Technical_Exhibit_7.5.6.11_UMCS_Demarcation_List.docx

Technical Exhibit 7.5.6.11 UMCS Demarcation List Requirements and Responsibilities

· UMCS shall maintain, on a building-by-building basis, a demarcation listing of all components. Demarcation list shall indicate the full extent of the contractor’s responsibility plus any additions to the UMCS that may require contract modifications. An updated copy shall be delivered each month to the Government.

· UMCS shall repair all devices on Fort Gordon manufactured by Dorsett-Technologies, including those not connected to the central system, including, but not limited to, Infoscan Field Interface Cards (FICs), Field Interface Devices (FIDs), Infoscan Network Processors (INPs), Micro-Scan Controllers, Smart T-Stat, power supplies, and cables.

· Repair requirements include firmware, hardware, and software issues, and incorporate software and hardware component updates where applicable.

· UMCS is not responsible for major repairs on Uninterruptible Power supplies (UPS) or UPS Batteries.

· The Contractor shall be responsible for minimum repairs, field replacement, initiating work documents, and performing all necessary actions to facilitate repair using existing post services.

· The Contractor shall provide HVAC service on controls in areas that UMCS does not exist.

The following list of components is representative but not all inclusive:

Dorsett-Technologies Components and Upgrades

INFOSCAN

This unit replaces FID AC/DC supply and 8300 R-446 Unit All Devices: JID, MID, INP, MS4, MS5, Smart T-Stat.

1. All IFC Cards (Legacy)

2. All points on IFC cards up to control device.

3. All controls (AO&BO) up to I/P or damper/valve actuators and/or Relay.

MICRO-SCAN III

Description Part Number

Info-scan Network Processor 401-A-002-MR Upgrade Micro-scan Controller to EPROM 401-A-301UPG Upgrade Firmware version with EPROM 401-A-300EPROM

MICRO-SCAN 4

Description Part Number

MICRO-SCAN 5

Description Part Number MicroScan 5 xTalk communicator MS5-xTalk MicroScan 5 Universal Controller MS5-UNV-T-E

EXCLUSIONS

The following items are wholly excluded from this proposal scope and are expected to be repaired, replaced, or performed by others:

· Plumbing of any kind including installation of valve bodies, flow meters, etc. as required by UMCS repairs

· Power (>24VAC) circuits to pumps, fans or other equipment

· Instrument air compressors, dryers or regulators and associated piping and pneumatic tubing

· Non-DDC local controls

· Variable Frequency Drives

· Starters and HOAs

· Fire alarm system components including smoke and heat detectors and interlocks

· Intrusion Detection systems and security interlocks

· Combustion controls, water level controls and other self-contained controls for Boilers and Hot Water Generators

· Process Controls of any type including controls in the Water Treatment Plant, and Central Energy Plants Range Controls

· Instrumentation for local systems not covered

· Family Housing HVAC

· AAFES maintained HVAC systems

· Electrical control systems

· Fuel control systems

· Sheet Metal work as required for controls repairs

· Air filters or replacement of same

· All points on Johnson Controls (JID) systems (this includes monitor only and points in control loops)

· All DX chillers and boilers that are enabled thru the UMCS.

J&J Maintenance (EAMC)

J&J Maintenance is responsible for all points in Hospital Buildings.

1. Bldgs 300 301, 319, 320 322

2. Bldg 21712

3. Bldg 25501

4. Bldg 25712

5. Bldg 29605

6. Bldg 29709