Attch 10 APP I AIRCRAFT PANEL RACKS 0215.pdf

APPENDIX I

FOR

AIRCRAFT PANEL PARTS RACKS

AT

TRUAX FIELD, WISCONSIN

BUILDING 400

CSN: NWS912

DATE: 15 FEBRUARY 2023

PREPARED BY:

_Andrew J Huser_

ANDREW J HUSER

PROJECT ENGINEER

AFLCMC/EZPAE

_Brad Thompson___

BRAD THOMPSON

REVIEWER

AFLCMC/EZPAE

CSN: NWS912 Attachment 10 1

THIS PAGE LEFT BLANK INTENTIONALLY

CSN: NWS912 Attachment 10 2

TRUAX FIELD – APP I - Page i

TABLE OF CONTENTS

1. SCOPE

2. REQUIREMENTS

2.1. SYSTEM DEFINITION

2.2. CHARACTERISTICS

2.2.1. RACK DIMENSIONS

2.2.2. PANEL PARTS RACK DESIGN

3. QUALITY ASSURANCE PROVISIONS

3.1. INSPECTIONS

3.2. TEST

CSN: NWS912 Attachment 10 3

TRUAX FIELD – APP I - Page 1

1. SCOPE

This appendix establishes the minimum performance, design, fabrication, delivery, and assembly for two (2) Aircraft Panel

Parts Racks, for Building 400, at Truax Field Wisconsin. The work shall be completed in accordance with this appendix, the Cover

Purchase Description (PD), and Figure 1 of this PD. This appendix covers all equipment, materials, and labor necessary to complete installation of the system.

2. REQUIREMENTS

2.1. SYSTEM DEFINITION

The two (2) aircraft panel parts rack shall be used to store and stage aircraft parts and components while awaiting assembly back onto the aircraft. The aircraft panel parts racks shall be Spika

Mfg. (www.spikamfg.com), SWM-Cowling Rack CWL62X120X86, or

Government approved equivalent. The aircraft panel parts racks shall provide safe separation of parts and be equipped with casters for movement within the maintenance hangar bay.

2.2. CHARACTERISTICS

2.2.1. RACK DIMENSIONS

Racks shall be nominal 120” long x 62” deep x 86” high.

2.2.2. PANEL PARTS RACK DESIGN

The aircraft panel parts racks shall be constructed of lightweight, corrosion resistant aluminum or powder coated steel. Plywood shelves shall be ¾” thick and covered in carpet or equivalent to protect the parts placed on and removed from the storage levels.

Each shelf shall have a minimum capacity of 225 pounds. Upright framing members shall also be protected by carpet, foam or equivalent to protect the parts. A relocatable partition shall be provided in a bay as shown in Figure 1. The panel parts racks shall be equipped with casters for smooth movement within the maintenance hangar. All four casters shall swivel and be provided with an anti-movement lock.

CSN: NWS912 Attachment 10 4

TRUAX FIELD – APP I - Page 2

120"

86"

62"

RELOCATABLE PARTITION

CASTERS

FIGURE 1

CSN: NWS912 Attachment 10 5

TRUAX FIELD – APP I - Page 3

3. QUALITY ASSURANCE PROVISIONS

3.1. INSPECTIONS

The system shall be inspected to verify that it meets all the requirements of sections 1 and 2 of this Purchase Description.

These inspections shall be completed as part of the system checkout test and again as a part of the quality conformance test.

3.2. TEST

The following tests shall be performed on the system as part of the system checkout test and again as a part of the quality conformance test.

No. Description

1. A variety of parts shall be placed onto and removed from the panel parts racks. If the parts are susceptible to damage, the racks shall fail the test.

Shelf shall be loaded with a 225 pound object to test capability and measure any deflection.

2. Capabilities of the relocatable divider shall be demonstrated and locked into place in a minimum of three locations within the bay.

3 The panel parts racks shall be loaded and moved to test ease and ability of the casters. If the panel parts racks do not move freely in all direction, the racks shall fail the test.

CSN: NWS912 Attachment 10 6

TECHNICAL PROPOSAL QUESTIONNAIRE

FOR

TRUAX FIELD – APP I - TPQ Page 1 of 2

AIRCRAFT PANEL PARTS RACKS

Solicitation Number:

FA8604-

-R-

Project Title: Storage Aids System

Base: Truax Field WI CSN: NWS912

Appendix I, Aircraft Panel Parts Rack, 15 FEBRUARY 2023

This questionnaire shall be completed by the Offeror. The questionnaire will be used to determine the Offeror's understanding of the requirements and acceptability of the proposed equipment. Please attach product literature/cut sheets for all equipment detailed in this questionnaire and attach any exceptions to the Purchase Description Appendix.

Characteristics

Number of Aircraft panel parts racks provided: _____

Manufacturer: _____________________

Panel Parts Rack Construction: _____________________

Panel Parts Rack dimensions:

Width: _________ inches

Depth: _________ inches

Height: _________ inches

Number of levels: __________

Total Number of shelves per unit: _________________

Is relocatable divider provided? YES NO

Are casters provided as specified? YES NO

What protective material is provided on Plywood?

CSN: NWS912 Attachment 10 7

Solicitation Number: FA8604- -R-

TRUAX FIELD – APP I - TPQ Page 2 of 2

EXCEPTIONS

Please outline each exception taken to the Purchase

Description Appendix in detail. All exceptions will be reviewed to determine acceptability.

Are exceptions taken? YES NO

EXCEPTIONS:

CSN: NWS912 Attachment 10 8