B.08.02_Att9_C2_VMF_Combined_-_MP_29_May_2019.docx

N’Djamena C2 Node & Faya VMF Chad

SECTION TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 01 22 00

PRICE AND PAYMENT PROCEDURES

12/18 Updated 29 May 2019

Payment items for the work of this contract for which contract job payments will be made are listed in the BID SCHEDULE and described below. All costs for items of work, which are not specifically mentioned to be included in a particular job or unit price payment item, are included in the listed job item most closely associated with the work involved.

The job price and payment made for each item listed constitutes full compensation for design and for furnishing all plant, labor, materials, and equipment, and performing any associated Contractor quality control, environmental protection, meeting safety requirements, tests and reports, and for performing all work required for which separate payment is not otherwise provided.

If there is any work required of this contract that is not associated with a base bid item description or bid option description, then the costs for that work shall be included in the first base bid item.1.4 BID SCHEDULE

1.4.1 Base Bid Item 0001: Construction of Vehicle Maintenance Facility, Faya, Chad Payment will be made for all items associated with the design and construction of the building shall be a pre-engineered metal building with two vehicle maintenance bays and one bay for admin. This includes all site work and utilities, specifications and drawings. This item does not include design and construction for Bid Option Items 0001 and 0002.

1.4.2 Base Bid Item 0002: Construction of Command and Control Fusion Center, N’Djamena,Chad Payment will be made for all items associated with the design and construction of a single story fusion center building with approximately 412 m2 of gross area as described in the scope of work. This includes all site work and utilities, specifications and drawings. This item does not include design and construction for Bid Option Items 0003, 0004, 0005 and 0006.

1.4.3 Bid Option 0001: One (1) Additional Maintenance Bay for Vehicle Maintenance Facility,Faya Payment will be made for all items associated with the design and construction of one (1) additional maintenance bay to be able to accommodate two (2) vehicles in depth.

1.4.4 Bid Option 0002: Water Tank for Vehicle Maintenance Facility,Faya Payment will be made for all work associated with the design and construction of a 5000 L Water Tank.

1.4.5 Bid Option 0003: Additional 120m2 of Office Cubical Space for Command and Control Fusion Center, N’Djamena Payment will be made for all items associated with the design and construction of an additional 120m2 of office cubical space as identified on the provided floor plan and as described in the statement of work, specifications, and drawings.

1.4.5 Bid Option 0004: Exterior Fence for Command and Control Fusion Center, N’Djamena Payment will be made for all items associated with the design and construction of a 2 m high perimeter fence with pedestrian and vehicle gate as described in the scope of work.

1.4.6 Bid Option 0005: Fuel Tank, System and Bollards for Command and Control Fusion Center, N’Djamena Payment will be made for all items associated with the design and construction and installation of the fuel tank and concrete pad, fuel distribution system, and bollards to protect fuel tank and existing generator(NIC) as described in the statement of work.

1.4.7 Bid Option 0006: Concrete Pad for Antenna for Command and Control Fusion Center, N’Djamena Payment will be made for all items associated with the design and construction of a concrete pad to mount antenna (NIC) and all associated works as described in the statement of work.

-- End of Section --

SECTION 01 22 00 Page 1