Attachment_8_-_Water_Main_and_Sewer_Submittal.pdf
PDF 255 KB Posted
- Attached to
- Bunkhouse Construction - Saratoga, WY
- Solicitation number
- 1282D719R0002
About this file
Sewer and Water Main Submittal for current Phase I Construction
View the file
Other files
Show all 25
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VINYLTECH AWWA C900-07
TECHNICAL DATA SUBMITTAL
CONFORMANCE
These specifications designate the requirements for manufacturing and installing Vinyltech AWWA C900 water pipe.
AWWA C900-07 - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100mm Through 300mm), for Water Transmission and Distribution AWWA C605 - Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water ASTM D1784 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds ASTM D3139 - Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals ASTM F477 - Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ASTM D2412 - Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading UNI-PUB-8 - Tapping Guide for AWWA C900 Pressure Pipe UNI-B-8 - Recommended Practice for the Direct Tap-ping of PVC Pressure Water Pipe (Nominal Diameters 6-12 inch)
PIPE COMPOUND
The pipe shall be extruded from compounds meeting (PVC1120) the requirements of Cell Classification 12454-B, as defined in ASTM D 1784, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. The PVC shall also be listed by the National Sanitation Foundation (NSF) for use in potable water.
PIPE
Vinyltech pipe shall be manufactured in accordance with AWWA C900-07.
GASKET JOINT
The gasket shall be reinforced with a steel band and meet the requirements of ASTM F477.
Vinyltech pipe shall have an integral bell end with a locked-in factory installed gasket and shall meet the joint requirements of ASTM D3139.
MARKING
The pipe shall be marked in accordance with AWWA C900 as in the following example.
a) Manufacturerʼs name and production codes
b) Nominal size, dimension ratio number, and
O.D. base (for example, 8” DR 18 CIS)
c) Materials cell classification (PVC1120)
d) AWWA pressure class (235 psi or 305 psi) and hydrostatic test pressure (T600, or T800)
e) AWWA designation number (AWWA C900-07)
f) National Sanitaion Foundation (NSF-61)
g) Production date and time code (VJHB10A 48:34)
h) FM Approvals (FM) logo, third party certification
(150 psi or 200 psi).
i) Underwriters Laboratories, Inc (UL) logo, third party certification (150 psi or 200 psi).
QUALITY CONTROL
Each length of the pipe including the bell shall be hydrostatically tested. The pipe shall meet all ad-ditional test requirements as described in AWWA C900. Our full time quality assurance staff continually administers a rigid program of tests to maintain the production of the best pipe products available.
INSTALLATION
Recommended installation procedure of Vinyltech Corporation and the Uni-Bell PVC Pipe Association are outlined in AWWA C605, Under-ground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water. The Uni-Bell Handbook of PVC Pipe is also an invaluable re-source guide for design and installation.
TAPPING
The consistent success of tapping PVC pressure pipe is contingent upon the use of proper proce-dures and equipment. Vinyltech recommends strict compliance with the requirements as speci-fied in UNI-B-8, UNI-PUB-8, and AWWA C605.
ASSEMBLING THE PIPE
Assembly of Vinyltech PVC water pipe is easily accomplished. A depth of entry mark is on each spigot end to serve as a visual check for rapid, accurate joint inspection. Do not over insert.
1) Remove any mud, sand, or other foreign matter from the belled and spigot ends of the pipe. Carefully clean the gasket area.
2) With a clean applicator (a brush or hand) lu-bricate the entire surface of the pipe from the spigot end to the depth of entry mark and the contact surface of the gasket with Vinyltech Brand Lubricant.
3) Brace the bell to avoid disturbing the already installed joints. Align the pipe, insert the spigot into the bell and push.
4) Do not insert past the entry mark line.
201 S. 61st Avenue • Phoenix, AZ 85043 602 233-0071 • 602 272-4847 Fax • www.vtpipe.com
Effective 04/10
VINYLTECH
PVC•P IPE
A W
W A
C -0
A W
W A
C -0
VINYLTECH AWWA C900-07
TECHNICAL DATA SUBMITTAL
• Factory installed, locked-in gasket
• The pipe bell forms over the gasket, making a perfect fit
• Avoids the possibility of installing the wrong gasket
• Reduces installation problems
• The locked-in gasket eliminates gas-ket roll-out during joining
• The gasket is molded vs. extruded and spliced
• Works equally well under pressure or vacuum
• Three sealing points achieved vs. two
• LEAK-PROOF JOINTS
• “THE WORLDS BEST JOINT”
CROSS SECTIONAL VIEW
THE RIEBER SEALING SYSTEM
The Rieber system provides a proven pipe joint with an excellent track record in the field. It is the fastest growing system in the world because of its many advantages.
201 S. 61st Avenue • Phoenix, AZ 85043 602 233-0071 • 602 272-4847 Fax • www.vtpipe.com
4 (100) 4.800 0.267 16 1020 251.6
6 (150) 6.900 0.383 16 440 521.2
8 (200) 9.050 0.503 20 200 903.0
10 (250) 11.100 0.617 12 240 1364.4
12 (300) 13.200 0.733 28 60-80 1935.8
OUTER
DIAMETER (IN)
MINIMUM
WALL (IN)
APPROXIMATE
WEIGHT (LB/100')
NOMINAL SIZE
(IN) (mm)
LIFTS PER
TRUCK
FEET PER
LIFT
4 (100) 4.800 0.343 16 1020 317.5
6 (150) 6.900 0.493 16 440 658.7
8 (200) 9.050 0.646 20 200 1139.7
10 (250) 11.100 0.793 12 240 1722.3
12 (300) 13.200 0.943 28 60-80 2445.5
OUTER
DIAMETER (IN)
MINIMUM
WALL (IN)
APPROXIMATE
WEIGHT (LB/100')
NOMINAL SIZE
(IN) (mm)
LIFTS PER
TRUCK
FEET PER
LIFT
SEALING POINTS
rr068534 Line rr068534 Line rr068534 Line rr068534 Line
Line
S E
W E
R P
IP
E
GRAVITY SEWER MAIN
TECHNICAL DATA SUBMITTAL
THE RIEBER SEALING SYSTEM
The Rieber system provides a proven pipe joint with an excellent track record in the field. It is the fastest growing system in the world because of its many advantages.
PIPE DIAGRAM
201 S. 61st Avenue � Phoenix, AZ 85043 602 233-0071 � 602 272-4847 Fax � www.vtpipe.com
• Factory installed, locked-in gasket
• The pipe bell forms over the gasket, making a perfect fit
• Avoids the possibility of installing the wrong gasket
• Reduces installation problems
• The locked-in gasket eliminates gasket roll-out during joining
• The gasket is molded vs. extruded and spliced
• Works equally well under pressure or vacuum
• Three sealing points achieved vs. two
• LEAK-PROOF JOINTS
� �THE WORLDS BEST JOINT�
NOMINAL SIZE
(IN) (mm)
OUTER
DIAMETER (IN)
MINIMUM
WALL (IN)
20' LENGTH
WEIGHT (LB/100')
13' LENGTH
WEIGHT (LB/100')
4 (100) 4.215 0.120 104.2 105.7
6 (150) 6.275 0.180 229.0 232.6
8 (200) 8.400 0.240 410.3 417.8
10 (250) 10.500 0.300 643.9 657.4
12 (300) 12.500 0.360 922.7 944.1
15 (375) 15.300 0.437 1361.0 1390.0
18 (450) 18.701 0.536 2095.0 2115.0
VINYLTECH
P V C • P I P E rr068534 Line rr068534 Line
Line
S E
W E
R P
IP
E
VINYLTECH SEWER PIPE
TECHNICAL DATA SUBMITTAL
CONFORMANCE
These specifications designate the requirements for manufacturing and installing Vinyltech PVC sewer pipe.
ASTM D 3034 - Standard Specification for Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings ASTM F 679 - Standard Specification for Poly (Vinyl Chloride) (PVC) Large Diameter Plastic Gravity Sewer Pipe and fittings ASTM D 3212 - Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals ASTM F 477 - Standard Specification for Elas-tomeric Seals (Gaskets) for Joining Plastic Pipe ASTM D 1784 - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlo-rinated Poly (Vinyl Chloride) (CPVC) Compounds ASTM D 2152 - Standard Test Method for Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion ASTM D 2444 - Standard Test Method for Determination of the Impact Resistance of Ther-moplastic Pipe and Fittings by Means of Tup (Falling Weight) ASTM D 2321 - Standard Practice for Under-ground Installation of Thermoplastic Pipe for Sewers and other Gravity-Flow Applications ASTM D 2412 - Standard Test Method for Determination of External Loading Characteris-tics of Plastic Pipe by Parallel-Plate Loading IAPMO (2128) - Vinyltech sewer pipe in sizes 4-15 inches has IAPMO listing and will conform to specified agencies requirements
PIPE COMPOUND
The pipe shall be extruded from compounds meeting the requirements of Cell Classification 12454-B, as defined in ASTM D 1784, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.
PIPE
Vinyltech pipe shall be manufactured in accor-dance with ASTM D 3034 SDR 35 (4"-15") and ASTMF 679 (18") (Wall Thickness T-1).
GASKET JOINT
The gasket shall be reinforced with a steel ring and meet the requirements of ASTM F477.
Vinyltech pipe shall have an integral bell end with a locked-in factory installed gasket and shall meet the requirements of ASTM D 3212.
MARKING
The pipe shall be marked in accordance with ASTM D 3034 and F 679.
QUALITY CONTROL
Requirements for manufacturing and testing are conducted in strict accordance with ASTM specifications and are outlined in ASTM D 3034 and F 679.
INSTALLATION
Recommended installation procedure of Vinyltech Corporation and the Uni-Bell PVC Pipe Association are outlined in ASTM D 2321, Underground Installation of Flexible Thermoplas-tic Sewer Pipe. Vinyltech recommends the Uni- Bell Handbook of PVC Pipe as an invaluable resource guide.
ASSEMBLING THE PIPE
Assembling of Vinyltech PVC Sewer Pipe is eas-ily accomplished by hand or by using a bar and block. A depth of entry mark is on each spigot end to serve as a visual check for rapid, accu-rate joint inspection. Do not over insert.
1) Remove any mud, sand, or other foreign matter from the belled and spigot ends of the pipe. Carefully clean the gasket area.
2) With a clean applicator (a brush or hand) lubricate the entire surface of the pipe from the spigot end to the depth of entry mark and the contact surface of the gasket with Vinyltech Brand Lubricant.
3) Brace the bell to avoid disturbing the already installed joints. Align the pipe, insert the spigot into the bell and push until the entry mark is reached. Do not insert past the entry mark line.
201 S. 61st Avenue � Phoenix, AZ 85043 602 233-0071 � 602 272-4847 Fax � www.vtpipe.com
VINYLTECH
P V C • P I P E
Effective 09/01
File details come from the government source that posted it.