AEXQ4092_313_GC__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

313 GC

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Air Conditioning System

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Working Ranges and Forces

Blade Working Ranges

Reach Boom Lift Capacities

Reach Boom Lift Capacities – Blade Up

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment Dealer Installed Kits and Attachments 313 GC Environmental Declaration

Engine

Engine Model Cat® C3.6

Net Power

ISO 9249 54.3 kW 73 hp

ISO 9249 (DIN) 74 hp (metric)

Engine Power

ISO 14396 55.4 kW 74 hp

ISO 14396 (DIN) 75 hp (metric)

Bore 98 mm 4 in

Stroke 120 mm 5 in

Displacement 3.6 L 220 in3

Biodiesel Capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

• Engine speed at 2,400 rpm.

(1)Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 11.5 rpm

Maximum Swing Torque 35 kN·m 25,888 lbf·ft

Weights

Operating Weight 13 800 kg 30,400 lb

• Long undercarriage, Reach boom, R3.0 (9'10") stick, General Duty (GD) 0.53 m3 (0.69 yd3) bucket, 700 mm (28") triple grouser shoes and 2470 kg (5,445 lb) counterweight.

Track

Optional Track Shoes Width 700 mm 28 in

Optional Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 500 mm 20 in

Number of Shoes (each side) 46

Number of Track Rollers (each side) 7

Number of Carrier Rollers (each side) 1

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.4 km/h 3.4 mph

Maximum Drawbar Pull 117 kN 26,303 lbf

Air Conditioning System

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent 1.216 metric tonne.

Hydraulic System

Main System – Maximum Flow – Implement

247 L/min 65 gal/min

Maximum Pressure – Equipment – Normal

35 000 kPa 5,075 psi

Maximum Pressure – Travel 35 000 kPa 5,075 psi

Maximum Pressure – Swing 26 000 kPa 3,770 psi

Boom Cylinder – Bore 105 mm 4 in

Boom Cylinder – Stroke 1026 mm 40 in

Stick Cylinder – Bore 115 mm 5 in

Stick Cylinder – Stroke 1147 mm 45 in

Bucket Cylinder – Bore 95 mm 4 in

Bucket Cylinder – Stroke 939 mm 37 in

Service Refill Capacities

Fuel Tank Capacity 258 L 68.2 gal

Cooling System 15 L 4.0 gal

Engine Oil 8 L 2.1 gal

Final Drive (each) 3 L 0.8 gal

Hydraulic System (including tank) 85 L 22.5 gal

Hydraulic Tank 70 L 18.5 gal

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab ISO 10262:1998 Level I

Operator Protective Guards (OPG) (optional)

ISO 10262:1998 Level II

Sound Performance

ISO 6395:2008 (external) 99 dB(A)

ISO 6396:2008 (inside cab) 68 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

313 GC Hydraulic Excavator Specifications

Operating Weights and Ground Pressures

Base Machine Configurations

500 mm (20") Triple Grouser Shoes

500 mm (20") TG Shoe with Rubber Pad

500 mm (20") Rubber Track Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base Frame with Track Rollers and Carrier Rollers 2470 kg (5,445 lb) Counterweight and Long Undercarriage Base Machine Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket

13 300 (29,300)

39.7 (5.8)

13 700 (30,200)

40.9 (5.9)

13 400 (29,500)

40.0 (5.8)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

14 000 (30,900)

41.7 (6.1)

14 400 (31,700)

42.9 (6.2)

14 200 (31,300)

42.3 (6.1)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Base Machine Configurations

600 mm (24") Triple Grouser Shoes

600 mm (24") Rubber Track Shoes

700 mm (28") Triple Grouser Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base Frame with Track Rollers and Carrier Rollers 2470 kg (5,445 lb) Counterweight and Long Undercarriage Base Machine Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket

13 600 (30,000)

33.8 (4.9)

13 700 (30,200)

34.0 (4.9)

13 800 (30,400)

29.4 (4.3)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

14 300 (31,500)

35.5 (5.2)

14 500 (32,000)

36.0 (5.2)

14 600 (32,200)

31.1 (4.5)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine Weight: including upper frame, undercarriage, counterweight, without boom, stick, bucket, boom cylinders, stick cylinder, bucket cylinders, tracks, blade, without 90% fuel tank, operator

With Long Undercarriage 9080 20,000

With Long Undercarriage (blade compatible) 9390 20,700

Track Shoes:

500 mm (20") Triple Grouser Track Shoes 1540 3,390

500 mm (20") Triple Grouser Track Shoes with Rubber Pad 1950 4,310

500 mm (20") Rubber Track Shoes 1670 3,680

600 mm (24") Triple Grouser Track Shoes 1810 4,000

600 mm (24") Rubber Track Shoes 1970 4,340

700 mm (28") Triple Grouser Track Shoes with Additional Steps 2020 4,440

Two Boom Cylinders 240 530

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 270 600

Blades (without lines, cylinders, frame modifications):

2500 mm (8'2") Blade for use with 500 mm (20") Track Shoes 440 960

2600 mm (8'6") Blade for use with 600 mm (24") Track Shoes 490 1,080

2700 mm (8'10") Blade for use with 700 mm (28") Track Shoes 500 1,110

Counterweight:

2470 kg (5,445 lb) Counterweight 2470 5,450

Swing Frame 1240 2,730

Undercarriages:

Base Frame with GD Track Rollers and One Carrier Rollers 2620 5,770

Base Frame with GD Track Rollers and One Carrier Rollers (blade compatible) 2900 6,400

Boom (including lines, pins, stick cylinder):

Reach Boom 4.65 m (15'3") 1030 2,270

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R2.8 (9'2") 650 1,420

Thumb Ready Stick 2.8 m (9'2") 720 1,590

Reach Stick R3.0 (9'10") 650 1,440

Buckets (without linkage,with tips and side cutters):

0.53 m3 (0.69 yd3) GD Bucket 440 970

0.53 m3 (0.69 yd3) Severe Duty (SD) Bucket 500 1,100

0.65 m3 (0.85 yd3) GD Bucket 470 1,030

0.65 m3 (0.85 yd3) SD Bucket 540 1,200

0.76 m3 (0.99 yd3) GD Bucket 510 1,120

Two Bucket Pins 20 50

Quick Coupler:

Pin Grabber Quick Coupler 210 470

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Option Reach Boom

4.65 m (15'3")

Stick Options Thumb Ready/Reach Stick Reach Stick R2.8 (9'2") R3.0 (9'10")

1 Machine Height:*

Top of Cab Height 2810 mm 9'3" 2810 mm 9'3"

Top of OPG Height 2960 mm 9'8" 2960 mm 9'8"

Handrails Height 2810 mm 9'3" 2810 mm 9'3"

With Boom/Stick/Bucket Installed (with stick cylinder lines) 3080 mm 10'1" 3200 mm 10'6"

With Boom/Stick Installed (with stick cylinder lines) 2910 mm 9'6" 3010 mm 9'9"

With Boom Installed (with stick cylinder lines) 2340 mm 7'7" 2340 mm 7'7"

2 Machine Length (without blade):

With Boom/Stick/Bucket Installed (with stick cylinder lines) 7720 mm 25'3" 7690 mm 25'2"

With Boom/Stick Installed (with stick cylinder lines) 7750 mm 25'4" 7740 mm 25'3"

With Boom Installed (with stick cylinder lines) 6830 mm 22'4" 6830 mm 22'4"

Machine Length (with blade, blade rear):

With Boom/Stick/Bucket Installed (with stick cylinder lines) 8000 mm 26'3" 7970 mm 26'2"

With Boom/Stick Installed (with stick cylinder lines) 8030 mm 26'4" 8020 mm 26'3"

With Boom Installed (with stick cylinder lines) 7110 mm 23'3" 7110 mm 23'3"

3 Upperframe Width 2480 mm 8'2" 2480 mm 8'2"

4 Tail Swing Radius – 2470 kg (5,445 lb) Counterweight 2190 mm 7'2" 2190 mm 7'2"

5 Counterweight Clearance 916 mm 3'0" 916 mm 3'0"

6 Ground Clearance 446 mm 1'6" 446 mm 1'6"

7 Length to Center of Rollers 3040 mm 10'0'' 3040 mm 10'0''

8 Track Length 3750 mm 12'4" 3750 mm 12'4"

9 Track Gauge 1990 mm 6'6" 1990 mm 6'6"

10 Track Width/Undercarriage Width:

500 mm (20") Shoes 2490 mm 8'2" 2490 mm 8'2"

600 mm (24") Shoes 2590 mm 8'6" 2590 mm 8'6"

700 mm (28") Shoes (with steps) 2690 mm 8'10" 2690 mm 8'10"

Bucket Type GD GD

Bucket Capacity 0.65 m³ 0.85 yd³ 0.53 m³ 0.69 yd³

Bucket Tip Radius 1240 mm 4'1" 1240 mm 4'1"

*For models with rubber track shoes or rubber pad add 40 mm (1.6") to machine height dimensions

Working Ranges and Forces All dimensions are approximate and may vary depending on bucket selection.

R3.0 (9'10")

R2.8 (9'2")

01234567891011 –1 Meters

Meters

05101520253035 Feet

Feet

Boom Option Reach Boom

4.65 m (15'3")

Stick Options Thumb Ready/Reach Stick Reach Stick R2.8 (9'2") R3.0 (9'10")

1 Maximum Digging Depth 5840 mm 19'2" 6040 mm 19'10"

2 Maximum Reach at Ground Line 8470 mm 27'9" 8660 mm 28'5"

3 Maximum Cutting Height 8710 mm 28'7" 8830 mm 29'0"

4 Maximum Loading Height 6300 mm 20'8" 6420 mm 21'1"

5 Minimum Loading Height 1800 mm 5'11" 1600 mm 5'3"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 5650 mm 18'6" 5860 mm 19'3"

7 Maximum Vertical Wall Digging Depth 5000 mm 16'5" 5190 mm 17'0"

Minimum Working Equipment Radius 2540 mm 8'4" 2570 mm 8'5"

Bucket Digging Force (ISO) 98.67 kN 22,180 lbf 98.67 kN 22,180 lbf

Stick Digging Force (ISO) 62.34 kN 14,010 lbf 59.29 kN 13,330 lbf

Bucket Type GD GD

Bucket Capacity 0.65 m³ 0.85 yd³ 0.53 m³ 0.69 yd³

Bucket Tip Radius 1240 mm 4'1" 1240 mm 4'1"

Blade Working Ranges All dimensions are approximate and may vary depending on bucket selection.

Blade Options 2500 mm 2600 mm 2700 mm (8'2") (8'6") (8'10")

1 Blade Height 616 mm 2'0" 616 mm 2'0" 616 mm 2'0"

2 Maximum Lowering Depth from Ground 550 mm 1'10" 550 mm 1'10" 550 mm 1'10"

3 Maximum Raising Height above Ground 1018 mm 3'4" 1018 mm 3'4" 1018 mm 3'4" θ Approach Angle 26° 26° 26°

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") Triple Grouser Shoes 3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2550 *2250 2100 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,400 *4,900 4,600 21'10"

3.0 m kg *5750 *5750 *4350 3800 3750 2450 *2250 1800 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,150 8,100 5,250 *4,900 4,000 23'7"

1.5 m kg *8550 6400 *5450 3550 3650 2350 *2350 1700 7.36

5.0 ft lb *18,400 13,750 *11,750 7,600 7,800 5,000 *5,150 3,750 24'1"

0 m kg *6950 6000 5450 3350 3550 2250 *2600 1750 7.20 0 ft lb *16,050 12,850 11,700 7,150 7,600 4,800 *5,750 3,800 23'7"

–1.5 m kg *4500 *4500 *9450 5900 5350 3250 3500 2200 3000 1900 6.71 –5.0 ft lb *10,100 *10,100 *21,000 12,650 11,450 6,950 7,500 4,700 6,600 4,150 21'11" –3.0 m kg *8000 *8000 *8600 5950 5350 3250 3700 2350 5.78

–10.0 ft lb *18,000 *18,000 *18,500 12,800 11,500 7,000 8,250 5,150 18'9" –4.5 m kg *5900 *5900 *4050 3850 4.13

–15.0 ft lb *10,050 9,900 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 600 mm (24") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2500 *2250 2050 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,350 *4,900 4,550 21'10"

3.0 m kg *5750 *5750 *4350 3750 3700 2400 *2250 1800 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,050 8,000 5,200 *4,900 3,950 23'7"

1.5 m kg *8550 6300 *5450 3500 3600 2300 *2350 1700 7.36

5.0 ft lb *18,400 13,550 *11,750 7,500 7,700 4,950 *5,150 3,700 24'1"

0 m kg *6950 5900 5350 3300 3500 2200 *2600 1700 7.20 0 ft lb *16,050 12,650 11,550 7,050 7,500 4,700 *5,750 3,750 23'7"

–1.5 m kg *4500 *4500 *9450 5800 5250 3200 3450 2150 2950 1850 6.71 –5.0 ft lb *10,100 *10,100 *21,000 12,450 11,300 6,850 7,350 4,600 6,500 4,100 21'11" –3.0 m kg *8000 *8000 *8600 5900 5300 3200 3650 2300 5.78

–10.0 ft lb *18,000 *18,000 *18,500 12,600 11,350 6,900 8,150 5,100 18'9" –4.5 m kg *5900 *5900 *4050 3800 4.13

–15.0 ft lb *10,050 9,800 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2450 *2250 2000 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,250 *4,900 4,450 21'10"

3.0 m kg *5750 *5750 *4350 3700 3650 2350 *2250 1750 7.21

10.0 ft lb *12,350 *12,350 *9,450 7,950 7,850 5,100 *4,900 3,850 23'7"

1.5 m kg *8550 6200 *5450 3400 3550 2250 *2350 1650 7.36

5.0 ft lb *18,400 13,300 *11,750 7,350 7,550 4,850 *5,150 3,600 24'1"

0 m kg *6950 5800 5250 3200 3400 2150 *2600 1650 7.20 0 ft lb *16,050 12,400 11,300 6,900 7,350 4,650 *5,750 3,650 23'7"

–1.5 m kg *4500 *4500 *9450 5700 5150 3100 3350 2100 2900 1850 6.71 –5.0 ft lb *10,100 *10,100 *21,000 12,200 11,050 6,700 7,200 4,550 6,350 4,000 21'11" –3.0 m kg *8000 *8000 *8600 5750 5200 3150 3600 2250 5.78

–10.0 ft lb *18,000 *18,000 *18,500 12,350 11,100 6,750 7,950 5,000 18'9" –4.5 m kg *5900 *5900 *4050 3750 4.13

–15.0 ft lb *10,050 9,600 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2500 *2250 2100 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,400 *4,900 4,600 21'10"

3.0 m kg *5750 *5750 *4350 3800 3750 2450 *2250 1800 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,150 8,050 5,200 *4,900 4,000 23'7"

1.5 m kg *8550 6350 *5450 3500 3650 2300 *2350 1700 7.36

5.0 ft lb *18,400 13,650 *11,750 7,550 7,800 5,000 *5,150 3,750 24'1"

0 m kg *6950 5950 5450 3300 3500 2250 *2600 1700 7.20 0 ft lb *16,050 12,750 11,650 7,100 7,550 4,750 *5,750 3,750 23'7"

–1.5 m kg *4500 *4500 *9450 5850 5300 3200 3450 2200 3000 1900 6.71 –5.0 ft lb *10,100 *10,100 *21,000 12,600 11,400 6,900 7,450 4,650 6,550 4,150 21'11" –3.0 m kg *8000 *8000 *8600 5950 5350 3250 3700 2350 5.78

–10.0 ft lb *18,000 *18,000 *18,500 12,750 11,450 6,950 8,200 5,150 18'9" –4.5 m kg *5900 *5900 *4050 3850 4.13

–15.0 ft lb *10,050 9,900 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") �Triple Grouser Shoes 3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2550 *2200 2100 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,400 *4,850 4,600 21'10"

3.0 m kg *5700 *5700 *4300 3800 *3750 2450 *2200 1800 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,200 8,100 5,250 *4,850 4,000 23'7"

1.5 m kg *8500 6400 *5400 3550 3650 2350 *2350 1700 7.36

5.0 ft lb *18,250 13,800 *11,600 7,600 7,850 5,000 *5,100 3,750 24'1"

0 m kg *6900 6000 5450 3350 3550 2250 *2600 1700 7.20 0 ft lb *16,000 12,850 11,700 7,150 7,600 4,750 *5,650 3,750 23'7"

–1.5 m kg *4500 *4500 *9400 5900 5350 3250 3500 2200 3000 1900 6.71 –5.0 ft lb *10,050 *10,050 *20,850 12,650 11,500 6,950 7,500 4,650 6,550 4,150 21'11" –3.0 m kg *7950 *7950 *8500 6000 5400 3250 3700 2350 5.78

–10.0 ft lb *17,950 *17,950 *18,350 12,850 11,550 7,000 8,250 5,150 18'9" –4.5 m kg *5850 *5850 *4000 3900 4.13

–15.0 ft lb *9,900 *9,900 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 600 mm (24") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2500 *2200 2050 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,350 *4,850 4,550 21'10"

3.0 m kg *5700 *5700 *4300 3750 3750 2400 *2200 1800 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,100 8,000 5,150 *4,850 3,900 23'7"

1.5 m kg *8500 6350 *5400 3500 3600 2300 *2350 1700 7.36

5.0 ft lb *18,250 13,600 *11,600 7,500 7,700 4,900 *5,100 3,650 24'1"

0 m kg *6900 5900 5400 3300 3500 2200 *2600 1700 7.20 0 ft lb *16,000 12,700 11,550 7,050 7,500 4,700 *5,650 3,700 23'7"

–1.5 m kg *4500 *4500 *9400 5800 5300 3200 3450 2150 2950 1850 6.71 –5.0 ft lb *10,050 *10,050 *20,850 12,500 11,300 6,850 7,350 4,600 6,450 4,050 21'11" –3.0 m kg *7950 *7950 *8500 5900 5300 3200 3650 2300 5.78

–10.0 ft lb *17,950 *17,950 *18,350 12,650 11,400 6,900 8,150 5,100 18'9" –4.5 m kg *5850 *5850 *4000 3850 4.13

–15.0 ft lb *9,900 9,850 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm �(20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2450 *2200 2000 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,250 *4,850 4,450 21'10"

3.0 m kg *5700 *5700 *4300 3700 3650 2350 *2200 1750 7.21

10.0 ft lb *12,200 *12,200 *9,350 7,950 7,850 5,100 *4,850 3,850 23'7"

1.5 m kg *8500 6200 *5400 3450 3550 2250 *2350 1650 7.36

5.0 ft lb *18,250 13,350 *11,600 7,350 7,550 4,850 *5,100 3,600 24'1"

0 m kg *6900 5800 5300 3200 3400 2150 *2600 1650 7.20 0 ft lb *16,000 12,450 11,350 6,900 7,350 4,600 *5,650 3,650 23'7"

–1.5 m kg *4500 *4500 *9400 5700 5150 3100 3350 2100 2900 1800 6.71 –5.0 ft lb *10,050 *10,050 *20,850 12,250 11,100 6,700 7,200 4,500 6,350 4,000 21'11" –3.0 m kg *7950 *7950 *8500 5800 5200 3150 3600 2250 5.78

–10.0 ft lb *17,950 *17,950 *18,350 12,400 11,150 6,750 8,000 5,000 18'9" –4.5 m kg *5850 *5850 *4000 3750 4.13

–15.0 ft lb *9,900 9,650 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2500 *2200 2050 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,400 *4,850 4,600 21'10"

3.0 m kg *5700 *5700 *4300 3800 *3750 2450 *2200 1800 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,150 8,100 5,200 *4,850 3,950 23'7"

1.5 m kg *8500 6400 *5400 3500 3650 2300 *2350 1700 7.36

5.0 ft lb *18,250 13,750 *11,600 7,550 7,800 4,950 *5,100 3,700 24'1"

0 m kg *6900 5950 5450 3300 3500 2200 *2600 1700 7.20 0 ft lb *16,000 12,800 11,700 7,100 7,550 4,750 *5,650 3,750 23'7"

–1.5 m kg *4500 *4500 *9400 5900 5350 3200 3450 2150 2950 1900 6.71 –5.0 ft lb *10,050 *10,050 *20,850 12,600 11,450 6,900 7,450 4,650 6,550 4,100 21'11" –3.0 m kg *7950 *7950 *8500 5950 5350 3250 3700 2300 5.78

–10.0 ft lb *17,950 *17,950 *18,350 12,800 11,500 6,950 8,250 5,150 18'9" –4.5 m kg *5850 *5850 *4000 3850 4.13

–15.0 ft lb *9,900 *9,900 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 700 mm (28") Triple Grouser Shoes 3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2550 *2050 2000 6.92

15.0 ft lb *7,300 5,450 *4,500 4,400 22'6"

3.0 m kg *5350 *5350 *4200 3850 *3700 2450 *2050 1750 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,250 *8,000 5,300 *4,500 3,850 24'2"

1.5 m kg *8200 6450 *5300 3550 3650 2350 *2400 1650 *2150 1650 7.55

5.0 ft lb *17,650 13,900 *11,400 7,650 7,850 5,050 *4,750 3,600 24'9"

0 m kg *7250 6000 5450 3350 3550 2250 *2400 1650 7.40 0 ft lb *16,750 12,900 11,750 7,150 7,600 4,800 *5,250 3,650 24'3"

–1.5 m kg *4350 *4350 *9200 5900 5350 3250 3500 2200 *2850 1800 6.91 –5.0 ft lb *9,700 *9,700 *21,000 12,600 11,450 6,950 7,450 4,700 *6,250 3,950 22'7" –3.0 m kg *7450 *7450 *8800 5950 5350 3250 3500 2200 3500 2200 6.02

–10.0 ft lb *16,800 *16,800 *19,050 12,750 11,450 6,950 7,750 4,850 19'7" –4.5 m kg *6400 6150 *4000 3400 4.48

–15.0 ft lb *13,550 13,250 *8,800 7,750 14'4"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 600 mm (24") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2500 *2050 1950 6.92

15.0 ft lb *7,300 5,400 *4,500 4,350 22'6"

3.0 m kg *5350 *5350 *4200 3800 *3700 2450 *2050 1700 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,150 *8,000 5,200 *4,500 3,800 24'2"

1.5 m kg *8200 6400 *5300 3500 3600 2300 *2400 1650 *2150 1650 7.55

5.0 ft lb *17,650 13,750 *11,400 7,550 7,750 4,950 *4,750 3,550 24'9"

0 m kg *7250 5900 5400 3300 3500 2200 *2400 1650 7.40 0 ft lb *16,750 12,700 11,550 7,050 7,500 4,750 *5,250 3,600 24'3"

–1.5 m kg *4350 *4350 *9200 5800 5250 3200 3450 2150 2800 1800 6.91 –5.0 ft lb *9,700 *9,700 *21,000 12,450 11,300 6,850 7,350 4,600 6,200 3,900 22'7" –3.0 m kg *7450 *7450 *8800 5850 5250 3200 3450 2200 3450 2150 6.02

–10.0 ft lb *16,800 *16,800 *19,050 12,550 11,300 6,850 7,650 4,800 19'7" –4.5 m kg *6400 6050 *4000 3350 4.48

–15.0 ft lb *13,550 13,050 *8,800 7,650 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2500 *2050 1950 6.92

15.0 ft lb *7,300 5,300 *4,500 4,250 22'6"

3.0 m kg *5350 *5350 *4200 3700 3650 2400 *2050 1700 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,000 7,850 5,100 *4,500 3,700 24'2"

1.5 m kg *8200 6250 *5300 3450 3550 2250 *2400 1600 *2150 1600 7.55

5.0 ft lb *17,650 13,500 *11,400 7,400 7,600 4,850 *4,750 3,500 24'9"

0 m kg *7250 5800 5300 3250 3400 2150 *2400 1600 7.40 0 ft lb *16,750 12,450 11,350 6,950 7,350 4,650 *5,250 3,500 24'3"

–1.5 m kg *4350 *4350 *9200 5700 5150 3100 3350 2100 2750 1750 6.91 –5.0 ft lb *9,700 *9,700 *21,000 12,200 11,050 6,700 7,200 4,500 6,050 3,850 22'7" –3.0 m kg *7450 *7450 *8800 5750 5150 3100 3400 2150 3350 2100 6.02

–10.0 ft lb *16,800 *16,800 *19,050 12,300 11,100 6,700 7,500 4,700 19'7" –4.5 m kg *6400 5950 *4000 3300 4.48

–15.0 ft lb *13,550 12,800 *8,800 7,500 14'4"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2550 *2050 2000 6.92

15.0 ft lb *7,300 5,450 *4,500 4,400 22'6"

3.0 m kg *5350 *5350 *4200 3800 *3700 2450 *2050 1750 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,200 *8,000 5,250 *4,500 3,800 24'2"

1.5 m kg *8200 6450 *5300 3550 3650 2350 *2400 1650 *2150 1650 7.55

5.0 ft lb *17,650 13,850 *11,400 7,600 7,800 5,000 *4,750 3,600 24'9"

0 m kg *7250 6000 5450 3300 3550 2250 *2400 1650 7.40 0 ft lb *16,750 12,850 11,700 7,150 7,550 4,800 *5,250 3,600 24'3"

–1.5 m kg *4350 *4350 *9200 5850 5300 3200 3450 2150 *2850 1800 6.91 –5.0 ft lb *9,700 *9,700 *21,000 12,550 11,400 6,900 7,450 4,650 *6,250 3,950 22'7" –3.0 m kg *7450 *7450 *8800 5900 5300 3200 3500 2200 3500 2200 6.02

–10.0 ft lb *16,800 *16,800 *19,050 12,700 11,400 6,900 7,700 4,850 19'7" –4.5 m kg *6400 6150 *4000 3400 4.48

–15.0 ft lb *13,550 13,200 *8,800 7,750 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") Triple Grouser Shoes 3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2650 *2250 2200 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,700 *4,900 4,850 21'10"

3.0 m kg *5750 *5750 *4350 4000 3750 2600 *2250 1900 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,550 8,050 5,500 *4,900 4,200 23'7"

1.5 m kg *8550 6700 *5450 3700 3650 2450 *2350 1800 7.36

5.0 ft lb *18,400 14,400 *11,750 8,000 7,800 5,300 *5,150 3,950 24'1"

0 m kg *6950 6300 5400 3500 3500 2350 *2600 1850 7.20 0 ft lb *16,050 13,500 11,650 7,550 7,550 5,050 *5,750 4,000 23'7"

–1.5 m kg *4500 *4500 *9450 6200 5300 3400 3450 2300 2950 2000 6.71 –5.0 ft lb *10,100 *10,100 *21,000 13,350 11,400 7,350 7,450 4,950 6,550 4,400 21'11" –3.0 m kg *8000 *8000 *8600 6300 5350 3450 3700 2450 5.78

–10.0 ft lb *18,000 *18,000 *18,500 13,500 11,450 7,400 8,200 5,450 18'9" –4.5 m kg *5900 *5900 *4050 *4050 4.13

–15.0 ft lb *10,050 *10,050 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.8 m (9'2") 4.65 m (15'3") 600 mm (24") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2600 *2250 2150 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,600 *4,900 4,800 21'10"

3.0 m kg *5750 *5750 *4350 3950 3700 2550 *2250 1900 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,450 7,950 5,450 *4,900 4,150 23'7"

1.5 m kg *8550 6600 *5450 3650 3600 2450 *2350 1800 7.36

5.0 ft lb *18,400 14,250 *11,750 7,900 7,700 5,200 *5,150 3,900 24'1"

0 m kg *6950 6200 5350 3450 3450 2350 *2600 1800 7.20 0 ft lb *16,050 13,350 11,450 7,450 7,450 5,000 *5,750 3,950 23'7"

–1.5 m kg *4500 *4500 *9450 6150 5250 3350 3400 2300 2950 1950 6.71 –5.0 ft lb *10,100 *10,100 *21,000 13,150 11,250 7,250 7,350 4,900 6,450 4,350 21'11" –3.0 m kg *8000 *8000 *8600 6200 5250 3400 3650 2450 5.78

–10.0 ft lb *18,000 *18,000 *18,500 13,300 11,300 7,250 8,100 5,400 18'9" –4.5 m kg *5900 *5900 *4050 4000 4.13

–15.0 ft lb *10,050 *10,050 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2550 *2250 2100 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,500 *4,900 4,700 21'10"

3.0 m kg *5750 *5750 *4350 3850 3650 2500 *2250 1850 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,300 7,800 5,350 *4,900 4,050 23'7"

1.5 m kg *8550 6500 *5450 3600 3500 2350 *2350 1750 7.36

5.0 ft lb *18,400 13,950 *11,750 7,700 7,550 5,100 *5,150 3,800 24'1"

0 m kg *6950 6100 5250 3400 3400 2250 *2600 1750 7.20 0 ft lb *16,050 13,050 11,250 7,250 7,300 4,900 *5,750 3,850 23'7"

–1.5 m kg *4500 *4500 *9450 6000 5150 3300 3350 2250 2850 1950 6.71 –5.0 ft lb *10,100 *10,100 *21,000 12,850 11,050 7,050 7,200 4,800 6,300 4,250 21'11" –3.0 m kg *8000 *8000 *8600 6050 5150 3300 3600 2400 5.78

–10.0 ft lb *18,000 *18,000 *18,500 13,000 11,100 7,100 7,950 5,250 18'9" –4.5 m kg *5900 *5900 *4050 3950 4.13

–15.0 ft lb *10,050 *10,050 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2900 *2900 4.16

25.0 ft lb

6.0 m kg *2400 *2400 5.79

20.0 ft lb *5,250 *5,250 18'8"

4.5 m kg *3500 *3500 *3500 2650 *2250 2200 6.71

15.0 ft lb *7,650 *7,650 *7,550 5,650 *4,900 4,800 21'10"

3.0 m kg *5750 *5750 *4350 3950 3750 2550 *2250 1900 7.21

10.0 ft lb *12,350 *12,350 *9,450 8,500 8,050 5,500 *4,900 4,200 23'7"

1.5 m kg *8550 6650 *5450 3700 3600 2450 *2350 1800 7.36

5.0 ft lb *18,400 14,300 *11,750 7,900 7,750 5,250 *5,150 3,950 24'1"

0 m kg *6950 6250 5400 3500 3500 2350 *2600 1800 7.20 0 ft lb *16,050 13,400 11,600 7,450 7,550 5,000 *5,750 4,000 23'7"

–1.5 m kg *4500 *4500 *9450 6150 5300 3400 3450 2300 2950 2000 6.71 –5.0 ft lb *10,100 *10,100 *21,000 13,200 11,350 7,250 7,400 4,900 6,500 4,350 21'11" –3.0 m kg *8000 *8000 *8600 6250 5300 3400 3700 2450 5.78

–10.0 ft lb *18,000 *18,000 *18,500 13,400 11,400 7,300 8,200 5,400 18'9" –4.5 m kg *5900 *5900 *4050 4050 4.13

–15.0 ft lb *10,050 *10,050 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") Triple Grouser Shoes 3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2650 *2200 2200 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,700 *4,850 4,850 21'10"

3.0 m kg *5700 *5700 *4300 4000 *3750 2600 *2200 1900 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,600 8,050 5,500 *4,850 4,200 23'7"

1.5 m kg *8500 *6750 *5400 3700 3650 2450 *2350 1800 7.36

5.0 ft lb *18,250 14,500 *11,600 8,000 7,800 5,250 *5,100 3,950 24'1"

0 m kg *6900 6300 5450 3500 3500 2350 *2600 1800 7.20 0 ft lb *16,000 13,550 11,650 7,550 7,550 5,050 *5,650 4,000 23'7"

–1.5 m kg *4500 *4500 *9400 6250 5350 3400 3450 2300 2950 2000 6.71 –5.0 ft lb *10,050 *10,050 *20,850 13,350 11,450 7,350 7,450 4,950 6,550 4,400 21'11" –3.0 m kg *7950 *7950 *8500 6300 5350 3450 3700 2450 5.78

–10.0 ft lb *17,950 *17,950 *18,350 13,550 11,500 7,400 8,250 5,450 18'9" –4.5 m kg *5850 *5850 *4000 *4000 4.13

–15.0 ft lb *9,900 *9,900 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.8 m (9'2") 4.65 m (15'3") 600 mm (28") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2650 *2200 2150 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,600 *4,850 4,800 21'10"

3.0 m kg *5700 *5700 *4300 3950 3700 2550 *2200 1900 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,500 7,950 5,450 *4,850 4,150 23'7"

1.5 m kg *8500 6650 *5400 3650 3600 2400 *2350 1800 7.36

5.0 ft lb *18,250 14,300 *11,600 7,900 7,700 5,200 *5,100 3,900 24'1"

0 m kg *6900 6250 5350 3450 3450 2300 *2600 1800 7.20 0 ft lb *16,000 13,350 11,500 7,450 7,450 4,950 *5,650 3,950 23'7"

–1.5 m kg *4500 *4500 *9400 6150 5250 3350 3400 2250 2950 1950 6.71 –5.0 ft lb *10,050 *10,050 *20,850 13,150 11,250 7,200 7,350 4,850 6,450 4,300 21'11" –3.0 m kg *7950 *7950 *8500 6200 5300 3400 3650 2450 5.78

–10.0 ft lb *17,950 *17,950 *18,350 13,350 11,350 7,250 8,100 5,400 18'9" –4.5 m kg *5850 *5850 *4000 *4000 4.13

–15.0 ft lb *9,900 *9,900 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2550 *2200 2100 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,500 *4,850 4,700 21'10"

3.0 m kg *5700 *5700 *4300 3850 3650 2500 *2200 1850 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,300 7,800 5,350 *4,850 4,050 23'7"

1.5 m kg *8500 6500 *5400 3600 3500 2350 *2350 1750 7.36

5.0 ft lb *18,250 14,000 *11,600 7,750 7,550 5,100 *5,100 3,800 24'1"

0 m kg *6900 6100 5250 3400 3400 2250 *2600 1750 7.20 0 ft lb *16,000 13,050 11,300 7,250 7,300 4,850 *5,650 3,850 23'7"

–1.5 m kg *4500 *4500 *9400 6000 5150 3300 3350 2200 2850 1900 6.71 –5.0 ft lb *10,050 *10,050 *20,850 12,900 11,050 7,050 7,200 4,750 6,300 4,200 21'11" –3.0 m kg *7950 *7950 *8500 6100 5200 3300 3600 2350 5.78

–10.0 ft lb *17,950 *17,950 *18,350 13,050 11,100 7,100 7,950 5,250 18'9" –4.5 m kg *5850 *5850 *4000 3950 4.13

–15.0 ft lb *9,900 *9,900 12'1"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R2.8 TRS

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft m ft/in

7.5 m kg *2850 *2850 4.16

25.0 ft lb

6.0 m kg *2350 *2350 5.79

20.0 ft lb *5,200 *5,200 18'8"

4.5 m kg *3500 *3500 *3450 2650 *2200 2150 6.71

15.0 ft lb *7,550 *7,550 *7,500 5,650 *4,850 4,800 21'10"

3.0 m kg *5700 *5700 *4300 3950 *3750 2550 *2200 1900 7.21

10.0 ft lb *12,200 *12,200 *9,350 8,550 8,050 5,450 *4,850 4,150 23'7"

1.5 m kg *8500 6700 *5400 3700 3650 2450 *2350 1800 7.36

5.0 ft lb *18,250 14,350 *11,600 7,950 7,800 5,200 *5,100 3,900 24'1"

0 m kg *6900 6250 5400 3500 3500 2350 *2600 1800 7.20 0 ft lb *16,000 13,450 11,650 7,450 7,550 5,000 *5,650 3,950 23'7"

–1.5 m kg *4500 *4500 *9400 6200 5300 3400 3450 2300 2950 2000 6.71 –5.0 ft lb *10,050 *10,050 *20,850 13,250 11,400 7,250 7,450 4,900 6,500 4,350 21'11" –3.0 m kg *7950 *7950 *8500 6250 5350 3400 3700 2450 5.78

–10.0 ft lb *17,950 *17,950 *18,350 13,400 11,450 7,300 8,200 5,400 18'9" –4.5 m kg *5850 *5850 *4000 *4000 4.13

–15.0 ft lb *9,900 *9,900 12'1"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2700 mm (8'8") Blade

3.0 m (9'10") 4.65 m (15'3") 700 mm (28") Triple Grouser Shoes 3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2700 *2050 *2050 6.92

15.0 ft lb *7,300 5,750 *4,500 *4,500 22'6"

3.0 m kg *5350 *5350 *4200 4000 *3700 2600 *2050 1850 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,650 *8,000 5,550 *4,500 4,050 24'2"

1.5 m kg *8200 6800 *5300 3750 3650 2450 *2400 1750 *2150 1750 7.55

5.0 ft lb *17,650 14,600 *11,400 8,050 7,800 5,300 *4,750 3,850 24'9"

0 m kg *7250 6350 5450 3500 3500 2350 *2400 1750 7.40 0 ft lb *16,750 13,600 11,650 7,550 7,550 5,050 *5,250 3,850 24'3"

–1.5 m kg *4350 *4350 *9200 6200 5300 3400 3450 2300 *2850 1900 6.91 –5.0 ft lb *9,700 *9,700 *21,000 13,300 11,400 7,350 7,450 4,950 *6,250 4,200 22'7" –3.0 m kg *7450 *7450 *8800 6250 5300 3400 3500 2350 3500 2350 6.02

–10.0 ft lb *16,800 *16,800 *19,050 13,450 11,400 7,350 7,700 5,150 19'7" –4.5 m kg *6400 *6400 *4000 3600 4.48

–15.0 ft lb *13,550 *13,550 *8,800 8,200 14'4"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

3.0 m (9'10") 4.65 m (15'3") 600 mm (24") �Triple Grouser Shoes and 600 mm (24") Rubber Track Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2650 *2050 *2050 6.92

15.0 ft lb *7,300 5,650 *4,500 *4,500 22'6"

3.0 m kg *5350 *5350 *4200 3950 *3700 2550 *2050 1800 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,500 8,000 5,500 *4,500 4,000 24'2"

1.5 m kg *8200 6700 *5300 3700 3600 2450 *2400 1750 *2150 1700 7.55

5.0 ft lb *17,650 14,400 *11,400 7,950 7,700 5,250 *4,750 3,750 24'9"

0 m kg *7250 6250 5350 3450 3450 2350 *2400 1750 7.40 0 ft lb *16,750 13,400 11,500 7,450 7,450 5,000 *5,250 3,800 24'3"

–1.5 m kg *4350 *4350 *9200 6100 5250 3350 3400 2250 2800 1900 6.91 –5.0 ft lb *9,700 *9,700 *21,000 13,100 11,250 7,200 7,300 4,900 6,150 4,150 22'7" –3.0 m kg *7450 *7450 *8800 6150 5250 3350 3450 2300 3450 2300 6.02

–10.0 ft lb *16,800 *16,800 *19,050 13,250 11,250 7,250 7,600 5,050 19'7" –4.5 m kg *6400 6400 *4000 3550 4.48

–15.0 ft lb *13,550 *13,550 *8,800 8,100 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") �Triple Grouser Shoes and 500 mm (20") Rubber Track Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2600 *2050 2050 6.92

15.0 ft lb *7,300 5,550 *4,500 4,500 22'6"

3.0 m kg *5350 *5350 *4200 3900 3650 2500 *2050 1800 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,350 7,850 5,350 *4,500 3,900 24'2"

1.5 m kg *8200 6550 *5300 3600 3550 2400 *2400 1700 *2150 1700 7.55

5.0 ft lb *17,650 14,150 *11,400 7,750 7,550 5,100 *4,750 3,700 24'9"

0 m kg *7250 6100 5250 3400 3400 2300 *2400 1700 7.40 0 ft lb *16,750 13,100 11,300 7,300 7,300 4,900 *5,250 3,700 24'3"

–1.5 m kg *4350 *4350 *9200 6000 5150 3300 3350 2200 2750 1850 6.91 –5.0 ft lb *9,700 *9,700 *21,000 12,850 11,050 7,050 7,200 4,750 6,050 4,050 22'7" –3.0 m kg *7450 *7450 *8800 6050 5150 3300 3350 2250 3350 2250 6.02

–10.0 ft lb *16,800 *16,800 *19,050 12,950 11,050 7,050 7,450 4,950 19'7" –4.5 m kg *6400 6250 *4000 3450 4.48

–15.0 ft lb *13,550 13,450 *8,800 7,900 14'4"

Reach Boom Lift Capacities – Counterweight: 2470 kg (5,445 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

3.0 m (9'10") 4.65 m (15'3") 500 mm �(20") Triple Grouser Shoes with Rubber Pad

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft m ft/in

7.5 m kg *2600 *2600 4.49

25.0 ft lb *5,850 *5,850 14'1"

6.0 m kg *2250 *2250 *2200 *2200 6.03

20.0 ft lb *4,850 *4,850 19'6"

4.5 m kg *3350 2650 *2050 *2050 6.92

15.0 ft lb *7,300 5,700 *4,500 *4,500 22'6"

3.0 m kg *5350 *5350 *4200 4000 *3700 2550 *2050 1850 7.40

10.0 ft lb *11,450 *11,450 *9,050 8,550 *8,000 5,500 *4,500 4,000 24'2"

1.5 m kg *8200 6750 *5300 3700 3650 2450 *2400 1750 *2150 1750 7.55

5.0 ft lb *17,650 14,500 *11,400 8,000 7,800 5,250 *4,750 3,800 24'9"

0 m kg *7250 6300 5400 3500 3500 2350 *2400 1750 7.40 0 ft lb *16,750 13,450 11,650 7,500 7,550 5050 *5,250 3,800 24'3"

–1.5 m kg *4350 *4350 *9200 6150 5300 3400 3450 2300 *2850 1900 6.91 –5.0 ft lb *9,700 *9,700 *21,000 13,200 11,350 7,250 7,400 4,900 *6,250 4,150 22'7" –3.0 m kg *7450 *7450 *8800 6200 5300 3400 3500 2300 3450 2300 6.02

–10.0 ft lb *16,800 *16,800 *19,050 13,300 11,400 7,300 7,700 5,100 19'7" –4.5 m kg *6400 *6400 *4000 3550 4.48

–15.0 ft lb *13,550 *13,550 *8,800 8,100 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Bucket Specifications and Compatibility

2470 kg (5,445 lb) Counterweight

Reach Boom mm in m3 yd3 kg lb % R2.8 (9'2") R2.8 TR (9'2") R3.0 (9'10")

Pin-On (No Quick Coupler)

General Duty 312 450 18 0.20 0.27 268 591 100

312 600 24 0.31 0.40 320 706 100

312 750 30 0.41 0.54 369 814 100

312 900 36 0.53 0.69 420 927 100

312 1050 42 0.65 0.84 468 1,031 100

General Duty – Wide Tip 312 450 18 0.27 0.36 317 700 100

312 600 24 0.41 0.53 372 821 100

312 750 30 0.55 0.72 425 936 101

312 900 36 0.71 0.92 478 1,053 100

312 1050 42 0.86 1.13 530 1,168 100

Severe Duty 312 600 24 0.31 0.40 372 820 90

312 750 30 0.41 0.54 433 954 90

312 900 36 0.53 0.69 495 1,090 90

314 1050 42 0.65 0.84 540 1,190 90

Clean Up 312 1500 60 1.02 1.33 630 1,389 100

Ditch Cleaning 312 1200 48 0.57 0.74 388 855 100

312 1500 60 0.74 0.97 455 1,003 100

Ditch Cleaning Tilt 312 1200 48 0.48 0.63 563 1,240 100

312 1500 60 0.57 0.75 646 1,424 100

Maximum load pin-on (payload + bucket) kg 1710 1680 1640 lb 3,774 3,704 3,612

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

(continued on next page)

Bucket Specifications and Compatibility (continued)

2470 kg (5,445 lb) Counterweight

Reach Boom mm in m3 yd3 kg lb % R2.8 (9'2") R2.8 TR (9'2") R3.0 (9'10")

With Cat Pin Grabber Coupler

General Duty 312 450 18 0.20 0.27 268 591 100

312 600 24 0.31 0.40 320 706 100

312 750 30 0.41 0.54 369 814 100

312 900 36 0.53 0.69 420 927 100

312 1050 42 0.65 0.84 468 1,031 100

312 1200 48 0.76 1.00 508 1,119 100

General Duty – Wide Tip 312 450 18 0.27 0.36 317 700 100

312 600 24 0.41 0.53 372 821 100

312 750 30 0.55 0.72 425 936 101

312 900 36 0.71 0.92 478 1,053 100

312 1050 42 0.86 1.13 530 1,168 100

312 1200 48 1.02 1.33 582 1,283 100 X

Severe Duty 312 600 24 0.31 0.40 372 820 90

312 750 30 0.41 0.54 433 954 90

312 900 36 0.53 0.69 495 1,090 90

312 1050 42 0.65 0.84 540 1,190 90

Clean Up 312 1500 60 1.02 1.33 630 1,389 100 X

Ditch Cleaning 312 1200 48 0.57 0.74 388 855 100

312 1500 60 0.74 0.97 455 1,003 100

Ditch Cleaning Tilt 312…