AEXQ3988_325__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Blade Dimensions

Working Ranges

Reach Boom Lift Capacities:

Counterweight: 8.3 mt (18,300 lb)

Counterweight: 6.7 mt (14,770 lb)

Counterweight: 4.9 mt (10,800 lb)

Variable Angle Boom Lift Capacities:

Counterweight: 6.7 mt (14,800 lb)

Counterweight: 4.9 mt (10,800 lb)

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment

Dealer Installed Kits and Attachments 325 Environmental Declaration

Engine

Engine Model Cat® C4.4

Net Power

ISO 9249 128.5 kW 172 hp

ISO 9249 (DIN) 175 hp (metric)

Engine Power

ISO 14396 129.4 kW 174 hp

ISO 14396 (DIN) 176 hp (metric)

Bore 105 mm 4 in

Stroke 127 mm 5 in

Displacement 4.4 L 269 in3

Biodiesel capability Up to B20(1)�

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

• Recommended for use up to 4500 m (14,760 ft) altitude with engine power derate above 3000 m (9,840 ft).

• Advertised power is tested per the specified standard in effect at the time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

• Engine speed at 2,200 rpm.

(1)�Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

20% biodiesel FAME (fatty acid methyl ester)* �100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 11.1 rpm

Maximum Swing Torque 82 kN·m 60,480 lbf·ft

Weights

Operating Weight 28 400 kg 62,600 lb

• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, Heavy Duty (HD) 1.19 m3 (1.56 yd3) bucket, 790 mm (31") HD triple grouser shoes and 8.3 mt (18,300 lb) counterweight.

Operating Weight 26 700 kg 58,900 lb

• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, General Duty (GD) 1.30 m3 (1.7 yd3) bucket, 790 mm (31") HD triple grouser shoes and 6.7 mt (14,770 lb) counterweight.

Operating Weight 26 200 kg 57,800 lb

• Long undercarriage, Reach boom, R2.9B1 (9'6") stick, HD 1.19 m3 (1.56 yd3) bucket, 600 mm (24") HD triple grouser shoes and

4.9 mt (10,800 lb) counterweight + blade.

Track

Optional Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 790 mm 31 in

Number of Shoes (each side) 49

Number of Track Rollers (each side) 8

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.7 km/h 3.5 mph

Maximum Drawbar Pull 201 kN 45,232 lbf

Hydraulic System

Main System – Maximum Flow – Implement

429 L/min 113 gal/min

Maximum Pressure – Equipment – Implement

35 000 kPa 5,075 psi

Maximum Pressure – Equipment – Heavy Lift Mode/Auto Dig Boost

38 000 kPa 5,510 psi

Maximum Pressure – Travel 35,000 kPa 5,075 psi

Maximum Pressure – Swing 27 500 kPa 3,988 psi

Auxiliary Pump (optional) – Maximum Flow

51 L/min 13 gal/min

Auxiliary Pump (optional) – Maximum Pressure

14 000 kPa 2,031 psi

Auxiliary Pump for 2980 mm (9'9") Blade (optional) – Maximum Flow

73 L/min 19 gal/min

Auxiliary Pump for 3170 mm (10'5") Blade (optional) – Maximum Flow

92 L/min 24 gal/min

Auxiliary Pump for Blade (optional) – Maximum Pressure

24 500 kPa 3,553 psi

Boom Cylinder – Bore 125 mm 5 in

Boom Cylinder – Stroke 1410 mm 56 in

Stick Cylinder – Bore 140 mm 6 in

Stick Cylinder – Stroke 1504 mm 59 in

Bucket Cylinder – Bore 120 mm 5 in

Bucket Cylinder – Stroke 1104 mm 43 in

Service Refill Capacities

Fuel Tank Capacity 313 L 82.7 gal

Cooling System 11.8 L 3.1 gal

Engine Oil (with filter) 15 L 4.0 gal

Swing Drive 5.5 L 1.5 gal

Final Drive (each) 4.5 L 1.2 gal

Hydraulic System (including tank) 230 L 60.8 gal

Hydraulic Tank (including suction pipe)

111 L 29.3 gal

Diesel Exhaust Fluid (DEF) Tank 26 L 6.9 gal

325 Hydraulic Excavator Specifications

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab/Operator Protective Guards (OPG) (optional)

ISO 10262:1998 Level II

Sound Performance

ISO 6395:2008 (external) 97 dB(A)

ISO 6396:2008 (inside cab) 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

Operating Weights and Ground Pressures

600 mm (24 in) HD Triple Grouser Shoes

790 mm (31 in) HD Triple Grouser Shoes

Weight Ground Pressure Weight Ground Pressure Base Frame with Track Rollers and Carrier Rollers

Base Machine with 8.3 mt (18,300 lb) Counterweight and Long Undercarriage Reach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + Auxiliary (AUX) Lines

27 800 kg (61,300 lb)

57.8 kPa (8.4 psi)

28 400 kg (62,600 lb)

44.9 kPa (6.5 psi)

Base Machine with 6.7 mt (14,770 lb) Counterweight and Long Undercarriage Reach Boom + R2.9B1 (9'6") Stick + GD 1.30 m3 (1.7 yd3) Bucket + AUX Lines

26 000 kg (57,300 lb)

54.1 kPa (7.8 psi)

26 700 kg (58,900 lb)

42.2 kPa (6.1 psi)

Base Machine with 4.9 mt (10,800 lb) Counterweight and Long Undercarriage Reach Boom + R2.9B1 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket + Blade + AUX Lines

26 200 kg (57,800 lb)

54.5 kPa (7.9 psi)

26 900 kg (59,300 lb)

42.5 kPa (6.2 psi)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine Weight (with upper frame, long undercarriage, counterweight, two boom cylinders – does not include boom, stick, bucket, blade, stick cylinder, bucket cylinder, tracks, fuel tank and operator).

With 8.3 mt (18,300 lb) Counterweight (for use with Reach boom) 20 250 44,640

With 6.7 mt (14,800 lb) Counterweight (for use with Reach boom) 18 650 41,110

With 6.7 mt (14,800 lb) Counterweight (for use with Variable Angle boom) 18 580 40,960

With 4.9 mt (10,800 lb) Counterweight (for use with Reach boom and blade) 17 490 38,540

With 4.9 mt (10,800 lb) Counterweight (for use with Variable Angle boom and blade) 17 850 39,340

Track Shoes:

600 mm (24") HD Triple Grouser Track Shoes 3190 7,040

790 mm (31") HD Triple Grouser Track Shoes with Step Extension 3860 8,500

Two Boom Cylinders (for Reach boom) 420 940

Two Boom Cylinders with Lowering Control Valve (for Reach boom) 440 960

Two Boom Cylinders (for Variable Angle [VA] boom) 360 790

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 310 690

Blades (including lines, cylinders, frame modifications):

2980 mm (9'9") Blade (for use with 4.9 mt [10,800 lb] counterweight and 600 mm [24"] track shoes) 1150 2,540

3170 mm (10'5") Blade (for use with 4.9 mt [10,800 lb] counterweight and 790 mm [31"] track shoes) 1190 2,620

Counterweights:

4.9 mt (10,800 lb) Counterweight 4900 10,800

6.7 mt (14,770 lb) Counterweight 6700 14,770

8.3 mt (18,300 lb) Counterweight 8300 18,300

Swing Frames:

Swing Frame with Standard Base Frame and SD Track Rollers for 4.9 mt (10,800 lb) Counterweight – for use with Blade

7050 15,530

Swing Frame with Standard Base Frame and SD Track Rollers for 6.7 mt (14,770 lb) Counterweight – without Blade

6960 15,350

Swing Frame with Standard Base Frame and SD Track Rollers for 8.3 mt (18,300 lb) Counterweight – without Blade

6960 15,350

Undercarriages:

Long Undercarriage without Blade 4560 10,050

Long Undercarriage for use with Blade 5120 11,290

Booms (including lines, pins, stick cylinder):

Reach Boom 5.7 m (18'8") 1720 3,790

Variable Angle Boom (2.7 m [8'10"] Stub + 3.3 m [10'10"] Fore) 2870 6,320

AUX lines High Pressure + Quick Coupler (HP + QC) (for use with Reach boom only) 130 290

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R2.9B1 (9'6") 1030 2,270

Thumb Ready Stick R2.9B1 (9'6") 1160 2,570

AUX lines (HP + QC) 60 130

Buckets (without linkage, with tips and side cutters):

1.19 m3 (1.56 yd3) HD 1040 2,290

1.30 m3 (1.7 yd3) GD 880 1,950

Quick Couplers:

Pin Grabber QC B without Pins 430 940

CW QC B without Pins 250 550

Refer to pages 28-29 for a complete list of bucket options.

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Options Reach Boom Variable Angle Boom

5.7 m (18'8") 2.7 m/3.3 m (8'10"/10'10")

Stick Option Reach Stick Reach Stick R2.9B1 (9'6") R2.9B1 (9'6")

1 Machine Height:

Top of Cab Height 3080 mm 10'1" 3080 mm 10'1" Top of GNSS Antenna Height (if installed) 2620 mm 8'7" 2620 mm 8'7" Top of OPG Height 3220 mm 10'7" 3220 mm 10'7" Shipping Height without OPG 3210 mm 10'6" 3210 mm 10'6" Handrail Height 3190 mm 10'5" 3190 mm 10'5" With Boom/Stick/Bucket Installed 3170 mm 10'5" 3040 mm 10'0" With Boom/Stick Installed 2990 mm 9'10" 3040 mm 10'0" With Boom Installed 2600 mm 8'6" 2600 mm 8'6" With Boom/Stick/Bucket Installed (with auxiliary lines) 3200 mm 10'6" 3190 mm 10'6" With Boom/Stick Installed (with auxiliary lines) 3110 mm 10'2" 3040 mm 10'0" With Boom Installed (with auxiliary lines) 2790 mm 9'2" 3040 mm 10'0"

2 Machine Length:

With Boom/Stick/Bucket Installed (with/without auxiliary lines) 8890 mm 29'2" 9180 mm 30'1" With Boom/Stick Installed (with/without auxiliary lines) 8850 mm 29'0" 8910 mm 29'3" With Boom Installed (with/without auxiliary lines) 7780 mm 25'6" 8060 mm 26'5" With Blade Installed (with auxiliary lines) 9590 mm 31'6" 9870 mm 32'5"

3 Upperframe Width 2990 mm 9'10" 2990 mm 9'10" 4 Tail Swing Radius:

4.9 mt (10,800 lb) Counterweight 1780 mm 5'10" 1780 mm 5'10"

6.7 mt (14,770 lb) Counterweight 1810 mm 5'11" 1810 mm 5'11"

8.3 mt (18,300 lb) Counterweight 1810 mm 5'11" 1810 mm 5'11"

5 Counterweight Clearance 1020 mm 3'4" 1020 mm 3'4" 6 Ground Clearance 440 mm 1'5" 440 mm 1'5" 7 Length to Center of Rollers 3650 mm 12'0" 3650 mm 12'0" 8 Track Length 4460 mm 14'7" 4460 mm 14'7" 9 Track Gauge 2380 mm 7'10" 2380 mm 7'10"

10 Undercarriage Width:

600 mm (24") Shoes 2980 mm 9'9" 2980 mm 9'9" 790 mm (31") Shoes 3170 mm 10'5" 3170 mm 10'5"

Bucket Type HD HD Bucket Capacity 1.19 m3 1.56 yd3 1.19 m3 1.56 yd3 Bucket Tip Radius 1570 mm 5'2" 1570 mm 5'2"

Blade Dimensions All dimensions are approximate.

1 2

Blade Options 2980 mm 3170 mm (9'8") (10'4")

Recommended Track Shoe Width 600 mm 790 mm (24") (31")

1 Blade Moldboard Height 696 mm 2'3" 696 mm 2'3"

2 Blade Maximum Cutting Edge Rise 585 mm 1'11" 585 mm 1'11"

3 Blade Minimum Cutting Edge Depth 467 mm 1'6" 467 mm 1'6"

4 Blade Edge from Machine Center 2930 mm 9'7" 2930 mm 9'7"

5 Ramp Angle 28.8 degrees 28.8 degrees

Blade Down Force (ground level) 151.4 kN 34.0 kLbf 151.4 kN 34.0 kLbf

Blade Down Force (maximum) 170.6 kLbf 38.4 kN 170.6 kLbf 38.4 kN

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

01234567891011 –1 Meters

Meters

R2.9B1 (9'6")

05101520253035 Feet

Feet

0123456789101112 –1 Meters

Meters

R2.9B1 (9'6")

05101520253035 Feet

Feet

Boom Options Reach Boom Variable Angle Boom

5.7 m (18'8") 2.7 m/3.3 m (8'10"/10'10")

Stick Option Reach Stick Reach Stick R2.9B1 (9'6") R2.9B1 (9'6")

1 Maximum Digging Depth 6700 mm 22'0" 6520 mm 21'5"

2 Maximum Reach at Ground Line 9780 mm 32'1" 10 130 mm 33'3"

3 Maximum Cutting Height 10 970 mm 36'0" 11 680 mm 38'4"

4 Maximum Loading Height 7900 mm 25'9" 8540 mm 28'0"

5 Minimum Loading Height 2980 mm 9'8" 3420 mm 11'3"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 6520 mm 21'4" 6420 mm 21'1"

7 Maximum Vertical Wall Digging Depth 4880 mm 16'0" 5150 mm 16'11"

8 Minimum Front Swing Radius 2280 mm 7'6" — —

Bucket Digging Force (ISO) 150 kN 33,811 lbf 150 kN 33,720 lbf

Stick Digging Force (ISO) 106 kN 23,911 lbf 108 kN 24,280 lbf

Bucket Digging Force (ISO) – Auto Dig Boost 163 kN 36,610 lbf 163 kN 36,610 lbf

Stick Digging Force (ISO) – Auto Dig Boost 115 kN 25,870 lbf 117 kN 26,360 lbf

Bucket Type HD HD

Bucket Capacity 1.19 m3 1.56 yd3 1.19 m3 1.56 yd3

Bucket Tip Radius 1570 mm 5'2" 1570 mm 5'2"

Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 *6400 *3950 *3950 7.35

20.0 ft lb *14,500 *14,500 *14,050 13,800 *8,700 *8,700 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 6250 *6300 4500 *3900 *3900 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 13,450 *12,700 9,600 *8,550 *8,550 26.67

3.0 m kg *10 250 9050 *8000 6000 6800 4350 *4000 3750 8.33

10.0 ft lb *22,100 19,550 *17,350 12,950 14,650 9,400 *8,800 8,250 27.50

1.5 m kg *12 050 8600 *8900 5800 6700 4250 *4250 3650 8.39

5.0 ft lb *26,050 18,500 *19,300 12,450 14,400 9,150 *9,350 8,050 27.50

0 m kg *7450 *7450 *12 850 8350 9100 5650 6600 4200 *4750 3750 8.17 0 ft lb *17,000 *17,000 *27,800 17,950 19,600 12,100 14,200 9,000 *10,450 8,250 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 *12 600 8300 9050 5550 6600 4150 *5650 4050 7.65 –5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 17,800 19,450 12,000 *12,700 9,000 *12,400 8,950 25.00 –3.0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 8350 *8450 5600 *7100 4850 6.76

–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 17,950 *18,150 12,100 *15,650 10,700 22.50 –4.5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5.32

–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7.35

20.0 ft lb *14,350 *14,350 *13,850 13,650 *8,650 *8,650 24.17

4.5 m kg *10 600 *10 600 *8100 *8100 *6950 6200 *6250 4400 *3850 *3850 8.00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,300 *12,650 9,450 *8,500 *8,500 26.67

3.0 m kg *10 150 8950 *7900 5950 6750 4300 *3950 3700 8.33

10.0 ft lb *21,850 19,350 *17,100 12,750 14,500 9,250 *8,700 8,100 27.50

1.5 m kg *11 950 8450 *8800 5700 6600 4200 *4250 3600 8.39

5.0 ft lb *25,750 18,250 *19,050 12,250 14,250 9,000 *9,300 7,850 27.50

0 m kg *7400 *7400 *12 700 8200 9000 5550 6500 4100 *4700 3650 8.17 0 ft lb *16,950 *16,950 *27,500 17,650 19,350 11,900 14,050 8,800 *10,350 8,050 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 *12 450 8150 8950 5450 6500 4100 *5600 4000 7.65 –5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 17,550 19,200 11,750 *12,650 8,800 *12,300 8,800 25.00 –3.0 m kg *12 900 *12 900 *15 600 *15 600 *11 250 8250 *8350 5500 *7000 4750 6.76

–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 17,700 *17,950 11,900 *15,400 10,500 22.50 –4.5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5.32

–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

TRS = Thumb Ready Stick

Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 *6400 *3950 *3950 7.35

20.0 ft lb *14,500 *14,500 *14,050 *14,050 *8,700 *8,700 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 6400 *6300 4600 *3900 *3900 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 13,750 *12,700 9,850 *8,550 *8,550 26.67

3.0 m kg *10 250 9250 *8000 6150 *6900 4500 *4000 3850 8.33

10.0 ft lb *22,100 19,950 *17,350 13,250 15,000 9,600 *8,800 8,450 27.50

1.5 m kg *12 050 8800 *8900 5900 6850 4350 *4250 3750 8.39

5.0 ft lb *26,050 18,950 *19,300 12,750 14,750 9,400 *9,350 8,200 27.50

0 m kg *7450 *7450 *12 850 8550 9300 5750 6750 4300 *4750 3850 8.17 0 ft lb *17,000 *17,000 *27,800 18,400 20,050 12,400 14,550 9,200 *10,450 8,450 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 *12 600 8450 9250 5700 6750 4250 *5650 4150 7.65 –5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 18,250 19,900 12,250 *12,700 9,200 *12,400 9,200 25.00 –3.0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 8550 *8450 5750 *7100 4950 6.76

–10.0 ft lb *28,950 *28,950 *34,150 *34,150 *24,600 18,400 *18,150 12,400 *15,650 10,950 22.50 –4.5 m kg *11 800 *11 800 *8600 *8600 *6850 *6850 5.32

–15.0 ft lb *25,100 *25,100 *18,100 *18,100 *14,950 *14,950 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 8.3 mt (18,300 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 *6350 *3900 *3900 7.35

20.0 ft lb *14,350 *14,350 *13,850 *13,850 *8,650 *8,650 24.17

4.5 m kg *10 600 *10 600 *8100 *8100 *6950 6300 *6250 4500 *3850 *3850 8.00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 13,600 *12,650 9,700 *8,500 *8,500 26.67

3.0 m kg *10 150 9150 *7900 6050 *6800 4400 *3950 3750 8.33

10.0 ft lb *21,850 19,750 *17,100 13,050 *14,800 9,450 *8,700 8,300 27.50

1.5 m kg *11 950 8650 *8800 5800 6750 4300 *4250 3650 8.39

5.0 ft lb *25,750 18,700 *19,050 12,550 14,550 9,200 *9,300 8,050 27.50

0 m kg *7400 *7400 *12 700 8400 9200 5650 6700 4200 *4700 3750 8.17 0 ft lb *16,950 *16,950 *27,500 18,100 19,850 12,200 14,400 9,050 *10,350 8,250 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 *12 450 8350 9150 5600 6650 4200 *5600 4100 7.65 –5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 17,950 19,700 12,050 *12,650 9,050 *12,300 9,000 25.00 –3.0 m kg *12 900 *12 900 *15 600 *15 600 *11 250 8400 *8350 5650 *7000 4850 6.76

–10.0 ft lb *28,900 *28,900 *33,750 *33,750 *24,300 18,100 *17,950 12,200 *15,400 10,800 22.50 –4.5 m kg *11 600 *11 600 *8450 *8450 *6750 *6750 5.32

–15.0 ft lb *24,750 *24,750 *17,850 *17,850 *14,700 *14,700 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83

6.0 m kg *6650 *6650 *6400 5700 *3900 *3900 7.35

20.0 ft lb *14,500 *14,500 *14,000 12,300 *8,650 *8,650 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 6250 3950 *3900 3550 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,650 8,450 *8,500 7,850 26.67

3.0 m kg *10 300 8050 *8000 5350 6100 3850 *4000 3300 8.33

10.0 ft lb *22,150 17,400 *17,350 11,450 13,150 8,300 *8,750 7,250 27.50

1.5 m kg *12 100 7600 8350 5100 6000 3750 *4250 3200 8.39

5.0 ft lb *26,100 16,400 17,950 11,000 12,900 8,050 *9,300 7,000 27.50

0 m kg *7400 *7400 *12 850 7350 8200 4950 5900 3650 *4750 3300 8.17 0 ft lb *16,950 *16,950 27,650 15,850 17,600 10,650 12,750 7,900 *10,400 7,200 27.50

–1.5 m kg *7750 *7750 *12 350 *12 350 *12 650 7300 8100 4900 5900 3650 *5600 3550 7.65 –5.0 ft lb *17,250 *17,250 *28,050 *28,050 *27,400 15,700 17,450 10,500 *12,700 7,850 *12,350 7,850 25.00 –3.0 m kg *12 900 *12 900 *15 800 14 200 *11 400 7350 8150 4950 6900 4250 6.76

–10.0 ft lb *28,900 *28,900 *34,250 30,400 *24,650 15,850 17,550 10,650 15,300 9,400 22.50 –4.5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5.32

–15.0 ft lb *25,200 *25,200 *18,150 16,350 *15,000 13,650 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 6.7 mt (14,770 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Long Undercarriage)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6150 *6150 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,600 *13,600 *10,100 *10,100 *9,300 *9,300 20.83

6.0 m kg *6650 *6650 *6400 5850 *3900 *3900 7.35

20.0 ft lb *14,500 *14,500 *14,000 12,550 *8,650 *8,650 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 5700 *6300 4050 *3900 3650 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,250 *12,650 8,700 *8,500 8,050 26.67

3.0 m kg *10 300 8250 *8000 5450 6300 3950 *4000 3400 8.33

10.0 ft lb *22,150 17,800 *17,350 11,750 13,500 8,500 *8,750 7,450 27.50

1.5 m kg *12 100 7800 8550 5250 6150 3850 *4250 3300 8.39

5.0 ft lb *26,100 16,800 18,450 11,300 13,250 8,250 *9,300 7,200 27.50

0 m kg *7400 *7400 *12 850 7550 8400 5100 6100 3750 *4750 3350 8.17 0 ft lb *16,950 *16,950 *27,850 16,250 18,050 10,950 13,050 8,100 *10,400 7,400 27.50

–1.5 m kg *7750 *7750 *12 350 *12 350 *12 650 7500 8350 5000 6050 3750 *5600 3650 7.65 –5.0 ft lb *17,250 *17,250 *28,050 *28,050 *27,400 16,100 17,900 10,800 *12,700 8,100 *12,350 8,050 25.00 –3.0 m kg *12 900 *12 900 *15 800 14 550 *11 400 7550 8400 5050 7100 4350 6.76

–10.0 ft lb *28,900 *28,900 *34,250 31,200 *24,650 16,250 18,050 10,900 *15,650 9,650 22.50 –4.5 m kg *11 800 *11 800 *8600 7800 *6850 6200 5.32

–15.0 ft lb *25,200 *25,200 *18,150 16,800 *15,000 14,000 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 5300 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 5250 *3950 3750 7.35

20.0 ft lb *14,500 *14,500 *14,050 11,300 *8,700 8,400 24.17

4.5 m kg *10 650 *10 650 *8150 7950 *7050 5100 5450 3600 *3900 3250 8.00

15.0 ft lb *22,700 *22,700 *17,600 17,100 *15,300 10,950 11,700 7,700 *8,550 7,150 26.67

3.0 m kg *10 250 7400 7550 4850 5350 3500 *4000 3000 8.33

10.0 ft lb *22,100 15,900 16,200 10,450 11,450 7,500 *8,800 6,550 27.50

1.5 m kg 11 500 6900 7250 4650 5200 3400 *4250 2900 8.39

5.0 ft lb 24,700 14,900 15,650 9,950 11,200 7,300 *9,350 6,350 27.50

0 m kg *7450 *7450 11 200 6650 7100 4500 5100 3300 4550 2950 8.17 0 ft lb *17,000 *17,000 24,000 14,350 15,250 9,650 11,000 7,100 10,000 6,500 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 11 100 6600 7000 4400 5100 3300 5000 3200 7.65 –5.0 ft lb *17,300 *17,300 *28,100 27,150 23,850 14,200 15,100 9,500 11,000 7,100 11,000 7,100 25.00 –3.0 m kg *12 900 *12 900 *15 750 12 900 11 200 6650 7100 4450 6000 3850 6.76

–10.0 ft lb *28,950 *28,950 *34,150 27,600 24,000 14,350 15,200 9,600 13,300 8,500 22.50 –4.5 m kg *11 800 *11 800 *8600 6900 *6850 5500 5.32

–15.0 ft lb *25,100 *25,100 *18,100 14,900 *14,950 12,400 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Blade – Down)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 5700 *3950 *3950 7.35

20.0 ft lb *14,500 *14,500 *14,050 12,300 *8,700 *8,700 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 5550 *6300 3900 *3900 3550 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 11,950 *12,700 8,400 *8,550 7,800 26.67

3.0 m kg *10 250 8100 *8000 5300 *6900 3800 *4000 3250 8.33

10.0 ft lb *22,100 17,500 *17,350 11,450 *15,000 8,200 *8,800 7,150 27.50

1.5 m kg *12 050 7650 *8900 5100 *7300 3700 *4250 3150 8.39

5.0 ft lb *26,050 16,400 *19,300 10,900 *15,900 7,950 *9,350 6,950 27.50

0 m kg *7450 *7450 *12 850 7350 *9450 4900 *7550 3650 *4750 3250 8.17 0 ft lb *17,000 *17,000 *27,800 15,850 *20,500 10,600 *16,300 7,800 1*0,450 7,100 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 *12 600 7300 *9400 4850 *7250 3600 *5650 3550 7.65 –5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 15,700 *20,350 10,450 *12,700 7,800 *12,400 7,750 25.00 –3.0 m kg *12 900 *12 900 *15 750 14 550 *11 400 7400 *8450 4900 *7100 4200 6.76

–10.0 ft lb *28,950 *28,950 *34,150 31,150 *24,600 15,850 *18,150 10,550 *15,650 9,300 22.50 –4.5 m kg *11 800 *11 800 *8600 7600 *6850 6050 5.32

–15.0 ft lb *25,100 *25,100 *18,100 16,400 *14,950 13,600 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 5200 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 5200 *3900 3700 7.35

20.0 ft lb *14,350 *14,350 *13,850 11,150 *8,650 8,250 24.17

4.5 m kg *10 600 *10 600 *8100 7850 *6950 5050 5400 3550 *3850 3150 8.00

15.0 ft lb *22,500 *22,500 *17,450 16,950 *15,100 10,800 11,550 7,550 *8,500 7,000 26.67

3.0 m kg *10 150 7300 7450 4800 5250 3450 *3950 2900 8.33

10.0 ft lb *21,850 15,700 16,000 10,300 11,300 7,350 *8,700 6,400 27.50

1.5 m kg 11 400 6800 7200 4550 5150 3300 *4250 2800 8.39

5.0 ft lb 24,400 14,600 15,450 9,750 11,050 7,100 *9,300 6,150 27.50

0 m kg *7400 *7400 11 050 6550 7000 4400 5050 3250 4450 2900 8.17 0 ft lb *16,950 *16,950 23,700 14,050 15,050 9,400 10,850 6,950 9,850 6,300 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 11 000 6450 6900 4300 5050 3200 4900 3150 7.65 –5.0 ft lb *17,200 *17,200 *28,050 26,700 23,500 13,900 14,900 9,300 10,800 6,900 10,800 6,900 25.00 –3.0 m kg *12 900 *12 900 *15 600 12 700 11 050 6550 7000 4350 5900 3750 6.76

–10.0 ft lb *28,900 *28,900 *33,750 27,150 23,750 14,050 15,000 9,400 13,100 8,300 22.50 –4.5 m kg *11 600 *11 600 *8450 6800 *6750 5400 5.32

–15.0 ft lb *24,750 *24,750 *17,850 14,650 *14,700 12,200 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 600 mm �(24") HD Triple Grouser Shoes (Blade – Down)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 5650 *3900 *3900 7.35

20.0 ft lb *14,350 *14,350 *13,850 12,150 *8,650 *8,650 24.17

4.5 m kg *10 600 *10 600 *8100 *8100 *6950 5500 *6250 3850 *3850 3450 8.00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 11,800 *12,650 8,250 *8,500 7,650 26.67

3.0 m kg *10 150 8000 *7900 5250 *6800 3750 *3950 3200 8.33

10.0 ft lb *21,850 17,250 *17,100 11,250 *14,800 8,050 *8,700 7,000 27.50

1.5 m kg *11 950 7500 *8800 5000 *7200 3650 *4250 3100 8.39

5.0 ft lb *25,750 16,150 *19,050 10,700 *15,650 7,800 *9,300 6,750 27.50

0 m kg *7400 *7400 *12 700 7250 *9350 4800 *7450 3550 *4700 3150 8.17 0 ft lb *16,950 *16,950 *27,500 15,550 *20,250 10,350 *16,100 7,600 *10,350 6,950 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 *12 450 7150 *9300 4750 *7150 3550 *5600 3450 7.65 –5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 15,400 *20,100 10,200 *12,650 7,600 *12,300 7,600 25.00 –3.0 m kg *12 900 *12 900 *15 600 14 350 *11 250 7250 *8350 4800 *7000 4150 6.76

–10.0 ft lb *28,900 *28,900 *33,750 30,700 *24,300 15,600 *17,950 10,350 *15,400 9,150 22.50 –4.5 m kg *11 600 *11 600 *8450 7500 *6750 5950 5.32

–15.0 ft lb *24,750 *24,750 *17,850 16,200 *14,700 13,400 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 5400 *3950 3900 7.35

20.0 ft lb *14,500 *14,500 *14,050 11,600 *8,700 8,650 24.17

4.5 m kg *10 650 *10 650 *8150 8150 *7050 5250 5600 3700 *3900 3350 8.00

15.0 ft lb *22,700 *22,700 *17,600 17,500 *15,300 11,250 12,000 7,950 *8,550 7,350 26.67

3.0 m kg *10 250 7600 7750 5000 5500 3600 *4000 3050 8.33

10.0 ft lb *22,100 16,350 16,650 10,750 11,800 7,750 *8,800 6,750 27.50

1.5 m kg 11 850 7100 7500 4750 5350 3500 *4250 3000 8.39

5.0 ft lb 25,400 15,350 16,100 10,300 11,550 7,500 *9,350 6,550 27.50

0 m kg *7450 *7450 11 550 6850 7300 4600 5300 3400 4700 3050 8.17 0 ft lb *17,000 *17,000 24,700 14,800 15,700 9,950 11,350 7,350 10,300 6,700 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 11 450 6800 7250 4550 5250 3400 5150 3350 7.65 –5.0 ft lb *17,300 *17,300 *28,100 27,950 24,550 14,650 15,550 9,800 11,350 7,350 11,300 7,300 25.00 –3.0 m kg *12 900 *12 900 *15 750 13 250 *11 400 6850 7300 4600 6150 3950 6.76

–10.0 ft lb *28,950 *28,950 *34,150 28,400 *24,600 14,800 15,700 9,900 13,700 8,800 22.50 –4.5 m kg *11 800 *11 800 *8600 7100 *6850 5650 5.32

–15.0 ft lb *25,100 *25,100 *18,100 15,300 *14,950 12,750 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Blade – Down)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,350 *11,350 14.17

7.5 m kg *6200 *6200 *5350 *5350 *4200 *4200 6.28

25.0 ft lb *13,650 *13,650 *10,150 *10,150 *9,350 *9,350 20.83

6.0 m kg *6650 *6650 *6400 6100 *3950 *3950 7.35

20.0 ft lb *14,500 *14,500 *14,050 13,050 *8,700 *8,700 24.17

4.5 m kg *10 650 *10 650 *8150 *8150 *7050 5900 *6300 4200 *3900 3750 8.00

15.0 ft lb *22,700 *22,700 *17,600 *17,600 *15,300 12,700 *12,700 8,950 *8,550 8,300 26.67

3.0 m kg *10 250 8700 *8000 5650 *6900 4100 *4000 3500 8.33

10.0 ft lb *22,100 18,700 *17,350 12,200 *15,000 8,750 *8,800 7,650 27.50

1.5 m kg *12 050 8200 *8900 5450 *7300 3950 *4250 3400 8.39

5.0 ft lb *26,050 17,600 *19,300 11,700 *15,900 8,550 *9,350 7,450 27.50

0 m kg *7450 *7450 *12 850 7900 *9450 5250 *7550 3900 *4750 3450 8.17 0 ft lb *17,000 *17,000 *27,800 17,050 *20,500 11,350 *16,300 8,350 *10,450 7,600 27.50

–1.5 m kg *7750 *7750 *12 400 *12 400 *12 600 7850 *9400 5200 *7250 3850 *5650 3800 7.65 –5.0 ft lb *17,300 *17,300 *28,100 *28,100 *27,350 16,900 *20,350 11,200 *12,700 8,350 *12,400 8,300 25.00 –3.0 m kg *12 900 *12 900 *15 750 *15 750 *11 400 7950 *8450 5250 *7100 4500 6.76

–10.0 ft lb *28,950 *28,950 *34,150 33,750 *24,600 17,050 *18,150 11,300 *15,650 10,000 22.50 –4.5 m kg *11 800 *11 800 *8600 8150 *6850 6450 5.32

–15.0 ft lb *25,100 *25,100 *18,100 17,600 *14,950 14,600 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 5350 *3900 3800 7.35

20.0 ft lb *14,350 *14,350 *13,850 11,450 *8,650 8,500 24.17

4.5 m kg *10 600 *10 600 *8100 8050 *6950 5150 5550 3650 *3850 3250 8.00

15.0 ft lb *22,500 *22,500 *17,450 17,350 *15,100 11,100 11,850 7,800 *8,500 7,200 26.67

3.0 m kg *10 150 7500 7650 4900 5400 3550 *3950 3000 8.33

10.0 ft lb *21,850 16,150 16,450 10,600 11,650 7,600 *8,700 6,600 27.50

1.5 m kg 11 700 7000 7400 4700 5300 3400 *4250 2900 8.39

5.0 ft lb 25,100 15,050 15,900 10,050 11,350 7,350 *9,300 6,400 27.50

0 m kg *7400 *7400 11 400 6750 7200 4500 5200 3350 4600 3000 8.17 0 ft lb *16,950 *16,950 24,400 14,500 15,500 9,700 11,150 7,150 10,150 6,550 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 11 300 6650 7150 4450 5200 3300 5050 3250 7.65 –5.0 ft lb *17,200 *17,200 *28,050 27,500 24,250 14,350 15,350 9,600 11,150 7,150 11,150 7,150 25.00 –3.0 m kg *12 900 *12 900 *15 600 13 050 *11 250 6750 7200 4500 6100 3900 6.76

–10.0 ft lb *28,900 *28,900 *33,750 28,000 *24,300 14,500 15,450 9,700 13,500 8,600 22.50 –4.5 m kg *11 600 *11 600 *8450 7000 *6750 5550 5.32

–15.0 ft lb *24,750 *24,750 *17,850 15,100 *14,700 12,550 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Reach Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 5.7 m (18'8") 790 mm �(31") HD Triple Grouser Shoes (Blade – Down)

3646 mm (12'0")

R2.9B1 TRS

2380 mm (7'8") 4455 mm (14'6")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *5000 *5000 4.50

30.0 ft lb *11,300 *11,300 14.17

7.5 m kg *6100 *6100 *5300 *5300 *4200 *4200 6.28

25.0 ft lb *13,500 *13,500 *10,050 *10,050 *9,300 *9,300 20.83

6.0 m kg *6600 *6600 *6350 6000 *3900 *3900 7.35

20.0 ft lb *14,350 *14,350 *13,850 12,900 *8,650 *8,650 24.17

4.5 m kg *10 600 *10 600 *8100 *8100 *6950 5850 *6250 4100 *3850 3700 8.00

15.0 ft lb *22,500 *22,500 *17,450 *17,450 *15,100 12,550 *12,650 8,800 *8,500 8,150 26.67

3.0 m kg *10 150 8550 *7900 5600 *6800 4000 *3950 3400 8.33

10.0 ft lb *21,850 18,450 *17,100 12,000 *14,800 8,600 *8,700 7,500 27.50

1.5 m kg *11 950 8050 *8800 5350 *7200 3900 *4250 3300 8.39

5.0 ft lb *25,750 17,350 *19,050 11,500 *15,650 8,350 *9,300 7,250 27.50

0 m kg *7400 *7400 *12 700 7800 *9350 5150 *7450 3800 *4700 3400 8.17 0 ft lb *16,950 *16,950 *27,500 16,750 *20,250 11,100 *16,100 8,150 *10,350 7,450 27.50

–1.5 m kg *7700 *7700 *12 350 *12 350 *12 450 7700 *9300 5100 *7150 3800 *5600 3700 7.65 –5.0 ft lb *17,200 *17,200 *28,050 *28,050 *27,000 16,600 *20,100 11,000 *12,650 8,150 *12,300 8,150 25.00 –3.0 m kg *12 900 *12 900 *15 600 15 600 *11 250 7800 *8350 5150 *7000 4400 6.76

–10.0 ft lb *28,900 *28,900 *33,750 33,300 *24,300 16,750 *17,950 11,100 *15,400 9,800 22.50 –4.5 m kg *11 600 *11 600 *8450 8050 *6750 6350 5.32

–15.0 ft lb *24,750 *24,750 *17,850 17,350 *14,700 14,400 17.50

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Variable Angle Boom Lift Capacities – Counterweight: 6.7 mt (14,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 2.7 m (8'10") Stub/

3.3 m (10'10") Fore

600 mm �(24") HD Triple Grouser Shoes 3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *6650 *6650 *4950 *4950 5.12

30.0 ft lb *13,700 *13,700 *11,150 *11,150 16.08

7.5 m kg *7000 *7000 *6400 5750 *4200 *4200 6.73

25.0 ft lb *15,400 *15,400 *13,450 12,250 *9,350 *9,350 21.75

6.0 m kg *7350 *7350 *7150 5650 *5250 3900 *3950 3650 7.74

20.0 ft lb *16,100 *16,100 *15,550 12,200 *9,650 8,300 *8,650 8,150 25.25

4.5 m kg *13 750 *13 750 *9550 8500 *7550 5450 *6050 3800 *3850 3150 8.36

15.0 ft lb *29,500 *29,500 *20,600 18,300 *16,350 11,700 *13,100 8,150 *8,450 7,000 27.33

3.0 m kg *10 700 7750 *8050 5100 6000 3650 *3900 2900 8.68

10.0 ft lb *23,150 16,700 *17,400 11,000 12,950 7,900 *8,600 6,400 28.41

1.5 m kg *11 250 7150 8150 4800 5850 3500 *4100 2800 8.73

5.0 ft lb *24,350 15,450 17,550 10,350 12,600 7,550 *9,050 6,200 28.67

0 m kg *10 700 6900 7950 4650 5750 3400 *4500 2900 8.52 0 ft lb *23,200 14,800 17,100 9,950 12,350 7,350 *9,900 6,350 27.92

–1.5 m kg *10 150 *10 150 *9200 6850 *7150 4550 *5300 3400 *4450 3150 8.02 –5.0 ft lb *23,000 *23,000 *20,000 14,700 *15,400 9,800 *11,200 7,300 *9,750 6,900 26.25 –3.0 m kg *6850 *6850 *5300 4650 *3950 3800 6.98

–10.0 ft lb *14,700 *14,700 *11,250 9,950 *8,800 8,500 22.58

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Max length of VAB.

Variable Angle Boom Lift Capacities – Counterweight: 6.7 mt (14,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 2.7 m (8'10") Stub/

3.3 m (10'10") Fore

790 mm �(31") HD Triple Grouser Shoes 3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *6650 *6650 *4950 *4950 5.12

30.0 ft lb *13,700 *13,700 *11,150 *11,150 16.08

7.5 m kg *7000 *7000 *6400 5900 *4200 *4200 6.73

25.0 ft lb *15,400 *15,400 *13,450 12,550 *9,350 *9,350 21.75

6.0 m kg *7350 *7350 *7150 5800 *5250 4000 *3950 3750 7.74

20.0 ft lb *16,100 *16,100 *15,550 12,450 *9,650 8,500 *8,650 8,350 25.25

4.5 m kg *13 750 *13 750 *9550 8700 *7550 5550 *6050 3900 *3850 3250 8.36

15.0 ft lb *29,500 *29,500 *20,600 18,700 *16,350 11,950 *13,100 8,400 *8,450 7,150 27.33

3.0 m kg *10 700 7950 *8050 5250 6200 3750 *3900 3000 8.68

10.0 ft lb *23,150 17,150 *17,400 11,300 13,300 8,100 *8,600 6,600 28.41

1.5 m kg *11 250 7350 *8300 4950 6000 3600 *4100 2900 8.73

5.0 ft lb *24,350 15,850 *17,950 10,650 12,950 7,800 *9,050 6,400 28.67

0 m kg *10 700 7100 *8050 4750 5900 3500 *4500 2950 8.52 0 ft lb *23,200 15,250 *17,400 10,250 12,700 7,550 *9,900 6,500 27.92

–1.5 m kg *10 150 *10 150 *9200 7050 *7150 4700 *5300 3500 *4450 3250 8.02 –5.0 ft lb *23,000 *23,000 *20,000 15,150 *15,400 10,100 *11,200 7,550 *9,750 7,100 26.25 –3.0 m kg *6850 *6850 *5300 4750 *3950 3950 6.98

–10.0 ft lb *14,700 *14,700 *11,250 10,250 *8,800 8,750 22.58

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Max length of VAB.

Variable Angle Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 2.7 m (8'10") Stub/

3.3 m (10'10") Fore

600 mm �(24") HD Triple Grouser Shoes (Blade – Up in Front)

3646 mm (12'0")

R2.9B1

2380 mm (7'8") 4455 mm (14'6")

3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

9.0 m kg *6700 *6700 *4950 *4950 5.12

30.0 ft lb *13,750 *13,750 *11,200 *11,200 16.08

7.5 m kg *7000 *7000 *6450 5300 *4250 *4250 6.73

25.0 ft lb *15,450 *15,450 *13,500 11,300 *9,400 *9,400 21.75

6.0 m kg *7350 *7350 *7050 5200 *5250 3550 *3950 3350 7.74

20.0 ft lb *16,150 *16,150 *15,200 11,200 *9,700 7,550 *8,700 7,400 25.25

4.5 m kg *13 800 *13 800 *9550 7800 *7400 4950 5400 3450 *3850 2850 8.36

15.0 ft lb *29,500 *29,500 *20,600 16,850 *16,000 10,700 11,550 7,400 *8,500 6,300 27.33

3.0 m kg *10 700 7050 *7450 4650 5250 3300 *3950 2600 8.68

10.0 ft lb *23,150 15,250 *15,950 10,000 11,250 7,100 *8,650 5,750 28.41

1.5 m kg 11 200 6450 7100 4350 5050 3150 4050 2550 8.73

5.0 ft lb 24,000 13,950 15,250 9,350 10,900 6,800 8,900 5,550 28.67

0 m kg *10 650 6200 6850 4150 4950 3050 4150 2600 8.52 0 ft lb *23,150 13,300 14,750 8,950 10,650 6,600 9,100 5,650 27.92

–1.5 m kg *9900 *9900 *9200 6150 *6800 4100 4950 3050 *4450 2800 8.02 –5.0 ft lb *22,450 *22,450 *20,000 13,200 *14,600 8,800 10,600 6,550 *9,750 6,150 26.25 –3.0 m kg *6850 *6250 *5300 4150 *3950 3450 6.98

–10.0 ft lb *14,700 *13,450 *11,250 8,950 *8,800 7,650 22.58

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Max length of VAB.

Variable Angle Boom Lift Capacities – Counterweight: 4.9 mt (10,800 lb) – without Bucket, Heavy Lift: On

2.9 m (9'6") 2.7 m (8'10") Stub/

3.3 m (10'10") Fore

600 mm �(24") HD Triple Grouser…