AEXQ3985_323__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Sound Performance

Standards

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Working Ranges

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb)

Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb)

Heavy Duty (HD) Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb)

Super Long Reach (SLR) Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb)

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment Dealer Installed Kit and Attachments 323 Environmental Declaration

Engine

Engine Model Cat C7.1

Net Power

ISO 9249 128.5 kW 172 hp

ISO 9249 (DIN) 175 hp (metric)

Engine Power

ISO 14396 129.4 kW 174 hp

ISO 14396 (DIN) 176 hp (metric)

Bore 105 mm 4 in

Stroke 135 mm 5 in

Displacement 7.01 L 428 in3

Biodiesel Capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

• Recommended for use up to 4500 m (14,764 ft) altitude with engine power derate above 3000 m (9,842.5 ft).

• Advertised power is tested per the specified standard in effect at the time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

• Engine speed at 2,200 rpm.

(1)�Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

20% biodiesel FAME (fatty acid methyl ester)* �100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 11.25 rpm

Maximum Swing Torque 82 kN·m 60,300 lbf·ft

Weights

Operating Weight 25 500 kg 56,200 lb

• Long undercarriage, Heavy Duty (HD) Reach boom, R2.9 (9'6"), HD Thumb Ready Reach stick, HD 1.38 m3 (1.81 yd3) bucket, 790 mm (31") HD triple grouser track shoes and 5.4 mt (11,900 lb) counterweight.

Operating Weight 25 000 kg 55,100 lb

• Long undercarriage, Reach boom, R2.9 (9'6"), Reach stick, HD 1.38 m3 (1.81 yd3) bucket, 790 mm (31") HD triple grouser track shoes and 5.4 mt (11,900 lb) counterweight.

Track

Standard Track Shoe Width 790 mm 31 in

Optional Track Shoe Width 600 mm 24 in

Number of Shoes (each side) 49

Number of Track Rollers (each side) 8

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.7 km/h 3.5 mph

Maximum Drawbar Pull – Long Undercarriage

203 kN 45,614 lbf

Hydraulic System

Main System – Maximum Flow – Implement

429 L/min (214.5 × 2 pumps)

113 gal/min (56.5 × 2 pumps)

Maximum Pressure – Equipment – Normal

35 000 kPa 5,075 psi

Maximum Pressure – Equipment – Heavy Lift Mode/Auto Dig Boost

38 000 kPa 5,510 psi

Maximum Pressure – Travel 34 300 kPa 4,974 psi

Maximum Pressure – Swing 27 500 kPa 3,998 psi

Boom Cylinder – Bore 120 mm 4.7 in

Boom Cylinder – Stroke 1260 mm 49.6 in

Boom Cylinder – Bore – Heavy Lift* 125 mm 5 in

Boom Cylinder – Stroke – Heavy Lift* 1260 mm 50 in

Stick Cylinder – Bore 140 mm 5.5 in

Stick Cylinder – Stroke 1504 mm 59.2 in

Bucket Cylinder – Bore 120 mm 4.7 in

Bucket Cylinder – Stroke 1104 mm 43.5 in

*�For use with 5.4 mt (11,900 lb) counterweight only.

323 Hydraulic Excavator Specifications

Operating Weights and Ground Pressures

Base Machine Configurations

790 mm (31 in) HD Triple Grouser Shoes

Weight Ground Pressure kg lb kPa psi

Base Frame with Track Rollers and Carrier Rollers

5.4 mt (11,900 lb) Counterweight + Long Undercarriage Base Machine

HD Reach Boom, R2.9 (9'6") HD Thumb Ready Reach Stick,

1.38 m3 (1.81 yd3) HD Bucket 25 500 (56,200) 40.3 (5.8)

Reach Boom + R2.9 (9'6") Reach Stick + 1.38 m3 (1.81 yd3) HD Bucket 25 000 (55,100) 39.5 (5.7)

Super Long Reach Boom + 6.28A (20'7") Super Long Reach Stick + 0.53 m3 (0.69 yd3) GD Bucket 25 100 (55,300) 39.7 (5.7)

4.2 mt (9,300 lb) Counterweight + Long Undercarriage Base Machine Reach Boom + R2.9 (9'6") Reach Stick + 1.19 m3 (1.56 yd3) HD Bucket 23 000 (50,700) 36.3 (5.3)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

323 Hydraulic Excavator Specifications

Service Refill Capacities

Fuel Tank Capacity 345 L 86.6 gal

Cooling System 25 L 6.6 gal

Engine Oil 25 L 6.6 gal

Swing Drive (each) 6 L 1.6 gal

Final Drive (each) 5 L 1.3 gal

Hydraulic System (including tank) 234 L 61.8 gal

Hydraulic Tank 115 L 30.4 gal

Diesel Exhaust Fluid (DEF) Tank 41 L 10.8 gal

Sound Performance

ISO 6395:2008 (external) 100 dB(A)

ISO 6396:2008 (inside cab) 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab/Operator Protective Guards (OPG) (optional)

ISO 10262:1998 Level II

Major Component Weights kg lb Base Machine (with 4.2 mt [9,300 lb] counterweight, semi-HD swing frame, standard base frame with HD track rollers and standard carrier rollers for long undercarriage, without boom cylinders – does not include 90% fuel and 75 kg [165 lb] operator)

14 800 32,600

Base Machine (with 5.4 mt [11,900 lb] counterweight, HD swing frame, HD base frame with SD track rollers and standard carrier rollers for long undercarriage, without boom cylinders – does not include 90% fuel and 75 kg [165 lb] operator)

16 700 36,800

Track Shoes:

600 mm (24 in) Width, 14 mm (0.55 in) Thick Single Grouser Track Shoes 3090 6,800

790 mm (31 in) Width, 12.5 mm (0.49 in) Thick Triple Grouser HD Track Shoes with Step Extension 3800 8,400

Boom Cylinders 340 750

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 310 680

Counterweights:

4.2 mt (9,300 lb) Counterweight 4200 9,300

5.4 mt (11,900 lb) Counterweight 5400 11,900

Swing Frames:

Semi-HD Swing Frame 1910 4,210

HD Swing Frame 2090 4,600

Undercarriages:

Standard Base Frame with HD Track Rollers and Standard Carrier Rollers 4420 9,700

HD Base Frame with SD Track Rollers and Standard Carrier Rollers 4470 9,900

Booms (including lines, pins, stick cylinder):

Reach Boom 5.7 m (18'8") 1710 3,800

HD Reach Boom 5.7 m (18'8") 2010 4,400

Super Long Reach (SLR) Boom 8.85 m (29'0") 2170 4,800

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R3.9B1 (12'10") 1300 2,900

Reach Stick R2.9B1 (9'6") 1080 2,400

HD Thumb Ready Reach Stick R2.9B1 (9'6") 1300 2,900

Super Long Reach Stick 6.28A (20'7'') 1340 3,000

Buckets (without linkage):

1.19 m3 (1.56 yd3) HD 960 2,100

1.38 m3 (1.81 yd3) HD 1040 2,300

0.57 m3 (0.75 yd3) Ditch Cleaning (DC) 390 900

0.53 m3 (0.69 yd3) General Duty (GD) 410 900

Quick Coupler:

Pin Grabber 390 850

Universal 230 500

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Options Reach Boom

5.7 m (18'8")

HD Reach Boom

5.7 m (18'8")

Super Long Reach Boom

8.85 m (29'0")

Stick Options Reach Stick

HD Thumb Ready Stick

Super Long Reach Stick

R2.9B1 (9'6") R3.9B1 (12'10") R2.9B1 (9'6") 6.28A (20'7") 1 Machine Height:

Top of Cab Height 2960 mm 9'9" 2960 mm 9'9" 2960 mm 9'9" 2960 mm 9'9"

Top of Global Navigation Satellite System (GNSS) Antenna Height (if installed)

3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10"

Top of OPG Height 3100 mm 10'2" 3100 mm 10'2" 3100 mm 10'2" 3100 mm 10'2"

Handrail Height 2950 mm 9'8" 2950 mm 9'8" 2950 mm 9'8" 2950 mm 9'8"

With Boom/Stick/Bucket Installed 3160 mm 10'4" 3470 mm 11'5" 3160 mm 10'4" 3190 mm 10'5"

With Boom/Stick Installed 2910 mm 9'7" 3190 mm 10'6" 2910 mm 9'7" 3070 mm 10'1"

With Boom Installed 2480 mm 8'2" 2480 mm 8'2" 2480 mm 8'2" 2650 mm 8'9"

2 Machine Length:

With Boom/Stick/Bucket Installed 9530 mm 31'3" 9500 mm 31'2" 9530 mm 31'3" 12 750 mm 41'10"

With Boom/Stick Installed 9500 mm 31'2" 9530 mm 31'3" 9500 mm 31'2" 12 760 mm 41'10"

With Boom Installed 8450 mm 27'9" 8450 mm 27'9" 8450 mm 27'9" 8920 mm 29'3"

3 Upperframe Width 2780 mm 9'1" 2780 mm 9'1" 2780 mm 9'1" 2780 mm 9'1"

4 Tail Swing Radius 2830 mm 9'3" 2830 mm 9'3" 2830 mm 9'3" 2830 mm 9'3"

5 Counterweight Clearance 1050 mm 3'5" 1050 mm 3'5" 1050 mm 3'5" 1050 mm 3'5"

6 Ground Clearance 470 mm 1'7" 470 mm 1'7" 470 mm 1'7" 470 mm 1'7"

7 Track Length 4450 mm 14'7" 4450 mm 14'7" 4450 mm 14'7" 4450 mm 14'7"

8 Length to Center of Rollers 3650 mm 12'0" 3650 mm 12'0" 3650 mm 12'0" 3650 mm 12'0"

9 Track Gauge 2380 mm 7'10" 2380 mm 7'10" 2380 mm 7'10" 2380 mm 7'10"

10 Undercarriage Width:

600 mm (24 in) Shoes 2980 mm 9'9" 2980 mm 9'9" 2980 mm 9'9" 2980 mm 9'9"

790 mm (31 in) Shoes 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5"

Bucket Type HD HD HD GD

Bucket Capacity 1.14 m3 1.50 yd3 1.19 m3 1.56 yd3 1.19 m3 1.56 yd3 0.53 m3 0.69 yd3

Bucket Tip Radius 1470 mm 4'10" 1570 mm 5'2" 1570 mm 5'2" 1230 mm 4'0"

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

0123456789101112 –1 m m

R3.9B1 (12'10")

HD R2.9B1 (9'6")

R2.9B1 (9'6")

05101520253035 ft ft

7 6

Boom Options Reach Boom

5.7 m (18'8")

Reach Boom

5.7 m (18'8")

HD Reach Boom

5.7 m (18'8")

Stick Options Reach Stick

Reach Stick

HD Thumb Ready Stick

R2.9B1 (9'6") R3.9B1 (12'10") R2.9B1 (9'6") 1 Maximum Digging Depth 6620 mm 21'9" 7670 mm 25'2" 6730 mm 22'1"

2 Maximum Reach at Ground Line 9760 mm 32'0" 10 770 mm 35'4" 9870 mm 32'5"

3 Maximum Cutting Height 9330 mm 30'7" 9910 mm 32'6" 9450 mm 31'0"

4 Maximum Loading Height 6590 mm 21'7" 6930 mm 22'9" 6480 mm 21'3"

5 Minimum Loading Height 2270 mm 7'5" 1220 mm 4'0" 2160 mm 7'1"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 6440 mm 21'2" 7530 mm 24'8" 6560 mm 21'6"

7 Maximum Vertical Wall Digging Depth 5360 mm 17'7" 6640 mm 21'9" 5740 mm 18'10"

Bucket Digging Force (ISO) 163 kN 39,977 lbf 140 kN 34,308 lbf 140 kN 34,308 lbf

Stick Digging Force (ISO) 109 kN 26,665 lbf 87 kN 21,416 lbf 107 kN 26,094 lbf

Bucket Digging Force (ISO) – Auto Dig Boost 177 kN 43,404 lbf 152 kN 37,248 lbf 152 kN 37,248 lbf

Stick Digging Force (ISO) – Auto Dig Boost 118 kN 28,950 lbf 95 kN 23,252 lbf 116 kN 28,331 lbf

Bucket Type HD HD HD

Bucket Capacity 1.14 m3 1.50 yd3 1.19 m3 1.56 yd3 1.19 m3 1.56 yd3

Bucket Tip Radius 1470 mm 4'10" 1570 mm 5'2" 1570 mm 5’2”

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

121315 10 911 8 7 6 5 4 3 2 1 0 –2 –3–1 m m

1416181920 17

6.28A (20'7") ft35 304045 25 20 15 10 5 –50506065 55 ft

Boom Option SLR Boom

8.85 m (29'0")

Stick Options SLR Stick 6.28A (20'7")

1 Maximum Digging Depth 11 540 mm 37'10"

2 Maximum Reach at Ground Line 15 570 mm 51'1"

3 Maximum Cutting Height 13 540 mm 44'5"

4 Maximum Loading Height 11 440 mm 37'6"

5 Minimum Loading Height 2240 mm 7'4"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 11 440 mm 37'6"

7 Maximum Vertical Wall Digging Depth 11 020 mm 36'2"

Bucket Digging Force (ISO) 60 kN 13,549 lbf

Stick Digging Force (ISO) 49 kN 10,935 lbf

Bucket Type DC

Bucket Capacity 0.57 m3 0.75 yd3

Bucket Tip Radius 1070 mm 3'6"

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb) – without Bucket

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31 in) HD Triple Grouser Shoes 3650 mm (11'11")

R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4950 *4950 *4300 *4300 6150 300 in lb *9,550 *9,550 240

6000 mm kg *5450 *5450 *4000 *4000 7290 240 in lb *11,950 *11,950 *8,800 *8,800 290

4500 mm kg *6000 5600 *5650 3950 *3900 3600 7990 180 in lb *13,000 12,000 *12,350 8,500 *8,600 7,900 320

3000 mm kg *8700 8100 *6850 5350 5950 3850 *4000 3300 8360 120 in lb *18,750 17,500 *14,900 11,500 12,750 8,300 *8,800 7,250 330

1500 mm kg *10 550 7600 *7800 5100 5800 3750 *4250 3200 8450 60 in lb *22,800 16,400 *16,900 11,000 12,500 8,050 *9,350 6,950 340 0 mm kg *6600 *6600 *11 600 7350 7900 4950 5700 3650 *4700 3250 8260

0 in lb *15,200 *15,200 *25,050 15,800 17,000 10,650 12,300 7,900 *10,350 7,100 330 –1500 mm kg *7100 *7100 *11 400 *11 400 *11 700 7250 7800 4850 5700 3650 5450 3500 7780

–60 in lb *15,800 *15,800 *25,900 *25,900 *25,350 15,600 16,800 10,500 12,250 7,850 11,950 7,650 310 –3000 mm kg *12 100 *12 100 *15 500 14 100 *10 950 7300 7850 4900 6400 4100 6950

–120 in lb *27,150 *27,150 *33,600 30,150 *23,700 15,750 16,900 10,550 14,200 9,050 280 –4500 mm kg *12 400 *12 400 *8950 7550 *6750 5600 5600

–180 in lb *26,550 *26,550 *19,000 16,250 *14,850 12,600 220

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb) – without Bucket

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24 in) Single Grouser Shoes 3650 mm (11'11")

R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4950 *4950 *4300 *4300 6150 300 in lb *9,550 *9,550 240

6000 mm kg *5450 *5450 *4000 *4000 7290 240 in lb *11,950 *11,950 *8,800 *8,800 290

4500 mm kg *6000 5450 *5650 3850 *3900 3500 7990 180 in lb *13,000 11,700 *12,350 8,250 *8,600 7,700 320

3000 mm kg *8700 7900 *6850 5200 5750 3750 *4000 3200 8360 120 in lb *18,750 17,050 *14,900 11,200 12,400 8,050 *8,800 7,000 330

1500 mm kg *10 550 7400 *7800 4950 5650 3650 *4250 3100 8450 60 in lb *22,800 15,950 *16,900 10,700 12,150 7,850 *9,350 6,750 340 0 mm kg *6600 *6600 *11 600 7100 7650 4800 5550 3550 *4700 3150 8260

0 in lb *15,200 *15,200 *25,050 15,350 16,500 10,350 11,950 7,650 *10,350 6,900 330 –1500 mm kg *7100 *7100 *11 400 *11 400 *11 700 7050 7600 4750 5550 3550 5250 3400 7780

–60 in lb *15,800 *15,800 *25,900 *25,900 *25,350 15,150 16,300 10,200 11,900 7,600 11,600 7,450 310 –3000 mm kg *12 100 *12 100 *15 500 13 700 *10 950 7100 7650 4750 6200 3950 6950

–120 in lb *27,150 *27,150 *33,600 29,350 *23,700 15,300 16,400 10,250 13,750 8,750 280 –4500 mm kg *12 400 *12 400 *8950 7300 *6750 5450 5600

–180 in lb *26,550 *26,550 *19,000 15,800 *14,850 12,250 220

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb) – without Bucket

3.9 m (12'10") 5.7 m (18'8") 790 mm �(31 in) Triple Grouser Shoes 3650 mm (11'11")

R3.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in 9000 mm/360 in mm in

7500 mm kg *3000 *3000 7320 300 in lb *6,600 *6,600 290

6000 mm kg *4500 4050 *2800 *2800 8300 240 in lb *9,600 8,600 *6,150 *6,150 330

4500 mm kg *4750 3950 *2750 *2750 8920 180 in lb *10,400 8,450 *6,050 *6,050 350

3000 mm kg *7100 *7100 *5850 5350 *5250 3800 *3850 2850 *2800 2700 9250 120 in lb *15,250 *15,250 *12,700 11,500 *11,400 8,150 *7,150 6100 *6,150 5,950 370

1500 mm kg *9800 *9800 *9200 7650 *6900 5050 5750 3650 4350 2750 *2950 2600 9330 60 in lb *23,300 *23,300 *19,800 16,450 *15,000 10,850 12,300 7,850 *8,500 5950 *6,450 5,750 370

0 mm kg *8100 *8100 *10 700 7200 7750 4800 5600 3500 *4150 2700 *3200 2650 9160 0 in lb *18,450 *18,450 *23,150 15,450 16,700 10,300 12,000 7,550 *7,250 5800 *7,050 5,800 360

–1500 mm kg *6050 *6050 *10 400 *10 400 *11 350 7000 7600 4650 5500 3450 *3650 2800 8730 –60 in lb *13,500 *13,500 *23,550 *23,550 *24,600 15,000 16,350 10,000 11,800 7,400 *8,050 6,150 350

–3000 mm kg *9400 *9400 *14 450 13 400 *11 200 6950 7550 4600 5500 3450 *4450 3150 8000 –120 in lb *21,100 *21,100 *32,750 28,750 *24,250 14,950 16,300 9,950 11,800 7,400 *9,850 7,000 320

–4500 mm kg *13 650 *13 650 *14 600 13 700 *10 100 7100 *7400 4700 *6050 3950 6870 –180 in lb *30,750 *30,750 *31,350 29,400 *21,750 15,250 *15,800 10,200 *13,300 8,850 270

–6000 mm kg *7150 *7150 *6350 *6350 4910 –240 in lb

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb) – without Bucket

3.9 m (12'10") 5.7 m (18'8") 600 mm �(24 in) Single Grouser Shoes 3650 mm (11'11")

R3.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in 9000 mm/360 in mm in

7500 mm kg *3000 *3000 7320 300 in lb *6,600 *6,600 290

6000 mm kg *4500 3900 *2800 *2800 8300 240 in lb *9,600 8,400 *6,150 *6,150 330

4500 mm kg *4750 3850 *2750 *2750 8920 180 in lb *10,400 8,250 *6,050 *6,050 350

3000 mm kg *7100 *7100 *5850 5200 *5250 3700 *3850 2750 *2800 2650 9250 120 in lb *15,250 *15,250 *12,700 11,200 *11,400 7,950 *7,150 5,900 *6,150 5,800 370

1500 mm kg *9800 *9800 *9200 7450 *6900 4900 5550 3550 4200 2700 *2950 2550 9330 60 in lb *23,300 *23,300 *19,800 16,000 *15,000 10,550 11,950 7,600 *8,500 5,750 *6,450 5,550 370

0 mm kg *8100 *8100 *10 700 7000 7550 4650 5400 3400 4150 2650 *3200 2550 9160 0 in lb *18,450 *18,450 *23,150 15,000 16,200 10,000 11,600 7,300 *7,250 5,650 *7,050 5,600 360

–1500 mm kg *6050 *6050 *10 400 *10 400 *11 350 6750 7400 4500 5300 3350 *3650 2700 8730 –60 in lb *13,500 *13,500 *23,550 *23,550 *24,600 14,550 15,850 9,700 11,450 7,150 *8,050 5,950 350

–3000 mm kg *9400 *9400 *14 450 13 050 *11 200 6750 7350 4500 5300 3350 *4450 3050 8000 –120 in lb *21,100 *21,100 *32,750 27,900 *24,250 14,500 15,800 9,650 11,450 7,150 *9,850 6,800 320

–4500 mm kg *13 650 *13 650 *14 600 13 350 *10 100 6850 *7400 4550 *6050 3850 6870 –180 in lb *30,750 *30,750 *31,350 28,550 *21,750 14,800 *15,800 9,850 *13,300 8,600 270

–6000 mm kg *7150 *7150 *6350 *6350 4910 –240 in lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31 in) HD Triple Grouser Shoes 3650 mm (11'11")

R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4950 *4950 *4300 *4300 6150 300 in lb *9,550 *9,550 240

6000 mm kg *5450 *5450 *4000 *4000 7290 240 in lb *11,950 *11,950 *8,800 *8,800 290

4500 mm kg *6000 *6000 *5650 4600 *3900 *3900 7990 180 in lb *13,000 *13,000 *12,350 9,850 *8,600 *8,600 320

3000 mm kg *8700 *8700 *6850 6200 *6000 4500 *4000 3850 8360 120 in lb *18,750 *18,750 *14,900 13,300 *13,100 9,650 *8,800 8,450 330

1500 mm kg *10 550 8800 *7800 5950 *6450 4400 *4250 3700 8450 60 in lb *22,800 19,000 *16,900 12,800 *14,050 9,450 *9,350 8,200 340 0 mm kg *6600 *6600 *11 600 8550 *8450 5750 6550 4300 *4700 3800 8260

0 in lb *15,200 *15,200 *25,050 18,400 *18,350 12,450 14,050 9,250 *10,350 8,350 330 –1500 mm kg *7100 *7100 *11 400 *11 400 *11 700 8450 *8650 5700 6500 4250 *5500 4100 7780

–60 in lb *15,800 *15,800 *25,900 *25,900 *25,350 18,200 *18,750 12,300 14,000 9,200 *12,150 9,000 310 –3000 mm kg *12 100 *12 100 *15 500 *15 500 *10 950 8550 *8150 5750 *6700 4750 6950

–120 in lb *27,150 *27,150 *33,600 *33,600 *23,700 18,350 *17,550 12,350 *14,750 10,550 280 –4500 mm kg *12 400 *12 400 *8950 8750 *6750 6500 5600

–180 in lb *26,550 *26,550 *19,000 18,850 *14,850 14,600 220

Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24 in) Single Grouser Shoes 3650 mm (11'11")

R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4950 *4950 *4300 *4300 6150 300 in lb *9,550 *9,550 240

6000 mm kg *5450 *5450 *4000 *4000 7290 240 in lb *11,950 *11,950 *8,800 *8,800 290

4500 mm kg *6000 *6000 *5650 4500 *3900 *3900 7990 180 in lb *13,000 *13,000 *12,350 9,650 *8,600 *8,600 320

3000 mm kg *8700 *8700 *6850 6050 *6000 4400 *4000 3750 8360 120 in lb *18,750 *18,750 *14,900 13,000 *13,100 9,450 *8,800 8,250 330

1500 mm kg *10 550 8600 *7800 5800 6450 4300 *4250 3650 8450 60 in lb *22,800 18,550 *16,900 12,500 13,900 9,200 *9,350 7,950 340 0 mm kg *6600 *6600 *11 600 8350 *8450 5650 6350 4200 *4700 3700 8260

0 in lb *15,200 *15,200 *25,050 17,950 *18,350 12,100 13,700 9,000 *10,350 8,100 330 –1500 mm kg *7100 *7100 *11 400 *11 400 *11 700 8250 *8650 5550 6350 4150 *5500 4000 7780

–60 in lb *15,800 *15,800 *25,900 *25,900 *25,350 17,750 18,700 11,950 13,650 9,000 *12,150 8,750 310 –3000 mm kg *12 100 *12 100 *15 500 *15 500 *10 950 8300 *8150 5600 *6700 4650 6950

–120 in lb *27,150 *27,150 *33,600 *33,600 *23,700 17,900 *17,550 12,050 *14,750 10,300 280 –4500 mm kg *12 400 *12 400 *8950 8550 *6750 6350 5600

–180 in lb *26,550 *26,550 *19,000 18,400 *14,850 14,250 220

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

3.9 m (12'10") 5.7 m (18'8") 790 mm �(31 in) HD Triple Grouser Shoes 3650 mm (11'11")

R3.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *3000 *3000 7320 300 in lb *6,600 *6,600 290

6000 mm kg *4500 *4500 *2800 *2800 8300 240 in lb *9,600 *9,600 *6,150 *6,150 330

4500 mm kg *4750 4550 *2750 *2750 8920 180 in lb *10,400 9,800 *6,050 *6,050 350

3000 mm kg *7100 *7100 *5850 *5850 *5250 4450 *2800 *2800 9250 120 in lb *15,250 *15,250 *12,700 *12,700 *11,400 9,500 *6,150 *6,150 370

1500 mm kg *9800 *9800 *9200 8850 *6900 5850 *5800 4250 *2950 *2950 9330 60 in lb *23,300 *23,300 *19,800 19,050 *15,000 12,650 *12,600 9,200 *6,450 *6,450 370

0 mm kg *8100 *8100 *10 700 8400 *7800 5,600 *6300 4150 *3200 3150 9160 0 in lb *18,450 *18,450 *23,150 18,050 *16,900 12,100 *13,650 8,900 *7,050 6,900 360

–1500 mm kg *6050 *6050 *10 400 *10 400 *11 350 8200 *8300 5500 6300 4050 *3650 3350 8730 –60 in lb *13,500 *13,500 *23,550 *23,550 *24,600 17,600 *18,000 11,800 13,550 8,750 *8,050 7,300 350

–3000 mm kg *9400 *9400 *14 450 *14 450 *11 200 8150 *8300 5450 6300 4050 *4450 3750 8000 –120 in lb *21,100 *21,100 *32,750 *32,750 *24,250 17,550 *17,900 11,700 13,550 8,750 *9,850 8,300 320

–4500 mm kg *13 650 *13 650 *14 600 *14 600 *10 100 8300 *7400 5550 *6050 4650 6870 –180 in lb *30,750 *30,750 *31,350 *31,350 *21,750 17,850 *15,800 11,950 *13,300 10,400 270

–6000 mm kg *7150 *7150 *6350 *6350 4910 –240 in lb

Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

3.9 m (12'10") 5.7 m (18'8") 600 mm �(24 in) Single Grouser Shoes 3650 mm (11'11")

R3.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *3000 *3000 7320 300 in lb *6,600 *6,600 290

6000 mm kg *4500 *4500 *2800 *2800 8300 240 in lb *9,600 *9,600 *6,150 *6,150 330

4500 mm kg *4750 4450 *2750 *2750 8920 180 in lb *10,400 9,600 *6,050 *6,050 350

3000 mm kg *7100 *7100 *5850 *5850 *5250 4300 *2800 *2800 9250 120 in lb *15,250 *15,250 *12,700 *12,700 *11,400 9,300 *6,150 *6,150 370

1500 mm kg *9800 *9800 *9200 8650 *6900 5700 *5800 4150 *2950 *2950 9330 60 in lb *23,300 *23,300 *19,800 18,600 *15,000 12,300 *12,600 8,950 *6,450 *6,450 370

0 mm kg *8100 *8100 *10 700 8200 *7800 5500 6200 4050 *3200 3050 9160 0 in lb *18,450 *18,450 *23,150 17,600 *16,900 11,800 13,350 8,650 *7,050 6,700 360

–1500 mm kg *6050 *6050 *10 400 *10 400 *11 350 7950 *8300 5350 6100 3950 *3650 3250 8730 –60 in lb *13,500 *13,500 *23,550 *23,550 *24,600 17,150 *18,000 11,500 13,150 8,500 *8,050 7,100 350

–3000 mm kg *9400 *9400 *14 450 *14 450 *11 200 7950 *8300 5300 6100 3950 *4450 3650 8000 –120 in lb *21,100 *21,100 *32,750 32,700 *24,250 17,100 *17,900 11,400 13,200 8,500 *9,850 8,050 320

–4500 mm kg *13 650 *13 650 *14 600 *14 600 *10 100 8050 *7400 5400 *6050 4550 6870 –180 in lb *30,750 *30,750 *31,350 *31,350 *21,750 17,400 *15,800 11,650 *13,300 10,150 270

–6000 mm kg *7150 *7150 *6350 *6350 4910 –240 in lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

HD Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

HD TRS 2.9 m (9'6") 5.7 m (18'8") HD 790 mm �(31 in) HD Triple Grouser Shoes 3650 mm (11'11")

HD TRS R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4900 *4900 *4250 *4250 6150 300 in lb *9,400 *9,400 240

6000 mm kg *5250 *5250 *3900 *3900 7290 240 in lb *11,500 *11,500 *8,650 *8,650 290

4500 mm kg *5750 *5750 *5400 4450 *3850 *3850 7990 180 in lb *12,550 *12,550 *11,850 9,500 *8,450 *8,450 320

3000 mm kg *8400 *8400 *6600 6000 *5750 4300 *3950 3650 8360 120 in lb *18,150 *18,150 *14,300 12,900 *12,550 9,300 *8,600 8,050 330

1500 mm kg *10 200 8500 *7500 5700 *6200 4200 *4150 3550 8450 60 in lb *21,950 18,350 *16,200 12,300 *13,450 9,000 *9,150 7,750 340 0 mm kg *6550 *6550 *11 150 8200 *8150 5500 6350 4100 *4600 3600 8260

0 in lb *15,050 *15,050 *24,100 17,650 *17,600 11,850 13,600 8,800 *10,150 7,900 330 –1500 mm kg *7000 *7000 *11 350 *11 350 *11 250 8100 *8300 5450 6300 4050 *5400 3850 7780

–60 in lb *15,650 *15,650 *25,750 *25,750 *24,350 17,400 *17,950 11,700 13,550 8,700 *11,950 8,500 310 –3000 mm kg *12 050 *12 050 *14 900 *14 900 *10 500 8150 *7800 5450 *6400 4550 6950

–120 in lb *27,000 *27,000 *32,300 *32,300 *22,750 17,600 *16,800 11,800 *14,050 10,050 280 –4500 mm kg *11 850 *11 850 *8550 8400 *6450 6250 5600

–180 in lb *25,350 *25,350 *18,150 *18,150 *14,150 14,050 220

HD Reach Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

HD TRS 2.9 m (9'6") 5.7 m (18'8") HD 600 mm �(24 in) Single Grouser Shoes 3650 mm (11'11")

HD TRS R2.9B1

2380 mm (7'9") 4450 mm (14'7")

1500 mm/60 in 3000 mm/120 in 4500 mm/180 in 6000 mm/240 in 7500 mm/300 in mm in

7500 mm kg *4900 *4900 *4250 *4250 6150 300 in lb *9,400 *9,400 240

6000 mm kg *5250 *5250 *3900 *3900 7290 240 in lb *11,500 *11,500 *8,650 *8,650 290

4500 mm kg *5750 *5750 *5400 4350 *3850 *3850 7990 180 in lb *12,550 *12,550 *11,850 9,300 *8,450 *8,450 320

3000 mm kg *8400 *8400 *6600 5850 *5750 4200 *3950 3550 8360 120 in lb *18,150 *18,150 *14,300 12,600 *12,550 9,050 *8,600 7,850 330

1500 mm kg *10 200 8300 *7500 5550 *6200 4100 *4150 3450 8450 60 in lb *21,950 17,900 *16,200 12,000 *13,450 8,750 *9,150 7,550 340 0 mm kg *6550 *6550 *11 150 8000 *8150 5350 6150 3950 *4600 3500 8260

0 in lb *15,050 *15,050 *24,100 17,200 *17,600 11,550 13,250 8,550 *10,150 7,650 330 –1500 mm kg *7000 *7000 *11 350 *11 350 *11 250 7900 *8300 5300 6150 3950 *5400 3750 7780

–60 in lb *15,650 *15,650 *25,750 *25,750 *24,350 16,950 *17,950 11,350 13,200 8,500 *11,950 8,300 310 –3000 mm kg *12 050 *12 050 *14 900 *14 900 *10 500 7950 *7800 5300 *6400 4400 6950

–120 in lb *27,000 *27,000 *32,300 *32,300 *22,750 17,100 *16,800 11,450 *14,050 9,800 280 –4500 mm kg *11 850 *11 850 *8550 8200 *6450 6100 5600

–180 in lb *25,350 *25,350 *18,150 17,700 *14,150 13,700 220

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

SLR Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

6.28 m (20'7") 8.85 m (29'0") 790 mm (31") HD Triple Grouser Shoes 3650 mm (12'0")

2380 mm (7'9") 4450 mm (14'7")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.30

10.5 m kg *1350 *1350 11.66

35.0 ft lb *2,950 *2,950 38.33

9.0 m kg *1300 *1300 12.66

30.0 ft lb *2,850 *2,850 41.67

7.5 m kg *1250 *1250 13.41

25.0 ft lb *2,800 *2,800 44.17

6.0 m kg *1250 *1250 13.97

20.0 ft lb *2,750 *2,750 45.83

4.5 m kg *1300 *1300 14.34

15.0 ft lb *2,800 *2,800 47.50

3.0 m kg *4700 *4700 *6050 *6050 *4450 *4450 *3600 *3600 *1300 *1300 14.55

10.0 ft lb *11,800 *11,800 *12,900 *12,900 *9,550 *9,550 *7,800 *7,800 *2,900 *2,900 48.33

1.5 m kg *6750 *6750 *5250 5250 *4100 3900 *1400 *1400 14.60

5.0 ft lb *15,950 *15,950 *11,300 11,300 *8,850 8,400 *3,000 *3,000 48.33

0 m kg *2000 *2000 *4650 *4650 *5900 4800 *4550 3600 *1450 1350 14.49 0 ft lb *4,550 *4,550 *10,700 *10,700 *12,700 10,350 *9,800 7,750 *3,200 3,000 47.50

–1.5 m kg *2100 *2100 *2700 *2700 *4650 *4650 *6250 4500 *4850 3400 *1550 1400 14.23 –5.0 ft lb *4,600 *4,600 *6,050 *6,050 *10,500 *10,500 *13,550 9,700 *10,450 7,300 *3,450 3,050 46.67 –3.0 m kg *2850 *2850 *3500 *3500 *5200 *5200 *6400 4400 *5000 3250 *1750 1450 13.79

–10.0 ft lb *6,350 *6,350 *7,850 *7,850 *11,700 *11,700 *13,900 9,400 *10,800 7,050 *3,800 3,150 45.83 –4.5 m kg *3650 *3650 *4400 *4400 *6050 *6050 *6400 4350 *5050 3200 *1950 1550 13.17

–15.0 ft lb *8,150 *8,150 *9,900 *9,900 *13,700 *13,700 *13,800 9,350 *10,850 6,900 *4,300 3,400 43.33 –6.0 m kg *4550 *4550 *5400 *5400 *7200 6650 *6150 4400 *4900 3250 *2300 1700 12.34

–20.0 ft lb *10,100 *10,100 *12,150 *12,150 *16,300 14,350 *13,250 9,450 *10,550 6,950 *5,100 3,750 40.83 –7.5 m kg *5500 *5500 *6550 *6550 *7300 6850 *5650 4500 *4550 3300 *2700 2000 11.24

–25.0 ft lb *12,250 *12,250 *14,800 *14,800 *15,650 14,750 *12,150 9,700 *9,750 7,100 *5,950 4,400 36.67 –9.0 m kg *7950 *7950 *6150 *6150 *4850 4700 *3900 3450 *2700 2500 9.80

–30.0 ft lb *17,450 *17,450 *13,100 *13,100 *10,350 10,100 *8,300 7,450 *5,900 5,600 31.67

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

(continued on next page)

SLR Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket (continued)

6.28 m (20'7") 8.85 m (29'0") 790 mm (31") HD Triple Grouser Shoes 3650 mm (12'0")

2380 mm (7'9") 4450 mm (14'7")

9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft 13.5 m/45.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.30

10.5 m kg *2200 *2200 *1350 *1350 11.66

35.0 ft lb *4,850 *4,850 *2,950 *2,950 38.33

9.0 m kg *2200 *2200 *2200 *2200 *1300 *1300 12.66

30.0 ft lb *4,800 *4,800 *4,200 *4,200 *2,850 *2,850 41.67

7.5 m kg *2250 *2250 *2200 *2200 *1250 *1250 13.41

25.0 ft lb *4,900 *4,900 *4,850 4,850 *2,800 *2,800 44.17

6.0 m kg *2400 *2400 *2300 2200 *2100 1750 *1250 *1250 13.97

20.0 ft lb *5,200 *5,200 *5,000 4,750 *3,700 *3,700 *2,750 *2,750 45.83

4.5 m kg *2800 *2800 *2550 *2550 *2400 2150 *2300 1700 *1300 *1300 14.34

15.0 ft lb *6,050 *6,050 *5,550 *5,550 *5,200 4,550 *5,000 3,650 *2,800 *2,800 47.50

3.0 m kg *3100 *3100 *2800 2550 *2550 2050 *2400 1650 *1300 *1300 14.55

10.0 ft lb *6,750 *6,750 *6,000 5,450 *5,500 4,350 *5,150 3,500 *2,900 *2,900 48.33

1.5 m kg *3450 3000 *3000 2400 *2700 1950 *2450 1600 *1400 *1400 14.60

5.0 ft lb *7,400 6,500 *6,450 5,150 *5,800 4,150 *5,350 3,400 *3,000 *3,000 48.33

0 m kg *3700 2850 *3200 2300 *2800 1850 2550 1550 *1450 1350 14.49 0 ft lb *8,050 6,050 *6,900 4,900 *6,100 4,000 5,450 3,300 *3,200 3,000 47.50

–1.5 m kg *3950 2700 *3350 2150 *2950 1800 2500 1500 *1550 1400 14.23 –5.0 ft lb *8,550 5,750 *7,250 4,650 6,300 3,850 5,350 3,200 *3,450 3,050 46.67 –3.0 m kg *4100 2600 *3450 2100 2900 1750 2450 1500 *1750 1450 13.79

–10.0 ft lb *8,850 5,550 *7,450 4,500 6,200 3,750 *4,200 3,150 *3,800 3,150 45.83 –4.5 m kg *4100 2550 3450 2050 2900 1750 *1950 1550 13.17

–15.0 ft lb *8,900 5,450 7,400 4,450 6,200 3,700 *4,300 3,400 43.33 –6.0 m kg *4000 2550 *3350 2100 *2800 1750 *2300 1700 12.34

–20.0 ft lb *8,650 5,450 *7,200 4,450 *5,900 3,800 *5,100 3,750 40.83 –7.5 m kg *3750 2600 *3050 2150 *2700 2000 11.24

–25.0 ft lb *7,950 5,600 *6,450 4,650 *5,950 4,400 36.67 –9.0 m kg *3150 2750 *2700 2500 9.80

–30.0 ft lb *6,500 5,900 *5,900 5,600 31.67

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

SLR Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket

6.28 m (20'7") 8.85 m (29'0") 600 mm (24") Single Grouser Shoes 3650 mm (12'0")

2380 mm (7'9") 4450 mm (14'7")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.30

10.5 m kg *1350 *1350 11.66

35.0 ft lb *2,950 *2,950 38.33

9.0 m kg *1300 *1300 12.66

30.0 ft lb *2,850 *2,850 41.67

7.5 m kg *1250 *1250 13.41

25.0 ft lb *2,800 *2,800 44.17

6.0 m kg *1250 *1250 13.97

20.0 ft lb *2,750 *2,750 45.83

4.5 m kg *1300 *1300 14.34

15.0 ft lb *2,800 *2,800 47.50

3.0 m kg *4700 *4700 *6050 *6050 *4450 *4450 *3600 *3600 *1300 *1300 14.55

10.0 ft lb *11,800 *11,800 *12,900 *12,900 *9,550 *9,550 *7,800 *7,800 *2,900 *2,900 48.33

1.5 m kg *6750 *6750 *5250 5100 *4100 3800 *1400 1350 14.60

5.0 ft lb *15,950 *15,950 *11,300 11,000 *8,850 8,150 *3,000 2,900 48.33

0 m kg *2000 *2000 *4650 *4650 *5900 4650 *4550 3500 *1450 1300 14.49 0 ft lb *4,550 *4,550 *10,700 *10,700 *12,700 10,000 *9,800 7,500 *3,200 2,900 47.50

–1.5 m kg *2100 *2100 *2700 *2700 *4650 *4650 *6250 4350 *4850 3300 *1550 1350 14.23 –5.0 ft lb *4,600 *4,600 *6,050 *6,050 *10,500 *10,500 *13,550 9,400 *10,450 7,050 *3,450 2,900 46.67 –3.0 m kg *2850 *2850 *3500 *3500 *5200 *5200 *6400 4250 *5000 3150 *1750 1400 13.79

–10.0 ft lb *6,350 *6,350 *7,850 *7,850 *11,700 *11,700 *13,900 9,100 *10,800 6,800 *3,800 3,050 45.83 –4.5 m kg *3650 *3650 *4400 *4400 *6050 *6050 *6400 4200 *5050 3100 *1950 1500 13.17

–15.0 ft lb *8,150 *8,150 *9,900 *9,900 *13,700 13,650 *13,800 9,050 *10,850 6,700 *4,300 3,250 43.33 –6.0 m kg *4550 *4550 *5400 *5400 *7200 6450 *6150 4250 *4900 3100 *2300 1650 12.34

–20.0 ft lb *10,100 *10,100 *12,150 *12,150 *16,300 13,900 *13,250 9,150 *10,550 6,700 *5,100 3,650 40.83 –7.5 m kg *5500 *5500 *6550 *6550 *7300 6650 *5650 4350 *4550 3200 *2700 1900 11.24

–25.0 ft lb *12,250 *12,250 *14,800 *14,800 *15,650 14,300 *12,150 9,400 *9,750 6,900 *5,950 4,250 36.67 –9.0 m kg *7950 *7950 *6150 *6150 *4850 4550 *3900 3350 *2700 2400 9.80

–30.0 ft lb *17,450 *17,450 *13,100 *13,100 *10,350 9,800 *8,300 7,200 *5,900 5,400 31.67

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

SLR Boom Lift Capacities – Counterweight: 5.4 mt (11,900 lb) – without Bucket (continued)

6.28 m (20'7") 8.85 m (29'0") 600 mm (24") Single Grouser Shoes 3650 mm (12'0")

2380 mm (7'9") 4450 mm (14'7")

9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft 13.5 m/45.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.30

10.5 m kg *2200 *2200 *1350 *1350 11.66

35.0 ft lb *4,850 *4,850 *2,950 *2,950 38.33

9.0 m kg *2200 *2200 *2200 *2200 *1300 *1300 12.66

30.0 ft lb *4,800 *4,800 *4,200 *4,200 *2,850 *2,850 41.67

7.5 m kg *2250 *2250 *2200 2200 *1250 *1250 13.41

25.0 ft lb *4,900 *4,900 *4,850 4,700 *2,800 *2,800 44.17

6.0 m kg *2400 *2400 *2300 2150 *2100 1700 *1250 *1250 13.97

20.0 ft lb *5,200 *5,200 *5,000 4,600 *3,700 3,600 *2,750 *2,750 45.83

4.5 m kg *2800 *2800 *2550 *2550 *2400 2100 *2300 1650 *1300 *1300 14.34

15.0 ft lb *6,050 *6,050 *5,550 *5,550 *5,200 4,450 *5,000 3,500 *2,800 *2,800 47.50

3.0 m kg *3100 *3100 *2800 2500 *2550 2000 *2400 1600 *1300 *1300 14.55

10.0 ft lb *6,750 *6,750 *6,000 5300 *5,500 4250 *5,150 3400 *2,900 *2,900 48.33

1.5 m kg *3450 2950 *3000 2350 *2700 1900 *2450 1550 *1400 1350 14.60

5.0 ft lb *7,400 6,300 *6,450 5,000 *5,800 4,050 *5,350 3,300 *3,000 2,900 48.33

0 m kg *3700 2750 *3200 2200 *2800 1800 2450 1500 *1450 1300 14.49 0 ft lb *8,050 5,900 *6,900 4,700 *6,100 3,850 5,250 3,150 *3,200 2,900 47.50

–1.5 m kg *3950 2600 *3350 2100 2850 1750 2400 1450 *1550 1350 14.23 –5.0 ft lb *8,550 5,550 *7,250 4,500 6,100 3,700 5,150 3,100 *3,450 2,900 46.67 –3.0 m kg *4100 2500 3350 2050 2800 1700 2400 1450 *1750 1400 13.79

–10.0 ft lb *8,850 5,350 7,200 4,350 6,000 3,600 *4,200 3,050 *3,800 3,050 45.83 –4.5 m kg 4100 2450 3300 2000 2800 1650 *1950 1500 13.17

–15.0 ft lb 8,800 5,250 7,150 4,250 6,000 3,600 *4,300 3,250 43.33 –6.0 m kg *4000 2450 3350 2000 *2800 1700 *2300 1650 12.34

–20.0 ft lb *8,650 5,250 7,150 4,300 *5,900 3,650 *5,100 3,650 40.83 –7.5 m kg *3750 2500 *3050 2050 *2700 1900 11.24

–25.0 ft lb *7,950 5,400 *6,450 4,450 *5,950 4,250 36.67 –9.0 m kg *3150 2650 *2700 2400 9.80

–30.0 ft lb *6,500 5,750 *5,900 5,400 31.67

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Bucket Specifications and Compatibility

Linkage

Width Capacity Weight Fill

4.2 mt (9,300 lb)

Counterweight

5.4 mt (11,900 lb)

Counterweight

Reach Boom

Reach Boom

HD

Reach Boom

SLR

Boom mm in m3 yd3 kg lb % R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

HD TRS

SLR8.85

(29'0")

Pin-On (No Quick Coupler) General Duty Capacity B 600 24 0.55 0.72 620 1,366 100

B 750 30 0.75 0.98 717 1,580 100 B 900 36 0.95 1.24 793 1,747 100 B 1050 42 1.16 1.52 848 1,869 100 B 1200 48 1.38 1.80 924 2,038 100 B 1350 54 1.59 2.08 1002 2,210 100

General Duty Capacity – Wide Tip

B 600 24 0.55 0.72 617 1,360 100 B 750 30 0.75 0.98 715 1,576 100 B 900 36 0.95 1.24 791 1,743 100 B 1050 42 1.16 1.52 861 1,899 100 B 1200 48 1.38 1.80 938 2,069 100 B 1350 54 1.59 2.08 1016 2,241 100

Heavy Duty B 600 24 0.46 0.60 647 1,426 100 B 750 30 0.64 0.84 752 1,658 100 B 900 36 0.81 1.06 835 1,841 100 B 1050 42 1.00 1.31 892 1,967 100 B 1200 48 1.19 1.56 975 2,150 100 B 1350 54 1.38 1.81 1060 2,336 100 X X X X X

Heavy Duty Power B 1050 42 0.96 1.26 898 1,980 100 B 1200 48 1.14 1.49 983 2,167 100 X X X X X

Severe Duty B 600 24 0.46 0.61 683 1,506 90 B 750 30 0.64 0.84 795 1,753 90 B 900 36 0.81 1.06 885 1,950 90 B 1050 42 1.00 1.31 948 2,091 90 B 1200 48 1.19 1.56 1038 2,289 90

Severe Duty Power B 900 36 0.79 1.03 853 1,881 90 Clean Up B 1800 72 1.60 2.09 979 2,157 100

B 2000 78 1.76 2.31 1045 2,303 100 X Ditch Cleaning B 1500 60 1.01 1.32 651 1,436 100

B 1800 72 1.24 1.62 739 1,630 100 Ditch Cleaning Tilt B 1500 60 0.90 1.18 948 2,090 100

B 1800 72 1.11 1.45 1063 2,344 100 B 1800 72 1.40 1.83 1105 2,437 100 B 2000 79 1.23 1.61 1132 2,496 100

Tamping B 2200 86 0.72 0.94 868 1,913 100 B 2200 86 0.90 1.18 891 1,965 100

General Duty 312, A 900 36 0.53 0.69 403 888 100 Ditch Cleaning 312, A 1200 48 0.57 0.74 386 851 100

Maximum load with pin-on (payload + bucket) kg 3100 2445 3710 2985 2840 1140 lb 6,834 5,390 8,179 6,581 6,261 2,513

The above loads are in compliance with hydraulic excavator standard EN474-5:2006+A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

TRS = Thumb Ready Stick

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

Bucket Specifications and Compatibility (continued)

Linkage

Width Capacity Weight Fill

4.2 mt (9,300 lb)

Counterweight

5.4 mt (11,900 lb)

Counterweight

Reach Boom

Reach Boom

HD

Reach Boom

SLR

Boom mm in m3 yd3 kg lb % R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

HD TRS

SLR8.85

(29'0")

With Cat Pin Grabber Coupler General Duty Capacity B 600 24 0.55 0.72 620 1,366 100

B 750 30 0.75 0.98 717 1,580 100 B 900 36 0.95 1.24 793 1,747 100 B 1050 42 1.16 1.52 848 1,869 100 B 1200 48 1.38 1.80 924 2,038 100 B 1350 54 1.59 2.08 1002 2,210 100 X

General Duty Capacity – Wide Tip

B 600 24 0.55 0.72 617 1,360 100 B 750 30 0.75 0.98 715 1,576 100 B 900 36 0.95 1.24 791 1,743 100 B 1050 42 1.16 1.52 861 1,899 100 B 1200 48 1.38 1.80 938 2,069 100 X B 1350 54 1.59 2.08 1016 2,241 100 X

Heavy Duty B 600 24 0.46 0.60 647 1,426 100 B 750 30 0.64 0.84 752 1,658 100 B 900 36 0.81 1.06 835 1,841 100 B 1050 42 1.00 1.31 892 1,967 100 B 1200 48 1.19 1.56 975 2,150 100 B 1350 54 1.38 1.81 1060 2,336 100 X

Heavy Duty Power B 1050 42 0.96 1.26 898 1,980 100 B 1200 48 1.14 1.49 983 2,167 100

Heavy Duty Pin Grabber Performance

B 600 24 0.44 0.57 682 1,503 100 B 750 30 0.60 0.79 787 1,735 100 B 900 36 0.76 1.00 876 1,931 100 B 1050 42 0.93 1.22 940 2,072 100 B 1200 48 1.11 1.45 1031 2,272 100 B 1350 54 1.28 1.67 1122 2,474 100 X

Severe Duty B 600 24 0.46 0.61 683 1,506 90 B 750 30 0.64 0.84 795 1,753 90 B 900 36 0.81 1.06 885 1,950 90 B 1050 42 1.00 1.31 948 2,091 90 B 1200 48 1.19 1.56 1038 2,289 90 B 900 36 0.79 1.03 853 1,881 90

Clean Up B 1800 72 1.60 2.09 979 2,157 100 X B 2000 78 1.76 2.31 1045 2,303 100 X

Ditch Cleaning B 1500 60 1.01 1.32 651 1,436 100 B 1800 72 1.24 1.62 739 1,630 100

Ditch Cleaning Tilt B 1500 60 0.90 1.18 948 2,090 100 B 1800 72 1.11 1.45 1063 2,344 100 B 1800 72 1.40 1.83 1105 2,437 100 B 2000 79 1.23 1.61 1132 2,496 100 X

Maximum load with coupler (payload + bucket) kg 2779 2112 3401 2660 3140 940 lb 6,127 4,656 7,498 5,865 6,924 2,073

The above loads are in compliance with hydraulic excavator standard EN474-5:2006+A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

TRS = Thumb Ready Stick

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or

Bucket Specifications and Compatibility (continued)

Linkage

Width Capacity Weight Fill

4.2 mt (9,300 lb)

Counterweight

5.4 mt (11,900 lb)

Counterweight Reach Boom

Reach Boom

HD Reach Boom mm in m3 yd3 kg lb % R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

HD TRS

Pin-On, TRS18 S70 Heavy Duty – Grading B 1600 63 1.00 1.31 691 1,523 100

B 1800 71 1.10 1.44 758 1,671 100 Heavy Duty – Digging B 1150 45 0.90 1.18 778 1,715 100

B 1250 49 1.10 1.44 850 1,874 100 X Heavy Duty – Trenching B 600 24 0.55 0.72 460 1,014 100

Maximum load with pin-on (payload + bucket) kg 2519 1852 3141 2400 2880 lb 5,553 4,083 6,925 5,291 6,350

With S70, TRS18 S70 Heavy Duty – Grading B 1600 63 1.00 1.31 691 1,523 100 X

B 1800 71 1.10 1.44 758 1,671 100 X Heavy Duty – Digging B 1150 45 0.90 1.18 778 1,715 100 X

B 1250 49 1.10 1.44 850 1,874 100 X Heavy Duty – Trenching B 600 24 0.55 0.72 460 1,014 100

Maximum load with pin-on (payload + bucket) kg 2264 1597 2886 2145 2625 lb 4,991 3,520 6,362 4,729 5,787

The above loads are in compliance with hydraulic excavator standard EN474-5:2006+A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or

PIN-ON ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 5.4 mt (11,900 lb) Boom Type Reach Reach HD Reach

Stick Length R2.9 (9'6")

R3.9 (12'10")

R2.9 (9'6")

R3.9 (12'10")

R2.9

(9'6") TRS

Hydraulic Hammers H115 GC S ü ü ü ü ü

H120 GC ü ü ü ü ü

H120 GC S ü ü ü ü ü

H120 S ü ü ü ü ü

H130 GC ü† ü† ü

H130 GC S ü† ü† ü

H130 S ü† ü ü† ü ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü ü ü ü

MP318 Demolition Jaw ü ü ü ü ü

MP318 Pulverizer Jaw ü ü ü ü

MP318 Shear Jaw ü ü ü ü ü

MP318 Universal Jaw ü ü ü ü ü

MP324 Concrete Cutter Jaw ü ü ü

MP324 Demolition Jaw ü ü ü

MP324 Shear Jaw ü ü ü

MP324 Tank Shear Jaw ü* ü ü

MP324 Universal Jaw ü* ü ü

Demolition and Sorting Grapples G318 ü ü ü ü ü

G318 WH-800 ü ü ü ü ü

G318 WH-1100 ü ü ü

G324 ü* ü ü

G324 WH-1500 ü* ü ü

Mobile Scrap and Demolition Shears S3025 Flat Top ü ü ü

Pulverizers P218 Secondary Pulverizer ü ü ü

P224 Secondary Pulverizer

P318 Primary Pulverizer ü ü ü

P324 Primary Pulverizer ü* ü

Compactors (Vibratory Plate) CVP110 ü ü ü ü ü

Rotary Cutters RC20 ü ü ü ü ü

Mulchers HM4015 ü ü ü ü ü

HM4018 ü ü ü ü ü

Orange Peel Grapples GSH420-500

GSH420-600

GSH420-750

GSH425-750

GSH425-950

GSH425-1150

GSH520-500

GSH520-600

GSH520-750

GSH525-750

GSH525-950

GSH525-1150

Demolition and Sorting Grapple: WH – Waste Handling shells

TRS = Thumb Ready

(continued on next page)

Attachments Offering Guide Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

Match Working range front only Allowed usage on machine less than 50% No Match 1800 kg/m3

(3,000 lb/yd3) 1200 kg/m3 (2,000 lb/yd3)ü * †

CAT PIN GRABBER COUPLER ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 5.4 mt (11,900 lb) Boom Type Reach Reach HD Reach Stick Length R2.9 (9'6") R3.9 (12'10") R2.9 (9'6") R3.9 (12'10") R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü ü ü ü

H120 GC ü† ü† ü† ü† ü

H120 GC S ü† ü† ü† ü† ü

H120 S ü† ü† ü† ü† ü

H130 GC ü† ü† ü

H130 GC S…