AEXQ4099_317_GC__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

317 GC

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Working Ranges

Blade Working Ranges

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb):

With Blade Up

Without Blade

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb):

With Blade Up

Without Blade

Bucket Specifications and Compatibility

Attachments Offering Guide

Standard and Optional Equipment Dealer Installed Kits and Attachments 317 GC Environmental Declaration

Engine

Engine Model Cat® C3.6

Net Power

ISO 9249 89 kW 119 hp

ISO 9249 (DIN) 121 hp (metric)

Engine Power

ISO 14396 90 kW 121 hp

ISO 14396 (DIN) 122 hp (metric)

Bore 98 mm 4 in

Stroke 120 mm 5 in

Displacement 3.6 L 220 in3

Biodiesel Capability Up to B20(1)

time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

20% biodiesel FAME (fatty acid methyl ester)* �100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 8.7 rpm

Maximum Swing Torque 61 kN·m 44,990 lbf·ft

Weights

Operating Weight 17 200 kg 38,000 lb

• Long undercarriage, Reach boom, R3.1 (10'2") stick, General Duty (GD) 0.76 m3 (0.99 yd3) bucket, 600 mm (24") triple grouser shoes and 3.05 mt (6,720 lb) counterweight.

Track

Standard Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 700 mm 28 in

Number of Shoes (each side) 44

Number of Track Rollers (each side) 7

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.3 km/h 3.3 mph

Maximum Drawbar Pull – Long Undercarriage

157 kN 35,295 lbf

Hydraulic System

Main System – Maximum Flow – Implement

296 L/min 78 gal/min

Maximum Pressure – Equipment 35 000 kPa 5,075 psi

Maximum Pressure – Travel 35 000 kPa 5,075 psi

Maximum Pressure – Swing 25 800 kPa 3,741 psi

Boom Cylinder – Bore 110 mm 4.3 in

Boom Cylinder – Stroke 1193 mm 47.0 in

Stick Cylinder – Bore 120 mm 4.7 in

Stick Cylinder – Stroke 1331 mm 52.4 in

Bucket Cylinder – Bore 105 mm 4.1 in

Bucket Cylinder – Stroke 1039 mm 40.9 in

Service Refill Capacities

Fuel Tank Capacity 271 L 71.6 gal

Cooling System 22 L 5.8 gal

Engine Oil 11 L 2.9 gal

Final Drive (each) 6 L 1.6 gal

Hydraulic System (including tank) 94 L 24.8 gal

Hydraulic Tank 87 L 23.0 gal

Diesel Exhaust Fluid (DEF) Tank 22 L 5.9 gal

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab/Operator Protective Guards (OPG) (optional)

ISO 10262:1998 (Level II)

Sound Performance

ISO 6395:2008 external 101 dB(A)

ISO 6396:2008 internal 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

317 GC Hydraulic Excavator Specifications

Operating Weights and Ground Pressures

Base Machine Configurations

600 mm (24") Triple Grouser Shoes

600 mm (24") Rubber Track Shoes

700 mm (28") Triple Grouser Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base machine with 3.05 mt (6,720 lb) Counterweight and Long Undercarriage Reach Boom + R2.6 (8'6") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 200 (37,800)

40.6 (5.9)

17 500 (38,600)

41.5 (6.0)

17 400 (38,300)

35.3 (5.1)

Reach Boom + R2.9 m (9'6") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 200 (38,000)

40.8 (5.9)

17 600 (38,800)

41.7 (6.0)

17 500 (38,500)

35.4 (5.1)

Reach Boom + R3.1 m (10'2") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 200 (38,000)

40.8 (5.9)

17 600 (38,800)

41.7 (6.0)

17 500 (38,500)

35.4 (5.1)

Reach Boom + R2.6 m (8'6") Stick + 0.76 m3 (0.99 yd3) + GD Bucket + Blade

18 000 (39,800)

42.7 (6.2)

18 400 (40,600)

43.6 (6.3)

18 300 (40,300)

37.1 (5.4)

Reach Boom + R3.1 m (10'2") Stick + 0.76 m3 (0.99 yd3) + GD Bucket + Blade

18 100 (39,900)

42.9 (6.2)

18 500 (40,800)

43.8 (6.4)

18 400 (40,500)

37.3 (5.4)

Base machine with 3.57 mt (7,870 lb) Counterweight and Long Undercarriage Reach Boom + R2.6 (8'6") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 700 (39,000)

41.8 (6.1)

18 000 (39,800)

42.7 (6.2)

17 900 (39,500)

36.3 (5.3)

Reach Boom + R2.9 m (9'6") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 700 (39,100)

42.0 (6.1)

18 100 (39,900)

42.9 (6.2)

18 000 (39,600)

36.5 (5.3)

Reach Boom + R2.9 m (9'6") Thumb Ready Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 800 (39,300)

42.2 (6.1)

18 200 (40,200)

43.1 (6.3)

18 100 (39,900)

36.7 (5.3)

Reach Boom + R3.1 m (10'2") Stick + 0.76 m3 (0.99 yd3) GD Bucket

17 700 (39,100)

42.0 (6.1)

18 100 (39,900)

42.9 (6.2)

18 000 (39,700)

36.5 (5.3)

Reach Boom + R2.9 m (9'6") Thumb Ready Stick + 0.76 m3 (0.99 yd3) + GD Bucket + Blade

18 700 (41,300)

44.4 (6.4)

19 100 (42,100)

45.3 (6.6)

19 000 (41,900)

38.5 (5.6)

Reach Boom + R3.1 m (10'2") Stick + 0.76 m3 (0.99 yd3) + GD Bucket + Blade

18 600 (41,100)

44.1 (6.4)

19 000 (41,900)

45.0 (6.5)

18 900 (41,600)

38.3 (5.6)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine (with counterweight, upper frame [including swing frame], long undercarriage – does not include boom, stick, bucket, boom cylinders, stick cylinder, bucket cylinders, tracks, 90% fuel tank and 75 kg [165 lb] operator).

With 3.05 mt (6,720 lb) Counterweight 11 430 25,200

With 3.57 mt (7,870 lb) Counterweight 11 950 26,350

Track Shoes:

600 mm (24") Triple Grouser Track Shoes 2340 5,160

600 mm (24") Rubber Track Shoes 2710 5,980

700 mm (28") Triple Grouser Track Shoes with Additional Steps 2580 5,680

Two Boom Cylinders 300 670

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 300 660

Counterweights:

3.05 mt (6,720 lb) Counterweight 3050 6,720

3.57 mt (7,870 lb) Counterweight 3570 7,870

Swing Frame 1690 3,720

Undercarriage:

Base Frame with Long Undercarriage 3900 8,600

Boom (including lines, pins, stick cylinder):

Reach Boom 5.1 m (16'9") 1320 2,910

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R2.6 (8'6") 810 1,780

Reach Stick R2.9 m (9'6") 880 1,930

Thumb Ready Stick R2.9 m (9'6") 980 2,160

Reach Stick R3.1 m (10'2") 880 1,940

Buckets (without linkage):

0.62 m3 (0.81 yd3) GD Bucket 740 1,630

0.76 m3 (0.99 yd3) GD Bucket 640 1,410

0.91 m3 (1.19 yd3) GD Bucket 730 1,600

0.62 m3 (0.81 yd3) Severe Duty (SD) Bucket 680 1,510

0.76 m3 (0.99 yd3) SD Bucket 740 1,630

0.91 m3 (1.19 yd3) SD Bucket 820 1,800

Quick Coupler:

Pin Grabber Quick Coupler 260 580

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Option Reach Boom

5.1 m (16'9")

Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")

1 Machine Height:

Top of Cab Height 2930 mm 9'7" 2930 mm 9'7" 2930 mm 9'7" 2930 mm 9'7"

Top of OPG Height 3070 mm 10'1" 3070 mm 10'1" 3070 mm 10'1" 3070 mm 10'1"

Handrails Height 2940 mm 9'8" 2940 mm 9'8" 2940 mm 9'8" 2940 mm 9'8"

With Boom/Stick/Bucket Installed (with stick cylinder lines)

2980 mm 9'9" 3040 mm 9'11" 3040 mm 9'11" 3120 mm 10'3"

With Boom/Stick Installed (with stick cylinder lines) 2880 mm 9'5" 2920 mm 9'7" 2920 mm 9'7" 2970 mm 9'9"

With Boom Installed (with stick cylinder lines) 2460 mm 8'1" 2460 mm 8'1" 2460 mm 8'1" 2460 mm 8'1"

Machine Height (with 600 mm [24"] Rubber Track Shoes):

Top of Cab Height 2990 mm 9'9" 2990 mm 9'9" 2990 mm 9'9" 2990 mm 9'9"

Top of OPG Height 3130 mm 10'3" 3130 mm 10'3" 3130 mm 10'3" 3130 mm 10'3"

Handrail Height 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10"

With Boom/Stick/Bucket Installed (with stick cylinder lines)

2990 mm 9'9" 3030 mm 9'9" 3030 mm 9'9" 3120 mm 9'9"

With Boom/Stick Installed (with stick cylinder lines) 2890 mm 9'7" 2930 mm 9'9" 2930 mm 9'9" 2980 mm 9'11"

With Boom Installed (with stick cylinder lines) 2490 mm 8'3" 2490 mm 8'3" 2490 mm 8'3" 2490 mm 8'3"

2 Machine Length:

With Boom/Stick/Bucket Installed (with stick cylinder lines)

8560 mm 28'0" 8570 mm 28'1" 8570 mm 28'1" 8580 mm 28'2"

With Boom/Stick Installed (with stick cylinder lines) 8530 mm 27'11" 8550 mm 28'1" 8550 mm 28'1" 8570 mm 28'1"

With Boom Installed (with stick cylinder lines) 7560 mm 24'10" 7560 mm 24'10" 7560 mm 24'10" 7560 mm 24'10"

Machine Length (with Blade, Blade Rear) with boom/stick/bucket installed (with stick cylinder lines)

8590 mm 28'2" 8610 mm 28'3" 8610 mm 28'3" 8620 mm 28'3" with boom/stick installed (with stick cylinder lines) 8570 mm 28'1" 8590 mm 28'2" 8590 mm 28'2" 8610 mm 28'3" with boom installed (with stick cylinder lines) 7600 mm 24'11" 7600 mm 24'11" 7600 mm 24'11" 7600 mm 24'11"

Bucket Type GD GD GD GD

Bucket Capacity 1.00 m3 1.31 yd3 0.76 m3 0.99 yd3 0.76 m3 0.99 yd3 1.00 m3 1.31 yd3

Bucket Tip Radius 1390 mm 4'7" 1390 mm 4'7" 1390 mm 4'7" 1390 mm 4'7"

(continued on next page)

Dimensions (continued) All dimensions are approximate and may vary depending on bucket selection.

Boom Option Reach Boom

5.1 m (16'9")

Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")

3 Upperframe Width 2540 mm 8'4" 2540 mm 8'4" 2540 mm 8'4" 2540 mm 8'4"

4 Tail Swing Radius:

3.05 mt (6,720 lb) Counterweight 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2"

3.57 mt (7,870 lb) Counterweight 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2"

5 Counterweight Clearance 1010 mm 3'4" 1010 mm 3'4" 1010 mm 3'4" 1010 mm 3'4"

6 Ground Clearance 430 mm 1'5" 430 mm 1'5" 430 mm 1'5" 430 mm 1'5"

7 Length to Center of Rollers 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5"

8 Track Length 3970 mm 13'0" 3970 mm 13'0" 3970 mm 13'0" 3970 mm 13'0"

9 Track Gauge 1990 mm 6'6" 1990 mm 6'6" 1990 mm 6'6" 1990 mm 6'6"

10 Undercarriage Width:

600 mm (24") Shoes 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6"

700 mm (28") Shoes (with steps) 2690 mm 8'10" 2690 mm 8'10" 2690 mm 8'10" 2690 mm 8'10"

Bucket Type GD GD GD GD

Bucket Capacity 1.00 m3 1.31 yd3 0.76 m3 0.99 yd3 0.76 m3 0.99 yd3 1.00 m3 1.31 yd3

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

01234567891011 –1 Meters

Meters

R3.1 (10'2")

R2.9 (9'6")

R2.6 (8'6")

05101520253035 Feet

Feet

Boom Option Reach Boom

5.1 m (16'9")

Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")

1 Maximum Digging Depth 6100 mm 20'0" 6400 mm 21'0" 6400 mm 21'0" 6600 mm 21'8"

2 Maximum Reach at Ground Line 8790 mm 28'10" 9010 mm 29'7" 9010 mm 29'7" 9200 mm 30'2"

3 Maximum Cutting Height 8940 mm 29'4" 8900 mm 29'2" 8900 mm 29'2" 8990 mm 29'6"

4 Maximum Loading Height 6270 mm 20'7" 6280 mm 20'7" 6280 mm 20'7" 6370 mm 20'11"

5 Minimum Loading Height 2290 mm 7'6" 1990 mm 6'6" 1990 mm 6'6" 1790 mm 5'10"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom

5880 mm 19'3" 6170 mm 20'3" 6170 mm 20'3" 6380 mm 20'11"

7 Maximum Vertical Wall Digging Depth 4980 mm 16'4" 4960 mm 16'3" 4960 mm 16'3" 5150 mm 16'11"

8 Minimum Working Equipment Radius 2980 mm 9'9" 2940 mm 9'8" 2940 mm 9'8" 2930 mm 9'7"

Bucket Digging Force (ISO) 123 kN 27,650 lbf 123 kN 27,650 lbf 123 kN 27,650 lbf 123 kN 27,650 lbf

Stick Digging Force (ISO) 80 kN 17,980 lbf 75 kN 16,860 lbf 75 kN 16,860 lbf 71 kN 15,960 lbf

Bucket Type GD GD GD GD

Bucket Capacity 1.00 m3 1.31 yd3 0.76 m3 0.99 yd3 0.76 m3 0.99 yd3 1.00 m3 1.31 yd3

Blade Working Ranges All dimensions are approximate and may vary depending on bucket selection.

Blade Options 2600 mm 2700 mm (8'6") (8'10")

1 Blade Height 614 mm 2'0" 614 mm 2'0"

2 Maximum Lowering Depth from Ground 518 mm 1'8" 518 mm 1'8"

3 Maximum Raising Height above Ground 976 mm 3'2" 976 mm 3'2" θ Approach Angle 23.5° 23.5°

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.6 m (8'6") 5.1 m (16'9") 700 mm (28 in) �Triple Grouser Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 3550 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3500 *2850 2750 7020 15'0" lb *10,050 *10,050 *9,450 7,500 *6,200 6,050 22'10"

3000 mm kg *8900 *8900 *5900 5100 *4850 3350 *2900 2450 7450 10'0" lb *18,900 *18,900 *12,700 11,000 *10,500 7,250 *6,300 5,350 24'04"

1500 mm kg *7250 4800 4950 3200 *3500 2350 *3050 2300 7560 5'0" lb *15,600 10,300 10,650 6,950 *6,750 5,100 24'09"

0 mm kg *6200 *6200 7400 4550 4800 3100 *3450 2350 7370 0'0" lb *14,200 *14,200 15,950 9,850 10,350 6,700 *7,600 5,200 24'02"

–1500 mm kg *5650 *5650 *10 050 8250 7350 4500 4750 3050 4000 2600 6850 –5'0" lb *12,650 *12,650 *22,950 17,700 15,750 9,700 10,250 6,600 8,750 5,700 22'04"

–3000 mm kg *9900 *9900 *10 750 8350 7400 4550 4950 3200 5900 –10'0" lb *22,300 *22,300 *23,250 17,950 15,900 9,800 11,000 7,100 19'02"

–4500 mm kg *7750 *7750 *5450 5200 4240 –15'0" lb *16,400 *16,400 *11,900 11,900 13'06"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.6 m (8'6") 5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 3500 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3450 *2850 2700 7020 15'0" lb *10,050 *10,050 *9,450 7,450 *6,200 5,950 22'10"

3000 mm kg *8900 *8900 *5900 5050 *4850 3350 *2900 2400 7450 10'0" lb *18,900 *18,900 *12,700 10,900 *10,500 7,150 *6,300 5,250 24'04"

1500 mm kg *7250 4700 4900 3200 *3500 2300 *3050 2300 7560 5'0" lb *15,600 10,150 10,500 6,850 *6,750 5,000 24'09"

0 mm kg *6200 *6200 7350 4500 4750 3050 *3450 2350 7370 0'0" lb *14,200 *14,200 15,750 9,700 10,200 6,600 *7,600 5,100 24'02"

–1500 mm kg *5650 *5650 *10 050 8150 7250 4450 4700 3000 3950 2550 6850 –5'0" lb *12,650 *12,650 *22,950 17,450 15,550 9,550 10,100 6,500 8,650 5,600 22'04"

–3000 mm kg *9900 *9900 *10 750 8250 7300 4500 4900 3150 5900 –10'0" lb *22,300 *22,300 *23,250 17,750 15,700 9,650 10,850 7,000 19'02"

–4500 mm kg *7750 *7750 *5450 5150 4240 –15'0" lb *16,400 *16,400 *11,900 11,750 13'06"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.6 m (8'6") 5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 3550 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3500 *2850 2750 7020 15'0" lb *10,050 *10,050 *9,450 7,550 *6,200 6,050 22'10"

3000 mm kg *8900 *8900 *5900 5150 *4850 3400 *2900 2450 7450 10'0" lb *18,900 *18,900 *12,700 11,050 *10,500 7,300 *6,300 5,400 24'04"

1500 mm kg *7250 4800 5000 3250 *3500 2350 *3050 2350 7560 5'0" lb *15,600 10,350 10,700 6,950 *6,750 5,100 24'09"

0 mm kg *6200 *6200 7500 4600 4850 3150 *3450 2400 7370 0'0" lb *14,200 *14,200 16,050 9,900 10,450 6,750 *7,600 5,200 24'02"

–1500 mm kg *5650 *5650 *10 050 8300 7400 4550 4800 3100 4000 2600 6850 –5'0" lb *12,650 *12,650 *22,950 17,800 15,900 9,750 10,350 6,650 8,850 5,750 22'04"

–3000 mm kg *9900 *9900 *10 750 8400 7450 4600 5000 3200 5900 –10'0" lb *22,300 *22,300 *23,250 18,050 16,000 9,850 11,100 7,150 19'02"

–4500 mm kg *7750 *7750 *5450 5200 4240 –15'0" lb *16,400 *16,400 *11,900 *11,900 13'06"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.9 m (9'6") 5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

R2.9

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 3600 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3500 *2600 2600 7240 15'0" lb *8,850 7,550 *5,700 *5,700 23'07"

3000 mm kg *8000 *8000 *5550 5150 *4600 3350 *3350 2400 *2700 2300 7660 10'0" lb *17,050 *17,050 *11,950 11,100 *10,000 7,250 *6,200 5,100 *5,850 5,100 25'01"

1500 mm kg *6950 *6950 *6950 4800 4950 3200 3550 2350 *2900 2200 7780 5'0" lb *16,650 *16,650 *14,950 10,300 10,600 6,900 7,600 5,000 *6,300 4,850 25'05"

0 mm kg *6950 *6950 7400 4550 4800 3100 3500 2250 *3250 2250 7590 0'0" lb *15,950 *15,950 15,900 9,800 10,300 6,600 *7,150 4,900 24'10"

–1500 mm kg *5650 *5650 *10 000 8150 7300 4450 4750 3000 3750 2450 7080 –5'0" lb *12,550 *12,550 *22,750 17,450 15,650 9,600 10,150 6,500 8,250 5,350 23'02"

–3000 mm kg *9250 *9250 *11 150 8250 7300 4500 4750 3050 4600 2950 6160 –10'0" lb *20,750 *20,750 *24,050 17,700 15,700 9,650 10,250 6,600 10,200 6,550 20'01"

–4500 mm kg *8550 8550 *5750 4650 *5550 4500 4610 –15'0" lb *18,200 *18,200 *12,200 10,300 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.9 m (9'6") 5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

R2.9

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 3550 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3450 *2600 2550 7240 15'0" lb *8,850 7,450 *5,700 5,650 23'07"

3000 mm kg *8000 *8000 *5550 5100 *4600 3350 *3350 2350 *2700 2300 7660 10'0" lb *17,050 *17,050 *11,950 10,950 *10,000 7,150 *6,200 5,050 *5,850 5,000 25'01"

1500 mm kg *6950 *6950 *6950 4750 4900 3150 3500 2300 *2900 2200 7780 5'0" lb *16,650 *16,650 *14,950 10,200 10,450 6,800 7,500 4,900 *6,300 4,750 25'05"

0 mm kg *6950 6950 7300 4500 4750 3050 3450 2250 *3250 2200 7590 0'0" lb *15,950 *15,950 15,700 9,650 10,150 6,550 *7,150 4,850 24'10"

–1500 mm kg *5650 *5650 *10 000 8050 7200 4400 4650 3000 3700 2400 7080 –5'0" lb *12,550 *12,550 *22,750 17,250 15,450 9,450 10,000 6,400 8,150 5,300 23'02"

–3000 mm kg *9250 *9250 *11 150 8150 7250 4400 4700 3000 4550 2900 6160 –10'0" lb *20,750 *20,750 *24,050 17,450 15,500 9,500 10,100 6,500 10,050 6,450 20'01"

–4500 mm kg *8550 8400 *5750 4600 *5550 4450 4610 –15'0" lb *18,200 18,100 *12,200 10,150 14'09"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.9 m (9'6") 5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

R2.9

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 3600 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3550 *2600 2600 7240 15'0" lb *8,850 7,600 *5,700 *5,700 23'07"

3000 mm kg *8000 *8000 *5550 5150 *4600 3400 *3350 2400 *2700 2350 7660 10'0" lb *17,050 *17,050 *11,950 11,150 *10,000 7,300 *6,200 5,150 *5,850 5,100 25'01"

1500 mm kg *6950 *6950 *6950 4800 5000 3250 3550 2350 *2900 2200 7780 5'0" lb *16,650 *16,650 *14,950 10,350 10,700 6,950 7,650 5,000 *6,300 4,850 25'05"

0 mm kg *6950 *6950 7450 4600 4850 3100 3500 2300 *3250 2250 7590 0'0" lb *15,950 *15,950 16,000 9,850 10,400 6,650 *7,150 4,950 24'10"

–1500 mm kg *5650 *5650 *10 000 8200 7350 4500 4750 3050 3800 2450 7080 –5'0" lb *12,550 *12,550 *22,750 17,550 15,750 9,650 10,250 6,550 8,350 5,400 23'02"

–3000 mm kg *9250 *9250 *11 150 8300 7400 4500 4800 3050 4650 2950 6160 –10'0" lb *20,750 *20,750 *24,050 17,800 15,850 9,700 10,350 6,600 10,250 6,600 20'01"

–4500 mm kg *8550 *8550 *5750 4700 *5550 4550 4610 –15'0" lb *18,200 *18,200 *12,200 10,350 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 3500 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3450 *2550 2550 7240 15'0" lb *8,700 7,400 *5,600 5,600 23'07"

3000 mm kg *7900 *7900 *5450 5100 *4550 3300 *3300 2350 *2650 2250 7660 10'0" lb *16,850 *16,850 *11,750 10,950 *9,850 7,100 *6,100 5,000 *5,750 4,950 25'01"

1500 mm kg *6900 *6900 *6850 4700 4850 3150 3500 2250 *2850 2150 7780 5'0" lb *16,550 *16,550 *14,750 10,150 10,450 6,750 7,450 4,850 *6,200 4,700 25'05"

0 mm kg *6900 *6900 7300 4450 4750 3000 3400 2200 *3200 2200 7590 0'0" lb *15,850 *15,850 15,700 9,600 10,150 6,450 *7,050 4,750 24'10"

–1500 mm kg *5600 *5600 *9950 8000 7200 4350 4650 2950 3700 2350 7080 –5'0" lb *12,500 *12,500 *22,650 17,200 15,450 9,400 10,000 6,350 8,150 5,200 23'02"

–3000 mm kg *9200 *9200 *11 000 8150 7250 4400 4700 3000 4550 2900 6160 –10'0" lb *20,650 *20,650 *23,800 17,450 15,550 9,450 10,100 6,450 10,050 6,400 20'01"

–4500 mm kg *8450 8450 *5650 4600 *5450 4450 4610 –15'0" lb *18,000 *18,000 *12,000 10,100 14'09"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 3500 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3400 *2550 2500 7240 15'0" lb *8,700 7,350 *5,600 5,500 23'07"

3000 mm kg *7900 *7900 *5450 5000 *4550 3250 *3300 2300 *2650 2200 7660 10'0" lb *16,850 *16,850 *11,750 10,800 *9,850 7,000 *6,100 4,900 *5,750 4,900 25'01"

1500 mm kg *6900 *6900 *6850 4650 4800 3100 3450 2250 *2850 2100 7780 5'0" lb *16,550 *16,550 *14,750 10,000 10,350 6,650 7,350 4,800 *6,200 4,650 25'05"

0 mm kg *6900 *6900 7200 4400 4650 2950 3350 2200 *3200 2150 7590 0'0" lb *15,850 *15,850 15,500 9,450 10,000 6,400 *7,050 4,700 24'10"

–1500 mm kg *5600 *5600 *9950 7900 7100 4300 4600 2900 3650 2350 7080 –5'0" lb *12,500 *12,500 *22,650 16,950 15,250 9,250 9,850 6,250 8,000 5,150 23'02"

–3000 mm kg *9200 *9200 *11 000 8050 7150 4350 4650 2950 4450 2850 6160 –10'0" lb *20,650 *20,650 *23,800 17,250 15,350 9,350 9,950 6,350 9,900 6,300 20'01"

–4500 mm kg *8450 8300 *5650 4550 *5450 4400 4610 –15'0" lb *18,000 17,900 *12,000 10,000 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 3550 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3500 *2550 2550 7240 15'0" lb *8,700 7,450 *5,600 *5,600 23'07"

3000 mm kg *7900 *7900 *5450 5100 *4550 3350 *3300 2350 *2650 2250 7660 10'0" lb *16,850 *16,850 *11,750 11,000 *9,850 7,150 *6,100 5,000 *5,750 5,000 25'01"

1500 mm kg *6900 *6900 *6850 4750 4900 3150 3500 2300 *2850 2150 7780 5'0" lb *16,550 *16,550 *14,750 10,200 10,550 6,800 7,500 4,900 *6,200 4,750 25'05"

0 mm kg *6900 *6900 7350 4500 4750 3050 3450 2200 *3200 2200 7590 0'0" lb *15,850 *15,850 15,800 9,650 10,250 6,500 *7,050 4,800 24'10"

–1500 mm kg *5600 *5600 *9950 8050 7250 4400 4700 2950 3700 2400 7080 –5'0" lb *12,500 *12,500 *22,650 17,300 15,550 9,450 10,100 6,400 8,200 5,250 23'02"

–3000 mm kg *9200 *9200 *11 000 8200 7300 4450 4750 3000 4550 2900 6160 –10'0" lb *20,650 *20,650 *23,800 17,550 15,650 9,500 10,200 6,450 10,100 6,450 20'01"

–4500 mm kg *8450 *8450 *5650 4600 *5450 4500 4610 –15'0" lb *18,000 *18,000 *12,000 10,200 14'09"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

3.1 m (10'2")

R3.1

5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2700 *2700 5380 25'0" lb *6,050 *6,050 17'02"

6000 mm kg *3650 3600 *2450 *2450 6670 20'0" lb *7,550 *7,550 *5,400 *5,400 21'07"

4500 mm kg *3900 3550 *2400 *2400 7440 15'0" lb *8,500 7,600 *5,250 *5,250 24'03"

3000 mm kg *7500 *7500 *5300 5200 *4500 3400 *3600 2400 *2450 2250 7850 10'0" lb *15,950 *15,950 *11,450 11,200 *9,700 7,300 *7,100 5,150 *5,400 4,900 25'08"

1500 mm kg *8250 *8250 *6750 4850 4950 3250 3550 2350 *2650 2150 7960 5'0" lb *19,750 18,600 *14,550 10,400 10,650 6,950 7,600 5,000 *5,800 4,700 26'01"

0 mm kg *7150 *7150 7450 4550 4800 3100 3500 2250 *3000 2150 7780 0'0" lb *16,450 *16,450 15,950 9,850 10,300 6,650 7,450 4,850 *6,550 4,750 25'05"

–1500 mm kg *5400 *5400 *9700 8150 7300 4450 4700 3000 *3600 2350 7280 –5'0" lb *12,050 *12,050 *22,100 17,450 15,650 9,600 10,150 6,500 7,950 5,150 23'10"

–3000 mm kg *8700 *8700 *11 400 8200 7300 4450 4750 3050 4350 2800 6400 –10'0" lb *19,450 *19,450 *24,650 17,650 15,700 9,600 10,200 6,550 9,650 6,200 20'10"

–4500 mm kg *9100 8450 *6150 4600 *5450 4100 4920 –15'0" lb *19,350 18,200 *12,950 9,950 *12,000 9,300 15'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

3.1 m (10'2")

R3.1

5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2700 *2700 5380 25'0" lb *6,050 *6,050 17'02"

6000 mm kg *3650 3550 *2450 *2450 6670 20'0" lb *7,550 *7,550 *5,400 *5,400 21'07"

4500 mm kg *3900 3500 *2400 *2400 7440 15'0" lb *8,500 7,500 *5,250 *5,250 24'03"

3000 mm kg *7500 *7500 *5300 5150 *4500 3350 *3600 2400 *2450 2200 7850 10'0" lb *15,950 *15,950 *11,450 11,050 *9,700 7,200 *7,100 5,100 *5,400 4,850 25'08"

1500 mm kg *8250 *8250 *6750 4750 4900 3200 3500 2300 *2650 2100 7960 5'0" lb *19,750 18,350 *14,550 10,250 10,500 6,850 7,500 4,950 *5,800 4,600 26'01"

0 mm kg *7150 *7150 7350 4500 4750 3050 3450 2250 *3000 2150 7780 0'0" lb *16,450 *16,450 15,750 9,700 10,200 6,550 7,350 4,800 *6,550 4,650 25'05"

–1500 mm kg *5400 *5400 *9700 8050 7200 4400 4650 3000 3550 2300 7280 –5'0" lb *12,050 *12,050 *22,100 17,250 15,450 9,450 10,000 6,400 7,850 5,050 23'10"

–3000 mm kg *8700 *8700 *11 400 8100 7200 4400 4700 3000 4300 2750 6400 –10'0" lb *19,450 *19,450 *24,650 17,400 15,500 9,500 10,050 6,450 9,500 6,100 20'10"

–4500 mm kg *9100 8350 *6150 4550 *5450 4050 4920 –15'0" lb *19,350 18,000 *12,950 9,850 *12,000 9,150 15'09"

Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

3.1 m (10'2")

R3.1

5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2700 *2700 5380 25'0" lb *6,050 *6,050 17'02"

6000 mm kg *3650 *3650 *2450 *2450 6670 20'0" lb *7,550 *7,550 *5,400 *5,400 21'07"

4500 mm kg *3900 3550 *2400 *2400 7440 15'0" lb *8,500 7,650 *5,250 *5,250 24'03"

3000 mm kg *7500 *7500 *5300 5200 *4500 3400 *3600 2450 *2450 2250 7850 10'0" lb *15,950 *15,950 *11,450 11,250 *9,700 7,350 *7,100 5,200 *5,400 4,950 25'08"

1500 mm kg *8250 *8250 *6750 4850 5000 3250 3600 2350 *2650 2150 7960 5'0" lb *19,750 18,700 *14,550 10,450 10,750 7,000 7,650 5,050 *5,800 4,700 26'01"

0 mm kg *7150 *7150 7500 4600 4850 3100 3500 2300 *3000 2200 7780 0'0" lb *16,450 *16,450 16,050 9,900 10,400 6,700 7,550 4,900 *6,550 4,750 25'05"

–1500 mm kg *5400 *5400 *9700 8200 7350 4500 4750 3050 *3600 2350 7280 –5'0" lb *12,050 *12,050 *22,100 17,550 15,750 9,650 10,250 6,550 *7,950 5,200 23'10"

–3000 mm kg *8700 *8700 *11 400 8250 7350 4500 4800 3050 4400 2800 6400 –10'0" lb *19,450 *19,450 *24,650 17,750 15,800 9,650 10,300 6,550 9,700 6,250 20'10"

–4500 mm kg *9100 8500 *6150 4650 *5450 4150 4920 –15'0" lb *19,350 18,300 *12,950 10,000 *12,000 9,350 15'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.6 m (8'6") 5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 *3600 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3750 *2850 *2850 7020 15'0" lb *10,050 *10,050 *9,450 8,100 *6,200 *6,200 22'10"

3000 mm kg *8900 *8900 *5900 5500 *4850 3650 *2900 2650 7450 10'0" lb *18,900 *18,900 *12,700 11,800 *10,500 7,800 *6,300 5,800 24'04"

1500 mm kg *7250 5150 5300 3500 *3500 2550 *3050 2500 7560 5'0" lb *15,600 11,100 11,350 7,500 *6,750 5,550 24'09"

0 mm kg *6200 *6200 7950 4950 5150 3350 *3450 2550 7370 0'0" lb *14,200 *14,200 17,050 10,650 11,100 7,250 *7,600 5,650 24'02"

–1500 mm kg *5650 *5650 *10 050 8900 7850 4900 5100 3350 *4200 2800 6850 –5'0" lb *12,650 *12,650 *22,950 19,100 16,850 10,500 11,000 7,150 *9,300 6,200 22'04"

–3000 mm kg *9900 *9900 *10 750 9050 *7450 4950 5300 3450 5900 –10'0" lb *22,300 *22,300 *23,250 19,400 *16,050 10,600 11,800 7,650 19'02"

–4500 mm kg *7750 *7750 *5450 *5450 4240 –15'0" lb *16,400 *16,400 *11,900 *11,900 13'06"

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.6 m (8'6") 5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 *3600 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3700 *2850 *2850 7020 15'0" lb *10,050 *10,050 *9,450 8,000 *6,200 *6,200 22'10"

3000 mm kg *8900 *8900 *5900 5450 *4850 3600 *2900 2600 7450 10'0" lb *18,900 *18,900 *12,700 11,700 *10,500 7,700 *6,300 5,700 24'04"

1500 mm kg *7250 5100 5200 3450 *3500 2500 *3050 2500 7560 5'0" lb *15,600 10,950 11,200 7,400 *6,750 5,450 24'09"

0 mm kg *6200 *6200 7850 4900 5100 3350 *3450 2550 7370 0'0" lb *14,200 *14,200 16,850 10,500 10,950 7,150 *7,600 5,550 24'02"

–1500 mm kg *5650 *5650 *10 050 8800 7750 4800 5050 3300 4200 2800 6850 –5'0" lb *12,650 *12,650 *22,950 18,900 16,650 10,350 10,850 7,050 9,250 6,100 22'04"

–3000 mm kg *9900 *9900 *10 750 8950 *7450 4850 5250 3400 5900 –10'0" lb *22,300 *22,300 *23,250 19,150 *16,050 10,500 11,650 7,600 19'02"

–4500 mm kg *7750 *7750 *5450 *5450 4240 –15'0" lb *16,400 *16,400 *11,900 *11,900 13'06"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.6 m (8'6") 5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

R2.6

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *3350 *3350 4770 25'0" lb *7,700 *7,700 *7,450 *7,450 15'01"

6000 mm kg *3600 *3600 *2950 *2950 6190 20'0" lb *6,650 *6,650 *6,450 *6,450 20'00"

4500 mm kg *4650 *4650 *4300 3800 *2850 *2850 7020 15'0" lb *10,050 *10,050 *9,450 8,100 *6,200 *6,200 22'10"

3000 mm kg *8900 *8900 *5900 5500 *4850 3650 *2900 2650 7450 10'0" lb *18,900 *18,900 *12,700 11,900 *10,500 7,850 *6,300 5,800 24'04"

1500 mm kg *7250 5200 5300 3500 *3500 2550 *3050 2550 7560 5'0" lb *15,600 11,150 11,450 7,550 *6,750 5,550 24'09"

0 mm kg *6200 *6200 8000 5000 5200 3400 *3450 2600 7370 0'0" lb *14,200 *14,200 17,150 10,700 11,150 7,300 *7,600 5,650 24'02"

–1500 mm kg *5650 *5650 *10 050 8950 7900 4900 5150 3350 *4200 2850 6850 –5'0" lb *12,650 *12,650 *22,950 19,200 16,950 10,550 11,050 7,200 *9,300 6,250 22'04"

–3000 mm kg *9900 *9900 *10 750 9100 *7450 4950 5350 3500 5900 –10'0" lb *22,300 *22,300 *23,250 19,500 *16,050 10,650 *11,800 7,700 19'02"

–4500 mm kg *7750 *7750 *5450 *5450 4240 –15'0" lb *16,400 *16,400 *11,900 *11,900 13'06"

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.9 m (9'6")

R2.9

5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 *3650 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3800 *2600 *2600 7240 15'0" lb *8,850 8,100 *5,700 *5,700 23'07"

3000 mm kg *8000 *8000 *5550 5500 *4600 3650 *3350 2600 *2700 2500 7660 10'0" lb *17,050 *17,050 *11,950 11,900 *10,000 7,800 *6,200 5,550 *5,850 5,500 25'01"

1500 mm kg *6950 *6950 *6950 5150 *5250 3450 3800 2550 *2900 2400 7780 5'0" lb *16,650 *16,650 *14,950 11,100 11,350 7,450 *7,950 5,400 *6,300 5,250 25'05"

0 mm kg *6950 *6950 *7850 4900 5150 3350 3750 2450 *3250 2450 7590 0'0" lb *15,950 *15,950 17,000 10,600 11,050 7,200 *7,150 5,350 24'10"

–1500 mm kg *5650 *5650 *10 000 8800 7800 4850 5050 3300 *4000 2650 7080 –5'0" lb *12,550 *12,550 *22,750 18,900 16,750 10,400 10,900 7,050 *8,800 5,850 23'02"

–3000 mm kg *9250 *9250 *11 150 8900 *7600 4850 5100 3300 4900 3200 6160 –10'0" lb *20,750 *20,750 *24,050 19,150 *16,450 10,450 10,950 7,150 10,900 7,100 20'01"

–4500 mm kg *8550 *8550 *5750 5050 *5550 4900 4610 –15'0" lb *18,200 *18,200 *12,200 11,100 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.9 m (9'6")

R2.9

5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 *3650 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3750 *2600 *2600 7240 15'0" lb *8,850 8,000 *5,700 *5,700 23'07"

3000 mm kg *8000 *8000 *5550 5450 *4600 3600 *3350 2550 *2700 2500 7660 10'0" lb *17,050 *17,050 *11,950 11,750 *10,000 7,700 *6,200 5,500 *5,850 5,450 25'01"

1500 mm kg *6950 *6950 *6950 5100 5200 3450 3750 2500 *2900 2350 7780 5'0" lb *16,650 *16,650 *14,950 11,000 11,200 7,350 *7,950 5,350 *6,300 5,200 25'05"

0 mm kg *6950 *6950 7800 4850 5050 3300 3700 2450 *3250 2400 7590 0'0" lb *15,950 *15,950 16,800 10,450 10,900 7,100 *7,150 5,250 24'10"

–1500 mm kg *5650 *5650 *10 000 8700 7700 4750 5000 3250 3950 2600 7080 –5'0" lb *12,550 *12,550 *22,750 18,650 16,550 10,250 10,750 6,950 8,750 5,750 23'02"

–3000 mm kg *9250 *9250 *11 150 8800 *7600 4800 5050 3250 4850 3150 6160 –10'0" lb *20,750 *20,750 *24,050 18,900 *16,450 10,300 10,850 7,050 10,750 7,000 20'01"

–4500 mm kg *8550 *8550 *5750 5000 *5550 4850 4610 –15'0" lb *18,200 *18,200 *12,200 10,950 14'09"

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.9 m (9'6")

R2.9

5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2950 *2950 5100 25'0" lb *6,600 *6,600 16'02"

6000 mm kg *3650 *3650 *2650 *2650 6450 20'0" lb *7,450 *7,450 *5,900 *5,900 20'11"

4500 mm kg *4050 3800 *2600 *2600 7240 15'0" lb *8,850 8,150 *5,700 *5,700 23'07"

3000 mm kg *8000 *8000 *5550 *5550 *4600 3650 *3350 2600 *2700 2500 7660 10'0" lb *17,050 *17,050 *11,950 *11,950 *10,000 7,850 *6,200 5,600 *5,850 5,550 25'01"

1500 mm kg *6950 *6950 *6950 5200 *5250 3500 3800 2550 *2900 2400 7780 5'0" lb *16,650 *16,650 *14,950 11,200 11,400 7,500 *7,950 5,450 *6,300 5,300 25'05"

0 mm kg *6950 *6950 *7850 4950 5150 3350 3750 2500 *3250 2450 7590 0'0" lb *15,950 *15,950 *17,000 10,650 11,100 7,250 *7,150 5,350 24'10"

–1500 mm kg *5650 *5650 *10 000 8850 7850 4850 5100 3300 *4000 2650 7080 –5'0" lb *12,550 *12,550 *22,750 19,000 16,850 10,450 10,950 7,100 *8,800 5,850 23'02"

–3000 mm kg *9250 *9250 *11 150 8950 *7600 4900 5150 3350 4950 3200 6160 –10'0" lb *20,750 *20,750 *24,050 19,250 *16,450 10,500 11,050 7,200 11,000 7,150 20'01"

–4500 mm kg *8550 *8550 *5750 5050 *5550 4900 4610 –15'0" lb *18,200 *18,200 *12,200 11,150 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 *3600 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3700 *2550 *2550 7240 15'0" lb *8,700 8,000 *5,600 *5,600 23'07"

3000 mm kg *7900 *7900 *5450 5450 *4550 3550 *3300 2550 *2650 2450 7660 10'0" lb *16,850 *16,850 *11,750 11,750 *9,850 7,650 *6,100 5,400 *5,750 5,400 25'01"

1500 mm kg *6900 *6900 *6850 5100 *5200 3400 3750 2450 *2850 2350 7780 5'0" lb *16,550 *16,550 *14,750 10,950 11,200 7,300 *7,850 5,300 *6,200 5,150 25'05"

0 mm kg *6900 *6900 *7750 4850 5050 3250 3650 2400 *3200 2350 7590 0'0" lb *15,850 *15,850 *16,800 10,400 10,850 7,050 *7,050 5,200 24'10"

–1500 mm kg *5600 *5600 *9950 8700 7700 4750 5000 3200 *3950 2600 7080 –5'0" lb *12,500 *12,500 *22,650 18,650 16,550 10,200 10,750 6,900 *8,700 5,700 23'02"

–3000 mm kg *9200 *9200 *11 000 8800 *7550 4750 5050 3250 4850 3150 6160 –10'0" lb *20,650 *20,650 *23,800 18,900 *16,250 10,250 10,850 7,000 10,750 6,950 20'01"

–4500 mm kg *8450 *8450 *5650 4950 *5450 4800 4610 –15'0" lb *18,000 *18,000 *12,000 10,950 14'09"

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 *3600 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3700 *2550 *2550 7240 15'0" lb *8,700 7,900 *5,600 *5,600 23'07"

3000 mm kg *7900 *7900 *5450 5400 *4550 3550 *3300 2500 *2650 2400 7660 10'0" lb *16,850 *16,850 *11,750 11,600 *9,850 7,600 *6,100 5,350 *5,750 5,300 25'01"

1500 mm kg *6900 *6900 *6850 5050 5150 3350 3700 2450 *2850 2300 7780 5'0" lb *16,550 *16,550 *14,750 10,800 11,050 7,250 *7,850 5,200 *6,200 5,050 25'05"

0 mm kg *6900 *6900 7750 4800 5000 3250 3600 2400 *3200 2350 7590 0'0" lb *15,850 *15,850 16,600 10,300 10,750 6,950 *7,050 5,150 24'10"

–1500 mm kg *5600 *5600 *9950 8600 7600 4700 4950 3150 3900 2550 7080 –5'0" lb *12,500 *12,500 *22,650 18,400 16,350 10,050 10,600 6,800 8,600 5,600 23'02"

–3000 mm kg *9200 *9200 *11 000 8700 *7550 4700 4950 3200 4800 3100 6160 –10'0" lb *20,650 *20,650 *23,800 18,650 *16,250 10,150 10,700 6,900 10,650 6,850 20'01"

–4500 mm kg *8450 *8450 *5650 4900 *5450 4750 4610 –15'0" lb *18,000 *18,000 *12,000 10,800 14'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

Thumb Ready Stick

2.9 m (9'6")

R2.9 TRS

5.1 m (16'9") 600 mm (24") Rubber Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2900 *2900 5100 25'0" lb *6,500 *6,500 16'02"

6000 mm kg *3600 *3600 *2650 *2650 6450 20'0" lb *7,350 *7,350 *5,800 *5,800 20'11"

4500 mm kg *4000 3750 *2550 *2550 7240 15'0" lb *8,700 8,000 *5,600 *5,600 23'07"

3000 mm kg *7900 *7900 *5450 *5450 *4550 3600 *3300 2550 *2650 2450 7660 10'0" lb *16,850 *16,850 *11,750 *11,750 *9,850 7,700 *6,100 5,450 *5,750 5,400 25'01"

1500 mm kg *6900 *6900 6850 5100 *5200 3400 3750 2500 *2850 2350 7780 5'0" lb *16,550 *16,550 *14,750 11,000 *11,250 7,350 *7,850 5,300 *6,200 5,150 25'05"

0 mm kg *6900 *6900 *7750 4850 5100 3300 3700 2400 *3200 2400 7590 0'0" lb *15,850 *15,850 *16,800 10,450 10,950 7,050 *7,050 5,250 24'10"

–1500 mm kg *5600 *5600 *9950 8750 7750 4750 5050 3250 *3950 2600 7080 –5'0" lb *12,500 *12,500 *22,650 18,750 16,650 10,250 10,800 6,950 *8,700 5,700 23'02"

–3000 mm kg *9200 *9200 *11 000 8850 *7550 4800 5050 3250 4900 3150 6160 –10'0" lb *20,650 *20,650 *23,800 19,000 *16,250 10,350 10,900 7,050 10,850 7,000 20'01"

–4500 mm kg *8450 *8450 *5650 5000 *5450 4850 4610 –15'0" lb *18,000 *18,000 *12,000 11,000 14'09"

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

3.1 m (10'2")

R3.1

5.1 m (16'9") 700 mm (28") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2700 *2700 5380 25'0" lb *6,050 *6,050 17'02"

6000 mm kg *3650 *3650 *2450 *2450 6670 20'0" lb *7,550 *7,550 *5,400 *5,400 21'07"

4500 mm kg *3900 3800 *2400 *2400 7440 15'0" lb *8,500 8,150 *5,250 *5,250 24'03"

3000 mm kg *7500 *7500 *5300 *5300 *4500 3650 *3600 2600 *2450 2450 7850 10'0" lb *15,950 *15,950 *11,450 *11,450 *9,700 7,850 *7,100 5,600 *5,400 5,350 25'08"

1500 mm kg *8250 *8250 *6750 5200 *5150 3500 3800 2550 *2650 2300 7960 5'0" lb *19,750 *19,750 *14,550 11,200 *11,200 7,500 8,150 5,450 *5,800 5,100 26'01"

0 mm kg *7150 *7150 *7750 4950 5150 3350 3750 2450 *3000 2350 7780 0'0" lb *16,450 *16,450 *16,800 10,650 11,050 7,200 8,000 5,300 *6,550 5,150 25'05"

–1500 mm kg *5400 *5400 *9700 8800 7800 4850 5050 3300 *3600 2550 7280 –5'0" lb *12,050 *12,050 *22,100 18,900 16,750 10,400 10,900 7,050 *7,950 5,600 23'10"

–3000 mm kg *8700 *8700 *11 400 8900 *7750 4850 5100 3300 4650 3050 6400 –10'0" lb *19,450 *19,450 *24,650 19,100 *16,700 10,400 10,900 7,100 10,300 6,750 20'10"

–4500 mm kg *9100 *9100 *6150 5000 *5450 4450 4920 –15'0" lb *19,350 *19,350 *12,950 10,750 *12,000 10,050 15'09"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.57 mt (7,870 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

3.1 m (10'2")

R3.1

5.1 m (16'9") 600 mm (24") Triple Grouser Track Shoes 3170 mm (10'5")

1990 mm (6'6") 3970 mm (13'0")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *2700 *2700 5380 25'0" lb *6,050 *6,050 17'02"

6000 mm kg *3650 *3650 *2450 *2450 6670 20'0" lb *7,550 *7,550 *5,400 *5,400 21'07"

4500 mm kg *3900 3750 *2400 *2400 7440 15'0" lb *8,500 8,050 *5,250 *5,250 24'03"

3000 mm kg *7500 *7500 *5300 *5300 *4500 3600 *3600 2600 *2450 2400 7850 10'0" lb *15,950 *15,950 *11,450 *11,450 *9,700 7,750 *7,100 5,500 *5,400 5,250 25'08"

1500 mm kg *8250 *8250 *6750 5150 *5150 3450 3750 2500 *2650 2300 7960 5'0" lb *19,750 *19,750 *14,550 11,050 *11,200 7,400 8,050 5,350 *5,800 5,050 26'01"

0 mm kg *7150 *7150 *7750 4900 5100 3300 3700 2450 *3000 2300 7780 0'0" lb *16,450 *16,450…