AEXQ3758_320__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weight and Ground Pressure

Major Component Weights

Dimensions

Working Ranges

Working Ranges

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb)

HD Reach Boom Lift Capacities – Counterweight: 4.7 mt (10,400 lb) . . 8

Super Long Reach (SLR) Boom Lift Capacities – Counterweight: 4.7 mt (10,400 lb)

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment Dealer Installed Kit and Attachments 320 Environmental Declaration

Engine

Engine Model Cat® C4.4

Net Power

ISO 9249 128.5 kW 172 hp

ISO 9249 (DIN) 175 hp (metric)

Engine Power

ISO 14396 129.4 kW 174 hp

ISO 14396 (DIN) 176 hp (metric)

Bore 105 mm 4 in

Stroke 127 mm 5 in

Displacement 4.4 L 269 in3

Biodiesel capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

• Recommended for use up to 4500 m (14,760 ft) altitude with engine power derate above 3000 m (9,840 ft).

• Advertised power is tested per the specified standard in effect at the time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

• Engine speed at 2,200 rpm.

(1)�Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 11.25 rpm

Maximum Swing Torque 82 kN·m 60,300 lbf·ft

Weights

Operating Weight 22 600 kg 49,800 lb

• Reach boom, R2.9 (9'6") stick, Heavy Duty (HD) 1.19 m3 (1.56 yd3) bucket 790 mm (31 in) triple grouser shoes, 4.2 mt (10,400 lb) counterweight.

Track

Track Shoe Width 790 mm 31 in

Number of Shoes (each side) 49

Number of Track Rollers (each side) 8

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.7 km/h 3.5 mph

Maximum Drawbar Pull – Long Undercarriage

205 kN 45,996 lbf

Hydraulic System

Main System – Maximum Flow – Implement

429 L/min (214.5 × 2 pumps)

113 gal/min (56.5 × 2 pumps)

Maximum Pressure – Equipment – Normal

35 000 kPa 5,075 psi

Maximum Pressure – Equipment – Heavy Lift Mode/Auto Dig Boost

38 000 kPa 5,510 psi

Maximum Pressure – Travel 34 300 kPa 4,974 psi

Maximum Pressure – Swing 27 500 kPa 3,998 psi

Boom Cylinder – Bore 120 mm 4.7 in

Boom Cylinder – Stroke 1260 mm 49.6 in

Stick Cylinder – Bore 140 mm 5.5 in

Stick Cylinder – Stroke 1504 mm 59.2 in

Bucket Cylinder – Bore 120 mm 4.7 in

Bucket Cylinder – Stroke 1104 mm 43.5 in

Service Refill Capacities

Fuel Tank Capacity 345 L 86.6 gal

Cooling System 25 L 6.6 gal

Engine Oil 15 L 4.0 gal

Swing Drive (each) 6 L 1.6 gal

Final Drive (each) 4 L 1.1 gal

Hydraulic System (including tank) 234 L 61.8 gal

Hydraulic Tank 115 L 30.4 gal

Diesel Exhaust Fluid (DEF) Tank 39 L 10.3 gal

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab/Operator Protective Guard (OPG) (optional)

ISO 10262:1998 Level II

Sound Performance

ISO 6395:2008 (external) 99 dB(A)

ISO 6396:2008 (inside cab) 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

320 Hydraulic Excavator Specifications

Operating Weight and Ground Pressure

Base Machine Configurations

790 mm (31 in) Triple Grouser Shoes

Weight Ground Pressure Base Frame with Track Rollers and Carrier Rollers

4.2 mt (9,300 lb) Counterweight + Long Undercarriage Base Machine Reach Boom + R2.9 (9'6") Stick + 1.19 m3 (1.56 yd3) HD Bucket 22 600 kg 49,800 lb 35.7 kPa 5.2 psi

4.7 mt (10,400 lb) Counterweight + Long Undercarriage Base Machine HD Reach Boom + HD R2.9 (9'6") Thumb Ready Stick + 1.19 m3 (1.56 yd3) HD Bucket 24 300 kg 53,600 lb 38.4 kPa 5.6 psi

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine (with 4.2 mt [9,300 lb] counterweight, semi-HD swing frame, standard base frame with HD track rollers and standard carrier rollers for long undercarriage – does not include boom, stick, bucket, boom cylinders, stick cylinder, bucket cylinder, tracks, 90% fuel tank and 75 kg [165 lb] operator)

14 800 32,600

Base Machine (with 4.7 mt [10,400 lb] counterweight, HD swing frame, HD base frame with SD track rollers and SD carrier rollers for long undercarriage – does not include boom, stick, bucket, boom cylinders, stick cylinder, bucket cylinder, tracks, 90% fuel tank and 75 kg [165 lb] operator)

16 000 35,300

Track Shoes:

790 mm (31 in) Width, 10 mm (0.39 in) Thick Triple Grouser Track Shoes with Step Extension 3370 7,400

Two Boom Cylinders 340 700

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 310 700

Counterweights:

4.2 mt (9,300 lb) Counterweight 4200 9,300

4.7 mt (10,400 lb) Counterweight 4700 10,400

Swing Frame:

Semi-HD Swing Frame 1910 4,210

Undercarriage:

Standard Base Frame with HD Track Rollers and Standard Carrier Rollers 4390 9,700

Booms (including lines, pins, stick cylinder):

Reach Boom 5.7 m (18'8") 1710 3,800

HD Reach Boom 5.7 m (18'8") 2010 4,400

Super Long Reach (SLR) Boom 8.85 m (29'0") 2170 4,800

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R2.9B1 (9'6") 1080 2,400

HD Thumb Ready Reach Stick R2.9B1 (9'6") 1300 2,900

Super Long Reach Stick 6.28A (20'7") 1340 3,000

Buckets (without linkage):

1.19 m3 (1.56 yd3) HD 960 2,100

0.53 m3 (0.69 yd3) General Duty (GD) 410 900

0.57 m3 (0.75 yd3) Ditch Cleaning (DC) 390 900

Quick Couplers:

Pin Grabber 390 900

Universal 230 500

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Options Reach/HD Reach Boom SLR Boom

5.7 m (18'8") 8.85 m (29'0")

Stick Options Reach/HD TR Reach Stick SLR Stick R2.9B1 (9'6") 6.28A (20'7")

1 Machine Height:

Top of Cab Height 2960 mm 9'9" 2960 mm 9'9"

Top of GNSS Antenna Height (if installed) 3000 mm 9'10" 3000 mm 9'10"

Top of OPG Height 3100 mm 10'2" 3100 mm 10'2"

Handrail Height 2950 mm 9'8" 2950 mm 9'8"

With Boom/Stick/Bucket Installed 3160 mm 10'4" 3190 mm 10'6"

With Boom/Stick Installed 2910 mm 9'7" 3070 mm 10'1"

With Boom Installed 2480 mm 8'2" 2650 mm 8'8"

2 Machine Length:

With Boom/Stick/Bucket Installed 9530 mm 31'3" 12 750 mm 41'10"

With Boom/Stick Installed 9500 mm 31'2" 12 760 mm 41'10"

With Boom Installed 8450 mm 27'9" 8920 mm 29'3"

3 Upperframe Width 2780 mm 9'1" 2780 mm 9'1"

4 Tail Swing Radius 2830 mm 9'3" 2830 mm 9'3"

5 Counterweight Clearance 1050 mm 3'5" 1050 mm 3'5"

6 Ground Clearance 470 mm 1'7" 470 mm 1'7"

7 Track Length 4450 mm 14'7" 4450 mm 14'7"

8 Length to Center of Rollers 3650 mm 12'0" 3650 mm 12'0"

9 Track Gauge 2380 mm 7'9" 2380 mm 7'9"

10 Undercarriage Width:

790 mm (31 in) Shoes 3170 mm 10'5" 3170 mm 10'5"

Bucket Type HD DC

Bucket Capacity 1.14 m3 1.50 yd3 0.57 m3 0.75 yd3

Bucket Tip Radius 1470 mm 4'10" 1070 mm 3'6"

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

01234567891011 –1 m m

R2.9B1 (9'6")

05101520253035 ft ft

Boom Option Reach/HD Reach Boom

5.7 m (18'8")

Stick Option Reach/HD TR Reach Stick R2.9B1 (9'6")

1 Maximum Digging Depth 6620 mm 21'9"

2 Maximum Reach at Ground Line 9760 mm 32'0"

3 Maximum Cutting Height 9330 mm 30'7"

4 Maximum Loading Height 6590 mm 21'7"

5 Minimum Loading Height 2270 mm 7'5"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 6440 mm 21'2"

7 Maximum Vertical Wall Digging Depth 5360 mm 17'7"

Bucket Digging Force (ISO) 163 kN 36,711 lbf

Stick Digging Force (ISO) 109 kN 24,486 lbf

Bucket Digging Force (ISO) – Auto Dig Boost 177 kN 39,858 lbf

Stick Digging Force (ISO) – Auto Dig Boost 118 kN 26,585 lbf

Bucket Type HD

Bucket Capacity 1.14 m3 1.50 yd3

Bucket Tip Radius 1470 mm 4'10"

Working Ranges All dimensions are approximate and may vary depending on bucket selection.

121315 10 911 8 7 6 5 4 3 2 1 0 –2 –3–1 m m

1416181920 17

6.28A (20'7") ft35 304045 25 20 15 10 5 –50506065 55 ft

1 7

Boom Option SLR Boom

8.85 m (29'0")

Stick Option SLR Stick 6.28A (20'7")

1 Maximum Digging Depth 11 540 mm 37'10"

2 Maximum Reach at Ground Line 15 570 mm 51'1"

3 Maximum Cutting Height 13 540 mm 44'5"

4 Maximum Loading Height 11 440 mm 37'6"

5 Minimum Loading Height 2240 mm 7'4"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 11 440 mm 37'6"

7 Maximum Vertical Wall Digging Depth 11 020 mm 36'2"

Bucket Digging Force (ISO) 62 kN 13,841 lbf

Stick Digging Force (ISO) 49 kN 10,966 lbf

Bucket Type DC

Bucket Capacity 0.57 m3 0.75 yd3

Bucket Tip Radius 1070 mm 3'6"

Reach Boom Lift Capacities – Counterweight: 4.2 mt (9,300 lb) – without Bucket, Heavy Lift: On

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

7.5 m kg *4950 *4950 *4300 *4300 6.15

25.0 ft lb *9,550 *9,550 20.00

6.0 m kg *5450 *5450 *4000 *4000 7.29

20.0 ft lb *11,950 11,900 *8,800 *8,800 24.17

4.5 m kg *6000 5400 *5650 3800 *3900 3450 7.99

15.0 ft lb *13,000 11,600 *12,350 8,200 *8,600 7,600 23.67

3.0 m kg *8700 7850 *6850 5150 5750 3700 *4000 3150 8.36

10.0 ft lb *18,750 16,850 *14,900 11,100 12,300 8,000 *8,800 6,950 27.50

1.5 m kg *10 550 7350 *7800 4900 5600 3600 *4250 3050 8.45

5.0 ft lb *22,800 15,800 16,800 10,600 12,050 7,750 *9,350 6,700 28.33

0 m kg *6600 *6600 *11 600 7050 7600 4750 5500 3500 *4700 3100 8.26 0 ft lb *15,200 *15,200 *25,050 15,200 16,400 10,250 11,850 7,600 *10,350 6,800 27.50

–1.5 m kg *7100 *7100 *11 400 *11 400 *11 700 6950 7550 4700 5500 3500 5250 3350 7.78 –5.0 ft lb *15,800 *15,800 *25,900 *25,900 *25,350 15,000 16,200 10,050 11,800 7,550 11,500 7,350 25.83 –3.0 m kg *12 100 *12 100 *15 500 13 550 *10 950 7050 7600 4700 6150 3900 6.95

–10.0 ft lb *27,150 *27,150 *33,600 29,050 *23,700 15,150 16,300 10,150 13,650 8,700 23.33 –4.5 m kg *12 400 *12 400 *8950 7250 *6750 5400 5.60

–15.0 ft lb *26,550 *26,550 *19,000 15,600 *14,850 12,100 18.33

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

2.9 m (9'6")

R2.9B1

5.7 m (18'8")

2380 mm (7'9")

790 mm (31") Triple Grouser Shoes

4450 mm (14'7")

3650 mm (12'0")

HD Reach Boom Lift Capacities – Counterweight: 4.7 mt (10,400 lb) – without Bucket, Heavy Lift: On

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

7.5 m kg *4900 *4900 *4250 *4250 6.15

25.0 ft lb *9,400 *9,400 20.00

6.0 m kg *5350 *5350 *3900 *3900 7.29

20.0 ft lb *11,750 *11,750 *8,650 *8,650 24.17

4.5 m kg *5900 5700 *5500 4000 *3850 3600 7.99

15.0 ft lb *12,800 12,200 *12,100 8,600 *8,450 8,000 26.67

3.0 m kg *8600 8300 *6750 5450 *5900 3900 *3950 3300 8.36

10.0 ft lb *18,500 17,850 *14,650 11,700 *12,850 8,400 *8,600 7,250 27.50

1.5 m kg *10 400 7750 *7650 5200 5900 3800 *4150 3200 8.45

5.0 ft lb *22,450 16,650 *16,600 11,150 12,650 8,150 *9,150 7,000 28.33

0 m kg *6750 *6750 *11 400 7450 8000 5000 5750 3700 *4600 3250 8.26 0 ft lb *15,450 *15,450 *24,700 16,000 17,200 10,750 12,400 7,950 *10,150 7,100 27.50

–1.5 m kg *7200 *7200 *11 650 *11 650 *11 500 7350 7900 4900 5750 3650 *5400 3500 7.78 –5.0 ft lb *16,050 *16,050 *26,450 *26,450 *24,950 15,800 17,000 10,600 12,350 7,900 *11,950 7,700 25.83 –3.0 m kg *12 350 *12 350 *15 300 14 300 *10 800 7400 7950 4950 6450 4100 6.95

–10.0 ft lb *27,750 *27,750 *33,100 30,650 *23,300 15,950 17,100 10,650 14,300 9,100 23.33 –4.5 m kg *12 150 *12 150 *8750 7650 *6600 5650 5.60

–15.0 ft lb *26,050 *26,050 *18,600 16,450 *14,500 12,700 18.33

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

2.9 m (9'6")

HD

R2.9B1-

TRS

5.7 m (18'8")

2380 mm (7'9")

790 mm (31") Triple Grouser Shoes

4450 mm (14'7")

3650 mm (12'0")

Super Long Reach Boom Lift Capacities – Counterweight: 4.7 mt (10,400 lb) – without Bucket

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.25

10.5 m kg *1350 *1350 11.66

35.0 ft lb *2,950 *2,950 37.75

9.0 m kg *1300 *1300 12.66

30.0 ft lb *2,850 *2,850 41.17

7.5 m kg *1250 *1250 13.41

25.0 ft lb *2,800 *2,800 43.75

6.0 m kg *1250 *1250 13.97

20.0 ft lb *2,750 *2,750 45.67

4.5 m kg *1300 1250 14.34

15.0 ft lb *2,800 2,700 46.92

3.0 m kg *4700 *4700 *6050 *6050 *4450 *4450 *3600 *3600 *1300 1150 14.55

10.0 ft lb *11,800 *11,800 *12,900 *12,900 *9,550 *9,550 *7,800 *7,800 *2,900 2,550 47.67

1.5 m kg *6750 6500 *5250 4500 *4100 3350 *1400 1150 14.60

5.0 ft lb *15,950 14,100 *11,300 9,700 *8,850 7,200 *3,000 2,450 47.83

0 m kg *2000 *2000 *4650 *4650 *5900 4050 *4550 3050 *1450 1100 14.49 0 ft lb *4,550 *4,550 *10,700 *10,700 *12,700 8,750 *9,800 6,550 *3,200 2,400 47.50

–1.5 m kg *2100 *2100 *2700 *2700 *4650 *4650 *6250 3800 *4850 2850 *1550 1100 14.23 –5.0 ft lb *4,600 *4,600 *6,050 *6,050 *10,500 *10,500 *13,550 8,150 10,450 6,100 *3,450 2,450 46.58 –3.0 m kg *2850 *2850 *3500 *3500 *5200 *5200 *6400 3650 4750 2700 *1750 1150 13.79

–10.0 ft lb *6,350 *6,350 *7,850 *7,850 *11,700 11,700 *13,900 7,850 10,150 5,800 *3,800 2,550 45.17 –4.5 m kg *3650 *3650 *4400 *4400 *6050 5500 *6400 3600 4650 2650 *1950 1250 13.17

–15.0 ft lb *8,150 *8,150 *9,900 *9,900 *13,700 11,750 *13,800 7,750 10,050 5,700 *4,300 2,750 43.08 –6.0 m kg *4550 *4550 *5400 *5400 *7200 5600 *6150 3650 4700 2650 *2300 1400 12.34

–20.0 ft lb *10,100 *10,100 *12,150 *12,150 *16,300 12,000 *13,250 7,850 10,050 5,750 *5,100 3,050 40.25 –7.5 m kg *5500 *5500 *6550 *6550 *7300 5800 *5650 3750 *4550 2750 *2700 1650 11.24

–25.0 ft lb *12,250 *12,250 *14,800 *14,800 *15,650 12,450 *12,150 8,100 *9,750 5,900 *5,950 3,650 36.50 –9.0 m kg *7950 *7950 *6150 6050 *4850 3950 *3900 2900 *2700 2050 9.80

–30.0 ft lb *17,450 *17,450 *13,100 *13,100 *10,350 8,500 *8,300 6,250 *5,900 4,650 31.58

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

(continued on next page)

6.28 m (20'7")

Super Long

Reach

8.85 m (29'0")

2380 mm (7'9")

790 mm (31") Triple Grouser Shoes

4450 mm (14'7")

3650 mm (12'0")

Super Long Reach Boom Lift Capacities – Counterweight: 4.7 mt (10,400 lb) – without Bucket (continued)

9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft 13.5 m/45.0 ft m ft

12.0 m kg *1450 *1450 10.35

40.0 ft lb *3,200 *3,200 33.25

10.5 m kg *2200 *2200 *1350 *1350 11.66

35.0 ft lb *4,850 *4,850 *2,950 *2,950 37.75

9.0 m kg *2200 *2200 *2200 1950 *1300 *1300 12.66

30.0 ft lb *4,800 *4,800 *4,200 4,150 *2,850 *2,850 41.17

7.5 m kg *2250 *2250 *2200 1950 *1250 *1250 13.41

25.0 ft lb *4,900 *4,900 *4,850 4,150 *2,800 *2,800 43.75

6.0 m kg *2400 *2400 *2300 1900 *2100 1450 *1250 *1250 13.97

20.0 ft lb *5,200 *5,200 *5,000 4,050 *3,700 3,100 *2,750 *2,750 45.67

4.5 m kg *2800 *2800 *2550 2300 *2400 1800 *2300 1450 *1300 1250 14.34

15.0 ft lb *6,050 *6,050 *5,550 4,950 *5,200 3,850 5,000 3,000 *2,800 2,700 46.92

3.0 m kg *3100 2800 *2800 2200 *2550 1700 2300 1350 *1300 1150 14.55

10.0 ft lb *6,750 6,000 *6,000 4,650 *5,500 3,650 4,900 2,900 *2,900 2,550 47.67

1.5 m kg *3450 2550 *3000 2050 *2700 1650 2250 1300 *1400 1150 14.60

5.0 ft lb *7,400 5,500 *6,450 4,350 5,750 3,450 4,750 2,800 *3,000 2,450 47.83

0 m kg *3700 2400 3150 1900 2600 1550 2150 1250 *1450 1100 14.49 0 ft lb *8,050 5,100 6,800 4,050 5,550 3,300 4,650 2,650 *3,200 2,400 47.50

–1.5 m kg 3800 2250 3050 1800 2500 1450 2150 1200 *1550 1100 14.23 –5.0 ft lb 8,150 4,750 6,550 3,850 5,400 3,150 4,550 2,600 *3,450 2,450 46.58 –3.0 m kg 3700 2150 3000 1700 2500 1400 2100 1200 *1750 1150 13.79

–10.0 ft lb 7,900 4,550 6,400 3,700 5,300 3,050 *4,200 2,550 *3,800 2,550 45.17 –4.5 m kg 3650 2100 2950 1700 2450 1400 *1950 1250 13.17

–15.0 ft lb 7,800 4,450 6,300 3,600 5,300 3,000 *4,300 2,750 43.08 –6.0 m kg 3650 2100 2950 1700 2500 1450 *2300 1400 12.34

–20.0 ft lb 7,800 4,500 6,350 3,650 5,350 3,100 *5,100 3,050 40.25 –7.5 m kg 3700 2150 3000 1750 *2700 1650 11.24

–25.0 ft lb 7,950 4,600 *6,450 3,800 *5,950 3,650 36.50 –9.0 m kg *3150 2300 *2700 2050 9.80

–30.0 ft lb *6,500 4,950 *5,900 4,650 31.58

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

6.28 m (20'7")

Super Long

Reach

8.85 m (29'0")

2380 mm (7'9")

790 mm (31") Triple Grouser Shoes

4450 mm (14'7")

3650 mm (12'0")

Bucket Specifications and Compatibility

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) 4.7 mt (10,400 lb)

Linkage

Width Capacity Weight Fill Reach Boom HD Reach Boom SLR Boom mm in m3 yd3 kg lb % R2.9 (9'6")

HD R2.9

(9'6") TRS

6.28A (20'7")

Pin-On (No Quick Coupler) General Duty Capacity B 600 24 0.55 0.72 620 1,366 100

B 750 30 0.75 0.98 717 1,580 100 B 900 36 0.95 1.24 793 1,747 100 B 1050 42 1.16 1.52 848 1,869 100 B 1200 48 1.38 1.80 924 2,038 100 B 1350 54 1.59 2.08 1002 2,210 100

General Duty Capacity – Wide Tip

B 600 24 0.55 0.72 617 1,360 100 B 750 30 0.75 0.98 715 1,576 100 B 900 36 0.95 1.24 791 1,743 100 B 1050 42 1.16 1.52 861 1,899 100 B 1200 48 1.38 1.80 938 2,069 100 B 1350 54 1.59 2.08 1016 2,241 100

Heavy Duty B 600 24 0.46 0.60 647 1,426 100 B 750 30 0.64 0.84 752 1,658 100 B 900 36 0.81 1.06 835 1,841 100 B 1050 42 1.00 1.31 892 1,967 100 B 1200 48 1.19 1.56 975 2,150 100 B 1350 54 1.38 1.81 1060 2,336 100 X X

Heavy Duty Power B 1050 42 0.96 1.26 898 1,980 100 B 1200 48 1.14 1.49 983 2,167 100 X X

Severe Duty B 600 24 0.46 0.61 683 1,506 90 B 750 30 0.64 0.84 795 1,753 90 B 900 36 0.81 1.06 885 1,950 90 B 1050 42 1.00 1.31 948 2,091 90 B 1200 48 1.19 1.56 1038 2,289 90

Severe Duty Power B 900 36 0.79 1.03 853 1,881 90 Clean Up B 1800 72 1.60 2.09 979 2,157 100

B 2000 78 1.76 2.31 1045 2,303 100 Ditch Cleaning B 1500 60 1.01 1.32 651 1,436 100

B 1800 72 1.24 1.62 739 1,630 100 Ditch Cleaning Tilt B 1500 60 0.90 1.18 948 2,090 100

B 1800 72 1.11 1.45 1063 2,344 100 B 1800 72 1.40 1.83 1105 2,437 100 B 2000 79 1.23 1.61 1132 2,496 100

Tamping B 2200 86 0.72 0.94 868 1,913 100 B 2200 86 0.90 1.18 891 1,965 100

General Duty 312, A 900 36 0.53 0.69 403 888 100 Ditch Cleaning 312, A 1200 48 0.57 0.74 386 851 100

Maximum load with pin-on (payload + bucket) kg 3010 3245 800 lb 6,636 7,154 1,764

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

(continued on next page)

Bucket Specifications and Compatibility (continued)

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) 4.7 mt (10,400 lb) Width Capacity Weight Fill Reach Boom HD Reach Boom SLR Boom

Linkage mm in m3 yd3 kg lb % R2.9 (9'6")

HD R2.9

(9'6") TRS

6.28A (20'7")

With Cat Pin Grabber Coupler General Duty Capacity B 600 24 0.55 0.72 620 1,366 100

B 750 30 0.75 0.98 717 1,580 100 B 900 36 0.95 1.24 793 1,747 100 B 1050 42 1.16 1.52 848 1,869 100 B 1200 48 1.38 1.80 924 2,038 100 B 1350 54 1.59 2.08 1002 2,210 100

General Duty Capacity – Wide Tip

B 600 24 0.55 0.72 617 1,360 100 B 750 30 0.75 0.98 715 1,576 100 B 900 36 0.95 1.24 791 1,743 100 B 1050 42 1.16 1.52 861 1,899 100 B 1200 48 1.38 1.80 938 2,069 100 B 1350 54 1.59 2.08 1016 2,241 100

Heavy Duty B 600 24 0.46 0.60 647 1,426 100 B 750 30 0.64 0.84 752 1,658 100 B 900 36 0.81 1.06 835 1,841 100 B 1050 42 1.00 1.31 892 1,967 100 B 1200 48 1.19 1.56 975 2,150 100 B 1350 54 1.38 1.81 1060 2,336 100

Heavy Duty Power B 1050 42 0.96 1.26 898 1,980 100 B 1200 48 1.14 1.49 983 2,167 100

Heavy Duty Pin Grabber Performance

B 600 24 0.44 0.57 682 1,503 100 B 750 30 0.60 0.79 787 1,735 100 B 900 36 0.76 1.00 876 1,931 100 B 1050 42 0.93 1.22 940 2,072 100 B 1200 48 1.11 1.45 1031 2,272 100 B 1350 54 1.28 1.67 1122 2,474 100

Severe Duty B 600 24 0.46 0.61 683 1,506 90 B 750 30 0.64 0.84 795 1,753 90 B 900 36 0.81 1.06 885 1,950 90 B 1050 42 1.00 1.31 948 2,091 90 B 1200 48 1.19 1.56 1038 2,289 90 B 900 36 0.79 1.03 853 1,881 90

Clean Up B 1800 72 1.60 2.09 979 2,157 100 B 2000 78 1.76 2.31 1045 2,303 100

Ditch Cleaning B 1500 60 1.01 1.32 651 1,436 100 B 1800 72 1.24 1.62 739 1,630 100

Ditch Cleaning Tilt B 1500 60 0.90 1.18 948 2,090 100 B 1800 72 1.11 1.45 1063 2,344 100 B 1800 72 1.40 1.83 1105 2,437 100 B 2000 79 1.23 1.61 1132 2,496 100

Maximum load with coupler (payload + bucket) kg 2636 2825 600 lb 5,811 6,228 1,323

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

(continued on next page)

Bucket Specifications and Compatibility (continued)

Counterweight 4.2 mt (9,300 lb) Width Capacity Weight Fill Reach Boom

Linkage mm in m3 yd3 kg lb % R2.9 (9'6") Pin-On, TRS18 S70 Heavy Duty Grading B 1600 63 1.00 1.31 691 1,523 100

B 1800 71 1.10 1.44 758 1,671 100 Heavy Duty Digging B 1150 45 0.90 1.18 778 1,715 100

B 1250 49 1.10 1.44 850 1,874 100 Heavy Duty Trenching B 600 24 0.55 0.72 460 1,014 100

Maximum load with pin-on (payload + bucket) kg 2376 lb 5,237

With S70, TRS18 S70 Heavy Duty Grading B 1600 63 1.00 1.31 691 1,523 100

B 1800 71 1.10 1.44 758 1,671 100 Heavy Duty Digging B 1150 45 0.90 1.18 778 1,715 100

B 1250 49 1.10 1.44 850 1,874 100 Heavy Duty Trenching B 600 24 0.55 0.72 460 1,014 100

Maximum load with pin-on (payload + bucket) kg 2121 lb 4,675

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

Attachments Offering Guide Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

Match Working range front only Allowed usage on machine less than 50% No Match 1800 kg/m3

(3,000 lb/yd3) 1200 kg/m3 (2,000 lb/yd3)ü * †

PIN-ON ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü

H115 S ü ü

H120 GC ü ü

H120 GC S ü ü

H120 S ü ü

H130 GC ü

H130 GC S ü

H130 S ü† ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü

MP318 Demolition Jaw ü ü

MP318 Pulverizer Jaw ü ü

MP318 Shear Jaw ü ü

MP318 Universal Jaw ü ü

Demolition and Sorting Grapples G318 ü ü

G318 WH-800 ü ü

G318 WH-1100 ü ü

Mobile Scrap and Demolition Shears S3025 Flat Top ü ü

Pulverizers P218 Secondary Pulverizer ü ü

P318 Primary Pulverizer ü ü

Compactors (Vibratory Plate) CVP110 ü ü

Rotary Cutters RC20 ü ü

Mulchers HM4015 ü ü

HM4815 ü ü

Orange Peel Grapples GSH420-500

GSH420-600

GSH420-750

GSH425-750

GSH425-950

GSH520-500

GSH520-600

GSH520-750

GSH525-750

(continued on next page)

Attachments Offering Guide (continued) Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

ü Match * Working range front only † Allowed usage on machine less than 50% No Match

CAT PIN GRABBER COUPLER ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü

H115 S ü ü H120 GC ü† ü H120 GC S ü† ü H120 S ü† ü H130 GC ü†* ü H130 GC S ü† ü H130 S ü† ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü MP318 Demolition Jaw ü ü MP318 Pulverizer Jaw ü* ü MP318 Shear Jaw ü ü MP318 Universal Jaw ü ü

Demolition and Sorting Grapples G318 ü ü G318 WH-800 ü ü G318 WH-1100 ü* ü*

Mobile Scrap and Demolition Shears S3025 Flat Top ü* Pulverizers P218 Secondary Pulverizer ü ü

P318 Primary Pulverizer ü ü Compactors (Vibratory Plate) CVP110 ü ü Rotary Cutters RC20 ü ü Mulchers HM4015 ü ü

HM4815 ü ü

S70 DEDICATED COUPLER ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü

H115 S ü ü H120 GC S ü† ü H120 S ü† ü H130 S ü† ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü MP318 Demolition Jaw ü ü MP318 Pulverizer Jaw ü ü MP318 Shear Jaw ü ü MP318 Universal Jaw ü ü

Demolition and Sorting Grapples G318 ü ü G318 WH-800 ü ü G318 WH-1100 ü ü

Mobile Scrap and Demolition Shears S3025 Flat Top ü* ü Pulverizers P218 Secondary Pulverizer ü ü

P318 Primary Pulverizer ü ü Compactors (Vibratory Plate) CVP110 ü ü Rotary Cutters RC20 ü ü

(continued on next page)

Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

ü Match * Working range front only † Allowed usage on machine less than 50% No Match

HCS70 DEDICATED COUPLER ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S ü† ü

H130 S ü† ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü

MP318 Demolition Jaw ü ü

MP318 Pulverizer Jaw ü ü

MP318 Shear Jaw ü ü

MP318 Universal Jaw ü ü

Demolition and Sorting Grapples G318 ü ü

G318 WH-800 ü ü

G318 WH-1100 ü* ü* Mobile Scrap and Demolition Shears S3025 Flat Top

Pulverizers P218 Secondary Pulverizer ü ü

P318 Primary Pulverizer ü ü

Compactors (Vibratory Plate) CVP110 ü ü

Rotary Cutters RC20 ü ü

HCS70/55 DEDICATED COUPLER ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S ü† ü

H130 S ü† ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü

MP318 Demolition Jaw ü ü

MP318 Pulverizer Jaw ü* ü

MP318 Shear Jaw ü ü

MP318 Universal Jaw ü ü

Demolition and Sorting Grapples G318 ü ü

G318 WH-800 ü ü

G318 WH-1100 ü* ü

Mobile Scrap and Demolition Shears S3025 Flat Top

Pulverizers P218 Secondary Pulverizer ü* ü

P318 Primary Pulverizer ü* ü

Compactors (Vibratory Plate) CVP110 ü ü

Rotary Cutters RC20 ü ü

(continued on next page)

Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

ü Match * Working range front only † Allowed usage on machine less than 50% No Match

TRS18 (PIN-ON TOP/S70 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü

H115 S ü ü

H120 GC S ü† ü

H120 S ü† ü

Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

TRS18 (S70 TOP/S70 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 GC S ü ü

H115 S ü ü

H120 GC S ü†* ü* H120 S ü† ü

Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

TRS18 (PIN-ON TOP/HCS70 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S ü† ü

Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

(continued on next page)

Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

ü Match * Working range front only † Allowed usage on machine less than 50% No Match

TRS18 (HCS70 TOP/HCS70 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S ü†* ü* Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

TRS18 (PIN-ON TOP/HCS70/55 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S ü† ü

Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

TRS18 (HCS70/55 TOP/HCS70/55 BOTTOM) ATTACHMENTS

Some attachments require more hydraulic flow and are best suited with a machine that has HP2 circuits and a tiltrotator with a high flow swivel.

Check the hydraulic capability of your machine and tiltrotator and the requirements of your attachment to ensure a proper match.

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Stick Length R2.9 (9'6") HD R2.9 (9'6") TRS Hydraulic Hammers H115 S ü ü

H120 S

Compactors (Vibratory Plate) CVP75 ü ü

CVP110 ü ü

NOTE: �Use hammers on tiltrotators less than 10% of working hours per year or maximum 200 hours per year. Refer to your Operation and Maintenance Manual for recommended hydraulic flow requirements.

BOOM-MOUNT ATTACHMENTS

Counterweight 4.2 mt (9,300 lb) 4.7 mt (10,400 lb) Boom Type Reach HD Reach Mobile Scrap and Demolition Shears S2050 ü ü

S3035 Flat Top ü ü

Thumb Specifications ü Match No Match

Bucket Type Tooth

Quantity

Width Pro Plus Pro Stiff Link Utility

Pin-on Cat Pin Grabber Pin-on

Cat Pin Grabber Pin-on

Cat Pin Grabber Pin-on

Cat Pin Grabbermm in

General Duty 5 902 36 ü ü ü ü ü ü ü ü 5 1056 42 ü ü ü ü ü ü ü ü 6 1208 48 ü ü ü ü ü ü ü ü 7 1350 54 ü ü ü ü ü ü ü ü

Heavy Duty 5 902 36 ü ü ü ü ü ü ü ü 5 1056 42 ü ü ü ü ü ü ü ü 6 1208 48 ü ü ü ü ü ü ü ü 7 1350 54 ü ü ü ü ü ü ü ü

Heavy Duty Power 5 1056 42 ü ü ü ü ü ü ü ü 6 1208 48 ü ü ü ü ü

Severe Duty 5 902 36 ü ü ü ü ü ü ü ü 5 1056 42 ü ü ü ü ü ü ü ü 6 1208 48 ü ü ü ü ü ü ü ü

Pin Grabber Performance Buckets

5 902 36 ü ü ü 5 1056 42 ü ü ü ü 6 1208 48 ü ü ü 7 1350 54 ü ü

Standard and Optional Equipment Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional

CAB

ROPS

OPG

High-resolution 254 mm (10") LCD touchscreen monitor

Auto bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Height-adjustable console

Tilt-up left-side console

Heated air-suspension seat

51 mm (2") seat belt

Monitor integrated Bluetooth® radio with USB/Auxiliary ports

12V DC outlets

Document storage

Overhead storage and rear storage with nets

Beverage holder

Cup holder

Openable two-piece front window

Rear window emergency exit

Radial wiper with washer

Openable polycarbonate skylight hatch

LED dome light

Floor welcome light

Roof sunscreen

Roller front sunscreen

Roller rear sunscreen

Washable floor mat

Beacon ready

Cat Stick Steer

Standard Optional

ENGINE

Cat® C4.4 twin turbo diesel engine

Three selectable power modes: Power, Smart, Eco

Auto engine speed control

Auto engine idle shutdown

Work up to 3000 m (9,842.5 ft) above sea level without engine power de-rating

52° C (125° F) high-ambient cooling capacity

Cold starting capability for –32° C (–25° F)

Double element air filter with integrated pre-cleaner

Electric fuel priming pump

Electric cooling fans with auto-reverse function

HYDRAULIC SYSTEM

Boom and stick regeneration circuits

Electronic main control valve

Auto hydraulic oil warm up

Auto Dig Boost 1

Auto heavy lift 2

Auto two-speed travel

Boom and stick drift reduction valve

Element type main hydraulic filter

Slider joysticks

Tandem type electronic main pump

Medium pressure auxiliary circuit

Hydraulic efficiency monitoring

Advanced tool control

Quick coupler circuit for Cat pin grabber

Fine swing control

1Requires heavy lift valve; not available for Super Long Reach.

2Not available for Super Long Reach.

(continued on next page)

320 Standard and Optional Equipment

Standard and Optional Equipment (continued)

Standard Optional

UNDERCARRIAGE AND STRUCTURES

790 mm (31 in) triple grouser track shoes

Tie-down points on base frame

Segmented track guiding guards

Full-length track guiding guards

Bottom guards

HD bottom guards

Swivel guard

Travel motor guards

HD travel motor guards

Grease lubricated track links

4.2 mt (9,300 lb) counterweight

4.7 mt (10,400 lb) counterweight for Super Long Reach

Semi-HD swing frame

Base frame with HD track rollers and standard carrier rollers

Storage tray in pump compartment

BOOM, STICKS AND LINKAGES

5.7 m (18'8") Reach boom

5.7 m (18'8") HD Reach boom

2.9 m (9'6") Reach stick

2.9 m (9'6") HD Thumb Ready Reach stick

8.85 m (29'0") Super Long Reach boom

6.28 m (20'7") Super Long Reach stick

Bucket linkage, B1-family with lifting eye, Cat Grade

Bucket linkage, A-family with lifting eye, SLR

ELECTRICAL SYSTEM

1,000 CCA maintenance-free batteries (×2)

Centralized electrical disconnect switch

Programmable time-delay LED working lights

LED chassis light, left-hand (LH) and right hand (RH) boom lights for Reach and SLR, cab lights

Premium surround lighting package

Standard Optional

CAT TECHNOLOGY

Cat Equipment Management:

– VisionLink® 3

– VisionLink Productivity 4

– Remote Flash

– Remote Troubleshoot

– Work tool recognition and tracking

(PL161)

– Operator Coaching 5

Cat Grade:

– Cat Grade with 2D 6

– Cat Grade with 2D with Attachment Ready Option (ARO)

– Laser catcher

– Cat Grade with 3D (single or dual

GNSS)

– Compatible with 3D grade systems from Trimble, Topcon, and Leica

– Cat Grade 3D Ready

– Cat Grade Connectivity 4

Cat Assist:6

– Grade Assist

– Boom Assist

– Bucket Assist

– Swing Assist

– Lift Assist

Cat Payload:6

– On-the-go weighing

– Semiautomatic calibration

– Payload/cycle information

– VisionLink Productivity back office reporting

Cat Advanced Payload:

– Daily totals

– Custom lists

– Smart weight target

– E-ticket Integration 4

Other:

Cat Tiltrotator (TRS) integration

3�Provides core telematics data to manage health, maintenance insights, and condition monitoring. Other plans available for more comprehensive data reporting. Consult your Cat dealer for details.

4VisionLink subscription required. Consult your Cat dealer for details.

5VisionLink subscription required for back office reporting. Consult your Cat dealer for details.

6Optional on machines equipped with a Super Long Reach boom and stick.

(continued on next page)

Standard and Optional Equipment (continued)

Standard Optional

SERVICE AND MAINTENANCE

Scheduled Oil Sampling (S·O·SSM) ports

QuickEvac™ maintenance ready

Grouped location for engine oil and fuel filters

Ground-level second dipstick for engine oil

Radiator screen

Integrated vehicle health management system

Standard Optional

SAFETY AND SECURITY

Cat Command (remote control)

2D E-Fence:

– E-ceiling

– E-floor

– E-swing

– E-wall

– E-cab avoidance

Auto hammer stop

Rearview and right-side-view cameras

360° visibility

Neutral lever (lock out) for all controls

Anti-skid plate and countersunk bolts on service platform

Ground-level accessible secondary engine shutoff switch in cab

Lockable disconnect switch

RH handrail and handhold

Travel alarm

Swing alarm

Inspection lighting

6�Optional on machines equipped with a Super Long Reach boom and stick.

CAB

ELECTRICAL

• Premium surround working lights

GUARDS

MAINTENANCE

SAFETY AND SECURITY

OTHER ATTACHMENTS

Dealer Installed Kit and Attachments Attachments may vary. Consult your Cat dealer for details.

320 Attachments

Engine

• The Cat® C4.4 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

• Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

�20% biodiesel FAME (fatty acid methyl ester)* �100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Air Conditioning System

• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).

The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).

Paint

• Based on best available knowledge, the maximum allowable concentration, measured in parts per million (PPM), of the following heavy metals in paint are:

– Barium < 0.01%

– Cadmium < 0.01%

– Chromium < 0.01%

– Lead < 0.01%

Sound Performance

ISO 6395:2008 (external) – 99 dB(A)

ISO 6396:2008 (inside cab) – 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

Oils and Fluids

• Caterpillar factory fills with ethylene glycol coolants. Cat Diesel Engine Antifreeze/Coolant (DEAC) and Cat Extended Life Coolant (ELC) can be recycled. Consult your Cat dealer for more information.

• Cat Bio HYDO™ Advanced is an EU Ecolabel approved biodegradable hydraulic oil.

• Additional fluids are likely to be present, please consult the Operations and Maintenance Manual or the Application and Installation guide for complete fluid recommendations and maintenance intervals.

Features and Technology

• The following features and technology may contribute to fuel savings and/or carbon reduction. Features may vary.

Consult your Cat dealer for details.

– �Advanced hydraulic systems balance power and efficiency

– �Smart mode matches machine power to digging requirements automatically

– �Eco mode supports reduced fuel consumption for light applications

– �Utilizing Cat technologies can help increase operating efficiencies

– �Extended service intervals help decrease maintenance costs

– �The latest hydraulic oil filter provides longer life with a 3,000-hour replacement interval

Recycling

• The materials included in machines are categorized as below with approximate weight percentage. Because of variations of product configurations, the following values in the table may vary.

Material Type Weight Percentage Steel 82.98%

Iron 5.36%

Nonferrous Metal 2.57%

Mixed Metal 1.57%

Mixed-Metal and Nonmetal 1.02%

Plastic 1.29%

Rubber 0.19%

Mixed Nonmetallic 0.22%

Fluid 3.18%

Other 1.62%

Uncategorized 0.00%

Total 100%

• A machine with higher recyclability rate will ensure more efficient usage of valuable natural resources and enhance End-of-Life value of the product. According to ISO 16714:2008 (Earthmoving machinery – Recyclability and recoverability – Terminology and calculation method), recyclability rate is defined as percentage by mass (mass fraction in percent) of the new machine potentially able to be recycled, reused or both.

All parts in the bill of material are first evaluated by component type based on a list of components defined by the ISO 16714:2008 and Japan CEMA (Construction Equipment Manufacturers Association) standards. Remaining parts are further evaluated for recyclability based on material type.

Because of variations of product configurations, the following value in the table may vary.

Recyclability – 97%

The following information applies to the machine at the time of final manufacture as configured for sale in the regions covered in this document. The content of this declaration is valid as of the date issued; however, content related to machine features and specifications are subject to change without notice. For additional information, please see the machine’s Operation and Maintenance Manual.

For more information on sustainability in action and our progress, please visit https://www.caterpillar.com/en/company/sustainability.

320 Environmental Declaration

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

© 2024 Caterpillar All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. VisionLink is a trademark of Caterpillar Inc., registered in the United States and in other countries.

AEXQ3758-00 (09-2024)

Build Number: 07H

(N Am)