SHU-XX-A
1.5"
.25"
Corner Guard
VBG-XX-C
1.25"
1.25"
.25"
Quarter Round
0.5" QTR-XX-A
0.75" QTR-XX-D
.75"
.5"
.5"
.75"
10 11
Since the early 1960s, the Johnsonite name has been synonymous in the flooring industry with lasting quality, creative flexibility, and unwavering integrity.
With the category's broadest selection of patterns, textures, colors, and profiles—plus the ability to match any tailored palette with quick lead times and low minimums—we'll help you turn what used to be basic rubber tile and finishing accessories into fully coordinated design statements.
We come to work every day to help you win, crafting solutions you can rely on. That's why Made Right Means Johnsonite.
ColorMatch® palette We’ll perfectly match 32 leading colors across Johnsonite’s rubber and vinyl product categories without dye lots
Design flexibility Industry’s broadest selection of colors, patterns, textures and profiles
Healthy materials Free of ortho-phthalates, PFAS and antimicrobials
Made in USA Designed and manufactured in USA;
Buy American Act Compliant
Tailored by Tarkett Precisely match any color with quick lead times and low minimum order quantities
Discover Johnsonite
Meet Tony, the production manager who helps ensure that all Johnsonite products are made right, including the expanded Millwork collection now available in four new profiles and more than 100 stylish colors. If you don’t see the color you need, Tony and his team will create it for you with quick lead times and low minimum order quantities.
ColorMatch®
Perfectly matched flooring and accessories, made easy. This designer palette of leading colors is coordinated across multiple product categories with no dye lots…ever! Our rigorous manufacturing and quality standards enable you to confidently mix and match a color across all Johnsonite rubber and vinyl products, including flooring, finishing borders, and finishing accessories. We guarantee these colors will match year after year, product after product.
08 Icicle W * 24 Grey Haze WG * 55 Silver Grey WG * 32 Pebble WG * 29 Moon Rock WG *
01 Snow White W * 22 Pearl CB * 31 Zephyr CB * 80 Fawn CB * TA8 Welsh Castle CB *
11 Canvas WB * 09 Clay WB * 49 Beige WB * 45 Sandalwood WB * 76 Cinnamon
283 Toast 47 Brown TB1 Peppercorn 167 Fudge 40 Black B *
21 Platinum CG * 38 Pewter CG * 28 Medium Grey CG * 71 Storm Cloud CG * TA6 Bedrock CG *
48 Grey WG * 20 Charcoal WG * TA4 Gateway WG * 63 Burnt Umber B * 44 Dark Brown B *
* See the Color Foundations key on page 8.
86 Hunter Green 18 Navy Blue krt Rectangle krt Arrow
AVONITE™ WET WALL™
Acrylic Solid Surface
Connecting ideas with solutions� aristechsurfaces.com trinseo.com https://www.aristechsurfaces.com https://www.trinseo.com
The need for a clean environment does not mean having to compromise on design
Hygiene Counts
Wellness, Hospitality, Healthcare, Education, Military and more — There is no material that allows for greater cleanliness. AVONITE™ WET WALL™ 100% Acrylic Solid Surface 6 mm sheets do not absorb bacteria, prevent mold and mildew, can be cleaned using common household products, are seamlessly assembled, and the material malleability makes it possible to design curved, rather than angular, corners, for more efficient cleaning.
Impervious
AVONITE™ WET WALL™ 6 mm sheets have been designed to resist a long list of chemical products, including chloric acid. This material for architectural designs and utilitarian surfaces is exceptionally weatherable, strong, non-porous, scratch and stain resistant.
Easy Install
AVONITE™ WET WALL™ 100% Acrylic Solid Surface 6 mm sheets come in various standard and custom sizes to meet the marketplace needs. Standard width options include 36 in., 48 in., and 60 in. wide in a 96 in.
length (914 mm, 1219 mm, 1524 mm, and 2438 mm).
Singular solid surface panels create incredible time savings and cost efficiencies. Fundamentals of installation include plumb walls, measuring twice, cut, shim and attach to backboard with silicone and hot melt (see our AVONITE™ Fabrication Guide for details).
Aesthetic You Need
AVONITE™ WET WALL™ 6 mm sheets are available in our most sought-after colors as well as custom colors (minimums required).
AVONITE™ WET WALL™ 6 mm made-to-order and additional colors or sizes are available with minimum order quantities. Contact your representative for details.
White 8016
Haze 8514
Super White 8026
Mist 8512
Ivory 8106
Oxbow 8510
Bone 8010
Kokoura 9117
Dove Grey 8231
Polaris 8256
Galactic Ice 7790
Sandstorm 9036
Snowfall 8090
Standard Colors
Made-to-Order Colors
#37334F
RGB: 55, 51, 79
CMYK: 81, 80, 43, 38
PPG1169-7
White Text
P1
#595378
RGB: 89, 83, 120
CMYK: 72, 71, 31, 13
PPG1169-6
White Text
P2
#8B8BA5
RGB: 139, 139, 165
CMYK: 49, 43, 22, 1
PPG1169-5
Black Text
P3
#C4C4D6
RGB: 196, 196, 214
CMYK: 22, 19, 7, 0
PPG1169-4
Black Text
P4
#E0DFEA
RGB: 224, 223, 234
CMYK: 11, 9, 2, 0
PPG1169-3
Black Text
P5
#3E5634
RGB: 62, 86, 52
CMYK: 72, 44, 86, 39
PPG1130-7
White Text
G1
#617C4F
RGB: 97, 124, 79
CMYK: 64, 34, 80, 16
PPG1120-7
White Text
G2
#9DB37E
RGB: 157, 179, 126
CMYK: 44, 16, 66, 0
PPG1120-6
Black Text
G3
#CBD7A7
RGB: 203, 215, 167
CMYK: 22, 6, 41, 0
PPG1120-4
Black Text
G4
#E3E8D6
RGB: 227, 232, 214
CMYK: 10, 4, 17, 0
PPG1120-2
Black Text
G5
#304F56
RGB: 48, 79, 86
CMYK: 82, 56, 53, 33
PPG1148-7
White Text
T1
#446A70
RGB: 68, 106, 112
CMYK: 76, 46, 47, 17
PPG1148-6
White Text
T2
#82AAAD
RGB: 130, 170, 173
CMYK: 51, 22, 30, 0
PPG1148-5
Black Text
T3
#BAD2D3
RGB: 186, 210, 211
CMYK: 27, 8, 15, 0
PPG1148-3
Black Text
T4
#E1EEEE
RGB: 225, 238, 238
CMYK: 11, 1, 5, 0
PPG1148-1
Black Text
T5
#853A28
RGB: 133, 58, 40
CMYK: 31, 82, 87, 33
PPG1067-7
White Text
R1
#B25B39
RGB: 178, 91, 57
CMYK: 23, 72, 85, 11
PPG1191-7
White Text
R2
#E39D7A
RGB: 227, 157, 122
CMYK: 9, 43, 53, 0
PPG1192-5
Black Text
R3
#E9C1A4
RGB: 233, 193, 164
CMYK: 7, 25, 34, 0
PPG1195-4
Black Text
R4
#F3DBCB
RGB: 243, 219, 203
CMYK: 3, 14, 17, 0
PPG1195-3
Black Text
R5
#9C6928
RGB: 156, 105, 40
CMYK: 32, 58, 100, 17
PPG16-15
White Text
Y1
#B97C2B
RGB: 185, 124, 43
CMYK: 24, 53, 100, 7
PPG1207-7
Black or large white
Y2
#DDB378
RGB: 221, 179, 120
CMYK: 13, 29, 60, 0
PPG1207-5
Black Text
Y3
#E5CFA8
RGB: 229, 207, 168
CMYK: 10, 17, 36, 0
PPG1207-4
Black Text
Y4
#EFE2C7
RGB: 239, 226, 199
CMYK: 6, 9, 22, 0
PPG1207-3
Black Text
Y5
White Text #384A66
RGB: 56, 74, 102
CMYK: 84, 69, 39, 24
PPG1164-7
B1
White Text #627188
RGB: 98, 113, 136
CMYK: 67, 51, 33, 8
PPG1164-6
B2
Black Text #8290A6
RGB: 130, 144, 166
CMYK: 53, 38, 24, 1
PPG1164-5
B3
Black Text
#AEBBD0
RGB: 174, 187, 208
CMYK: 31, 20, 9, 0
PPG1164-4
B4
Black Text
#D6DFE7
RGB: 214, 223, 231
CMYK: 15, 7, 5, 0
PPG1164-3
B5
Black Text
#DEB408
RGB: 222, 180, 8
CMYK: 0, 18, 100, 15
PPG1210-6
AY
Black Text
#9AB329
RGB: 154, 179, 41
CMYK: 32, 0, 100, 19
PPG1219-6
AG
White Text #242133
RGB: 36, 33, 51
CMYK: 81, 78, 51, 61
PPG1013-7
PH
PPG1207-1
W2
PPG1001-1
W1
Make things pop against darker colors by using accent colors (above) as a splash of brilliance, like in a button, an icon, or a thin border.
Lighter value colors in the bottom three rows are for maps, charts, graphs, etc. when you need extra colors that harmonize with the darker color options.
ACCENT COLORS MAIN COLORS
WEBSITE HEADER
WHITE PAINTS
UPDATED 03.01.2024 NAPA COUNTY BRANDING
BRAND COLORS
Squares are digital colors and circles are their closest match in PPG paint colors. Text on the color blocks indicates the best ADA-compliant option for text color over each color. Standard text is 12pt and large text means 18pt+.
For easy reference, each color set has a unique two-character ID code in bold.
Contemporary | K-14561 18" grab bar
Available Colors/Finishes Color tiles intended for reference only.
BN Vibrant Brushed Nickel BV Vibrant Brushed Bronze BL Matte Black 2MB Vibrant Brushed Moderne Brass BGP Vibrant Brushed Graphite
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 18:11 - US-CA
https://www.kohler.com/ https://www.kohler.ca/
Contemporary | K-14562 24" grab bar
Features
24" (610 mm) bar
Contemporary styling matches any decor
Available Colors/Finishes Color tiles intended for reference only.
SN Vibrant Polished Nickel BV Vibrant Brushed Bronze BL Matte Black BGP Vibrant Brushed Graphite
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-28-2026 18:1 - US-CA
K-14564 Contemporary 36" grab bar
Features
36" (914 mm) bar
Contemporary styling matches any decor
Available Colors/Finishes Color tiles intended for reference only.
SN Vibrant Polished Nickel BS Brushed Stainless BV Vibrant Brushed Bronze BL Matte Black 2MB Vibrant Brushed Moderne Brass BGP Vibrant Brushed Graphite
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-28-2026 18:4 - US-CA
Buckley™ | K-35933 Robe hook
Features
Coordinates with other products in the Buckley collection
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Codes/Standards None Applicable
Material
Premium metal construction for durability and reliability
KOHLER finishes resist corrosion and tarnishing
Recommended Products/Accessories
K-23723 Faucet cleaner
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Ø 2-7/16" (62 mm)
2-15/16" (75 mm)
3-15/16" (100 mm)
Installation
Installation hardware included
Installation Notes Install this product according to the installation instructions.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Buckley™ | K-35934 Toilet paper holder
Features
Coordinates with other products in the Buckley collection
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
Codes/Standards None Applicable
Material
Premium metal construction for durability and reliability
KOHLER finishes resist corrosion and tarnishing
Recommended Products/Accessories
K-23723 Faucet cleaner
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
3-11/16" (94 mm)
6-1/4" (159 mm)
8-11/16" (221 mm)
Ø 2-7/16" (62 mm)
Installation
Installation hardware and template included
Installation Notes Install this product according to the installation instructions.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
Buckley™ | K-35932 24" towel bar
Features
24" (610 mm) bar
Coordinates with other products in the Buckley collection
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
Codes/Standards None Applicable
Material
Premium metal construction for durability and reliability
KOHLER finishes resist corrosion and tarnishing
Recommended Products/Accessories
K-23723 Faucet cleaner
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
26-7/16" (672 mm)
24" (610 mm)
Ø 2-7/16" (62 mm)
3-11/16" (94 mm)
Installation
Installation hardware and template included
Installation Notes Install this product according to the installation instructions.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:4 - US-CA
1/2 Inch Thick Cork Board – Natural Tan Cork Sheet
1/2" thick natural cork boards with Adhesive-backed. Dense fine grain extruded cork sheet used for tackable surfaces.
Diverse Cork Sheet Options A 1/2 inch thick cork board offers numerous applications in both home and professional settings. From classic bulletin board designs to creative wall coverings, the versatility of cork sheets is unmatched.
These natural cork boards provide excellent acoustic and thermal insulation, making them an ideal choice for soundproofing projects and even as flooring materials. Moreover, cork's natural properties act as a moisture barrier, promising durability over time.
https://www.bangorcork.com/sample-request https://www.bangorcork.com/sample-request https://www.bangorcork.com/1-2-Inch-tan-cork/newReview https://www.bangorcork.com/CBL-B5124B-24-x-36-x-3_4 https://www.bangorcork.com/CBL-B5124B-24-x-36-x-3_4 https://www.bangorcork.com/48-x-100-x-1-4-Cork-Roll https://www.bangorcork.com/48-x-100-x-1-4-Cork-Roll https://www.bangorcork.com/CBL-BSNU28-1-2x24x36 https://www.bangorcork.com/CBL-BSNU28-1-2x24x36 https://www.bangorcork.com/48-x-1-4-Cork-Roll-Cut-to-Length https://www.bangorcork.com/48-x-1-4-Cork-Roll-Cut-to-Length
MHEU1738X
1.7 cu. ft. Smart Over-the-Range Convection Microwave Oven with Air Fry
K E
Y F
E A
T U
R E
S
1.7 cu.ft. Oven Capacity WideViewTM Widow PrintProofTM Stainless SteelSensor Cooking Air Fry Touchless Lighting Wi-Fi Connect (ThinQ® Technology) ThinQ UP Auto Cook
SUMMARY
Oven Capacity (cu.ft.) 1.7 cu.ft.
Type Over-the-Range Microwave Color PrintProof™ Stainless Steel
FEATURES
Microwave Power Output (W) 950 Convection Power Output (W) 1550
Exterior Design WideView™ Window (One body frame Monitor look)
Control Type Glass Touch (SmoothTouch™) Backlit Control Panel Yes Control Location Bottom Display White LED Scrolling, 2 Lines EasyClean® Interior No (STS)
COOKING FEATURES
Convection Yes Air Fry Yes Air Sous-Vide Yes Defrost Auto/ Time Proof Yes Warm Yes Power Levels for MW 10
Sensor Function Yes (19) Sensor Reheat (6), Sensor Cook (2), Popcorn (1)
Auto Cook
Yes(34) Auto Defrost(5),Steam Cook(7), Soften(4), Melt(4), More Modes (7EA), Warm (1EA), Proof (1EA), Manual Cook(5EA)
Custom Settings Yes
CONVENIENCE FEATURES
Wi-Fi Connect (ThinQ®) Yes ThinQ UP Yes ExtendaVentTM 2.0 No Racks 1 Turntable Diameter (Inches) 13.5" Clock Yes Kitchen Timer Yes Completion Beeper Yes Turntable On/Off Yes Add 30 Second Yes Included Accessories Metal Tray, Steam Bowl, Metal Rack, Tray, Crisp Touchless Light Yes Easyclean Mode Yes
Air Fry Control Panel ThinQ App
© 2025 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 3/6/2026
P R
O D
U C
T F
E A
T U
R E
S
LIGHTING
Lighting (Exterior/ Interior) LED Lighting
SAFETY FEATURES
Child Lock Yes
VENTING SYSTEM
Filtration Charcoal Filter Exhaust Grease Filter 2 Power Levels 4 Vent Grille Type Hidden Vent Air Flow (CFM) 300
MATERIALS AND FINISHES
All Available Colors PrintProofTM Stainless Steel PrintProofTM Finish Yes Interior Color Stainless Steel Handle Type One Body
SMART FEATURES
ThinQ® (Wi-Fi Enabled) Yes ThinQ UP Yes
Voice Control Google Assistant Amazon Alexa
Smart Receipt (3rd Party Recipe App) No
Proactive Customer Care Yes Smart DiagnosisTM Yes
ACCESSORIES
Crispy Tray Yes
POWER/ RATING
Volts 120/ 60 Amps/ Watts 14.5A/ 1700W
DIMENSIONS/ CLEARANCES/ WEIGHT
Cavity (WxHxD) 21 10/16"x 9 12/16"x 14 4/16" Exterior (WxHxD) (without or with handle) 29 14/16"x 16 8/16"x 16 6/16"
Net Weight (lbs) 72.6 Shipping Weight (lbs) 85.8 Shipping Dimensions (WxHxD) 33 7/16x 21 x 19 5/16
LIMITED WARRANTY
Parts and Labor 2 Year
UPC CODE
MHEU1738X 048231349697
MHEU1738X
Smart Over the Range Convection Microwave
HOME APPLIANCES
IM
P
O R
TA
N
T QUICK INSTALL & CLEARANCES
For full installation directions/clearances please refer to the corresponding User Manual and Installation Guide.
DIMENSIONS
Cavity (WxHxD) 21 10/16"x 9 12/16"x 14 4/16"
Exterior (WxHxD) (without or with handle) 29 14/16"x 16 8/16"x 16 6/16"
Net Weight (lbs) 72.6
Shipping Weight (lbs) 85.8
Shipping Dimensions (WxHxD) 33 7/16x 21 x 19 5/16
POWER SOURCE
Volts 120 / 60
Amps / Watts 14.5A /1700W
PRODUCT DIMENSIONS
INSTALLATION
CONNECTIONG THE DRAIN HOSE
© 2025 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 2/20/2026
WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Installation
• This appliance should not be installed by anyone except properly qualified service personnel.
• You will need two people to install this appliance. It is heavy and could cause personal injury if not handled properly.
• Avoid Electric Shock. Before you drill into the wall, note where electrical outlets are and where electrical wires might be concealed behind the wall. You could get an electric shock if you contact electrical wires with your drill bit.
Locate and disconnect the power to any electrical circuits that could be affected by installing this appliance. If you do not disconnect the power, you could get an electric shock.
• This appliance must be grounded.
If there is an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord which includes a grounding wire with a grounding plug.
• Place the plug into a properly installed and grounded outlet
IMPORTANT SAFETY INSTRUCTIONS
Before You Start
Be sure to read the following safety instructions
Read the entire manual before you begin. The model number plate is located on the oven front.
The mounting plate is located on the back side of the microwave oven
Three-pronged (grounding) plug
Properly polarized and grounded outlet
• Do not use an extension cord.
• Keep the power cord dry and do not pinch or crush it.
Failure to follow this instruction may cause a fire hazard.
• Do not, under any circumstances, remove the power supply cord grounding prong.
• If you use the grounding plug improperly, you risk electric shock and/or fire.
Check with a qualified electrician if you are not sure whether the oven is properly grounded or if you do not completely understand the grounding instructions.
• Do not use a fuse in the neutral or grounding circuit.
• Improper grounding could result in electric shock, fire or other personal injury.
16 6/18"
16 6/16"29 14/16"
Be sure you have enough space (minimum vertical and horizontal clearance).
Maximum 13": cabinet depth
Minimum 30": cabinet opening width
Minimum 30": clearance from bottom of cabinet to cooking surface or countertop before installation. (Use templates included with installation instructions.)
Grounded Outlet (inside upper cabinet)
Power Supply Cord Hole
TORNADO FLUSH CEFIONTECT
FEATURES
| • | TORNADO FLUSH® system, (1.6 GPF/6.0 LPF) |
| • | CEFIONTECT® ceramic glaze minimizes waste from |
sticking to porous, ceramic surfaces
| • | Elongated front bowl and seat |
| • | Chrome plated trip lever |
| • | 12" Rough-in, supply line sold separately |
MODELS
• MS776124CSG (#01)
With CEFIONTECT ceramic glaze & includes SS124 SoftClose® seat
COMPONENTS
• C776CEGT40
Elongated bowl with CEFIONTECT
• ST776SA
Tank and cover only
• SS124
SoftClose seat
OPTIONAL COMPONENTS
• THU808(#01, #03, #11, #12, #51, #PN, #BN, #RB)-A
Trip Lever - Cotton, Bone, Colonial White, Sedona Beige, Ebony, Polished Nickel, Brushed Nickel, Oil Rubbed Bronze)
PRODUCT SPECIFICATION
The two-piece high-efficiency Tornado Flush system toilet shall be 1.6 GPF/6.0 LPF. Toilet shall have CEFIONTECT ceramic glaze and be at Regular Height.
Toilet shall have high-profile tank, elongated front bowl, SoftClose seat and Chrome trip lever. Toilet shall be TOTO Model MS776124CSG#01.
COLORS/FINISHES
• #01 Cotton
MS776124CSG
Drake® Two-Piece Toilet, 1.6 GPF
CODES/STANDARDS
| • | Meets and exceeds ASME A112.19.2/CSA B45.1 |
| • | Certifications: IAPMO(cUPC®) |
| • | Code Compliance: UPC, IPC, NSPC, NPC Canada, |
and others
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
SPECIFICATIONS
DIMENSIONS
# SS-01992 v.02
MS776124CSG
Drake® Two-Piece Toilet, 1.6 GPF
Shipping Dimensions
C776CEGT40
29-3/4" L x 15" W1 x 10-5/8" W2 x 16-1/4" H
ST776SA
18-3/4" L x 8-7/8" W x 16-1/4" H
Shipping Weight
C776CEGT40
57 lbs.
ST776SA
32 lbs.
Material Vitreous China
Warranty One Year Limited Warranty
Trap Seal 2-1/8"
Rough-in 12"
Trap Diameter 2-1/8"
Water Surface 9" x 6-7/8"
Min. Water Pressure 8 psi (Flowing)
Flush System TORNADO FLUSH®
Water Use 1.6 GPF (6.0 LPF)
17 3/16" [436 mm]
CST776C(S)(E)G w/ SS124
29" [736 mm]
16 1/8" [410 mm]
1 5/8" [40 mm] Finished
Floor Finished Wall
* Suggested Dimension
Finished Wall
Supply as Req'd
5 1/2" [140 mm]
13/16" [20 mm]
7 3/8" [187 mm]
18 1/2" [470 mm]
Water Level 5 1/2"
[140 mm]
* 4 5/16" [109 mm]
24 7/16" [620 mm]
12" [305 mm]
9 13/16" [250 mm]
6" [152 mm]
* 7 1/2" [190 mm]
14 15/16" [380 mm]
5 1/2" [140 mm]
14 1/16" [357 mm]
18 11/16" [474 mm]
11 13/16" [300 mm]
7 7/8" [200 mm]
1 1/16" [28 mm]
1 7/16" [37 mm] 1 7/8"
[47 mm]
SEAT HEIGHT
16 3/8"
[417 mm]
2 3/8" [60 mm]
28 5/16" [720 mm]
14" [355 mm]
3/16" [4 mm]
Ø1 15/16" [Ø50 mm]
4 5/8" [117 mm]
Double Sanitary Tee / Sanitary CrossDouble Combination Wye / 1/8 Bend
YES NO
Important Note:
Back-to-Back Toilet Installations:
TOTO USA, Inc. recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
INSTALLATION NOTES
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes.
To maintain adequate wall gap between the back of the tank and wall, mount the floor flange at a nominal 12” rough-in distance.
Buckley™ | K-TS35937-4H Rite-Temp® bath and shower trim kit, 1.5 gpm
Features
Single-function 1.5 gpm (5.7 lpm) showerhead
A single handle controls both on/off activation and temperature setting
MasterClean™ sprayface features an easy-to-clean surface that withstands mineral buildup and maximizes spray performance
5-1/16" (129 mm) diverter bath spout with slip-fit connection
Box includes: Showerhead, shower arm and flange, faceplate with lever handle, diverter bath spout with 1/2" slip-fit connection
This product can help a building earn Water Efficiency points in LEED® Green Building Rating System
Coordinates with other products in the Buckley collection
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992 EPA WaterSense® California Energy Commission (CEC)
Technical Information All product dimensions are nominal.
Handle Handle Style/ Type: Lever
Spout Spout Reach: 5-1/16" (128 mm)
Flow Rate Shower/Rainhead Rated Maximum Flow:
1.5 gpm (5.7 l/min)
Handshower Rated Maximum Flow:
1.5 gpm (5.7 l/min)
Valves
Required Valve: Pressure Balance
Material
Premium material construction with metal handle ensures reliability and durability
KOHLER finishes resist corrosion and tarnishing
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
3-3/16" (81 mm)
1/2 -14 NPT
Ø 2-9/16" (65 mm)
6-1/2" (165 mm) Typical
2-11/16" (68 mm)
Ø 1-1/4" (32 mm) Max
5-1/16" (129 mm)
Slip-fit:
Extend 5/8" OD tube 2-3/4" (70 mm) from finished wall.
Ø 6-1/2" (165 mm)
3-7/8" (98 mm)
4-9/16" (116 mm)
K-8300 Valve Series
K-2971-KS,
K-304 Valves
Finished Wall
*If 3-1/2" (89 mm) to 4-1/4" (108 mm) use deep roughing-in kit.
Installation
Trim only; requires valve to complete installation (sold separately)
Installation Notes Install this product according to the installation instructions.
Install the product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for installing trim, can damage the K-2971-KS valve. Consult the trim installation guide to verify if the thin wall installation kit (88526) is needed.
Install straight pipe or tube drop of 7" (178 mm) to 18" (457 mm) with single elbow between the valve and the wall-mount spout.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Buckley™ | K-TS35938-4H Rite-Temp® shower trim kit, 1.5 gpm
Features
Single-function 1.5 gpm (5.7 lpm) showerhead
A single handle controls both on/off activation and temperature setting
MasterClean™ sprayface features an easy-to-clean surface that withstands mineral buildup and maximizes spray performance
Box includes: Showerhead, shower arm and flange, faceplate with lever handle
Coordinates with other products in the Buckley collection
This product can help a building earn Water Efficiency points in LEED® Green Building Rating System
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-28-2026 18:2 - US-CA
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992 EPA WaterSense® California Energy Commission (CEC)
Technical Information All product dimensions are nominal.
Handle Handle Style/ Type: Lever
Flow Rate Shower/Rainhead Rated Maximum Flow:
1.5 gpm (5.7 l/min)
Handshower Rated Maximum Flow:
1.5 gpm (5.7 l/min)
Valves
Required Valve: Pressure Balance
Material
Premium material construction with metal handle ensures reliability and durability
KOHLER finishes resist corrosion and tarnishing
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-28-2026 18:2 - US-CA
3-3/16" (81 mm)
1/2 -14 NPT
Ø 2-9/16" (65 mm)
6-1/2" (165 mm)
Ø 6-1/2" (165 mm)
3-7/8" (98 mm)
4-9/16" (116 mm)
K-8300 Valve Series
K-2971-KS,
K-304 Valves
Finished Wall
*If 3-1/2" (89 mm) to 4-1/4" (108 mm) use deep roughing-in kit.
Installation
Trim only; requires valve to complete installation (sold separately)
Installation Notes Install this product according to the installation instructions.
Install the product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for installing trim, can damage the K-2971-KS valve. Consult the trim installation guide to verify if the thin wall installation kit (88526) is needed.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-28-2026 18:2 - US-CA
Avec® | K-25832-LA 60" x 36" alcove bath, left drain
Features
Slotted overflow allows for deep soaking
13-1/4" (337 mm) deep-soaking depth provides a relaxing bathing experience
Integral lumbar support and neck rest offer extra comfort while bathing
Low step-over height allows easy entry and exit
Integral overflow reduces installation time
Integral apron creates a clean, finished look
Textured bottom surface
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 19:40 - US-CA
Codes/Standards ADA compliant when installed to the specific requirements of these regulations.
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
ADA
ICC/ANSI A117.1
Technical Information All product dimensions are nominal.
Drain Location: Left
Drain Hole Diameter: 2-1/4" (57 mm)
Minimum Flat for Door: 2-15/16" (75 mm)
Basin Area, Bottom: 43-1/2" x 24-7/8" (1105 mm x 632 mm)
Basin Area, Top: 55-15/16" x 29-1/2" (1421 mm x 749 mm)
Water Depth: 13-1/4" (337 mm)
Water Capacity: 65.4 gal (247.6 L)
Minimum Floor Load: 43.4 lbs/ft²
Weight: 106.24 lbs (48.2 kg)
Material
Acrylic
Warranty See website for detailed warranty information.
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 19:40 - US-CA
1-1/2" Bath Drain
36" (914 mm)
1-1/4" (32 mm)
Drop-in Rim Detail
19-3/8" (492 mm)
No change in measurements if connected with drain illustrated. (1475082)
19-3/8" (492 mm)
Lumbar Angle 35°
1-1/4" (32 mm)
1-3/8" (35 mm)
2" (51 mm)
15-7/16" (392 mm)
3-3/4" (95 mm) 60" (1524 mm)
10-9/16" (268 mm)
Installation
Alcove
Left drain
Installation Notes Install this product according to the installation instructions.
Measure your actual product for rough-in details.
The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
ADA compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 19:40 - US-CA
Caxton® | K-2209 17" oval undermount bathroom sink
Features
Oval basin with unglazed underside
Overflow drain
No faucet holes; requires wall- or counter-mount faucet
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
0 White HW1 Honed White 96 Biscuit 7 Black Black HDN Honed Dune HB1 Honed Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 3:8 - US-CA
Codes/Standards ADA, CSA B651 compliant when installed to the specific requirements of these regulations.
ASME A112.19.2/CSA B45.1
ADA
ICC/ANSI A117.1
CSA B651
Technical Information With Overflow: Yes
Drain Hole Diameter: 1-3/4" (44 mm)
Basin Configuration: Single Bowl
Basin Length: 15-1/4" (387 mm)
Basin Width: 12-1/4" (311 mm)
Basin Depth: 5-3/4" (146 mm)
Material
Vitreous china
Recommended Products/Accessories
K-23726 Drain treatment
K-8998 Adjustable P-trap with tubing outlet, 1-1/4" x 1-1/4"
K-23725 Cast iron cleaner
Warranty See website for detailed warranty information.
KOHLER® Vitreous China Bathroom Sink Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 3:8 - US-CA
17-1/16" (433 mm)
8-9/16" (217 mm)
10-3/4" (273 mm)
3-1/4" (83 mm)
7/8" (22 mm)
13-7/8" (352 mm)
7-5/8" (194 mm)14"
(356 mm) 13-1/8" (333 mm)
1-1/4" OD
3/8" Hot 3/8" Cold 1-1/2" (38 mm)
4" (102 mm)
ADA Drain Outlet of FittingLC
5-1/8" (130 mm)
1/2" (13 mm)
3/8" (10 mm)
5/8" (16 mm)
34" (864 mm) 27"
(686 mm) Min
8" (203 mm)Min
24" (610 mm)2-3/8" (60 mm)
11" (279 mm) 9" (229 mm) Min
Recommended ADA Installtion
Marble Installation
Wood Installation
Sealant
Sealant
Installation
Undermount
Installation Notes Install this product according to the installation instructions.
NOTICE: Countertop manufacturer or cutter must use the current product template available at www.kohler.com, or by calling 1-800- 4KOHLER. Kohler Co. is not responsible for cutout errors when the incorrect cutout template is used.
Product dimensions are nominal and may vary per ASME A112.19.2 tolerances.
ADA, CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 3:8 - US-CA
Buckley™ | K-35953-4 Widespread bathroom sink faucet, 1.2 gpm
Features
Two Lever handles control both on/off activation and temperature setting
1.2 gpm (4.5 lpm) maximum flow rate at 60 psi (4.14 bar)
KOHLER® ceramic disc valves exceed industry longevity standards for a lifetime of durable performance
Metal touch-activated drain with 1-1/4" tailpiece
This product can help a building earn Water Efficiency points in LEED® Green Building Rating System
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome BN Vibrant Brushed Nickel BL Matte Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Codes/Standards ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61
DOE - Energy Policy Act 1992 EPA WaterSense® California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
OBC
Technical Information All product dimensions are nominal.
Handle Handle Style/ Type: Lever
Spout Spout Reach: 5" (127 mm)
Drain With Overflow: Yes
Flow Rate Faucet Flow Rate: 1.2 gpm (4.5 l/min)
Valves
Included Valve: Ceramic disc
Material
Premium metal construction for durability and reliability
Recommended Products/Accessories
K-23726 Drain treatment
K-23723 Faucet cleaner
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
4-13/16" (122 mm)
Ø 2-1/8" (54 mm)
8-1/2" (216 mm)
1-1/4" OD
7-3/16" (183 mm)
5" (127 mm)
3" (76 mm)
3-9/16" (90 mm)2-3/4"
(70 mm)
Ø 1-1/8" (29 mm)
3" (76 mm)
Ø 2" (51 mm)
1-1/4" (32 mm) Max
1/2-14NPSM-2A
Ø 1-1/4" (32 mm)
Ø 2-1/8" (54 mm)
8" (203 mm) Min 16" (406 mm) Max
Installation
For 8" – 16" (203 – 406 mm) centers
Preattached flexible supply lines simplify installation
Installation Notes Install this product according to the installation instructions.
ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 19:1 - US-CA
Vault™ | K-3821 32" undermount single-bowl large kitchen sink
Features
36" minimum base cabinet width
Single bowl
9" (229 mm) depth provides generous workspace
Rear drain placement increases cabinet storage space underneath sink
Includes installation hardware
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
NA Stainless Steel
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 21:10 - US-CA
Codes/Standards
ASME A112.19.3/CSA B45.4
Technical Information All product dimensions are nominal.
Drain Hole Diameter: 3-3/4" (94 mm)
Minimum Base Cabinet Width: 36" (914 mm)
Basin Configuration: Single Bowl
Basin Length: 30-1/4" (768 mm)
Basin Width: 16-9/16" (420 mm)
Basin Depth: 9" (229 mm)
Material
Premium 18-gauge stainless steel
Recommended Products/Accessories
K-23726 Drain treatment
K-23729 Stainless steel cleaner
K-8801 Sink drain and strainer with tailpiece
K-8799 Sink drain and strainer basket, less tailpiece
K-6429 Utility rack
K-6644 Stainless steel sink rack
K-6667 Wood cutting board
K-11352 Disposal flange with stopper
Warranty See website for detailed warranty information.
KOHLER® Stainless Steel Sinks Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 21:10 - US-CA
16" (406 mm)
6-5/16" (160 mm)
32" (813 mm) 18-5/16" (465 mm)
9-1/4" (235 mm)
7/8" (22 mm)
Installation
Undermount
Installation Notes Install this product according to the installation instructions.
Allow 3/4" (19 mm) clearance beyond the back of the bowl for the wood cutting board (optional accessory).
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-30-2026 21:10 - US-CA
Simplice® | K-596 Pull-down kitchen sink faucet with three-function sprayhead
Features
Three-function pull-down sprayhead with touch-control allows you to switch between stream, Sweep® spray and Boost technology
Sweep® spray creates a wide, forceful blade of water for superior cleaning
Boost technology increases the flow rate by 30% with the press of a button
KOHLER® ceramic disc valves exceed industry longevity standards for a lifetime of durable performance
ProMotion® technology's light, quiet braided hose and swiveling ball joint make the pull-down sprayhead easier and more comfortable to use
MasterClean™ sprayface features an easy-to-clean surface that withstands mineral buildup and maximizes spray performance
High-arch spout offers superior clearance for filling pots and cleaning
Single handle is simple to use and makes adjusting water temperature easy
Temperature memory allows faucet to be turned on and off at the temperature set during prior usage
1.5 gpm (5.7 lpm) maximum flow rate at 60 psi (4.14 bar)
DockNetik® secure docking system locks sprayhead into place when not in use
Sustainability
Available Colors/Finishes Color tiles intended for reference only.
CP Polished Chrome VS Vibrant Stainless BL Matte Black 2MB Vibrant Brushed Moderne Brass
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 21:22 - US-CA
Codes/Standards ADA, CSA B651 compliant when installed to the specific requirements of these regulations.
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61
DOE - Energy Policy Act 1992 California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
Technical Information All product dimensions are nominal.
Handle Handle Style/ Type: Lever
Spout Spout Reach: 9" (229 mm)
Flow Rate Faucet Flow Rate: 1.5 gpm (5.7 l/min)
Valves
Included Valves: Ceramic disc, Thermostatic, Volume Control
Material
Premium metal construction for durability and reliability
KOHLER finishes resist corrosion and tarnishing
Recommended Products/Accessories
K-23723 Faucet cleaner
K-77687 Single replacement filter cartridge
K-77688 Two-pack replacement filter cartridges
K-77685 Single-cartridge water filtration system
K-77686 Double-cartridge water filtration system
Warranty See website for detailed warranty information.
KOHLER® Faucet Lifetime Limited Warranty
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 21:22 - US-CA
Escutcheon Width Ø 2" (51 mm) for single hole Ø 2-1/2" (64 mm) for three hole
16-5/8" (422 mm)
9-5/8" (244 mm)
9" (229 mm)
31-1/4" (794 mm)
Supply Hoses with 3/8" Compression Fitting
2-1/2" (64 mm) Max
Ø 1-5/16"
6-1/4" (159 mm)
3-15/16" (100 mm)
Ø 2" (51 mm)
10-1/2" (267 mm)
2-1/4" (57 mm)
Installation
For single-hole or three-hole installation (escutcheon plate included)
Flexible supply lines and installation ring simplify installation
Installation Notes Install this product according to the installation instructions.
ADA compliant for faucet handles only.
ADA compliant for faucet handles only ADA, CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current specification sheet, go to www.kohler.com USA or www.kohler.ca Canada.
5-12-2026 21:22 - US-CA
Specification Submittal Data / Panasonic Precision Spot Ventilation Fan with Dual Sensor Technology
FV-0511VQC1
FV-0511VQC1
7-3/8
10-1/4 10-1/4
13 13
4" or 6" duct
VF17563SS0917
Description Ventilating fan shall be low noise ceiling mount type rated for continuous operation. Fan shall be ENERGY STAR® rated and certified by the Home Ventilating Institute (HVI). Evaluated by the Underwriters Laboratories and conform to both UL and cUL standards.
Motor/Blower:
• Enclosed brushless ECM motor technology rated for continuous run.
• Fan ventilation rates shall be manually adjustable for 50-80-110 CFM.
• Power rating shall be 120 volts and 60 Hz.
• Fan shall be UL and cUL listed for tub/shower enclosure when GFCI protected.
• Motor equipped with thermal–cutoff fuse.
• Removable with permanently lubricated plug-in motor.
Housing:
• 26 gauge Zinc-Aluminum-Magnesium (ZAM) housing.
• Integrated dual 4” or 6” diameter duct adapter.
• Built-in damper reduces back drafting and helps with blower door testing.
• Built-in metal flange provides blocking for penetrations through drywall as an Air Barrier, and assists with the decrease in leakage in the Building Envelope during blower door testing.
• Articulating and expandable installation bracket up to 24".
Ceiling Radiation Damper:
• WhisperSense DC is UL listed for use with the
Panasonic Ceiling Radiation Damper (Model #:
PC-RD05C5, sold separately).
Grille:
• Attractive design using Poly Pro material.
• Attaches directly to…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .