AEXQ4000_326__07H__Hydraulic_Excavator_-_Technical_Specifications__N_Am_.pdf

Technical Specifications

Hydraulic Excavator

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specifications Engine

Swing Mechanism

Weights

Track

Drive

Hydraulic System

Service Refill Capacities

Standards

Sound Performance

Operating Weights and Ground Pressures

Major Component Weights

Dimensions

Working Ranges and Forces

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb)

Super Long Reach (SLR) Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb)

Bucket Specifications and Compatibility

Attachments Offering Guide

Thumb Specifications

Standard and Optional Equipment Dealer Installed Kits and Attachments 326 Environmental Declaration

326 Hydraulic Excavator Specifications

Engine

Engine Model Cat® C7.1

Net Power

ISO 9249 149.8 kW 201 hp

ISO 9249 (DIN) 204 hp (metric)

Engine Power

ISO 14396 151 kW 202 hp

ISO 14396 (DIN) 205 hp (metric)

Bore 105 mm 4 in

Stroke 135 mm 5 in

Displacement 7.01 L 428 in3

Biodiesel capability Up to B20(1)

• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.

• Recommended for use up to 4500 m (14,760 ft) altitude with engine power derate above 3000 m (9,840 ft).

• Advertised power is tested per the specified standard in effect at the time of manufacture.

• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator.

• Engine speed at 2,000 rpm.

(1)�Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to:

and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

*�Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

**�Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Swing Mechanism

Swing Speed 9.9 rpm

Maximum Swing Torque 106 kN·m 78,180 lbf·ft

Weights

Operating Weight 26 300 kg 57,900 lb

• Long undercarriage, Reach boom, R2.95 m (9'7") stick,

1.54 m3 (2.01 yd3) Heavy Duty (HD) bucket, 790 mm (31") triple grouser shoes and 4600 kg (10,140 lb) counterweight.

Operating Weight 29 700 kg 65,400 lb

• Long undercarriage, Super Long Reach boom, SLR 7.85A (25'9") stick, 0.57 m3 (0.75 yd3) Ditch Cleaning (DC) bucket, 790 mm (31") triple grouser shoes and 7400 kg (16,310 lb) counterweight.

Track

Standard Track Shoes Width 790 mm 31 in

Optional Track Shoes Width 600 mm 24 in

Optional Track Shoes Width 700 mm 28 in

Number of Shoes (each side) 51

Number of Track Rollers (each side) 8

Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%

Maximum Travel Speed 5.6 km/h 3.5 mph

Maximum Drawbar Pull 228 kN 51,256 lbf

Hydraulic System

Main System – Maximum Flow – Implement

481 L/min (241 × 2 pumps)

127 gal/min (64 × 2 pumps)

Maximum Pressure – Equipment – Normal

35 000 kPa 5,075 psi

Maximum Pressure – Heavy Lift Mode/Auto Dig Boost

38 000 kPa 5,510 psi

Maximum Pressure – Travel 35 000 kPa 5,075 psi

Maximum Pressure – Swing 28 400 kPa 4,118 psi

Auxiliary Pump (optional) – Maximum Flow

54 L/min 14 gal/min

Auxiliary Pump (optional) – Maximum Pressure

14 000 kPa 2,031 psi

Boom Cylinder – Bore 135 mm 5 in

Boom Cylinder – Stroke 1305 mm 51 in

Stick Cylinder – Bore 140 mm 6 in

Stick Cylinder – Stroke 1660 mm 65 in

Bucket Cylinder – Bore 130 mm 5 in

Bucket Cylinder – Stroke 1156 mm 46 in

Service Refill Capacities

Fuel Tank Capacity 474 L 125.2 gal

Cooling System 25 L 6.6 gal

Engine Oil (with filter) 25 L 6.6 gal

Swing Drive 11.5 L 3.0 gal

Final Drive (each) 4.5 L 1.2 gal

Hydraulic System (including tank) 310 L 81.9 gal

Hydraulic Tank 147 L 38.8 gal

Diesel Exhaust Fluid (DEF) Tank 41 L 10.8 gal

Standards

Brakes ISO 10265:2008

Cab/Operator Protective Guards (OPG) (optional)

ISO 10262:1998 Level II

Cab/Rollover Protective Structure (ROPS)

ISO 12117-2:2008

Sound Performance

ISO 6395:2008 (external) 103 dB(A)

ISO 6396:2008 (inside cab) 70 dB(A)

• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

Operating Weights and Ground Pressures

600 mm (24") Single Grouser Shoes

700 mm (28") Triple Grouser Shoes

790 mm (31") Triple Grouser Shoes

Weight Ground

Pressure Weight Ground

Pressure Weight Ground

Pressure kg (lb) kPa (psi) kg (lb) kPa (psi) kg (lb) kPa (psi)

Base Machine with 4600 kg (10,140 lb) Counterweight and Long Undercarriage Reach Boom + R2.95CB1 (9'8") Stick +

1.54 m3 (2.01 yd3) HD Bucket

25 600 (56,300)

(7.4)

26 000 (57,200)

(6.4)

26 300 (57,900)

(5.8)

Reach Boom + R3.6CB1 (11'10") Stick +

1.54 m3 (2.01 yd3) HD Bucket

25 800 (56,700)

(7.4)

26 200 (57,600)

(6.5)

26 500 (58,300)

(5.8)

Base Machine with 7400 kg (16,310 lb) Counterweight and Long Undercarriage Super Long Reach Boom + SLR 7.85A (25'9") Stick +

0.57 m3 (0.75 yd3) DC Bucket

29 000 (63,800)

(8.4)

29 400 (64,700)

(7.3)

29 700 (65,400)

(6.5)

All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.

Major Component Weights kg lb Base Machine Weight (including counterweight, upper frame, undercarriage and two boom cylinders – does not include boom, stick, bucket, stick cylinder, bucket cylinders, tracks, 90% fuel tank and 75 kg [165 lb] operator).

With 4600 kg (10,140 lb) Counterweight and Long Undercarriage 17 250 38,010

With 7400 kg (16,310 lb) Counterweight and Long Undercarriage 19 980 44,040

Track Shoes:

600 mm (24") Width, 14 mm (0.55") Thick, Single Grouser Track Shoes 3260 7,170

700 mm (28") Width, 12.5 mm (0.49") Thick, Triple Grouser Track Shoes 3670 8,080

790 mm (31") Width, 12.5 mm (0.49") Thick, Triple Grouser Track Shoes with Step Extension 4000 8,810

Two Boom Cylinders 460 1,010

Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 470 1,020

Counterweights:

4600 kg (10,140 lb) Counterweight 4600 10,140

7400 kg (16,310 lb) Counterweight 7400 16,310

Undercarriage:

Long Undercarriage 5020 11,070

Booms (including lines, pins, stick cylinder):

Reach Boom 5.9 m (19'4") 2050 4,520

Super Long Reach (SLR) Boom 10.2 m (33'6") 3190 7,020

Sticks (including lines, pins, bucket cylinder, bucket linkage):

Reach Stick R2.95CB1 (9'8") 1310 2,870

Reach Stick R3.6CB1 (11'10") 1500 3,310

Super Long Reach Stick 7.85 (25'9") 1640 3,610

Buckets (without linkage, with tips and side cutters):

1.54 m3 (2.01 yd3) HD CB Linkage 1200 2,630

1.76 m3 (2.30 yd3) HD CB Linkage 1290 2,840

0.57 m3 (0.75 yd3) DC A Linkage 390 850

0.74 m3 (0.97 yd3) General Duty (GD) A Linkage 460 1,010

Quick Couplers:

Pin Grabber Quick Coupler with Pins 530 2,650

Pin Grabber Quick Coupler without Pins 500 2,430

Dimensions All dimensions are approximate and may vary depending on bucket selection.

Boom Options Reach Boom

5.9 m (19'4")

Stick Options Reach Stick

R2.95CB (9'8") R3.6CB (11'10")

1 Machine Height:

Top of Cab Height 3000 mm 9'10" 3000 mm 9'10" Top of Global Navigation Satellite System (GNSS) Antenna Height (if installed)

3030 mm 9'11" 3030 mm 9'11"

Top of OPG Height 3140 mm 10'4" 3140 mm 10'4" Handrail Height 3000 mm 9'10" 3000 mm 9'10" With Boom/Stick/Bucket Installed 3250 mm 10'8" 3520 mm 11'7" With Boom/Stick Installed 3120 mm 10'3" 3310 mm 10'10" With Boom Installed 3000 mm 9'10" 3000 mm 9'10"

2 Machine Length:

With Boom/Stick/Bucket Installed 10 060 mm 33'0" 10 060 mm 33'0" With Boom/Stick Installed 10 040 mm 32'11" 10 060 mm 33'0" With Boom Installed 8720 mm 28'7" 8720 mm 28'7"

3 Upperframe Width 2940 mm 9'8" 2940 mm 9'8" 4 Tail Swing Radius 3000 mm 9'10" 3000 mm 9'10" 5 Counterweight Clearance 1060 mm 3'6" 1060 mm 3'6" 6 Ground Clearance 440 mm 1'5" 440 mm 1'5" 7 Track Length – Length to Center of Rollers 3830 mm 12'7" 3830 mm 12'7" 8 Track Length – Crawler Overall Length 4640 mm 15'3" 4640 mm 15'3" 9 Track Gauge 2590 mm 8'6" 2590 mm 8'6"

10 Undercarriage Width:

with 600 mm (24") Shoes 3190 mm 10'6" 3190 mm 10'6" with 700 mm (28") Shoes 3290 mm 10'10" 3290 mm 10'10" with 790 mm (31") Shoes with Steps 3380 mm 11'1" 3380 mm 11'1"

Bucket Type HD HD Bucket Capacity 1.54 m3 2.01 yd3 1.54 m3 2.01 yd3

Bucket Tip Radius 1660 mm 5'5" 1660 mm 5'5"

(continued on next page)

Dimensions (continued) All dimensions are approximate and may vary depending on bucket selection.

Boom Options SLR Boom

10.2 m (33'6")

Stick Options SLR Stick 7.85A (25'9")

1 Machine Height:

Top of Cab Height 3000 mm 9'10" Top of GNSS Antenna Height (if installed) 3030 mm 9'11" Top of OPG Height 3140 mm 10'4" Handrail Height 3000 mm 9'10" With Boom/Stick/Bucket Installed 3160 mm 10'4" With Boom/Stick Installed 3160 mm 10'4" With Boom Installed 3000 mm 9'10"

2 Machine Length:

With Boom/Stick/Bucket Installed 14 350 mm 47'1" With Boom/Stick Installed 14 350 mm 47'1" With Boom Installed 13 250 mm 43'6"

3 Upperframe Width 2940 mm 9'8" 4 Tail Swing Radius 3000 mm 9'10" 5 Counterweight Clearance 1060 mm 3'6" 6 Ground Clearance 440 mm 1'5" 7 Track Length – Length to Center of Rollers 3830 mm 12'7" 8 Track Length – Crawler Overall Length 4640 mm 15'3" 9 Track Gauge 2590 mm 8'6"

10 Undercarriage Width:

with 600 mm (24") Shoes 3190 mm 10'6" with 700 mm (28") Shoes 3290 mm 10'10" with 790 mm (31") Shoes with Steps 3380 mm 11'1"

Bucket Type DC Bucket Capacity 0.57 m3 0.75 yd3

Bucket Tip Radius 1070 mm 3'6"

Working Ranges and Forces All dimensions are approximate and may vary depending on bucket selection.

012345678910111213 –1 Meters

Meters

R3.6CB (11'10")

R2.95CB (9'8")

05101520253040 35 Feet

Feet

7 6

Boom Options Reach Boom

5.9 m (19'4")

Stick Options Reach Stick

R2.95CB (9'8") R3.6CB (11'10")

1 Maximum Digging Depth 6820 mm 22'5" 7470 mm 24'6"

2 Maximum Reach at Ground Line 10 120 mm 33'2" 10 730 mm 35'2"

3 Maximum Cutting Height 9680 mm 31'9" 9960 mm 32'8"

4 Maximum Loading Height 6610 mm 21'8" 6900 mm 22'8"

5 Minimum Loading Height 2390 mm 7'10" 1740 mm 5'9"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 6650 mm 21'10" 7330 mm 24'1"

7 Maximum Vertical Wall Digging Depth 5340 mm 17'6" 5960 mm 19'7"

Bucket Digging Force (ISO) 166 kN 37,320 lbf 166 kN 37,320 lbf

Stick Digging Force (ISO) 121 kN 27,200 lbf 105 kN 23,600 lbf

Bucket Digging Force (ISO) – Auto Dig Boost 180 kN 40,520 lbf 180 kN 40,520 lbf

Stick Digging Force (ISO) – Auto Dig Boost 131 kN 29,530 lbf 114 kN 25,630 lbf

Bucket Type HD HD

Bucket Capacity 1.54 m3 2.01 yd3 1.54 m3 2.01 yd3

Bucket Tip Radius 1660 mm 5'5" 1660 mm 5'5"

Working Ranges and Forces (continued) All dimensions are approximate and may vary depending on bucket selection.

121315 10 911 8 7 6 5 4 3 2 1 0 –2 –3–1 Meters

Meters

1416181920 17

7.85A (25'9")

Feet35 304045 25 20 15 10 5 –50506065 55

Feet

1 7

Boom Options SLR Boom

10.2 m (33'6")

Stick Options SLR Stick 7.85A (25'9")

1 Maximum Digging Depth 14 580 mm 47'10"

2 Maximum Reach at Ground Line 18 280 mm 60'0"

3 Maximum Cutting Height 14 210 mm 46'7"

4 Maximum Loading Height 12 150 mm 39'10"

5 Minimum Loading Height 1500 mm 4'11"

6 Maximum Depth Cut for 2440 mm (8'0") Level Bottom 14 480 mm 47'6"

7 Maximum Vertical Wall Digging Depth 13 980 mm 45'10"

Bucket Digging Force (ISO) 62 kN 13,830 lbf

Stick Digging Force (ISO) 45 kN 10,160 lbf

Bucket Type DC

Bucket Capacity 0.57 m3 0.75 yd3

Bucket Tip Radius 1070 mm 3'6"

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

2.95 m (9'8") 5.9 m (19'4") 790 mm (31") Triple Grouser Track Shoes 3830 mm (12'7")

R2.95CB1

2590 mm (8'6") 4640 mm (15'3")

3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *7100 *7100 *5900 *5900 6430 25'0" lb *14,650 *14,650 *13,050 *13,050 20'8"

6000 mm kg *7250 7200 *5650 5000 *5600 5000 7510 20'0" lb *15,850 15,400 *12,350 11,100 24'5"

4500 mm kg *9450 *9450 *8100 6950 7300 4950 *5600 4300 8180 15'0" lb *20,350 *20,350 *17,550 14,950 15,650 10,600 *12,300 9,450 26'9"

3000 mm kg *12 100 10 150 *9300 6650 7150 4800 *5800 3950 8540 10'0" lb *26,050 21,900 *20,150 14,300 15,350 10,300 *12,750 8,650 27'11"

1500 mm kg *14 450 9550 9800 6350 7000 4650 5700 3800 8610 5'0" lb *31,150 20,600 21,050 13,700 15,000 10,000 12,500 8,350 28'3"

0 mm kg 15 250 9250 9550 6150 6850 4550 5800 3850 8420 0'0" lb 32,700 19,900 20,550 13,250 14,750 9,750 12,800 8,500 27'7"

–1500 mm kg *11 350 *11 350 15 150 9150 9450 6050 6800 4500 6300 4150 7940 –5'0" lb *25,750 *25,750 32,450 19,700 20,300 13,050 14,650 9,650 13,900 9,200 26'0"

–3000 mm kg *18 550 18 400 *14 350 9250 9500 6100 7400 4850 7120 –10'0" lb *42,250 39,350 *31,050 19,850 20,400 13,100 16,400 10,800 23'2"

–4500 mm kg *16 000 *16 000 *11 750 9450 *8750 6600 5790 –15'0" lb *34,300 *34,300 *25,100 20,350 *19,250 14,850 18'8"

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

2.95 m (9'8") 5.9 m (19'4") 700 mm (28") Triple Grouser Track Shoes 3830 mm (12'7")

R2.95CB1

2590 mm (8'6") 4640 mm (15'3")

3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *7100 *7100 *5900 *5900 6430 25'0" lb *14,650 *14,650 *13,050 *13,050 20'8"

6000 mm kg *7250 7100 *5650 4950 *5600 4950 7510 20'0" lb *15,850 15,250 *12,350 10,950 24'5"

4500 mm kg *9450 *9450 *8100 6900 7200 4850 *5600 4250 8180 15'0" lb *20,350 *20,350 *17,550 14,800 15,500 10,450 *12,300 9,350 26'9"

3000 mm kg *12 100 10 050 *9300 6600 7050 4750 5800 3900 8540 10'0" lb *26,050 21,650 *20,150 14,150 15,150 10,150 *12,750 8,550 27'11"

1500 mm kg *14 450 9450 9650 6300 6900 4600 5600 3750 8610 5'0" lb *31,150 20,350 20,800 13,550 14,850 9,850 12,350 8,250 28'3"

0 mm kg 15 100 9150 9450 6100 6800 4450 5750 3800 8420 0'0" lb 32,300 19,650 20,300 13,100 14,550 9,600 12,650 8,400 27'7"

–1500 mm kg *11 350 *11 350 15 000 9050 9350 6000 6750 4450 6200 4100 7940 –5'0" lb *25,750 *25,750 32,050 19,450 20,050 12,900 14,500 9,550 13,700 9,050 26'0"

–3000 mm kg *18 550 18 200 *14 350 9100 9350 6000 7300 4800 7120 –10'0" lb *42,250 38,900 *31,050 19,600 20,150 12,950 16,200 10,650 23'2"

–4500 mm kg *16 000 *16 000 *11 750 9350 *8750 6550 5790 –15'0" lb *34,300 *34,300 *25,100 20,150 *19,250 14,700 18'8"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

2.95 m (9'8") 5.9 m (19'4") 600 mm (24") Single Grouser Track Shoes 3830 mm (12'7")

R2.95CB1

2590 mm (8'6") 4640 mm (15'3")

3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" mm ft/in

7500 mm kg *7100 7050 *5900 *5900 6430 25'0" lb *14,650 *14,650 *13,050 *13,050 20'8"

6000 mm kg *7250 7000 *5650 4850 *5600 4850 7510 20'0" lb *15,850 15,050 *12,350 10,800 24'5"

4500 mm kg *9450 *9450 *8100 6800 7100 4800 *5600 4150 8180 15'0" lb *20,350 *20,350 *17,550 14,600 15,250 10,300 *12,300 9,200 26'9"

3000 mm kg *12 100 9900 *9300 6500 6950 4650 5700 3850 8540 10'0" lb *26,050 21,400 *20,150 13,950 14,950 10,000 12,550 8,400 27'11"

1500 mm kg *14 450 9300 9500 6200 6800 4500 5550 3700 8610 5'0" lb *31,150 20,050 20,450 13,350 14,600 9,700 12,150 8,150 28'3"

0 mm kg 14 850 9000 9300 6000 6650 4400 5650 3750 8420 0'0" lb 31,800 19,350 19,950 12,900 14,350 9,450 12,450 8,250 27'7"

–1500 mm kg *11 350 *11 350 14 750 8900 9200 5900 6600 4350 6100 4050 7940 –5'0" lb *25,750 *25,750 31,600 19,150 19,750 12,700 14,250 9,400 13,500 8,900 26'0"

–3000 mm kg *18 550 17 950 *14 350 9000 9200 5950 7200 4750 7120 –10'0" lb *42,250 38,350 *31,050 19,300 19,850 12,750 15,950 10,500 23'2"

–4500 mm kg *16 000 *16 000 *11 750 9200 *8750 6450 5790 –15'0" lb *34,300 *34,300 *25,100 19,850 *19,250 14,500 18'8"

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

3.6 m (11'10") 5.9 m (19'4") 790 mm (31") Triple Grouser Track Shoes 3830 mm (12'7")

R3.6CB2

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

7500 mm kg *4600 *4600 7210 25'0" lb *10,250 *10,250 23'3"

6000 mm kg *6000 5050 *4400 4350 8190 20'0" lb *12,600 10,800 *9,750 9,600 26'8"

4500 mm kg *7200 7000 *6750 4950 *4400 3800 8810 15'0" lb *15,650 15,100 *14,700 10,600 *9,700 8,350 28'9"

3000 mm kg *16 600 *16 600 *10 700 10 350 *8500 6700 7150 4750 *5200 3600 *4550 3500 9140 10'0" lb *35,300 *35,300 *23,050 22,250 *18,400 14,350 15,350 10,250 *10,000 7,700 29'11"

1500 mm kg *13 350 9600 9800 6350 6950 4600 5250 3500 *4850 3350 9210 5'0" lb *28,750 20,700 21,000 13,650 14,900 9,850 11,300 7,500 *10,650 7,400 30'2"

0 mm kg *7050 *7050 *14 950 9150 9500 6050 6800 4450 5200 3450 5150 3400 9030 0'0" lb *16,100 *16,100 *32,350 19,700 20,350 13,050 14,550 9,550 11,350 7,500 29'7"

–1500 mm kg *6450 *6450 *10 650 *10 650 14 950 9000 9300 5950 6700 4350 5500 3650 8590 –5'0" lb *14,450 *14,450 *24,150 *24,150 32,050 19,300 20,000 12,750 14,350 9,350 12,150 8,000 28'1"

–3000 mm kg *10 700 *10 700 *15 850 *15 850 *14 800 9000 9300 5900 6700 4350 6300 4150 7830 –10'0" lb *24,000 *24,000 *35,950 *35,950 *32,050 19,300 19,950 12,700 14,400 9,400 13,950 9,150 25'6"

–4500 mm kg *18 250 *18 250 *12 950 9150 9450 6000 8100 5250 6650 –15'0" lb *39,250 39,150 *27,850 19,700 20,300 13,000 *18,150 11,750 21'6"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

3.6 m (11'10") 5.9 m (19'4") 700 mm (28") Triple Grouser Track Shoes 3830 mm (12'7")

R3.6CB2

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

7500 mm kg *4600 *4600 7210 25'0" lb *10,250 *10,250 23'3"

6000 mm kg *6000 5000 *4400 4300 8190 20'0" lb *12,600 10,700 *9,750 9,500 26'8"

4500 mm kg *7200 6950 *6750 4900 *4400 3750 8810 15'0" lb *15,650 14,950 *14,700 10,450 *9,700 8,250 28'9"

3000 mm kg *16 600 *16 600 *10 700 10 250 *8500 6600 7050 4700 *5200 3550 *4550 3450 9140 10'0" lb *35,300 *35,300 *23,050 22,050 *18,400 14,200 15,150 10,100 *10,000 7,600 29'11"

1500 mm kg *13 350 9500 9650 6250 6850 4550 5200 3450 *4850 3350 9210 5'0" lb *28,750 20,450 20,750 13,450 14,750 9,750 11,150 7,400 *10,650 7,300 30'2"

0 mm kg *7050 *7050 *14 950 9050 9350 6000 6700 4400 5150 3400 5100 3350 9030 0'0" lb *16,100 *16,100 32,150 19,450 20,100 12,900 14,400 9,400 11,200 7,400 29'7"

–1500 mm kg *6450 *6450 *10 650 *10 650 14 800 8850 9200 5850 6600 4300 5450 3600 8590 –5'0" lb *14,450 *14,450 *24,150 *24,150 31,650 19,050 19,750 12,600 14,200 9,250 12,000 7,900 28'1"

–3000 mm kg *10 700 *10 700 *15 850 *15 850 14 800 8850 9200 5850 6600 4300 6250 4100 7830 –10'0" lb *24,000 *24,000 *35,950 *35,950 31,650 19,050 19,700 12,550 14,250 9,300 13,800 9,000 25'6"

–4500 mm kg *18 250 18 100 *12 950 9050 9300 5950 8000 5200 6650 –15'0" lb *39,250 38,650 *27,850 19,450 20,050 12,850 17,950 11,600 21'6"

Reach Boom Lift Capacities – Counterweight: 4.6 mt (10,140 lb) – without Bucket, Heavy Lift: On

3.6 m (11'10") 5.9 m (19'4") 600 mm (24") Single Grouser Track Shoes 3830 mm (12'7")

R3.6CB2

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

7500 mm kg *4600 *4600 7210 25'0" lb *10,250 *10,250 23'3"

6000 mm kg *6000 4900 *4400 4200 8190 20'0" lb *12,600 10,550 *9,750 9,350 26'8"

4500 mm kg *7200 6850 *6750 4800 *4400 3700 8810 15'0" lb *15,650 14,750 *14,700 10,300 *9,700 8,100 28'9"

3000 mm kg *16 600 *16 600 *10 700 10 100 *8500 6500 6950 4650 *5200 3500 *4550 3400 9140 10'0" lb *35,300 *35,300 *23,050 21,750 *18,400 14,000 14,900 9,950 *10,000 7,450 29'11"

1500 mm kg *13 350 9350 9500 6150 6750 4450 5100 3400 *4850 3300 9210 5'0" lb *28,750 20,150 20,450 13,250 14,500 9,600 11,000 7,300 *10,650 7,200 30'2"

0 mm kg *7050 *7050 14 800 8900 9200 5900 6600 4300 5050 3350 5000 3300 9030 0'0" lb *16,100 *16,100 31,650 19,150 19,800 12,700 14,150 9,250 11,050 7,250 29'7"

–1500 mm kg *6450 *6450 *10 650 *10 650 14 550 8750 9050 5750 6500 4250 5350 3550 8590 –5'0" lb *14,450 *14,450 *24,150 *24,150 31,150 18,750 19,450 12,400 13,950 9,100 11,800 7,750 28'1"

–3000 mm kg *10 700 *10 700 *15 850 *15 850 14 550 8750 9050 5750 6500 4250 6150 4000 7830 –10'0" lb *24,000 *24,000 *35,950 *35,950 31,200 18,800 19,400 12,350 14,000 9,150 13,550 8,850 25'6"

–4500 mm kg *18 250 17 800 *12 950 8900 9150 5850 7900 5100 6650 –15'0" lb *39,250 38,100 *27,850 19,150 19,750 12,650 17,650 11,450 21'6"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off

7.85 m (25'9") 10.2 m (33'6") 790 mm (31") Triple Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

12 000 mm kg *1300 *1300 13 940 40'0" lb *2,850 *2,850 45'3"

10 500 mm kg *1250 *1250 14 930 35'0" lb *2,700 *2,700 48'7"

9000 mm kg *1200 *1200 15 720 30'0" lb *2,650 *2,650 51'4"

7500 mm kg *1200 *1200 16 330 25'0" lb *2,650 *2,650 53'5"

6000 mm kg *1200 *1200 16 780 20'0" lb *2,650 *2,650 54'11"

4500 mm kg *1250 *1250 17 090 15'0" lb *2,700 *2,700 56'0"

3000 mm kg *4800 *4800 *3150 *3150 *1300 *1300 17 260 10'0" lb *6,850 *6,850 *2,800 *2,800 56'7"

1500 mm kg *1500 *1500 *5400 *5400 *5700 *5700 *4400 *4400 *3650 *3650 *1350 *1350 17 300 5'0" lb *3,500 *3,500 *12,750 *12,750 *12,200 *12,200 *9,450 *9,450 *7,850 *7,850 *2,900 *2,900 56'8"

0 mm kg *1600 *1600 *3600 *3600 *6600 6400 *5000 4850 *4050 3800 *1400 1350 17 200 0'0" lb *3,600 *3,600 *8,250 *8,250 *14,250 13,850 *10,800 10,400 *8,750 8,200 *3,050 2,950 56'5"

–1500 mm kg *1550 *1550 *2050 *2050 *3450 *3450 *6500 5900 *5500 4450 *4450 3550 *1500 1350 16 970 –5'0" lb *3,400 *3,400 *4,600 *4,600 *7,850 *7,850 *14,950 12,750 *11,900 9,650 *9,600 7,600 *3,300 2,950 55'7"

–3000 mm kg *2150 *2150 *2650 *2650 *3800 *3800 *6200 5650 *5900 4250 *4750 3350 *1650 1350 16 610 –10'0" lb *4,750 *4,750 *5,900 *5,900 *8,550 *8,550 *14,100 12,150 *12,700 9,100 *10,250 7,200 *3,550 3,000 54'5"

–4500 mm kg *2750 *2750 *3250 *3250 *4350 *4350 *6500 5500 *6100 4100 *4950 3200 *1800 1450 16 090 –15'0" lb *6,100 *6,100 *7,300 *7,300 *9,800 *9,800 *14,750 11,850 *13,200 8,800 *10,700 6,900 *3,950 3,150 52'8"

–6000 mm kg *3350 *3350 *3950 *3950 *5050 *5050 *7150 5500 *6200 4050 *5050 3150 *2050 1550 15 410 –20'0" lb *7,500 *7,500 *8,800 *8,800 *11,400 *11,400 *16,250 11,850 *13,400 8,700 *10,900 6,800 *4,500 3,350 50'4"

–7500 mm kg *4050 *4050 *4700 *4700 *5900 *5900 *7800 5550 *6150 4050 *5050 3150 *2350 1700 14 540 –25'0" lb *9,000 *9,000 *10,550 *10,550 *13,300 *13,300 *16,850 11,950 *13,300 8,750 *10,900 6,800 *5,250 3,700 47'5"

–9000 mm kg *4750 *4750 *5550 *5550 *6900 *6900 *7450 5700 *5950 4150 *4900 3200 *2900 1900 13 450 –30'0" lb *10,650 *10,650 *12,450 *12,450 *15,650 *15,650 *16,100 12,250 *12,850 8,900 *10,550 6,950 *6,450 4,250 43'8"

–10 500 mm kg *5550 *5550 *6500 *6500 *8200 *8200 *6900 5900 *5550 4300 *4600 3350 *3150 2300 12 080 –35'0" lb *12,450 *12,450 *14,700 *14,700 *18,600 *18,600 *14,800 12,750 *11,900 9,250 *9,800 7,200 *6,900 5,200 39'0"

–12 000 mm kg *7650 *7650 *7700 *7700 *6000 *6000 *4850 4500 *3950 3550 *3300 3000 10 300 –40'0" lb *17,350 *17,350 *16,300 *16,300 *12,750 *12,750 *10,250 9,800 *8,300 7,700 *7,250 6,900 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off (continued)

7.85 m (25'9") 10.2 m (33'6") 790 mm (31") Triple Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

10 500 mm/35'0" 12 000 mm/40'0" 13 500 mm/45'0" 15 000 mm/50'0" 16 500 mm/55'0" mm ft/in

12 000 mm kg *1750 *1750 *1300 *1300 13 940 40'0" lb *3,050 *3,050 *2,850 *2,850 45'3"

10 500 mm kg *1900 *1900 *1250 *1250 14 930 35'0" lb *4,150 *4,150 *2,700 *2,700 48'7"

9000 mm kg *1900 *1900 *1950 *1950 *1200 *1200 15 720 30'0" lb *4,200 *4,200 *3,700 *3,700 *2,650 *2,650 51'4"

7500 mm kg *2000 *2000 *2000 *2000 *1200 *1200 16 330 25'0" lb *4,300 *4,300 *4,350 *4,350 *2,650 *2,650 53'5"

6000 mm kg *2100 *2100 *2050 *2050 *1600 *1600 *1200 *1200 16 780 20'0" lb *4,650 *4,650 *4,550 *4,550 *4,500 4,400 *2,650 *2,650 54'11"

4500 mm kg *2350 *2350 *2250 *2250 *2150 2000 *2000 1650 *1250 *1250 17 090 15'0" lb *5,100 *5,100 *4,850 *4,850 *4,700 4,250 *3,700 3,450 *2,700 *2,700 56'0"

3000 mm kg *2800 *2800 *2550 *2550 *2400 2350 *2250 1900 *2200 1550 *1300 *1300 17 260 10'0" lb *6,100 *6,100 *5,550 *5,550 *5,200 5,000 *4,950 4,050 *4,350 3,300 *2,800 *2,800 56'7"

1500 mm kg *3150 *3150 *2800 2700 *2550 2200 *2400 1850 *2300 1500 *1350 *1350 17 300 5'0" lb *6,800 *6,800 *6,050 5,750 *5,550 4,700 *5,200 3,900 *4,700 3,200 *2,900 *2,900 56'8"

0 mm kg *3450 3050 *3050 2500 *2750 2100 *2550 1750 2350 1450 *1400 1350 17 200 0'0" lb *7,450 6,600 *6,550 5,400 *5,950 4,450 *5,500 3,700 *4,700 3,100 *3,050 2,950 56'5"

–1500 mm kg *3750 2900 *3250 2400 *2900 2000 *2650 1650 2300 1400 *1500 1350 16 970 –5'0" lb *8,100 6,150 *7,050 5,100 *6,300 4,250 *5,750 3,550 *4,150 3,000 *3,300 2,950 55'7"

–3000 mm kg *3950 2750 *3450 2250 *3050 1900 2600 1600 *1850 1400 *1650 1350 16 610 –10'0" lb *8,600 5,850 *7,450 4,850 6,550 4,050 5,600 3,450 *3,550 3,000 54'5"

–4500 mm kg *4150 2650 3500 2200 3000 1850 2600 1600 *1800 1450 16 090 –15'0" lb *8,950 5,650 7,550 4,700 6,450 3,950 5,550 3,400 *3,950 3,150 52'8"

–6000 mm kg 4150 2550 3500 2150 2950 1850 2600 1600 *2050 1550 15 410 –20'0" lb 8,950 5,500 7,500 4,600 6,400 3,900 *5,150 3,400 *4,500 3,350 50'4"

–7500 mm kg 4150 2550 3500 2150 3000 1850 *2350 1700 14 540 –25'0" lb 8,950 5,500 7,500 4,600 6,450 3,950 *5,250 3,700 47'5"

–9000 mm kg *4150 2600 *3500 2200 *2900 1900 13 450 –30'0" lb *8,850 5,650 *7,500 4,750 *6,450 4,250 43'8"

–10 500 mm kg *3850 2750 *3150 2300 *3150 2300 12 080 –35'0" lb *8,150 5,900 *6,900 5,200 39'0"

–12 000 mm kg *3300 3000 10 300 –40'0" lb *7,250 6,900 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off

7.85 m (25'9") 10.2 m (33'6") 700 mm (28") Triple Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

12 000 mm kg *1300 *1300 13 940 40'0" lb *2,850 *2,850 45'3"

10 500 mm kg *1250 *1250 14 930 35'0" lb *2,700 *2,700 48'7"

9000 mm kg *1200 *1200 15 720 30'0" lb *2,650 *2,650 51'4"

7500 mm kg *1200 *1200 16 330 25'0" lb *2,650 *2,650 53'5"

6000 mm kg *1200 *1200 16 780 20'0" lb *2,650 *2,650 54'11"

4500 mm kg *1250 *1250 17 090 15'0" lb *2,700 *2,700 56'0"

3000 mm kg *4800 *4800 *3150 *3150 *1300 *1300 17 260 10'0" lb *6,850 *6,850 *2,800 *2,800 56'7"

1500 mm kg *1500 *1500 *5400 *5400 *5700 *5700 *4400 *4400 *3650 *3650 *1350 *1350 17 300 5'0" lb *3,500 *3,500 *12,750 *12,750 *12,200 *12,200 *9,450 *9,450 *7,850 *7,850 *2,900 *2,900 56'8"

0 mm kg *1600 *1600 *3600 *3600 *6600 6350 *5000 4800 *4050 3750 *1400 1350 17 200 0'0" lb *3,600 *3,600 *8,250 *8,250 *14,250 13,650 *10,800 10,300 *8,750 8,100 *3,050 2,900 56'5"

–1500 mm kg *1550 *1550 *2050 *2050 *3450 *3450 *6500 5850 *5500 4400 *4450 3500 *1500 1350 16 970 –5'0" lb *3,400 *3,400 *4,600 *4,600 *7,850 *7,850 *14,950 12,600 *11,900 9,500 *9,600 7,500 *3,300 2,900 55'7"

–3000 mm kg *2150 *2150 *2650 *2650 *3800 *3800 *6200 5550 *5900 4150 *4750 3300 *1650 1350 16 610 –10'0" lb *4,750 *4,750 *5,900 *5,900 *8,550 *8,550 *14,100 12,000 *12,700 9,000 *10,250 7,100 *3,550 2,950 54'5"

–4500 mm kg *2750 *2750 *3250 *3250 *4350 *4350 *6500 5450 *6100 4050 *4950 3200 *1800 1400 16 090 –15'0" lb *6,100 *6,100 *7,300 *7,300 *9,800 *9,800 *14,750 11,700 *13,200 8,700 *10,700 6,800 *3,950 3,100 52'8"

–6000 mm kg *3350 *3350 *3950 *3950 *5050 *5050 *7150 5400 *6200 4000 *5050 3100 *2050 1500 15 410 –20'0" lb *7,500 *7,500 *8,800 *8,800 *11,400 *11,400 *16,250 11,650 *13,400 8,550 10,900 6,700 *4,500 3,300 50'4"

–7500 mm kg *4050 *4050 *4700 *4700 *5900 *5900 *7800 5500 *6150 4000 *5050 3100 *2350 1650 14 540 –25'0" lb *9,000 *9,000 *10,550 *10,550 *13,300 *13,300 *16,850 11,800 *13,300 8,600 *10,900 6,700 *5,250 3,650 47'5"

–9000 mm kg *4750 *4750 *5550 *5550 *6900 *6900 *7450 5600 *5950 4100 *4900 3150 *2900 1900 13 450 –30'0" lb *10,650 *10,650 *12,450 *12,450 *15,650 *15,650 *16,100 12,100 *12,850 8,800 *10,550 6,850 *6,450 4,200 43'8"

–10 500 mm kg *5550 *5550 *6500 *6500 *8200 *8200 *6900 5850 *5550 4250 *4600 3300 *3150 2300 12 080 –35'0" lb *12,450 *12,450 *14,700 *14,700 *18,600 *18,600 *14,800 12,600 *11,900 9,150 *9,800 7,100 *6,900 5,100 39'0"

–12 000 mm kg *7650 *7650 *7700 *7700 *6000 *6000 *4850 4450 *3950 3500 *3300 2950 10 300 –40'0" lb *17,350 *17,350 *16,300 *16,300 *12,750 *12,750 *10,250 9,700 *8,300 7,600 *7,250 6,800 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off (continued)

7.85 m (25'9") 10.2 m (33'6") 700 mm (28") Triple Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

10 500 mm/35'0" 12 000 mm/40'0" 13 500 mm/45'0" 15 000 mm/50'0" 16 500 mm/55'0" mm ft/in

12 000 mm kg *1750 *1750 *1300 *1300 13 940 40'0" lb *3,050 *3,050 *2,850 *2,850 45'3"

10 500 mm kg *1900 *1900 *1250 *1250 14 930 35'0" lb *4,150 *4,150 *2,700 *2,700 48'7"

9000 mm kg *1900 *1900 *1950 *1950 *1200 *1200 15 720 30'0" lb *4,200 *4,200 *3,700 *3,700 *2,650 *2,650 51'4"

7500 mm kg *2000 *2000 *2000 *2000 *1200 *1200 16 330 25'0" lb *4,300 *4,300 *4,350 *4,350 *2,650 *2,650 53'5"

6000 mm kg *2100 *2100 *2050 2050 *1600 *1600 *1200 *1200 16 780 20'0" lb *4,650 *4,650 *4,550 *4,550 *4,500 4,350 *2,650 *2,650 54'11"

4500 mm kg *2350 *2350 *2250 *2250 *2150 2000 *2000 1600 *1250 *1250 17 090 15'0" lb *5,100 *5,100 *4,850 *4,850 *4,700 4,200 *3,700 3,400 *2,700 *2,700 56'0"

3000 mm kg *2800 *2800 *2550 *2550 *2400 2300 *2250 1900 *2200 1550 *1300 *1300 17 260 10'0" lb *6,100 *6,100 *5,550 *5,550 *5,200 4,900 *4,950 4,000 *4,350 3,250 *2,800 *2,800 56'7"

1500 mm kg *3150 *3150 *2800 2650 *2550 2200 *2400 1800 *2300 1500 *1350 *1350 17 300 5'0" lb *6,800 *6,800 *6,050 5,700 *5,550 4,650 *5,200 3,850 *4,700 3,150 *2,900 *2,900 56'8"

0 mm kg *3450 3050 *3050 2500 *2750 2050 *2550 1700 2350 1450 *1400 1350 17 200 0'0" lb *7,450 6,500 *6,550 5,300 *5,950 4,400 *5,500 3,650 *4,700 3,050 *3,050 2,900 56'5"

–1500 mm kg *3750 2850 *3250 2350 *2900 1950 2650 1650 2300 1400 *1500 1350 16 970 –5'0" lb *8,100 6,100 *7,050 5,000 *6,300 4,200 5,650 3,500 *4,150 2,950 *3,300 2,900 55'7"

–3000 mm kg *3950 2700 *3450 2250 3000 1900 2600 1600 *1850 1350 *1650 1350 16 610 –10'0" lb *8,600 5,750 *7,450 4,750 6,450 4,000 5,550 3,400 *3,550 2,950 54'5"

–4500 mm kg *4150 2600 3500 2150 2950 1800 2550 1550 *1800 1400 16 090 –15'0" lb *8,950 5,550 7,450 4,600 6,350 3,900 5,500 3,350 *3,950 3,100 52'8"

–6000 mm kg 4100 2550 3450 2100 2950 1800 2550 1550 *2050 1500 15 410 –20'0" lb 8,850 5,450 7,400 4,550 6,300 3,850 *5,150 3,350 *4,500 3,300 50'4"

–7500 mm kg 4100 2550 3450 2100 2950 1800 *2350 1650 14 540 –25'0" lb 8,850 5,450 7,400 4,550 6,350 3,900 *5,250 3,650 47'5"

–9000 mm kg 4150 2600 3500 2150 *2900 1900 13 450 –30'0" lb *8,850 5,550 *7,500 4,650 *6,450 4,200 43'8"

–10 500 mm kg *3850 2700 *3150 2300 *3150 2300 12 080 –35'0" lb *8,150 5,800 *6,900 5,100 39'0"

–12 000 mm kg *3300 2950 10 300 –40'0" lb *7,250 6,800 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off

7.85 m (25'9") 10.2 m (33'6") 600 mm (24") Single Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0" 9000 mm/30'0" mm ft/in

12 000 mm kg *1300 *1300 13 940 40'0" lb *2,850 *2,850 45'3"

10 500 mm kg *1250 *1250 14 930 35'0" lb *2,700 *2,700 48'7"

9000 mm kg *1200 *1200 15 720 30'0" lb *2,650 *2,650 51'4"

7500 mm kg *1200 *1200 16 330 25'0" lb *2,650 *2,650 53'5"

6000 mm kg *1200 *1200 16 780 20'0" lb *2,650 *2,650 54'11"

4500 mm kg *1250 *1250 17 090 15'0" lb *2,700 *2,700 56'0"

3000 mm kg *4800 *4800 *3150 *3150 *1300 *1300 17 260 10'0" lb *6,850 *6,850 *2,800 *2,800 56'7"

1500 mm kg *1500 *1500 *5400 *5400 *5700 *5700 *4400 *4400 *3650 *3650 *1350 1300 17 300 5'0" lb *3,500 *3,500 *12,750 *12,750 *12,200 *12,200 *9,450 *9,450 *7,850 *7,850 *2,900 2,900 56'8"

0 mm kg *1600 *1600 *3600 *3600 *6600 6250 *5000 4700 *4050 3700 *1400 1300 17 200 0'0" lb *3,600 *3,600 *8,250 *8,250 *14,250 13,450 *10,800 10,150 *8,750 7,950 *3,050 2,850 56'5"

–1500 mm kg *1550 *1550 *2050 *2050 *3450 *3450 *6500 5750 *5500 4350 *4450 3450 *1500 1300 16 970 –5'0" lb *3,400 *3,400 *4,600 *4,600 *7,850 *7,850 *14,950 12,400 *11,900 9,350 *9,600 7,400 *3,300 2,850 55'7"

–3000 mm kg *2150 *2150 *2650 *2650 *3800 *3800 *6200 5500 *5900 4100 *4750 3250 *1650 1300 16 610 –10'0" lb *4,750 *4,750 *5,900 *5,900 *8,550 *8,550 *14,100 11,800 *12,700 8,850 *10,250 6,950 *3,550 2,900 54'5"

–4500 mm kg *2750 *2750 *3250 *3250 *4350 *4350 *6500 5350 *6100 3950 *4950 3100 *1800 1400 16 090 –15'0" lb *6,100 *6,100 *7,300 *7,300 *9,800 *9,800 *14,750 11,500 *13,200 8,550 *10,700 6,700 *3,950 3,000 52'8"

–6000 mm kg *3350 *3350 *3950 *3950 *5050 *5050 *7150 5350 *6200 3900 5000 3050 *2050 1500 15 410 –20'0" lb *7,500 *7,500 *8,800 *8,800 *11,400 *11,400 *16,250 11,450 *13,400 8,400 10,750 6,600 *4,500 3,250 50'4"

–7500 mm kg *4050 *4050 *4700 *4700 *5900 *5900 *7800 5400 *6150 3950 5000 3050 *2350 1650 14 540 –25'0" lb *9,000 *9,000 *10,550 *10,550 *13,300 *13,300 *16,850 11,600 *13,300 8,450 10,750 6,600 *5,250 3,600 47'5"

–9000 mm kg *4750 *4750 *5550 *5550 *6900 *6900 *7450 5550 *5950 4000 *4900 3100 *2900 1850 13 450 –30'0" lb *10,650 *10,650 *12,450 *12,450 *15,650 *15,650 *16,100 11,900 *12,850 8,650 *10,550 6,700 *6,450 4,150 43'8"

–10 500 mm kg *5550 *5550 *6500 *6500 *8200 *8200 *6900 5750 *5550 4150 *4600 3250 *3150 2250 12 080 –35'0" lb *12,450 *12,450 *14,700 *14,700 *18,600 *18,600 *14,800 12,400 *11,900 9,000 *9,800 7,000 *6,900 5,050 39'0"

–12 000 mm kg *7650 *7650 *7700 *7700 *6000 *6000 *4850 4400 *3950 3450 *3300 2900 10 300 –40'0" lb *17,350 *17,350 *16,300 *16,300 *12,750 *12,750 *10,250 9,550 *8,300 7,500 *7,250 6,700 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.

SLR Boom Lift Capacities – Counterweight: 7.4 mt (16,310 lb) – without Bucket, Heavy Lift: Off (continued)

7.85 m (25'9") 10.2 m (33'6") 600 mm (24") Single Grouser Track Shoes 3830 mm (12'7")

7.85A

2590 mm (8'6") 4640 mm (15'3")

10 500 mm/35'0" 12 000 mm/40'0" 13 500 mm/45'0" 15 000 mm/50'0" 16 500 mm/55'0" mm ft/in

12 000 mm kg *1750 *1750 *1300 *1300 13 940 40'0" lb *3,050 *3,050 *2,850 *2,850 45'3"

10 500 mm kg *1900 *1900 *1250 *1250 14 930 35'0" lb *4,150 *4,150 *2,700 *2,700 48'7"

9000 mm kg *1900 *1900 *1950 *1950 *1200 *1200 15 720 30'0" lb *4,200 *4,200 *3,700 *3,700 *2,650 *2,650 51'4"

7500 mm kg *2000 *2000 *2000 *2000 *1200 *1200 16 330 25'0" lb *4,300 *4,300 *4,350 *4,350 *2,650 *2,650 53'5"

6000 mm kg *2100 *2100 *2050 2000 *1600 *1600 *1200 *1200 16 780 20'0" lb *4,650 *4,650 *4,550 *4,550 *4,500 4,300 *2,650 *2,650 54'11"

4500 mm kg *2350 *2350 *2250 *2250 *2150 1950 *2000 1600 *1250 *1250 17 090 15'0" lb *5,100 *5,100 *4,850 *4,850 *4,700 4,150 *3,700 3,300 *2,700 *2,700 56'0"

3000 mm kg *2800 *2800 *2550 *2550 *2400 2250 *2250 1850 *2200 1500 *1300 *1300 17 260 10'0" lb *6,100 *6,100 *5,550 *5,550 *5,200 4,850 *4,950 3,950 *4,350 3,200 *2,800 *2,800 56'7"

1500 mm kg *3150 *3150 *2800 2600 *2550 2150 *2400 1750 *2300 1450 *1350 1300 17 300 5'0" lb *6,800 *6,800 *6,050 5,600 *5,550 4,600 *5,200 3,750 *4,700 3,100 *2,900 2,900 56'8"

0 mm kg *3450 3000 *3050 2450 *2750 2050 *2550 1700 2300 1400 *1400 1300 17 200 0'0" lb *7,450 6,400 *6,550 5,250 *5,950 4,300 *5,500 3,600 *4,700 3,000 *3,050 2,850 56'5"

–1500 mm kg *3750 2800 *3250 2300 *2900 1900 2600 1600 2250 1350 *1500 1300 16 970 –5'0" lb *8,100 6,000 *7,050 4,950 *6,300 4,100 5,550 3,450 *4,150 2,900 *3,300 2,850 55'7"

–3000 mm kg *3950 2650 *3450 2200 2950 1850 2550 1550 *1850 1350 *1650 1300 16 610 –10'0" lb *8,600 5,650 *7,450 4,700 6,350 3,950 5,450 3,300 *3,550 2,900 54'5"

–4500 mm kg 4100 2550 3400 2100 2900 1800 2500 1550 *1800 1400 16 090 –15'0" lb 8,800 5,450 7,350 4,500 6,250 3,800 5,400 3,250 *3,950 3,000 52'8"

–6000 mm kg 4050 2500 3400 2050 2900 1750 2500 1550 *2050 1500 15 410 –20'0" lb 8,700 5,350 7,250 4,450 6,200 3,750 *5,150 3,250 *4,500 3,250 50'4"

–7500 mm kg 4050 2500 3400 2100 2900 1800 *2350 1650 14 540 –25'0" lb 8,700 5,350 7,250 4,450 6,250 3,800 *5,250 3,600 47'5"

–9000 mm kg 4100 2550 3450 2150 *2900 1850 13 450 –30'0" lb 8,800 5,450 7,400 4,600 *6,450 4,150 43'8"

–10 500 mm kg *3850 2650 *3150 2250 *3150 2250 12 080 –35'0" lb *8,150 5,700 *6,900 5,050 39'0"

–12 000 mm kg *3300 2900 10 300 –40'0" lb *7,250 6,700 32'10"

ISO 10567:2007

* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Bucket Specifications and Compatibility

Counterweight 4600 kg

(10,140 lb) 7400 kg

(16,310 lb)

Linkage Width Capacity Weight Fill Reach Boom SLR Boom mm in m3 yd3 kg lb % R2.95 (9'8") R3.6 (11'10") SLR 7.85 (25'9") Pin-On (No Quick Coupler) General Duty Capacity CB 600 24 0.63 0.83 700 1,543 100

CB 750 30 0.86 1.13 836 1,843 100

CB 900 36 1.09 1.43 943 2,079 100

CB 1050 42 1.34 1.75 1011 2,229 100

CB 1200 48 1.58 2.07 1106 2,439 100

CB 1350 54 1.83 2.40 1202 2,650 100

General Duty Capacity Wide Tips CB 600 24 0.63 0.83 697 1,537 100

CB 750 30 0.86 1.13 834 1,839 100

CB 900 36 1.09 1.43 941 2,075 100

CB 1050 42 1.34 1.75 1008 2,223 100

CB 1200 48 1.58 2.07 1104 2,434 100

CB 1350 54 1.83 2.40 1199 2,644 100

Heavy Duty CB 600 24 0.52 0.68 730 1,608 100

CB 750 30 0.71 0.93 848 1,869 100

CB 900 36 0.91 1.19 941 2,075 100

CB 1050 42 1.12 1.46 1035 2,283 100

CB 1200 48 1.33 1.74 1107 2,440 100

CB 1350 54 1.54 2.02 1205 2,657 100

CB 1500 60 1.76 2.30 1298 2,861 100

CB 1650 66 1.97 2.58 1375 3,031 100

Heavy Duty Power CB 1050 42 1.12 1.47 1065 2,347 100

CB 1200 48 1.33 1.73 1143 2,519 100

CB 1350 54 1.53 2.01 1246 2,748 100

Severe Duty CB 600 24 0.52 0.68 752 1,657 90

CB 750 30 0.71 0.93 912 2,010 90

CB 900 36 0.91 1.19 995 2,194 90

CB 1050 42 1.12 1.46 1094 2,411 90

CB 1200 48 1.33 1.74 1172 2,583 90

Ditch Cleaning 312, A 1200 48 0.57 0.74 364 803 100 312, A 1500 60 0.74 0.97 455 1,003 100 X

Maximum load with pin-on (payload + bucket) kg 3966 3429 1044 lb 8,744 7,560 2,302

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

X Not Recommended

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

Bucket Specifications and Compatibility (continued)

Counterweight 4600 kg

(10,140 lb) 7400 kg

(16,310 lb)

Linkage Width Capacity Weight Fill Reach Boom SLR Boom mm in m3 yd3 kg lb % R2.95 (9'8") R3.6 (11'10") SLR 7.85 (25'9") With Cat Pin Grabber Coupler General Duty Capacity CB 600 24 0.63 0.83 700 1,543 100

CB 750 30 0.86 1.13 836 1,843 100

CB 900 36 1.09 1.43 943 2,079 100

CB 1050 42 1.34 1.75 1011 2,229 100

CB 1200 48 1.58 2.07 1106 2,439 100

CB 1350 54 1.83 2.40 1202 2,650 100

General Duty Capacity Wide Tips CB 600 24 0.63 0.83 697 1,537 100

CB 750 30 0.86 1.13 834 1,839 100

CB 900 36 1.09 1.43 941 2,075 100

CB 1050 42 1.34 1.75 1008 2,223 100

CB 1200 48 1.58 2.07 1104 2,434 100

CB 1350 54 1.83 2.40 1199 2,644 100

Heavy Duty CB 600 24 0.52 0.68 730 1,608 100

CB 750 30 0.71 0.93 848 1,869 100

CB 900 36 0.91 1.19 941 2,075 100

CB 1050 42 1.12 1.46 1035 2,283 100

CB 1200 48 1.33 1.74 1107 2,440 100

CB 1350 54 1.54 2.02 1205 2,657 100

CB 1500 60 1.76 2.30 1298 2,861 100

CB 1650 66 1.97 2.58 1375 3,031 100

Heavy Duty Power CB 1050 42 1.12 1.47 1065 2,347 100

CB 1200 48 1.33 1.73 1143 2,519 100

CB 1350 54 1.53 2.01 1246 2,748 100

Heavy Duty Pin Grabber Performance CB 750 30 0.70 0.91 876 1,931 100

CB 1050 42 1.08 1.42 1105 2,436 100

CB 1200 48 1.28 1.68 1186 2,614 100

CB 1350 54 1.49 1.94 1292 2,849 100

CB 1500 60 1.69 2.21 1398 3,082 100

Severe Duty CB 600 24 0.52 0.68 752 1,657 90

CB 750 30 0.71 0.93 912 2,010 90

CB 900 36 0.91 1.19 995 2,194 90

CB 1050 42 1.12 1.46 1094 2,411 90

CB 1200 48 1.33 1.74 1172 2,583 90

Severe Duty Pin Grabber Performance CB 600 24 0.51 0.66 829 1,828 90

CB 900 36 0.88 1.16 1057 2,331 90

CB 1050 42 1.08 1.42 1165 2,568 90

CB 1200 48 1.28 1.68 1252 2,760 100

Maximum load with coupler (payload + bucket) kg 3440 2903 518 lb 7,583 6,399 1,141

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or

Bucket Specifications and Compatibility (continued)

Counterweight 4600 kg (10,140 lb)

Linkage Width Capacity Weight Fill Reach Boom mm in m3 yd3 kg lb % R2.95 (9'8") R3.6 (11'10")

PIN-ON, TRS23 S70

Heavy Duty – Grading CB 1800 71 1.15 1.50 783 1,726 100

CB 2000 79 1.30 1.70 948 2,090 100

Maximum load with pin-on (payload + bucket) kg 3,160 2,623 lb 6,967 5,783

With S70, TRS23 S70 Heavy Duty – Grading CB 1800 71 1.15 1.50 783 1,726 100

CB 2000 79 1.30 1.70 948 2,090 100

Maximum load with pin-on (payload + bucket) kg 2,875 2,338 lb 6,338 5,154

The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.

Capacity based on ISO 7451:2007.

Bucket weight with General Duty tips.

Maximum Material Density:

2100 kg/m3 (3,500 lb/yd3) 1800 kg/m3 (3,000 lb/yd3) 1500 kg/m3 (2,500 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) 900 kg/m3 (1,500 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or

Attachments Offering Guide Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

ü Match * Working range front only No Match

PIN-ON ATTACHMENTS

Counterweight 4600 kg (10,140 lb) Boom Type Reach Stick Length R2.95 (9'8") R3.6 (11'10") Hydraulic Hammers H120 GC ü ü

H120 GC S ü ü

H120 S ü ü

H130 GC ü ü

H130 GC S ü ü

H130 S ü ü

H140 S ü ü

Multi-Processors MP318 Concrete Cutter Jaw ü ü

MP318 Demolition Jaw ü ü

MP318 Pulverizer Jaw ü ü

MP318 Shear Jaw ü ü

MP318 Universal Jaw ü ü

MP324 Concrete Cutter Jaw ü ü

MP324 Demolition Jaw ü ü

MP324 Pulverizer Jaw ü ü*

MP324 Shear Jaw ü ü

MP324 Tank Shear Jaw ü ü

MP324 Universal Jaw ü ü

Demolition and Sorting Grapples G324 ü ü

G324 WH-1500 ü ü

G324 WH-1800 ü

G324 WH-2000 ü*

Mobile Scrap and Demolition Shears S3025 Flat Top ü ü

S3035 Flat Top ü*

Pulverizers P218 Secondary Pulverizer ü ü

P224 Secondary Pulverizer ü ü*

P318 Primary Pulverizer ü ü

P324 Primary Pulverizer ü ü*

Mulchers HM4015 ü ü

HM4815 ü ü

HM5515 ü ü

HM6015 ü ü

Compactors (Vibratory Plate) CVP110 ü ü

Rotary Cutters RC20 ü ü

RC30 ü ü

Attachments Offering Guide (continued) Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

1800 kg/m3 (3,000 lb/yd3) 1200 kg/m3 (2,000 lb/yd3) No Match

PIN-ON ATTACHMENTS

Counterweight 4600 kg (10,140 lb) Boom Type Reach Stick Length R2.95 (9'8") R3.6 (11'10") Orange Peel Grapples GSH425-750

GSH425-950

GSH425-1150

GSH440-950

GSH440-1150

GSH525-750

GSH525-950

GSH525-1150

Attachments Offering Guide (continued) Not all Attachments are available in all regions.