AEXQ4095_315_GC__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

315 GC

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Working Ranges and Forces

Blade Working Ranges

Reach Boom Lift Capacities

Reach Boom Lift Capacities – Blade Up

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment Dealer Installed Kits and Attachments 315 GC Environmental Declaration

Engine

Engine Model Cat® C3.6

Net Power

ISO 9249 73.3 kW 98 hp

ISO 9249 (DIN) 100 hp (metric)

Engine Power

ISO 14396 74.4 kW 100 hp

ISO 14396 (DIN) 101 hp (metric)

Bore 98 mm 4 in

Stroke 120 mm 5 in

Displacement 3.6 L 220 in3

Biodiesel capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

at the time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

• Engine speed at 2,400 rpm.

(1)�Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 11.5 rpm

Maximum Swing Torque 35 kN·m 25,815 lbf·ft

Weights

Operating Weight 15 400 kg 33,900 lb

• Long undercarriage, Reach boom, R3.0 (9'10") stick, General Duty (GD) 0.53 m3 (0.69 yd3) bucket, 700 mm (28") triple grouser shoes and 3.83 mt (8,440 lb) counterweight.

Track

Standard Track Shoes Width 700 mm 28 in

Optional Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 500 mm 20 in

Number of Shoes (each side) 46

Number of Track Rollers (each side) 7

Number of Carrier Rollers (each side) 1

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.4 km/h 3.4 mph

Maximum Drawbar Pull 117 kN 26,303 lbf

Hydraulic System

Main System – Maximum Flow – Implement

247 L/min 65 gal/min

Maximum Pressure – Equipment – Normal

35 000 kPa 5,075 psi

Maximum Pressure – Travel 35 000 kPa 5,075 psi

Maximum Pressure – Swing 26 000 kPa 3,770 psi

Boom Cylinder – Bore 105 mm 4 in

Boom Cylinder – Stroke 1023 mm 40 in

Stick Cylinder – Bore 115 mm 5 in

Stick Cylinder – Stroke 1147 mm 45 in

Bucket Cylinder – Bore 95 mm 4 in

Bucket Cylinder – Stroke 939 mm 37 in

Service Refill Capacities

Fuel Tank Capacity 187 L 49.4 gal

Cooling System 15 L 4.0 gal

Engine Oil 8 L 2.1 gal

Final Drive (each) 3 L 0.8 gal

Hydraulic System (including tank) 85 L 22.5 gal

Hydraulic Tank 72 L 19.0 gal

Diesel Exhaust Fluid (DEF) Tank 21 L 5.5 gal

Standards

Brakes ISO 10265:2008

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Cab/Operator Protective Guards (OPG) (optional)

ISO 10262:1998 (Level II)

Sound Performance

ISO 6395:2008 (external) 101 dB(A)

ISO 6396:2008 (inside cab) 71 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

315 GC Hydraulic Excavator Specifications

Operating Weights and Ground Pressures

Base Machine Configurations

500 mm (20") Triple Grouser Shoes

500 mm (20") Triple Grouser Shoes with Rubber Pad

500 mm (20") Rubber Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base Frame with Track Rollers and Carrier Rollers Base machine with 3.83 mt (8,440 lb) counterweight and long undercarriage Reach Boom + R2.8 (9'2") Stick + 0.53 m3 (0.69 yd3) GD Bucket

14 900 (32,800) 44.4 (6.4) 15 300

(33,700) 45.6 (6.6) 14 900 (33,100) 44.8 (6.5)

Reach Boom + R2.8 (9'2") Thumb Ready Stick + 0.53 m3 (0.69 yd3) GD Bucket

14 900 (33,000) 44.4 (6.4) 15 400

(33,900) 45.8 (6.6) 15 100 (33,200) 45.0 (6.5)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket

14 900 (32,800) 44.4 (6.4) 15 300

(33,700) 45.6 (6.6) 14 900 (33,100) 44.8 (6.5)

Reach Boom + R2.8 (9'2") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

15 600 (34,400) 46.5 (6.7) 16 000

(35,300) 47.8 (6.9) 15 600 (34,800) 47.1 (6.8)

Reach Boom + R2.8 (9'2") Thumb Ready Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

15 700 (34,500) 46.7 (6.8) 16 100

(35,500) 48.0 (7.0) 15 800 (34,800) 47.1 (6.8)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

15 600 (34,400) 46.5 (6.7) 16 000

(35,300) 47.8 (6.9) 15 600 (34,700) 46.9 (6.8)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Base Machine Configurations

600 mm (24") Triple Grouser Shoes

600 mm (24") Rubber Shoes

700 mm (28") Triple Grouser Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base Frame with Track Rollers and Carrier Rollers Base machine with 3.83 mt (8,440 lb) counterweight and long undercarriage Reach Boom + R2.8 (9'2") Stick + 0.53 m3 (0.69 yd3) GD Bucket

15 200 (33,400) 37.7 (5.5) 15 300

(33,700) 38.0 (5.5) 15 400 (33,900) 35.5 (5.1)

Reach Boom + R2.8 (9'2") Thumb Ready Stick + 0.53 m3 (0.69 yd3) GD Bucket

15 200 (33,600) 37.8 (5.5) 15 400

(33,900) 38.2 (5.5) 15 400 (34,000) 35.7 (5.2)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket

15 200 (33,400) 37.7 (5.5) 15 300

(33,800) 38.1 (5.5) 15 400 (33,900) 35.5 (5.1)

Reach Boom + R2.8 (9'2") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

16 000 (35,100) 39.6 (5.7) 16 100

(35,500) 40.0 (5.8) 16 200 (35,600) 37.3 (5.4)

Reach Boom + R2.8 (9'2") Thumb Ready Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

16 000 (35,300) 39.8 (5.8) 16 200

(35,600) 40.1 (5.8) 16 200 (35,700) 37.4 (5.4)

Reach Boom + R3.0 (9'10") Stick + 0.53 m3 (0.69 yd3) GD Bucket + Blade

16 000 (35,100) 39.6 (5.7) 16 100

(35,500) 40.0 (5.8) 16 200 (35,600) 37.3 (5.4)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine Weight: Base machine (with 3.83 mt [8,440 lb] counterweight, upper frame, long undercarriage – does not include boom, stick, bucket, boom cylinders, stick cylinders, bucket cylinders, tracks, blade, fuel tank, operator).

With Long Undercarriage 10 770 23,730

With Long Undercarriage (blade compatible) 11 050 24,360

Track Shoes:

500 mm (20") Triple Grouser Track Shoes 1540 3,390

500 mm (20") Triple Grouser Track Shoes with Rubber Pad 1950 4,310

500 mm (20") Rubber Shoes 1670 3,680

600 mm (24") Triple Grouser Track Shoes 1810 4,000

600 mm (24") Rubber Shoes 1970 4340

700 mm (28") Triple Grouser Track Shoes with Additional Steps 2020 4,440

Two Boom Cylinders 250 550

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 210 460

Blades (without lines, cylinders, frame modifications):

2500 mm (8'2") Blade for use with 500 mm (20") Track Shoes 440 960

2600 mm (8'6") Blade for use with 600 mm (24") Track Shoes 490 1,080

2700 mm (8'10") Blade for use with 700 mm (28") Track Shoes 500 1,110

Counterweight:

3.83 mt (8,440 lb) Counterweight 3830 8,440

Swing Frame 1420 3,140

Undercarriages:

Base Frame with GD Track Rollers and One Carrier Roller 2620 5,770

Base Frame with GD Track Rollers and One Carrier Roller (blade compatible) 2900 6,390

Boom (including lines, pins, stick cylinder):

Reach Boom 4.65 m (15'3") 1030 2,270

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick 2.8 m (9'2") 640 1,400

Thumb Ready Stick R2.8 (9'2") 720 1,600

Reach Stick R3.0 m (9'10") 650 1,440

Buckets (without linkage, with tips and side cutters):

0.53 m3 (0.69 yd3) GD Bucket 440 970

0.53 m3 (0.69 yd3) Severe Duty (SD) Bucket 500 1100

0.65 m3 (0.85 yd3) GD Bucket 470 1030

0.65 m3 (0.85 yd3) SD Bucket 540 1200

0.76 m3 (0.99 yd3) GD Bucket 510 1120

Quick Coupler:

Pin Grabber Quick Coupler 210 470

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Option Reach Boom

4.65 m (15'3")

Stick Options Reach Stick R2.8 (9'2")

Thumb Ready Stick R2.8 (9'2")

Reach Stick R3.0 (9'10")

1 Machine Height:

Top of Cab Height 2810 mm 9'3" 2810 mm 9'3" 2810 mm 9'3"

Top of OPG Height 2960 mm 9'9" 2960 mm 9'9" 2960 mm 9'9"

Handrail Height 2860 mm 9'5" 2860 mm 9'5" 2860 mm 9'5"

With Boom/Stick/Bucket Installed (with stick cylinder lines) 3070 mm 10'1" 3070 mm 10'1" 3190 mm 10'5"

With Boom/Stick Installed (with stick cylinder lines) 2910 mm 9'5" 2910 mm 9'5" 3000 mm 9'8"

With Boom Installed (with stick cylinder lines) 2350 mm 7'7" 2350 mm 7'7" 2350 mm 7'7"

Machine Height (with 500 mm [20"] rubber shoes):

Top of Cab Height 2860 mm 9'5" 2860 mm 9'5" 2860 mm 9'5"

Top of OPG Height 3000 mm 9'8" 3000 mm 9'8" 3000 mm 9'8"

Handrails Height 2910 mm 9'7" 2910 mm 9'7" 2910 mm 9'7"

With Boom/Stick/Bucket Installed (with stick cylinder lines) 3070 mm 10'1" 3070 mm 10'1" 3190 mm 10'5"

With Boom/Stick Installed (with stick cylinder lines) 2910 mm 9'5" 2910 mm 9'5" 3000 mm 9'8"

With Boom Installed (with stick cylinder lines) 2370 mm 7'8" 2370 mm 7'8" 2370 mm 7'8"

2 Machine Length (without blade):

With Boom/Stick/Bucket Installed (with stick cylinder lines) 7470 mm 24'5" 7470 mm 24'5" 7440 mm 24'4"

With Boom/Stick Installed (with stick cylinder lines) 7500 mm 24'6" 7500 mm 24'6" 7490 mm 24'6"

With Boom Installed (with stick cylinder lines) 6570 mm 21'6" 6570 mm 21'6" 6640 mm 21'9"

Machine Length (with blade, blade rear):

With Boom/Stick/Bucket Installed (with stick cylinder lines) 8040 mm 26'4" 8040 mm 26'4" 8010 mm 26'3"

With Boom/Stick Installed (with stick cylinder lines) 8070 mm 26'5" 8070 mm 26'5" 8060 mm 26'4"

With Boom Installed (with stick cylinder lines) 7140 mm 23'4" 7140 mm 23'4" 7140 mm 23'4"

Bucket Type GD GD GD

Bucket Capacity 0.65 m3 0.85 yd3 0.65 m3 0.85 yd3 0.53 m3 0.69 yd3

Bucket Tip Radius 1240 mm 4'1" 1240 mm 4'1" 1240 mm 4'1"

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Option Reach Boom

4.65 m (15'3")

Stick Options Reach Stick R2.8 (9'2")

Thumb Ready Stick R2.8 (9'2")

Reach Stick R3.0 (9'10")

3 Upperframe Width 2480 mm 8'2" 2480 mm 8'2" 2480 mm 8'2"

4 Tail Swing Radius –3.83 mt (8,440 lb) Counterweight 1570 mm 5'2" 1570 mm 5'2" 1570 mm 5'2"

5 Counterweight Clearance 880 mm 2'11" 880 mm 2'11" 880 mm 2'11"

6 Ground Clearance 440 mm 1'5" 440 mm 1'5" 440 mm 1'5"

7 Length to Center of Rollers 3040 mm 10'0" 3040 mm 10'0" 3040 mm 10'0"

8 Overall Track Length 3750 mm 12'4" 3750 mm 12'4" 3750 mm 12'4"

9 Track Gauge 1990 mm 6'6" 1990 mm 6'6" 1990 mm 6'6"

10 Track Width/Undercarriage Width:

500 mm (20") Shoes 2490 mm 8'2" 2490 mm 8'2" 2490 mm 8'2"

600 mm (24") Shoes 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6"

700 mm (28") Shoes (with steps) 2690 mm 8'10" 2690 mm 8'10" 2690 mm 8'10"

Bucket Type GD GD GD

Working Ranges and Forces All dimensions are approximate and may vary depending on bucket selection.

R3.0 (9'10")

R2.8 (9'2")

01234567891011 –1 Meters

Meters

05101520253035 Feet

Feet

Boom Options Reach Boom

4.65 m (15'3")

Stick Options Reach Stick R2.8 (9'2")

Thumb Ready Stick R2.8 (9'2")

Reach Stick R3.0 (9'10")

1 Maximum Digging Depth 5790 mm 19'0" 5790 mm 19'0" 5990 mm 19'8"

2 Maximum Reach at Ground Line 8500 mm 27'11" 8500 mm 27'11" 8690 mm 28'6"

3 Maximum Cutting Height 9540 mm 31'4" 9540 mm 31'4" 9690 mm 31'9"

4 Maximum Loading Height 7060 mm 23'2" 7060 mm 23'2" 7220 mm 23'8"

5 Minimum Loading Height 2260 mm 7'5" 2260 mm 7'5" 2080 mm 6'10"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 5600 mm 18'4" 5600 mm 18'4" 5810 mm 19'1"

7 Maximum Vertical Wall Digging Depth 4990 mm 16'4" 4990 mm 16'4" 5180 mm 17'0"

8 Minimum Working Equipment Radius 2170 mm 7'1" 2170 mm 7'1" 2240 mm 7'4"

Bucket Digging Force (ISO) 98.67 kN 22,180 lbf 98.67 kN 22,180 lbf 98.67 kN 22,180 lbf

Stick Digging Force (ISO) 62.34 kN 14,010 lbf 62.34 kN 14,010 lbf 59.29 kN 13,330 lbf

Bucket Type GD GD GD

Blade Working Ranges All dimensions are approximate and may vary depending on bucket selection.

Blade Options 2500 mm 2600 mm 2700 mm (8'2") (8'6") (8'10")

1 Blade Height 616 mm 2'0" 616 mm 2'0" 616 mm 2'0"

2 Maximum Lowering Depth from Ground 550 mm 1'10" 550 mm 1'10" 550 mm 1'10"

3 Maximum Raising Height above Ground 1018 mm 3'4" 1018 mm 3'4" 1018 mm 3'4" θ Approach Angle 26° 26° 26°

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2600 *2250 2100 6750 15'0" lb *8,700 *8,700 *7,650 5,550 *4,900 4,650 22'0"

3000 mm kg *6850 *6850 *4900 3900 3900 2500 *2250 1850 7240 10'0" lb *14,750 *14,750 *10,650 8,350 8,400 5,350 *4,900 4,050 23'8"

1500 mm kg *8950 6500 *5700 3600 3800 2400 *2350 1750 7400 5'0" lb *19,250 14,000 *12,250 7,750 8,100 5,100 *5,150 3,800 24'3"

0 mm kg *6700 6100 5650 3400 3650 2300 *2600 1750 7240 0'0" lb *15,500 13,100 12,100 7,300 7,850 4,900 *5,750 3,850 23'8"

–1500 mm kg *4500 *4500 *8250 6000 5550 3300 3600 2250 3100 1950 6740 –5'0" lb *10,050 *10,050 *17,900 12,900 11,900 7,100 7,750 4,800 6,800 4,250 22'0"

–3000 mm kg *7950 *7950 *6300 6100 *4450 3300 *2950 2400 5810 –10'0" lb *17,900 *17,900 *13,550 13,100 *9,550 7,150 *6,450 5,250 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2650 *2250 2150 6750 15'0" lb *8,700 *8,700 *7,650 5,700 *4,900 4,800 22'0"

3000 mm kg *6850 *6850 *4900 3950 4000 2550 *2250 1900 7240 10'0" lb *14,750 *14,750 *10,650 8,550 8,600 5,500 *4,900 4,150 23'8"

1500 mm kg *8950 6650 *5700 3700 3900 2450 *2350 1800 7400 5'0" lb *19,250 14,350 *12,250 7,950 8,350 5,250 *5,150 3,950 24'3"

0 mm kg *6700 6250 5800 3500 3750 2350 *2600 1800 7240 0'0" lb *15,500 13,450 12,450 7,500 8,100 5,050 *5,750 3,950 23'8"

–1500 mm kg *4500 *4500 *8250 6200 *5650 3400 3700 2300 *3150 2000 6740 –5'0" lb *10,050 *10,050 *17,900 13,300 *12,200 7,300 8,000 4,950 *6,900 4,350 22'0"

–3000 mm kg *7950 *7950 *6300 6250 *4450 3400 *2950 2450 5810 –10'0" lb *17,900 *17,900 *13,550 13,450 *9,550 7,350 *6,450 5,400 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2650 *2250 2150 6750 15'0" lb *8,700 *8,700 *7,650 5,650 *4,900 4,750 22'0"

3000 mm kg *6850 *6850 *4900 3950 4000 2550 *2250 1900 7240 10'0" lb *14,750 *14,750 *10,650 8,450 8,550 5,450 *4,900 4,150 23'8"

1500 mm kg *8950 6600 *5700 3650 3850 2450 *2350 1800 7400 5'0" lb *19,250 14,250 *12,250 7,900 8,250 5,200 *5,150 3,900 24'3"

0 mm kg *6700 6200 5750 3450 3750 2350 *2600 1800 7240 0'0" lb *15,500 13,350 12,350 7,450 8,050 5,000 *5,750 3,950 23'8"

–1500 mm kg *4500 *4500 *8250 6150 5650 3350 3700 2300 *3150 1950 6740 –5'0" lb *10,050 *10,050 *17,900 13,150 12,100 7,250 7,900 4,900 *6,900 4,300 22'0"

–3000 mm kg *7950 *7950 *6300 6200 *4450 3400 *2950 2400 5810 –10'0" lb *17,900 *17,900 *13,550 13,350 *9,550 7,300 *6,450 5,350 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2650 *2250 2200 6750 15'0" lb *8,700 *8,700 *7,650 5,700 *4,900 4,800 22'0"

3000 mm kg *6850 *6850 *4900 4000 4050 2600 *2250 1900 7240 10'0" lb *14,750 *14,750 *10,650 8,550 8,650 5,550 *4,900 4,200 23'8"

1500 mm kg *8950 6700 *5700 3700 3900 2450 *2350 1800 7400 5'0" lb *19,250 14,400 *12,250 8,000 8,350 5,300 *5,150 3,950 24'3"

0 mm kg *6700 6300 5850 3500 3800 2350 *2600 1800 7240 0'0" lb *15,500 13,500 12,500 7,550 8,150 5,050 *5,750 4,000 23'8"

–1500 mm kg *4500 *4500 *8250 6200 *5650 3400 3750 2300 *3150 2000 6740 –5'0" lb *10,050 *10,050 *17,900 13,350 *12,200 7,350 8,050 4,950 *6,900 4,400 22'0"

–3000 mm kg *7950 *7950 *6300 6300 *4450 3450 *2950 2450 5810 –10'0" lb *17,900 *17,900 *13,550 13,500 *9,550 7,400 *6,450 5,450 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 500 mm (20") �Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2600 *2200 2100 6750 15'0" lb *8,650 *8,650 *7,600 5,500 *4,850 4,650 22'0"

3000 mm kg *6800 *6800 *4850 3900 3900 2500 *2200 1850 7240 10'0" lb *14,600 *14,600 *10,550 8,350 8,400 5,350 *4,850 4,000 23'8"

1500 mm kg *8850 6500 *5600 3600 3800 2350 *2350 1700 7400 5'0" lb *19,100 14,000 *12,150 7,750 8,100 5,100 *5,100 3,750 24'3"

0 mm kg *6650 6100 5650 3400 3650 2250 *2600 1750 7240 0'0" lb *15,450 13,050 12,150 7,250 7,850 4,850 *5,700 3,800 23'8"

–1500 mm kg *4450 *4450 *8150 6000 5550 3300 3600 2200 3100 1900 6740 –5'0" lb *10,000 *10,000 *17,700 12,900 11,900 7,050 7,750 4,750 6,750 4,200 22'0"

–3000 mm kg *7950 *7950 *6250 6100 *4400 3300 *2900 2350 5810 –10'0" lb *17,850 *17,850 *13,400 13,050 *9,400 7,100 *6,300 5,250 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2650 *2200 2150 6750 15'0" lb *8,650 *8,650 *7,600 5,650 *4,850 4,750 22'0"

3000 mm kg *6800 *6800 *4850 3950 *4000 2550 *2200 1900 7240 10'0" lb *14,600 *14,600 *10,550 8,550 8,600 5,500 *4,850 4,150 23'8"

1500 mm kg *8850 6650 *5600 3700 3900 2450 *2350 1800 7400 5'0" lb *19,100 14,350 *12,150 7,950 8,350 5,250 *5,100 3,900 24'3"

0 mm kg *6650 6250 5800 3500 3750 2350 *2600 1800 7240 0'0" lb *15,450 13,450 12,450 7,450 8,100 5,000 *5,700 3,950 23'8"

–1500 mm kg *4450 *4450 *8150 6200 *5600 3400 3700 2300 *3100 1950 6740 –5'0" lb *10,000 *10,000 *17,700 13,250 *12,100 7,250 8,000 4,900 *6,850 4,300 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3400 *2900 2450 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,300 *6,300 5,400 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2600 *2200 2150 6750 15'0" lb *8,650 *8,650 *7,600 5,600 *4,850 4,700 22'0"

3000 mm kg *6800 *6800 *4850 3950 4000 2550 *2200 1850 7240 10'0" lb *14,600 *14,600 *10,550 8,450 8,550 5,450 *4,850 4,100 23'8"

1500 mm kg *8850 6600 *5600 3650 3850 2400 *2350 1750 7400 5'0" lb *19,100 14,250 *12,150 7,850 8,250 5,200 *5,100 3,850 24'3"

0 mm kg *6650 6200 5750 3450 3750 2300 *2600 1800 7240 0'0" lb *15,450 13,300 12,350 7,400 8,000 4,950 *5,700 3,900 23'8"

–1500 mm kg *4450 *4450 *8150 6100 *5600 3350 3700 2250 *3100 1950 6740 –5'0" lb *10,000 *10,000 *17,700 13,150 *12,100 7,200 7,900 4,850 *6,850 4,250 22'0"

–3000 mm kg *7950 *7950 *6250 6200 *4400 3350 *2900 2400 5810 –10'0" lb *17,850 *17,850 *13,400 13,300 *9,400 7,250 *6,300 5,350 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2650 *2200 2150 6750 15'0" lb *8,650 *8,650 *7,600 5,700 *4,850 4,800 22'0"

3000 mm kg *6800 *6800 *4850 4000 *4000 2550 *2200 1900 7240 10'0" lb *14,600 *14,600 *10,550 8,550 *8,650 5,500 *4,850 4,150 23'8"

1500 mm kg *8850 6700 *5600 3700 3900 2450 *2350 1800 7400 5'0" lb *19,100 14,400 *12,150 7,950 8,350 5,250 *5,100 3,900 24'3"

0 mm kg *6650 6300 5850 3500 3800 2350 *2600 1800 7240 0'0" lb *15,450 13,500 12,500 7,500 8,150 5,050 *5,700 3,950 23'8"

–1500 mm kg *4450 *4450 *8150 6200 *5600 3400 3750 2300 *3100 2000 6740 –5'0" lb *10,000 *10,000 *17,700 13,300 *12,100 7,300 8,000 4,950 *6,850 4,350 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3400 *2900 2450 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,350 *6,300 5,400 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") �Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2600 *2050 2000 6960 15'0" lb *7,950 *7,950 *7,400 5,600 *4,500 4,450 22'8"

3000 mm kg *5850 *5850 *4800 3900 3950 2500 *2050 1800 7440 10'0" lb *12,100 *12,100 *10,350 8,400 8,400 5,400 *4,500 3,900 24'4"

1500 mm kg *8750 6600 *5600 3650 3800 2400 *2500 1700 *2150 1700 7590 5'0" lb *18,800 14,150 *12,050 7,800 8,150 5,150 *4,750 3,700 24'10"

0 mm kg *7000 6150 5650 3400 3650 2300 *2400 1700 7430 0'0" lb *16,150 13,150 12,150 7,350 7,900 4,900 *5,250 3,700 24'4"

–1500 mm kg *4300 *4300 *8500 6000 5550 3300 3600 2250 *2850 1850 6940 –5'0" lb *9,650 *9,650 *18,350 12,900 11,900 7,100 7,750 4,800 *6,250 4,050 22'8"

–3000 mm kg *7450 *7450 *6650 6050 *4700 3300 *3000 2250 *2950 2250 6050 –10'0" lb *16,700 *16,700 *14,350 13,000 *10,000 7,100 *6,400 4,950 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2650 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 5,700 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4000 *3950 2600 *2050 1850 7440 10'0" lb *12,100 *12,100 *10,350 8,600 *8,550 5,550 *4,500 4,000 24'4"

1500 mm kg *8750 6750 *5600 3750 3900 2450 *2500 1750 *2150 1750 7590 5'0" lb *18,800 14,550 *12,050 8,000 8,350 5,300 *4,750 3,800 24'10"

0 mm kg *7000 6300 5800 3500 3800 2350 *2400 1750 7430 0'0" lb *16,150 13,500 12,500 7,550 8,100 5,050 *5,250 3,800 24'4"

–1500 mm kg *4300 *4300 *8500 6200 5700 3400 3700 2300 *2850 1900 6940 –5'0" lb *9,650 *9,650 *18,350 13,250 12,200 7,300 8,000 4,950 *6,250 4,150 22'8"

–3000 mm kg *7450 *7450 *6650 6250 *4700 3400 *3000 2350 *2950 2300 6050 –10'0" lb *16,700 *16,700 *14,350 13,400 *10,000 7,300 *6,400 5,100 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2650 *2050 2050 6960 15'0" lb *7,950 *7,950 *7,400 5,650 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 3950 *3950 2550 *2050 1800 7440 10'0" lb *12,100 *12,100 *10,350 8,550 *8,550 5,500 *4,500 4,000 24'4"

1500 mm kg *8750 6700 *5600 3700 3850 2450 *2500 1750 *2150 1700 7590 5'0" lb *18,800 14,400 *12,050 7,950 8,300 5,250 *4,750 3,750 24'10"

0 mm kg *7000 6250 5750 3450 3750 2350 *2400 1750 7430 0'0" lb *16,150 13,400 12,350 7,450 8,050 5,000 *5,250 3,800 24'4"

–1500 mm kg *4300 *4300 *8500 6150 5650 3350 3700 2300 *2850 1900 6940 –5'0" lb *9,650 *9,650 *18,350 13,150 12,100 7,250 7,900 4,900 *6,250 4,150 22'8"

–3000 mm kg *7450 *7450 *6650 6200 *4700 3350 *3000 2300 *2950 2300 6050 –10'0" lb *16,700 *16,700 *14,350 13,250 *10,000 7,250 *6,400 5,050 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket

3.0 m (9'10") 4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2700 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 5,750 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4000 *3950 2600 *2050 1850 7440 10'0" lb *12,100 *12,100 *10,350 8,650 *8,550 5,550 *4,500 4,050 24'4"

1500 mm kg *8750 6800 *5600 3750 3900 2450 *2500 1750 *2150 1750 7590 5'0" lb *18,800 14,600 *12,050 8,050 8,400 5,300 *4,750 3,800 24'10"

0 mm kg *7000 6350 5850 3500 3800 2350 *2400 1750 7430 0'0" lb *16,150 13,600 12,550 7,550 8,150 5,100 *5,250 3,850 24'4"

–1500 mm kg *4300 *4300 *8500 6200 5700 3400 3750 2300 *2850 1900 6940 –5'0" lb *9,650 *9,650 *18,350 13,300 12,250 7,350 8,000 4,950 *6,250 4,200 22'8"

–3000 mm kg *7450 *7450 *6650 6250 *4700 3400 *3000 2350 *2950 2300 6050 –10'0" lb *16,700 *16,700 *14,350 13,450 *10,000 7,350 *6,400 5,100 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") �Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2700 *2250 2200 6750 15'0" lb *8,700 *8,700 *7,650 5,800 *4,900 4,900 22'0"

3000 mm kg *6850 *6850 *4900 4050 3900 2600 *2250 1950 7240 10'0" lb *14,750 *14,750 *10,650 8,700 8,350 5,600 *4,900 4,250 23'8"

1500 mm kg *8950 6800 *5700 3750 3750 2500 *2350 1850 7400 5'0" lb *19,250 14,600 *12,250 8,100 8,100 5,350 *5,150 4,000 24'3"

0 mm kg *6700 6400 5650 3550 3650 2400 *2600 1850 7240 0'0" lb *15,500 13,750 12,100 7,650 7,850 5,150 *5,750 4,050 23'8"

–1500 mm kg *4500 *4500 *8250 6300 5500 3450 3600 2350 3050 2050 6740 –5'0" lb *10,050 *10,050 *17,900 13,550 11,850 7,450 7,750 5,050 6,750 4,450 22'0"

–3000 mm kg *7950 *7950 *6300 *6300 *4450 3500 *2950 2500 5810 –10'0" lb *17,900 *17,900 *13,550 *13,550 *9,550 7,500 *6,450 5,550 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

2.8 m (9'2") 4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2750 *2250 *2250 6750 15'0" lb *8,700 *8,700 *7,650 5,950 *4,900 *4,900 22'0"

3000 mm kg *6850 *6850 *4900 4150 4000 2700 *2250 2000 7240 10'0" lb *14,750 *14,750 *10,650 8,900 8,600 5,750 *4,900 4,400 23'8"

1500 mm kg *8950 6950 *5700 3850 3850 2550 *2350 1900 7400 5'0" lb *19,250 15,000 *12,250 8,300 8,300 5,500 *5,150 4,150 24'3"

0 mm kg *6700 6550 5800 3650 3750 2450 *2600 1900 7240 0'0" lb *15,500 14,100 12,400 7,850 8,100 5,300 *5,750 4,200 23'8"

–1500 mm kg *4500 *4500 *8250 6500 *5650 3550 3700 2400 *3150 2100 6740 –5'0" lb *10,050 *10,050 *17,900 13,900 12,200 7,650 7,950 5,200 *6,900 4,600 22'0"

–3000 mm kg *7950 *7950 *6300 *6300 *4450 3600 *2950 2550 5810 –10'0" lb *17,900 *17,900 *13,550 *13,550 *9,550 7,700 *6,450 5,700 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

2.8 m (9'2") 4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2750 *2250 *2250 6750 15'0" lb *8,700 *8,700 *7,650 5,900 *4,900 *4,900 22'0"

3000 mm kg *6850 *6850 *4900 4100 3950 2650 *2250 2000 7240 10'0" lb *14,750 *14,750 *10,650 8,850 8,500 5,750 *4,900 4,350 23'8"

1500 mm kg *8950 6950 *5700 3850 3850 2550 *2350 1850 7400 5'0" lb *19,250 14,900 *12,250 8,250 8,200 5,500 *5,150 4,100 24'3"

0 mm kg *6700 6550 5700 3650 3700 2450 *2600 1900 7240 0'0" lb *15,500 14,000 12,300 7,800 8,000 5,250 *5,750 4,150 23'8"

–1500 mm kg *4500 *4500 *8250 6450 5600 3550 3650 2400 *3150 2100 6740 –5'0" lb *10,050 *10,050 *17,900 13,850 12,050 7,650 7,900 5,150 6,900 4,550 22'0"

–3000 mm kg *7950 *7950 *6300 *6300 *4450 3550 *2950 2550 5810 –10'0" lb *17,900 *17,900 *13,550 *13,550 *9,550 7,650 *6,450 5,650 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

2.8 m (9'2") 4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

R2.8

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,500 *6,500 13'2"

6000 mm kg *3700 *3700 *2400 *2400 5830 20'0" lb *8,100 *8,100 *5,250 *5,250 18'10"

4500 mm kg *4000 *4000 *3600 2800 *2250 *2250 6750 15'0" lb *8,700 *8,700 *7,650 5,950 *4,900 *4,900 22'0"

3000 mm kg *6850 *6850 *4900 4150 4000 2700 *2250 2000 7240 10'0" lb *14,750 *14,750 *10,650 8,950 8,600 5,800 *4,900 4,400 23'8"

1500 mm kg *8950 7000 *5700 3900 3900 2600 *2350 1900 7400 5'0" lb *19,250 15,100 *12,250 8,400 8,350 5,550 *5,150 4,150 24'3"

0 mm kg *6700 6600 5800 3700 3750 2500 *2600 1900 7240 0'0" lb *15,500 14,200 12,450 7,950 8,100 5,350 *5,750 4,200 23'8"

–1500 mm kg *4500 *4500 *8250 6550 *5650 3600 3700 2450 *3150 2100 6740 –5'0" lb *10,050 *10,050 *17,900 14,050 *12,200 7,750 8,000 5,250 *6,900 4,600 22'0"

–3000 mm kg *7950 *7950 *6300 *6300 *4450 3600 *2950 2600 5810 –10'0" lb *17,900 *17,900 *13,550 *13,550 *9,550 7,800 *6,450 5,750 18'10"

–4500 mm kg *2100 *2100 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 500 mm (20") �Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2700 *2200 2200 6750 15'0" lb *8,650 *8,650 *7,600 5,750 *4,850 *4,850 22'0"

3000 mm kg *6800 *6800 *4850 4050 3900 2600 *2200 1900 7240 10'0" lb *14,600 *14,600 *10,550 8,700 8,350 5,600 *4,850 4,200 23'8"

1500 mm kg *8850 6800 *5600 3750 3750 2500 *2350 1800 7400 5'0" lb *19,100 14,600 *12,150 8,100 8,100 5,350 *5,100 3,950 24'3"

0 mm kg *6650 6400 5650 3550 3650 2400 *2600 1850 7240 0'0" lb *15,450 13,700 12,100 7,600 7,850 5,100 *5,700 4,000 23'8"

–1500 mm kg *4450 *4450 *8150 6300 5550 3450 3600 2350 3050 2000 6740 –5'0" lb *10,000 *10,000 *17,700 13,500 11,850 7,400 7,750 5,000 6,750 4,400 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3500 *2900 2500 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,450 *6,300 5,500 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2750 *2200 *2200 6750 15'0" lb *8,650 *8,650 *7,600 5,900 *4,850 *4,850 22'0"

3000 mm kg *6800 *6800 *4850 4150 *4000 2650 *2200 2000 7240 10'0" lb *14,600 *14,600 *10,550 8,900 8,600 5,750 *4,850 4,350 23'8"

1500 mm kg *8850 6950 *5600 3850 3850 2550 *2350 1850 7400 5'0" lb *19,100 15,000 *12,150 8,300 8,300 5,500 *5,100 4,100 24'3"

0 mm kg *6650 6550 5800 3650 3750 2450 *2600 1900 7240 0'0" lb *15,450 14,050 *12,450 7,850 8,050 5,250 *5,700 4,150 23'8"

–1500 mm kg *4450 *4450 *8150 6500 *5600 3550 3700 2400 *3100 2050 6740 –5'0" lb *10,000 *10,000 *17,700 13,900 *12,100 7,650 7,950 5,150 *6,850 4,550 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3550 *2900 2550 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,700 *6,300 5,650 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2750 *2200 *2200 6750 15'0" lb *8,650 *8,650 *7,600 5,900 *4,850 *4,850 22'0"

3000 mm kg *6800 *6800 *4850 4100 3950 2650 *2200 1950 7240 10'0" lb *14,600 *14,600 *10,550 8,850 8,500 5,700 *4,850 4,300 23'8"

1500 mm kg *8850 6950 *5600 3850 3850 2550 *2350 1850 7400 5'0" lb *19,100 14,900 *12,150 8,250 8,200 5,450 *5,100 4,050 24'3"

0 mm kg *6650 6500 5750 3600 3700 2450 *2600 1900 7240 0'0" lb *15,450 14,000 12,300 7,800 8,000 5,250 *5,700 4,100 23'8"

–1500 mm kg *4450 *4450 *8150 6450 *5600 3550 3650 2400 *3100 2050 6740 –5'0" lb *10,000 *10,000 *17,700 13,800 12,050 7,600 7,850 5,150 *6,850 4,500 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3550 *2900 2550 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,650 *6,300 5,600 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

Thumb Ready Stick

2.8 m (9'2")

R2.8TRS

4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") mm ft/in

7500 mm kg *2850 *2850 4210 25'0" lb *6,400 *6,400 13'2"

6000 mm kg *3700 *3700 *2350 *2350 5830 20'0" lb *8,050 *8,050 *5,200 *5,200 18'10"

4500 mm kg *3950 *3950 *3600 2800 *2200 *2200 6750 15'0" lb *8,650 *8,650 *7,600 5,950 *4,850 *4,850 22'0"

3000 mm kg *6800 *6800 *4850 4150 *4000 2700 *2200 2000 7240 10'0" lb *14,600 *14,600 *10,550 8,950 8,600 5,800 *4,850 4,400 23'8"

1500 mm kg *8850 7000 *5600 3900 3900 2600 *2350 1900 7400 5'0" lb *19,100 15,100 *12,150 8,350 8,350 5,500 *5,100 4,100 24'3"

0 mm kg *6650 6600 5800 3650 3750 2450 *2600 1900 7240 0'0" lb *15,450 14,200 12,450 7,900 8,100 5,300 *5,700 4,150 23'8"

–1500 mm kg *4450 *4450 *8150 6550 *5600 3600 3700 2400 *3100 2100 6740 –5'0" lb *10,000 *10,000 *17,700 14,000 *12,100 7,700 8,000 5,200 *6,850 4,600 22'0"

–3000 mm kg *7950 *7950 *6250 *6250 *4400 3600 *2900 2600 5810 –10'0" lb *17,850 *17,850 *13,400 *13,400 *9,400 7,750 *6,300 5,700 18'10"

–4500 mm kg *2050 *2050 3930 –15'0" lb

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") �Triple Grouser Track Shoes and 500 mm (20") Rubber Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2700 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 5,850 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4100 3900 2650 *2050 1850 7440 10'0" lb *12,100 *12,100 *10,350 8,750 8,400 5,650 *4,500 4,100 24'4"

1500 mm kg *8750 6900 *5600 3800 3800 2500 *2500 1800 *2150 1750 7590 5'0" lb *18,800 14,800 *12,050 8,150 8,100 5,400 *4,750 3,850 24'10"

0 mm kg *7000 6450 5650 3600 3650 2400 *2400 1800 7430 0'0" lb *16,150 13,800 12,100 7,700 7,850 5,150 *5,250 3,900 24'4"

–1500 mm kg *4300 *4300 *8500 6300 5500 3450 3600 2350 *2850 1950 6940 –5'0" lb *9,650 *9,650 *18,350 13,550 11,850 7,450 7,750 5,050 *6,250 4,250 22'8"

–3000 mm kg *7450 *7450 *6650 6350 *4700 3450 *3000 2350 *2950 2350 6050 –10'0" lb *16,700 *16,700 *14,350 13,650 *10,000 7,450 *6,400 5,200 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2500 mm (8'2") Blade

3.0 m (9'10") 4.65 m (15'3") 500 mm (20") ��Triple Grouser Track Shoes with Rubber Pad

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2800 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 5,950 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4150 *3950 2700 *2050 1900 7440 10'0" lb *12,100 *12,100 *10,350 8,950 *8,550 5,800 *4,500 4,200 24'4"

1500 mm kg *8750 7050 *5600 3900 3900 2600 *2500 1850 *2150 1800 7590 5'0" lb *18,800 15,200 *12,050 8,350 8,350 5,550 *4,750 4,000 24'10"

0 mm kg *7000 6600 5800 3650 3750 2450 *2400 1850 7430 0'0" lb *16,150 14,150 12,450 7,900 8,100 5,300 *5,250 4,000 24'4"

–1500 mm kg *4300 *4300 *8500 6500 5700 3550 3700 2400 *2850 2000 6940 –5'0" lb *9,650 *9,650 *18,350 13,900 12,200 7,650 7,950 5,200 *6,250 4,400 22'8"

–3000 mm kg *7450 *7450 *6650 6550 *4700 3550 *3000 2450 *2950 2400 6050 –10'0" lb *16,700 *16,700 *14,350 14,000 *10,000 7,650 *6,400 5,350 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2600 mm (8'6") Blade

3.0 m (9'10") 4.65 m (15'3") 600 mm (24") �Triple Grouser Track Shoes and 600 mm (24") Rubber Shoes

3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2800 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 5,950 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4150 *3950 2700 *2050 1900 7440 10'0" lb *12,100 *12,100 *10,350 8,950 8,550 5,750 *4,500 4,200 24'4"

1500 mm kg *8750 7000 *5600 3850 3850 2550 *2500 1850 *2150 1800 7590 5'0" lb *18,800 15,100 *12,050 8,350 8,250 5,500 *4,750 3,950 24'10"

0 mm kg *7000 6550 5750 3650 3750 2450 *2400 1850 7430 0'0" lb *16,150 14,100 12,300 7,850 8,000 5,300 *5,250 4,000 24'4"

–1500 mm kg *4300 *4300 *8500 6450 5600 3550 3650 2400 *2850 2000 6940 –5'0" lb *9,650 *9,650 *18,350 13,800 12,050 7,600 7,850 5,150 *6,250 4,350 22'8"

–3000 mm kg *7450 *7450 *6650 6500 *4700 3550 *3000 2450 *2950 2400 6050 –10'0" lb *16,700 *16,700 *14,350 13,950 *10,000 7,650 *6,400 5,300 19'8"

–4500 mm kg *3450 *3450 *2050 *2050 4490 –15'0" lb *7,050 *7,050 *4,250 *4,250 14'4"

Reach Boom Lift Capacities – Counterweight: 3.83 mt (8,440 lb) – without Bucket – Blade Up 2700 mm (8'10") Blade

3.0 m (9'10") 4.65 m (15'3") 700 mm (28") �Triple Grouser Track Shoes 3040 mm (9'11")

R3.0

1990 mm (6'6") 3750 mm (12'3")

1500 mm (5'0") 3000 mm (10'0") 4500 mm (15'0") 6000 mm (20'0") 7500 mm (25'0") mm ft/in

7500 mm kg *2700 *2700 *2600 *2600 4540 25'0" lb *5,850 *5,850 14'3"

6000 mm kg *3450 *3450 *2400 *2400 *2200 *2200 6070 20'0" lb *7,550 *7,550 *4,850 *4,850 19'8"

4500 mm kg *3650 *3650 *3450 2800 *2050 *2050 6960 15'0" lb *7,950 *7,950 *7,400 6,000 *4,500 *4,500 22'8"

3000 mm kg *5850 *5850 *4800 4200 *3950 2700 *2050 1950 7440 10'0" lb *12,100 *12,100 *10,350 9,050 *8,550 5,850 *4,500 4,250 24'4"

1500 mm kg *8750 7100 *5600 3900 3900 2600 *2500 1850 *2150 1850 7590 5'0" lb *18,800 15,300 *12,050 8,450 8,350 5,600 *4,750 4,000 24'10"

0 mm kg *7000 6650 5800 3700 3800 2500 *2400 1850 7430 0'0" lb *16,150 14,300 12,500 7,950 8,100 5,350 *5,250 4,050 24'4"

–1500 mm kg *4300 *4300 *8500 6550 5700 3600 3700 2450 *2850 2000 6940 –5'0" lb *9,650 *9,650 *18,350 14,000 12,200 7,750 7,950 5,250 *6,250 4,400 22'8"

–3000 mm kg *7450 *7450 *6650 6600 *4700 3600 *3000 2450 *2950 2450 6050 –10'0" lb *16,700 *16,700 *14,350 14,150 *10,000 7,750…