RPE_SDS.pdf
PDF 32 KB Posted
- Attached to
- Competitive Selection OH|DOT801L26-2
- Contract number
- DOT801L26-2
- Issued by
- Ohio
About this file
This document is a Safety Data Sheet (SDS) for an Anionic Reduced Penetrating Emulsion (RPE) product issued by Asphalt Materials, Inc. with a revision date of 2/1/2019 and SDS Number AMI-223. The document provides regulatory information for a specialized asphalt emulsion product, with references to multiple state regulatory lists including Massachusetts Hazardous Substances List, Pennsylvania Right-To-Know List, and Texas Air Contaminants screening levels.
The product composition consists of 35-65% asphalt, 35-55% water, and small percentages of additional components like tall oil sodium salt and proprietary petroleum emulsifiers. The SDS indicates the product is not classified as a hazardous material by the U.S. Department of Transportation and, when discarded as produced, is not considered a RCRA hazardous waste. Disposal recommendations include recycling into asphalt pavement mixtures, converting to cold mix, or disposal in approved special waste, industrial waste, or construction debris landfills. The document emphasizes the generator's responsibility to fully characterize waste materials and consult state and local regulations for proper disposal.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISPOSAL CONSIDERATIONS13
Dispose in accordance with local, state, and federal regulations. After cooling, waste or contaminated asphalt mixtures may be scooped and stockpiled for later recycling into asphalt pavement mixtures, pugmilled into cold mix, or disposed in an approved special waste, industrial waste, or construction debris landfill.
RCRA Information:
This material, if discarded as produced, is not a RCRA "listed" or "characteristic" hazardous waste. Use which results in chemical or physical change or contamination may subject it to regulation as a hazardous waste. It is the responsibility of the generator to fully characterize for toxicity and other RCRA parameters prior to disposal (40 CFR 261). Along with properly characterizing all waste materials, consult state and local regulations regarding proper disposal of this material.
TRANSPORT INFORMATION14
This product as produced and shipped is not considered a hazardous material by the U.S. Department of Transportation.
REGULATORY INFORMATION15
Component (CAS#) [%] - CODES Asphalt (typical) (8052-42-4) [35-65%] MASS, NRC, PA, TSCA, TXAIR Water (7732-18-5) [35-55%] TSCA Tall oil, sodium salt (65997-01-5) [0-5%] TSCA Petroleum Emulsifier, Proprietary (0) [0-5%] Asphalt Additive C, Proprietary (0) [0-2%] Regulatory CODE Descriptions ---------------------------------------------------------------- MASS = MA Massachusetts Hazardous Substances List NRC = Nationally Recognized Carcinogens PA = PA Right-To-Know List of Hazardous Substances TSCA = Toxic Substances Control Act TXAIR = TX Air Contaminants with Health Effects Screening Level
OTHER INFORMATION16
Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained therein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each individual should make a determination as to the suitability of the information for their particular purpose(s).
Asphalt Materials, Inc.
Revision Date: 2/1/2019SDS Number: AMI-223 Page of5 5
Asphalt Materials, Inc.
ANIONIC RPE, ANIONIC REDUCED PENETRATING EMULSION
File details come from the government source that posted it. Updated .