064023 interior architectural woodwork.pdf

F5W61608 USPFO Warehouse Ohio Army National Guard Rev. 0 Defense Supply Center Columbus, Ohio 30 January 2009 Bid Final

INTERIOR ARCHITECTURAL WOODWORK 064023 - 1

SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK

PART 1 - GENERAL

1.1 SUMMARY

A. This Section includes the following:

1. Plastic-laminate cabinets.

2. Stainless steel countertops.

3. Solid-surfacing-material countertops.

B. Interior architectural woodwork includes wood furring, blocking, shims, and hanging strips unless concealed within other construction before woodwork installation.

1.2 SUBMITTALS

A. Product Data: For solid-surfacing material and cabinet hardware and accessories.

B. Shop Drawings: Show location of each item, dimensioned plans and elevations, large-scale details, attachment devices, and other components.

C. Samples:

1. Plastic-laminates, for each type, color, pattern, and surface finish.

2. Solid-surfacing materials.

D. LEED Submittals:

1. Product Data for Credit EQ 4.4:

a. For each composite-wood product used, documentation indicating that the bonding agent contains no urea formaldehyde.

b. For each adhesive used, documentation indicating that the adhesive contains no urea formaldehyde.

2. Certificates for Credit MR 7: Chain-of-custody certificates certifying that products specified to be made from certified wood comply with forest certification requirements. Include evidence that mill is certified for chain of custody by an FSC-accredited certification body.

a. Include statement indicating costs for each certified wood product.

E. Woodwork Quality Standard Compliance Certificates: AWI Quality Certification Program certificates.

Defense Supply Center Columbus, Ohio 30 January 2009 Bid Final

INTERIOR ARCHITECTURAL WOODWORK 064023 - 2

1.3 QUALITY ASSURANCE

A. Installer Qualifications: Fabricator of woodwork.

B. Quality Standard: Unless otherwise indicated, comply with AWI's "Architectural Woodwork Quality Standards."

1. Provide AWI Quality Certification Program labels and certificates for woodwork, including installation.

C. Forest Certification: Provide interior architectural woodwork produced from wood obtained from forests certified by an FSC-accredited certification body to comply with FSC STD-01-001, "FSC Principles and Criteria for Forest Stewardship."

1.4 PROJECT CONDITIONS

A. Environmental Limitations: Do not deliver or install woodwork until building is enclosed, wet work is complete, and HVAC system is operating and maintaining temperature and relative humidity at occupancy levels during the remainder of the construction period.

PART 2 - PRODUCTS

2.1 WOODWORK FABRICATORS

A. Fabricators: Subject to compliance with requirements, provide interior architectural woodwork by one of the following:

2.2 MATERIALS

A. High-Pressure Decorative Laminate: NEMA LD 3, grades as indicated or, if not indicated, as required by woodwork quality standard.

B. Solid-Surfacing Material: Homogeneous solid sheets of filled plastic resin complying with ISSFA-2.

1. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. Avonite, Inc.

b. Formica Corporation.

c. Nevamar Company, LLC; Decorative Products Div.

d. Swan Corporation (The).

Defense Supply Center Columbus, Ohio 30 January 2009 Bid Final

INTERIOR ARCHITECTURAL WOODWORK 064023 - 3

e. Wilsonart International; Div. of Premark International, Inc.

2.3 CABINET HARDWARE AND ACCESSORIES

A. General: Provide cabinet hardware and accessory materials associated with architectural woodwork, except for items specified in Division 8 Section "Door Hardware (Scheduled by Describing Products)."

B. Frameless Concealed Hinges (European Type): BHMA A156.9, B01602, 170degrees of opening.

C. Wire Pulls: Back mounted, solid metal, 5 inches long, 1-1/2 inches deep, and 5/16 inch in diameter.

D. Catches: Magnetic catches, BHMA A156.9, B03141.

E. Drawer Slides: BHMA A156.9, B05091.

1. Heavy Duty (Grade 1HD-100 and Grade 1HD-200): Side mounted; full-extension type; zinc-plated steel ball-bearing slides.

F. Door Locks: BHMA A156.11, E07121.

G. Drawer Locks: BHMA A156.11, E07041.

H. Grommets for cable passage through countertops: 1-inch OD, molded-plastic grom-mets with plastic cap.

I. Exposed Hardware Finishes: For exposed hardware, provide finish that complies with BHMA A156.18 for BHMA finish number indicated.

1. Satin Stainless Steel: BHMA 630.

2.4 MISCELLANEOUS MATERIALS

A. Furring, Blocking, Shims, and Hanging Strips: Softwood or hardwood lumber, fire-retardant-treated, kiln-dried to less than 15 percent moisture content.

B. Adhesives, General: Do not use adhesives that contain urea formaldehyde.

2.5 FABRICATION

A. General: Complete fabrication to maximum extent possible before shipment to Project site. Where necessary for fitting at site, provide allowance for scribing, trimming, and fitting.

Defense Supply Center Columbus, Ohio 30 January 2009 Bid Final

INTERIOR ARCHITECTURAL WOODWORK 064023 - 4

1. Interior Woodwork Grade: Custom.

2. Shop cut openings to maximum extent possible. Sand edges of cutouts to remove splinters and burrs. Seal edges of openings in countertops with a coat of varnish.

B. Plastic-Laminate Cabinets:

1. AWI Type of Cabinet Construction: Flush overlay.

2. Laminate Cladding for Exposed Surfaces: High-pressure decorative laminate as follows:

a. Horizontal Surfaces Other Than Tops: Grade HGS.

b. Postformed Surfaces: Grade HGP.

c. Vertical Surfaces: Grade HGS.

d. Edges: Grade HGS.

3. Materials for Semi exposed Surfaces Other Than Drawer Bodies: High-pressure decorative laminate, Grade VGS.

4. Drawer Sides and Backs: Thermoset decorative panels.

5. Drawer Bottoms: Thermoset decorative panels.

6. Colors, Patterns, and Finishes: As indicated on the drawings.

7. Provide dust panels of 1/4-inch plywood or tempered hardboard above compartments and drawers, unless located directly under tops.

C. Solid-Surfacing-Material Countertops:

1. Solid-Surfacing-Material Thickness: 1/2 inch.

2. Colors, Patterns, and Finishes: As indicated on the drawings.

3. Fabricate tops in one piece with loose backsplashes for field application.

Comply with solid-surfacing-material manufacturer's written recommendations for adhesives, sealers, fabrication, and finishing.

4. Install integral sink bowls in countertops in shop.

D. Stainless Steel Countertop: Provide 24-gage, 304 stainless steel with No. 4 finish, laminated to ¾ inch MDF in configurations indicated on the Drawings. Provide coun-tertop in single length and without sharp edges on the stainless steel.

2.6 SHOP FINISHING

A. Finish architectural woodwork at fabrication shop. Defer only final touchup, cleaning, and polishing until after installation.

B. Backpriming: Apply one coat of sealer or primer, compatible with finish coats, to concealed surfaces of woodwork. Apply two coats to back of paneling.

Defense Supply Center Columbus, Ohio 30 January 2009 Bid Final

INTERIOR ARCHITECTURAL WOODWORK 064023 - 5

PART 3 - EXECUTION

3.1 INSTALLATION

A. Before installation, condition woodwork to average prevailing humidity conditions in installation areas. Examine shop-fabricated work for completion and complete work as required, including removal of packing and backpriming.

B. Grade: Install woodwork to comply with requirements for the same grade specified in Part 2 for fabrication of type of woodwork involved.

C. Install woodwork level, plumb, true, and straight to a tolerance of 1/8 inch in 96 inches. Shim as required with concealed shims.

D. Scribe and cut woodwork to fit adjoining work, refinish cut surfaces, and repair damaged finish at cuts.

E. Anchor woodwork to anchors or blocking built in or directly attached to substrates.

Secure with countersunk, concealed fasteners and blind nailing as required for complete installation. Use fine finishing nails for exposed fastening, countersunk and filled flush with woodwork and matching final finish if transparent finish is indicated.

F. Cabinets: Install without distortion so doors and drawers fit openings properly and are accurately aligned. Adjust hardware to center doors and drawers in openings and to provide unencumbered operation.

1. Fasten wall cabinets through back, near top and bottom, at ends and not more than 16 inches o.c. with No. 10 wafer-head screws sized for 1-inch penetration into wood framing, blocking, or hanging strips.

G. Countertops: Anchor securely by screwing through corner blocks of base cabinets or other supports into underside of countertop. Caulk space between backsplash and wall with sealant specified in Division 7 Section "Joint Sealants."

END OF SECTION 064023